diff --git a/tools/systemvm/debian/config/etc/dnsmasq.conf b/tools/systemvm/debian/config/etc/dnsmasq.conf new file mode 100644 index 00000000000..b908c2e4bee --- /dev/null +++ b/tools/systemvm/debian/config/etc/dnsmasq.conf @@ -0,0 +1,463 @@ +# Configuration file for dnsmasq. +# +# Format is one option per line, legal options are the same +# as the long options legal on the command line. See +# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. + +# The following two options make you a better netizen, since they +# tell dnsmasq to filter out queries which the public DNS cannot +# answer, and which load the servers (especially the root servers) +# uneccessarily. If you have a dial-on-demand link they also stop +# these requests from bringing up the link uneccessarily. + +# Never forward plain names (without a dot or domain part) +domain-needed +# Never forward addresses in the non-routed address spaces. +bogus-priv + + +# Uncomment this to filter useless windows-originated DNS requests +# which can trigger dial-on-demand links needlessly. +# Note that (amongst other things) this blocks all SRV requests, +# so don't use it if you use eg Kerberos. +# This option only affects forwarding, SRV records originating for +# dnsmasq (via srv-host= lines) are not suppressed by it. +#filterwin2k + +# Change this line if you want dns to get its upstream servers from +# somewhere other that /etc/resolv.conf +resolv-file=/etc/dnsmasq-resolv.conf + +# By default, dnsmasq will send queries to any of the upstream +# servers it knows about and tries to favour servers to are known +# to be up. Uncommenting this forces dnsmasq to try each query +# with each server strictly in the order they appear in +# /etc/resolv.conf +#strict-order + +# If you don't want dnsmasq to read /etc/resolv.conf or any other +# file, getting its servers from this file instead (see below), then +# uncomment this. +#no-resolv + +# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv +# files for changes and re-read them then uncomment this. +#no-poll + +# Add other name servers here, with domain specs if they are for +# non-public domains. +#server=/localnet/192.168.0.1 + +# Example of routing PTR queries to nameservers: this will send all +# address->name queries for 192.168.3/24 to nameserver 10.1.2.3 +#server=/3.168.192.in-addr.arpa/10.1.2.3 + +# Add local-only domains here, queries in these domains are answered +# from /etc/hosts or DHCP only. +local=/2.vmops-test.vmops.com/ + +# Add domains which you want to force to an IP address here. +# The example below send any host in doubleclick.net to a local +# webserver. +#address=/doubleclick.net/127.0.0.1 + +# If you want dnsmasq to change uid and gid to something other +# than the default, edit the following lines. +#user= +#group= + +# If you want dnsmasq to listen for DHCP and DNS requests only on +# specified interfaces (and the loopback) give the name of the +# interface (eg eth0) here. +# Repeat the line for more than one interface. +interface=eth0 +# Or you can specify which interface _not_ to listen on +except-interface=eth1 +except-interface=eth2 +except-interface=lo +# Or which to listen on by address (remember to include 127.0.0.1 if +# you use this.) +#listen-address= +# If you want dnsmasq to provide only DNS service on an interface, +# configure it as shown above, and then use the following line to +# disable DHCP on it. +no-dhcp-interface=eth1 +no-dhcp-interface=eth2 + +# On systems which support it, dnsmasq binds the wildcard address, +# even when it is listening on only some interfaces. It then discards +# requests that it shouldn't reply to. This has the advantage of +# working even when interfaces come and go and change address. If you +# want dnsmasq to really bind only the interfaces it is listening on, +# uncomment this option. About the only time you may need this is when +# running another nameserver on the same machine. +bind-interfaces + +# If you don't want dnsmasq to read /etc/hosts, uncomment the +# following line. +#no-hosts +# or if you want it to read another file, as well as /etc/hosts, use +# this. +#addn-hosts=/etc/banner_add_hosts + +# Set this (and domain: see below) if you want to have a domain +# automatically added to simple names in a hosts-file. +expand-hosts + +# Set the domain for dnsmasq. this is optional, but if it is set, it +# does the following things. +# 1) Allows DHCP hosts to have fully qualified domain names, as long +# as the domain part matches this setting. +# 2) Sets the "domain" DHCP option thereby potentially setting the +# domain of all systems configured by DHCP +# 3) Provides the domain part for "expand-hosts" +domain=2.vmops-test.vmops.com + +# Uncomment this to enable the integrated DHCP server, you need +# to supply the range of addresses available for lease and optionally +# a lease time. If you have more than one network, you will need to +# repeat this for each network on which you want to supply DHCP +# service. +dhcp-range=10.1.1.1,static +#dhcp-range=10.0.0.1,10.255.255.255 +dhcp-hostsfile=/etc/dhcphosts.txt + +# This is an example of a DHCP range where the netmask is given. This +# is needed for networks we reach the dnsmasq DHCP server via a relay +# agent. If you don't know what a DHCP relay agent is, you probably +# don't need to worry about this. +#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h + +# This is an example of a DHCP range with a network-id, so that +# some DHCP options may be set only for this network. +#dhcp-range=red,192.168.0.50,192.168.0.150 + +# Supply parameters for specified hosts using DHCP. There are lots +# of valid alternatives, so we will give examples of each. Note that +# IP addresses DO NOT have to be in the range given above, they just +# need to be on the same network. The order of the parameters in these +# do not matter, it's permissble to give name,adddress and MAC in any order + +# Always allocate the host with ethernet address 11:22:33:44:55:66 +# The IP address 192.168.0.60 +#dhcp-host=11:22:33:44:55:66,192.168.0.60 + +# Always set the name of the host with hardware address +# 11:22:33:44:55:66 to be "fred" +#dhcp-host=11:22:33:44:55:66,fred + +# Always give the host with ethernet address 11:22:33:44:55:66 +# the name fred and IP address 192.168.0.60 and lease time 45 minutes +#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m + +# Give the machine which says it's name is "bert" IP address +# 192.168.0.70 and an infinite lease +#dhcp-host=bert,192.168.0.70,infinite + +# Always give the host with client identifier 01:02:02:04 +# the IP address 192.168.0.60 +#dhcp-host=id:01:02:02:04,192.168.0.60 + +# Always give the host with client identifier "marjorie" +# the IP address 192.168.0.60 +#dhcp-host=id:marjorie,192.168.0.60 + +# Enable the address given for "judge" in /etc/hosts +# to be given to a machine presenting the name "judge" when +# it asks for a DHCP lease. +#dhcp-host=judge + +# Never offer DHCP service to a machine whose ethernet +# address is 11:22:33:44:55:66 +#dhcp-host=11:22:33:44:55:66,ignore + +# Ignore any client-id presented by the machine with ethernet +# address 11:22:33:44:55:66. This is useful to prevent a machine +# being treated differently when running under different OS's or +# between PXE boot and OS boot. +#dhcp-host=11:22:33:44:55:66,id:* + +# Send extra options which are tagged as "red" to +# the machine with ethernet address 11:22:33:44:55:66 +#dhcp-host=11:22:33:44:55:66,net:red + +# Send extra options which are tagged as "red" to +# any machine with ethernet address starting 11:22:33: +#dhcp-host=11:22:33:*:*:*,net:red + +# Ignore any clients which are specified in dhcp-host lines +# or /etc/ethers. Equivalent to ISC "deny unkown-clients". +# This relies on the special "known" tag which is set when +# a host is matched. +#dhcp-ignore=#known + +# Send extra options which are tagged as "red" to any machine whose +# DHCP vendorclass string includes the substring "Linux" +#dhcp-vendorclass=red,Linux + +# Send extra options which are tagged as "red" to any machine one +# of whose DHCP userclass strings includes the substring "accounts" +#dhcp-userclass=red,accounts + +# Send extra options which are tagged as "red" to any machine whose +# MAC address matches the pattern. +#dhcp-mac=red,00:60:8C:*:*:* + +# If this line is uncommented, dnsmasq will read /etc/ethers and act +# on the ethernet-address/IP pairs found there just as if they had +# been given as --dhcp-host options. Useful if you keep +# MAC-address/host mappings there for other purposes. +#read-ethers + +# Send options to hosts which ask for a DHCP lease. +# See RFC 2132 for details of available options. +# Common options can be given to dnsmasq by name: +# run "dnsmasq --help dhcp" to get a list. +# Note that all the common settings, such as netmask and +# broadcast address, DNS server and default route, are given +# sane defaults by dnsmasq. You very likely will not need +# any dhcp-options. If you use Windows clients and Samba, there +# are some options which are recommended, they are detailed at the +# end of this section. + +# Override the default route supplied by dnsmasq, which assumes the +# router is the same machine as the one running dnsmasq. +#dhcp-option=3,1.2.3.4 + +# Do the same thing, but using the option name +#dhcp-option=option:router,1.2.3.4 + +# Override the default route supplied by dnsmasq and send no default +# route at all. Note that this only works for the options sent by +# default (1, 3, 6, 12, 28) the same line will send a zero-length option +# for all other option numbers. +#dhcp-option=3 + +# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 +#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5 + +# Set the NTP time server address to be the same machine as +# is running dnsmasq +#dhcp-option=42,0.0.0.0 + +# Set the NIS domain name to "welly" +#dhcp-option=40,welly + +# Set the default time-to-live to 50 +#dhcp-option=23,50 + +# Set the "all subnets are local" flag +#dhcp-option=27,1 + +# Set the domain +dhcp-option=15,"2.vmops-test.vmops.com" + +# Send the etherboot magic flag and then etherboot options (a string). +#dhcp-option=128,e4:45:74:68:00:00 +#dhcp-option=129,NIC=eepro100 + +# Specify an option which will only be sent to the "red" network +# (see dhcp-range for the declaration of the "red" network) +# Note that the net: part must precede the option: part. +#dhcp-option = net:red, option:ntp-server, 192.168.1.1 + +# The following DHCP options set up dnsmasq in the same way as is specified +# for the ISC dhcpcd in +# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt +# adapted for a typical dnsmasq installation where the host running +# dnsmasq is also the host running samba. +# you may want to uncomment them if you use Windows clients and Samba. +#dhcp-option=19,0 # option ip-forwarding off +#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s) +#dhcp-option=45,0.0.0.0 # netbios datagram distribution server +#dhcp-option=46,8 # netbios node type +#dhcp-option=47 # empty netbios scope. + +# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client +# probably doesn't support this...... +#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com + +# Send RFC-3442 classless static routes (note the netmask encoding) +#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 + +# Send vendor-class specific options encapsulated in DHCP option 43. +# The meaning of the options is defined by the vendor-class so +# options are sent only when the client supplied vendor class +# matches the class given here. (A substring match is OK, so "MSFT" +# matches "MSFT" and "MSFT 5.0"). This example sets the +# mtftp address to 0.0.0.0 for PXEClients. +#dhcp-option=vendor:PXEClient,1,0.0.0.0 + +# Send microsoft-specific option to tell windows to release the DHCP lease +# when it shuts down. Note the "i" flag, to tell dnsmasq to send the +# value as a four-byte integer - that's what microsoft wants. See +# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true +dhcp-option=vendor:MSFT,2,1i + +# Send the Encapsulated-vendor-class ID needed by some configurations of +# Etherboot to allow is to recognise the DHCP server. +#dhcp-option=vendor:Etherboot,60,"Etherboot" + +# Send options to PXELinux. Note that we need to send the options even +# though they don't appear in the parameter request list, so we need +# to use dhcp-option-force here. +# See http://syslinux.zytor.com/pxe.php#special for details. +# Magic number - needed before anything else is recognised +#dhcp-option-force=208,f1:00:74:7e +# Configuration file name +#dhcp-option-force=209,configs/common +# Path prefix +#dhcp-option-force=210,/tftpboot/pxelinux/files/ +# Reboot time. (Note 'i' to send 32-bit value) +#dhcp-option-force=211,30i + +# Set the boot filename for BOOTP. You will only need +# this is you want to boot machines over the network and you will need +# a TFTP server; either dnsmasq's built in TFTP server or an +# external one. (See below for how to enable the TFTP server.) +#dhcp-boot=pxelinux.0 + +# Enable dnsmasq's built-in TFTP server +#enable-tftp + +# Set the root directory for files availble via FTP. +#tftp-root=/var/ftpd + +# Make the TFTP server more secure: with this set, only files owned by +# the user dnsmasq is running as will be send over the net. +#tftp-secure + +# Set the boot file name only when the "red" tag is set. +#dhcp-boot=net:red,pxelinux.red-net + +# An example of dhcp-boot with an external server: the name and IP +# address of the server are given after the filename. +#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3 + +# Set the limit on DHCP leases, the default is 150 +#dhcp-lease-max=150 + +# The DHCP server needs somewhere on disk to keep its lease database. +# This defaults to a sane location, but if you want to change it, use +# the line below. +#dhcp-leasefile=/var/lib/misc/dnsmasq.leases +leasefile-ro + +# Set the DHCP server to authoritative mode. In this mode it will barge in +# and take over the lease for any client which broadcasts on the network, +# whether it has a record of the lease or not. This avoids long timeouts +# when a machine wakes up on a new network. DO NOT enable this if there's +# the slighest chance that you might end up accidentally configuring a DHCP +# server for your campus/company accidentally. The ISC server uses +# the same option, and this URL provides more information: +# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php +#dhcp-authoritative + +# Run an executable when a DHCP lease is created or destroyed. +# The arguments sent to the script are "add" or "del", +# then the MAC address, the IP address and finally the hostname +# if there is one. +#dhcp-script=/bin/echo + +# Set the cachesize here. +#cache-size=150 + +# If you want to disable negative caching, uncomment this. +#no-negcache + +# Normally responses which come form /etc/hosts and the DHCP lease +# file have Time-To-Live set as zero, which conventionally means +# do not cache further. If you are happy to trade lower load on the +# server for potentially stale date, you can set a time-to-live (in +# seconds) here. +#local-ttl= + +# If you want dnsmasq to detect attempts by Verisign to send queries +# to unregistered .com and .net hosts to its sitefinder service and +# have dnsmasq instead return the correct NXDOMAIN response, uncomment +# this line. You can add similar lines to do the same for other +# registries which have implemented wildcard A records. +#bogus-nxdomain=64.94.110.11 + +# If you want to fix up DNS results from upstream servers, use the +# alias option. This only works for IPv4. +# This alias makes a result of 1.2.3.4 appear as 5.6.7.8 +#alias=1.2.3.4,5.6.7.8 +# and this maps 1.2.3.x to 5.6.7.x +#alias=1.2.3.0,5.6.7.0,255.255.255.0 + + +# Change these lines if you want dnsmasq to serve MX records. + +# Return an MX record named "maildomain.com" with target +# servermachine.com and preference 50 +#mx-host=maildomain.com,servermachine.com,50 + +# Set the default target for MX records created using the localmx option. +#mx-target=servermachine.com + +# Return an MX record pointing to the mx-target for all local +# machines. +#localmx + +# Return an MX record pointing to itself for all local machines. +#selfmx + +# Change the following lines if you want dnsmasq to serve SRV +# records. These are useful if you want to serve ldap requests for +# Active Directory and other windows-originated DNS requests. +# See RFC 2782. +# You may add multiple srv-host lines. +# The fields are ,,,, +# If the domain part if missing from the name (so that is just has the +# service and protocol sections) then the domain given by the domain= +# config option is used. (Note that expand-hosts does not need to be +# set for this to work.) + +# A SRV record sending LDAP for the example.com domain to +# ldapserver.example.com port 289 +#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 + +# A SRV record sending LDAP for the example.com domain to +# ldapserver.example.com port 289 (using domain=) +###domain=example.com +#srv-host=_ldap._tcp,ldapserver.example.com,389 + +# Two SRV records for LDAP, each with different priorities +#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 +#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 + +# A SRV record indicating that there is no LDAP server for the domain +# example.com +#srv-host=_ldap._tcp.example.com + +# The following line shows how to make dnsmasq serve an arbitrary PTR +# record. This is useful for DNS-SD. (Note that the +# domain-name expansion done for SRV records _does_not +# occur for PTR records.) +#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" + +# Change the following lines to enable dnsmasq to serve TXT records. +# These are used for things like SPF and zeroconf. (Note that the +# domain-name expansion done for SRV records _does_not +# occur for TXT records.) + +#Example SPF. +#txt-record=example.com,"v=spf1 a -all" + +#Example zeroconf +#txt-record=_http._tcp.example.com,name=value,paper=A4 + + +# For debugging purposes, log each DNS query as it passes through +# dnsmasq. +log-queries + +# Log lots of extra information about DHCP transactions. +#log-dhcp + +log-facility=/var/log/dnsmasq.log + +# Include a another lot of configuration options. +#conf-file=/etc/dnsmasq.more.conf +conf-dir=/etc/dnsmasq.d diff --git a/tools/systemvm/debian/config/etc/httpd/conf/httpd.conf b/tools/systemvm/debian/config/etc/httpd/conf/httpd.conf new file mode 100644 index 00000000000..e11384ef772 --- /dev/null +++ b/tools/systemvm/debian/config/etc/httpd/conf/httpd.conf @@ -0,0 +1,990 @@ +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information. +# In particular, see +# +# for a discussion of each configuration directive. +# +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "/etc/httpd" will be interpreted by the +# server as "/etc/httpd/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# Don't give away too much information about all the subcomponents +# we are running. Comment out this line if you don't mind remote sites +# finding out what major optional modules you are running +ServerTokens OS + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation +# (available at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +ServerRoot "/etc/httpd" + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +PidFile run/httpd.pid + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 120 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive Off + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# ServerLimit: maximum value for MaxClients for the lifetime of the server +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 8 +MinSpareServers 5 +MaxSpareServers 20 +ServerLimit 256 +MaxClients 256 +MaxRequestsPerChild 4000 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 2 +MaxClients 150 +MinSpareThreads 25 +MaxSpareThreads 75 +ThreadsPerChild 25 +MaxRequestsPerChild 0 + + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, in addition to the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) +# +#Listen 12.34.56.78:80 +Listen 10.1.1.1:80 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_alias_module modules/mod_authn_alias.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_default_module modules/mod_authn_default.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_default_module modules/mod_authz_default.so +LoadModule ldap_module modules/mod_ldap.so +LoadModule authnz_ldap_module modules/mod_authnz_ldap.so +LoadModule include_module modules/mod_include.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule logio_module modules/mod_logio.so +LoadModule env_module modules/mod_env.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule expires_module modules/mod_expires.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule headers_module modules/mod_headers.so +LoadModule usertrack_module modules/mod_usertrack.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule mime_module modules/mod_mime.so +LoadModule dav_module modules/mod_dav.so +LoadModule status_module modules/mod_status.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule info_module modules/mod_info.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule dir_module modules/mod_dir.so +LoadModule actions_module modules/mod_actions.so +LoadModule speling_module modules/mod_speling.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule alias_module modules/mod_alias.so +LoadModule rewrite_module modules/mod_rewrite.so +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule cache_module modules/mod_cache.so +LoadModule suexec_module modules/mod_suexec.so +LoadModule disk_cache_module modules/mod_disk_cache.so +LoadModule file_cache_module modules/mod_file_cache.so +LoadModule mem_cache_module modules/mod_mem_cache.so +LoadModule cgi_module modules/mod_cgi.so + +# +# The following modules are not loaded by default: +# +#LoadModule cern_meta_module modules/mod_cern_meta.so +#LoadModule asis_module modules/mod_asis.so + +# +# Load config files from the config directory "/etc/httpd/conf.d". +# +Include conf.d/*.conf + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# . On SCO (ODT 3) use "User nouser" and "Group nogroup". +# . On HPUX you may not be able to use shared memory as nobody, and the +# suggested workaround is to create a user www and use that user. +# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) +# when the value of (unsigned)Group is above 60000; +# don't use Group #-1 on these systems! +# +User apache +Group apache + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin root@localhost + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If this is not set to valid DNS name for your host, server-generated +# redirections will not work. See also the UseCanonicalName directive. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address anyway, and this will make +# redirections work in a sensible way. +# +#ServerName www.example.com:80 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/var/www/html" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# + + Options FollowSymLinks + AllowOverride None + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + +# +# Possible values for the Options directive are "None", "All", +# or any combination of: +# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# +# The Options directive is both complicated and important. Please see +# http://httpd.apache.org/docs/2.2/mod/core.html#options +# for more information. +# + Options Indexes FollowSymLinks + +# +# AllowOverride controls what directives may be placed in .htaccess files. +# It can be "All", "None", or any combination of the keywords: +# Options FileInfo AuthConfig Limit +# + AllowOverride All + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + + + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# +# The path to the end user account 'public_html' directory must be +# accessible to the webserver userid. This usually means that ~userid +# must have permissions of 711, ~userid/public_html must have permissions +# of 755, and documents contained therein must be world-readable. +# Otherwise, the client will only receive a "403 Forbidden" message. +# +# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden +# + + # + # UserDir is disabled by default since it can confirm the presence + # of a username on the system (depending on home directory + # permissions). + # + UserDir disable + + # + # To enable requests to /~user/ to serve the user's public_html + # directory, remove the "UserDir disable" line above, and uncomment + # the following line instead: + # + #UserDir public_html + + + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# +# +# AllowOverride FileInfo AuthConfig Limit +# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec +# +# Order allow,deny +# Allow from all +# +# +# Order deny,allow +# Deny from all +# +# + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +# The index.html.var file (a type-map) is used to deliver content- +# negotiated documents. The MultiViews Option can be used for the +# same purpose, but it is much slower. +# +DirectoryIndex index.html index.html.var + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig /etc/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# + +# MIMEMagicFile /usr/share/magic.mime + MIMEMagicFile conf/magic + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# EnableMMAP: Control whether memory-mapping is used to deliver +# files (assuming that the underlying OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. On some systems, turning it off (regardless of +# filesystem) can improve performance; for details, please see +# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap +# +#EnableMMAP off + +# +# EnableSendfile: Control whether the sendfile kernel support is +# used to deliver files (assuming that the OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. Please see +# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile +# +#EnableSendfile off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this +# requires the mod_logio module to be loaded. +#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a +# container, they will be logged here. Contrariwise, if you *do* +# define per- access logfiles, transactions will be +# logged therein and *not* in this file. +# +#CustomLog logs/access_log common + +# +# If you would like to have separate agent and referer logfiles, uncomment +# the following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# For a single logfile with access, agent, and referer information +# (Combined Logfile Format), use the following directive: +# +CustomLog logs/access_log combined + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/". If the fakename is slash-terminated, then the +# realname must also be slash terminated, and if the fakename omits the +# trailing slash, the realname must also omit it. +# +# We include the /icons/ alias for FancyIndexed directory listings. If you +# do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "/var/www/icons/" + + + Options Indexes MultiViews FollowSymLinks + AllowOverride None + Order allow,deny + Allow from all + + +# +# WebDAV module configuration section. +# + + # Location of the WebDAV lock database. + DAVLockDB /var/lib/dav/lockdb + + +# +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" + +# +# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: +# Redirect permanent /foo http://www.example.com/bar + +# +# Directives controlling the display of server-generated directory listings. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +# +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) +# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) +# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) +# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) +# Norwegian (no) - Polish (pl) - Portugese (pt) +# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) +# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW) +# +AddLanguage ca .ca +AddLanguage cs .cz .cs +AddLanguage da .dk +AddLanguage de .de +AddLanguage el .el +AddLanguage en .en +AddLanguage eo .eo +AddLanguage es .es +AddLanguage et .et +AddLanguage fr .fr +AddLanguage he .he +AddLanguage hr .hr +AddLanguage it .it +AddLanguage ja .ja +AddLanguage ko .ko +AddLanguage ltz .ltz +AddLanguage nl .nl +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pl .po +AddLanguage pt .pt +AddLanguage pt-BR .pt-br +AddLanguage ru .ru +AddLanguage sv .sv +AddLanguage zh-CN .zh-cn +AddLanguage zh-TW .zh-tw + +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Specify a default charset for all content served; this enables +# interpretation of all content as UTF-8 by default. To use the +# default browser choice (ISO-8859-1), or to allow the META tags +# in HTML content to override this choice, comment out this +# directive: +# +AddDefaultCharset UTF-8 + +# +# AddType allows you to add to or override the MIME configuration +# file mime.types for specific file types. +# +#AddType application/x-tar .tgz + +# +# AddEncoding allows you to have certain browsers uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customization directives above. +# +#AddEncoding x-compress .Z +#AddEncoding x-gzip .gz .tgz + +# If the AddEncoding directives above are commented-out, then you +# probably should define those extensions to indicate media types: +# +AddType application/x-compress .Z +AddType application/x-gzip .gz .tgz + +# +# AddHandler allows you to map certain file extensions to "handlers": +# actions unrelated to filetype. These can be either built into the server +# or added with the Action directive (see below) +# +# To use CGI scripts outside of ScriptAliased directories: +# (You will also need to add "ExecCGI" to the "Options" directive.) +# +#AddHandler cgi-script .cgi + +# +# For files that include their own HTTP headers: +# +#AddHandler send-as-is asis + +# +# For type maps (negotiated resources): +# (This is enabled by default to allow the Apache "It Worked" page +# to be distributed in multiple languages.) +# +AddHandler type-map var + +# +# Filters allow you to process content before it is sent to the client. +# +# To parse .shtml files for server-side includes (SSI): +# (You will also need to add "Includes" to the "Options" directive.) +# +AddType text/html .shtml +AddOutputFilter INCLUDES .shtml + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# Putting this all together, we can internationalize error responses. +# +# We use Alias to redirect any /error/HTTP_.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# /var/www/error/include/ files and +# copying them to /your/include/path/, even on a per-VirtualHost basis. +# + +Alias /error/ "/var/www/error/" + + + + + AllowOverride None + Options IncludesNoExec + AddOutputFilter Includes html + AddHandler type-map var + Order allow,deny + Allow from all + LanguagePriority en es de fr + ForceLanguagePriority Prefer Fallback + + +# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +# ErrorDocument 410 /error/HTTP_GONE.html.var +# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var +# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + + + + +# +# The following directives modify normal HTTP response behavior to +# handle known problems with browser implementations. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# The following directive disables redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with Microsoft WebFolders which does not appropriately handle +# redirects for folders with DAV methods. +# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "MS FrontPage" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully +BrowserMatch "^gnome-vfs/1.0" redirect-carefully +BrowserMatch "^XML Spy" redirect-carefully +BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +# +#ProxyRequests On +# +# +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Enable/disable the handling of HTTP/1.1 "Via:" headers. +# ("Full" adds the server version; "Block" removes all outgoing Via: headers) +# Set to one of: Off | On | Full | Block +# +#ProxyVia On + +# +# To enable a cache of proxied content, uncomment the following lines. +# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details. +# +# +# CacheEnable disk / +# CacheRoot "/var/cache/mod_proxy" +# +# + +# +# End of proxy directives. + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +#NameVirtualHost *:80 +# +# NOTE: NameVirtualHost cannot be used without a port specifier +# (e.g. :80) if mod_ssl is being used, due to the nature of the +# SSL protocol. +# + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for requests without a known +# server name. +# +# +# ServerAdmin webmaster@dummy-host.example.com +# DocumentRoot /www/docs/dummy-host.example.com +# ServerName dummy-host.example.com +# ErrorLog logs/dummy-host.example.com-error_log +# CustomLog logs/dummy-host.example.com-access_log common +# diff --git a/tools/systemvm/debian/config/etc/init.d/cloud b/tools/systemvm/debian/config/etc/init.d/cloud index 952daf79a78..09d189a6a0a 100755 --- a/tools/systemvm/debian/config/etc/init.d/cloud +++ b/tools/systemvm/debian/config/etc/init.d/cloud @@ -1,15 +1,17 @@ -#!/bin/sh -e +#!/bin/bash -e ### BEGIN INIT INFO -# Provides: cloud-passwd-srvr +# Provides: cloud # Required-Start: mountkernfs $local_fs cloud-early-config # Required-Stop: $local_fs # Should-Start: # Should-Stop: -# Default-Start: 2345 -# Default-Stop: 2345 +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 # Short-Description: Start up the cloud.com service ### END INIT INFO +#set -x + if [ -f /mnt/cmdline ] then CMDLINE=$(cat /mnt/cmdline) @@ -34,7 +36,7 @@ then . /etc/init.d/functions fi -if [ -f . /lib/lsb/init-functions ] +if [ -f ./lib/lsb/init-functions ] then . /lib/lsb/init-functions fi @@ -119,7 +121,7 @@ case "$1" in restart) stop start ;; - *) echo $"Usage: $0 {start|stop|status|restart}" + *) echo "Usage: $0 {start|stop|status|restart}" exit 1 ;; esac diff --git a/tools/systemvm/debian/config/etc/init.d/cloud-early-config b/tools/systemvm/debian/config/etc/init.d/cloud-early-config index 569a253a365..df547ffb5c7 100755 --- a/tools/systemvm/debian/config/etc/init.d/cloud-early-config +++ b/tools/systemvm/debian/config/etc/init.d/cloud-early-config @@ -1,4 +1,4 @@ -##!/bin/sh -e +#!/bin/bash -e ### BEGIN INIT INFO # Provides: cloud-early-config # Required-Start: mountkernfs $local_fs @@ -28,7 +28,7 @@ patch() { if [ -e /dev/xvdd ]; then mkdir -p /media/cdrom mount -o ro /dev/xvdd /media/cdrom - tar xzf /media/cdrom/patch.tgz -C / + #tar xzf /media/cdrom/patch.tgz -C / cat /proc/cmdline > /var/cache/cloud/cmdline /opt/cloud/bin/patchsystemvm.sh umount /media/cdrom @@ -55,7 +55,7 @@ setup_interface() { fi fi - if [[ "$ip" != "0.0.0.0" && "$ip" != "" ]] + if [ "$ip" != "0.0.0.0" -a "$ip" != "" ] then echo "iface $intf inet $bootproto" >> /etc/network/interfaces echo " address $ip " >> /etc/network/interfaces @@ -67,7 +67,8 @@ setup_interface() { } enable_fwding() { - echo $1 > /proc/sys/net/ipv4/ip_forward + echo "enable_fwding = $1" + echo "$1" > /proc/sys/net/ipv4/ip_forward } enable_svc() { @@ -75,15 +76,15 @@ enable_svc() { local enabled=$2 local cfg=/etc/default/${svc} - sed -i 's/ENABLED=.*$/ENABLED=$enabled/g' $cfg + sed -i "s/ENABLED=.*$/ENABLED=$enabled/" $cfg } disable_hvc() { - [ ! -f /proc/xen ] && sed -i 's/^vc/#vc/' /etc/inittab && telinit q + [ ! -d /proc/xen ] && sed -i 's/^vc/#vc/' /etc/inittab && telinit q + [ -d /proc/xen ] && sed -i 's/^#vc/vc/' /etc/inittab && telinit q } setup_common() { - disable_hvc init_interfaces $1 $2 $3 setup_interface "0" $ETH0_IP $ETH0_MASK $GW setup_interface "1" $ETH1_IP $ETH1_MASK $GW @@ -105,7 +106,7 @@ setup_common() { echo "nameserver $NS2" >> /etc/dnsmasq-resolv.conf echo "nameserver $NS2" >> /etc/resolv.conf fi - if [[ -n "$MGMTNET" && -n "$LOCAL_GW" ]] + if [ -n "$MGMTNET" -a -n "$LOCAL_GW" ] then ip route add $MGMTNET via $LOCAL_GW dev eth1 fi @@ -180,7 +181,7 @@ setup_secstorage() { cp /etc/iptables/iptables-secstorage /etc/iptables/rules enable_fwding 0 enable_svc haproxy 0 - enable_fwding 0 + enable_svc dnsmasq 0 } setup_console_proxy() { @@ -193,11 +194,12 @@ setup_console_proxy() { cp /etc/iptables/iptables-consoleproxy /etc/iptables/rules enable_fwding 0 enable_svc haproxy 0 - enable_fwding 0 + enable_svc dnsmasq 0 chkconfig apache2 off } start() { + patch case $TYPE in router) [ "$NAME" == "" ] && NAME=router @@ -216,7 +218,6 @@ start() { setup_console_proxy; ;; esac - patch return 0 } @@ -227,7 +228,6 @@ else CMDLINE=$(cat /proc/cmdline) fi -disable_hvc TYPE="unknown" BOOTPROTO="static" diff --git a/tools/systemvm/debian/config/etc/init.d/postinit b/tools/systemvm/debian/config/etc/init.d/postinit index ae17565c50b..d063f077daf 100755 --- a/tools/systemvm/debian/config/etc/init.d/postinit +++ b/tools/systemvm/debian/config/etc/init.d/postinit @@ -1,7 +1,14 @@ -#! /bin/bash -# chkconfig: 35 11 90 -# description: pre-boot configuration using boot line parameters -# This file exists in /etc/init.d/ +#!/bin/bash -e +### BEGIN INIT INFO +# Provides: postinit +# Required-Start: mountkernfs $local_fs cloud-early-config +# Required-Stop: $local_fs +# Should-Start: +# Should-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: post-init +### END INIT INFO replace_in_file() { local filename=$1 @@ -26,6 +33,27 @@ setup_console_proxy() { echo "$public_ip $NAME" >> /etc/hosts } +start() { + case $TYPE in + secstorage) + [ "$NAME" == "" ] && NAME=secstorage + setup_secstorage; + ;; + consoleproxy) + [ "$NAME" == "" ] && NAME=consoleproxy + setup_console_proxy; + ;; + esac +} + +stop() { + +} + +status() { + +} + CMDLINE=$(cat /proc/cmdline) TYPE="router" BOOTPROTO="static" @@ -98,13 +126,18 @@ fi ETH1_IP=$(ifconfig eth1|grep 'inet addr:'|cut -d : -f 2|cut -d \ -f 1) ETH2_IP=$(ifconfig eth2|grep 'inet addr:'|cut -d : -f 2|cut -d \ -f 1) -case $TYPE in - secstorage) - [ "$NAME" == "" ] && NAME=secstorage - setup_secstorage; - ;; - consoleproxy) - [ "$NAME" == "" ] && NAME=consoleproxy - setup_console_proxy; - ;; + +case "$1" in + start) start + ;; + stop) stop + ;; + status) status + ;; + restart) stop + start + ;; + *) echo "Usage: $0 {start|stop|status|restart}" + exit 1 + ;; esac diff --git a/tools/systemvm/debian/config/etc/ssh/sshd_config b/tools/systemvm/debian/config/etc/ssh/sshd_config new file mode 100644 index 00000000000..2bcd6e5e580 --- /dev/null +++ b/tools/systemvm/debian/config/etc/ssh/sshd_config @@ -0,0 +1,128 @@ +# $OpenBSD: sshd_config,v 1.75 2007/03/19 01:01:29 djm Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +Port 3922 +#AddressFamily any +#ListenAddress 0.0.0.0 +#ListenAddress :: + +# Disable legacy (protocol version 1) support in the server for new +# installations. In future the default will change to require explicit +# activation of protocol 1 +Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 768 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +SyslogFacility AUTHPRIV +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin yes +#StrictModes yes +#MaxAuthTries 6 + +#RSAAuthentication yes +#PubkeyAuthentication yes +#AuthorizedKeysFile .ssh/authorized_keys + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +#RhostsRSAAuthentication no +# similar for protocol version 2 +#HostbasedAuthentication no +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no +# Don't read the user's ~/.rhosts and ~/.shosts files +#IgnoreRhosts yes + +# To disable tunneled clear text passwords, change to no here! +#PasswordAuthentication yes +#PermitEmptyPasswords no +PasswordAuthentication no + +# Change to no to disable s/key passwords +#ChallengeResponseAuthentication yes +ChallengeResponseAuthentication no + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +GSSAPIAuthentication no +#GSSAPICleanupCredentials yes +GSSAPICleanupCredentials yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +#UsePAM no +UsePAM yes + +# Accept locale-related environment variables +AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES +AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT +AcceptEnv LC_IDENTIFICATION LC_ALL +#AllowTcpForwarding yes +#GatewayPorts no +#X11Forwarding no +#X11Forwarding yes +#X11DisplayOffset 10 +#X11UseLocalhost yes +#PrintMotd yes +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#ShowPatchLevel no +UseDNS no +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no + +# no default banner path +#Banner /some/path + +# override default of no subsystems +Subsystem sftp /usr/libexec/openssh/sftp-server + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server diff --git a/tools/systemvm/debian/config/etc/sysctl.conf b/tools/systemvm/debian/config/etc/sysctl.conf index ba5cbe6137d..d5fe5d43e8e 100644 --- a/tools/systemvm/debian/config/etc/sysctl.conf +++ b/tools/systemvm/debian/config/etc/sysctl.conf @@ -30,4 +30,4 @@ kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 -net.netfilter.nf_conntrack_max=65536 +net.ipv4.netfilter.ip_conntrack_max=65536 diff --git a/tools/systemvm/debian/config/opt/cloud/bin/patchsystemvm.sh b/tools/systemvm/debian/config/opt/cloud/bin/patchsystemvm.sh index f9476724a61..93f8d54465e 100755 --- a/tools/systemvm/debian/config/opt/cloud/bin/patchsystemvm.sh +++ b/tools/systemvm/debian/config/opt/cloud/bin/patchsystemvm.sh @@ -18,39 +18,35 @@ patch_console_proxy() { consoleproxy_svcs() { chkconfig cloud on chkconfig postinit on - chkconfig domr_webserver off + chkconfig cloud-passwd-srvr off chkconfig haproxy off ; chkconfig dnsmasq off - chkconfig sshd on - chkconfig httpd off - chkconfig nfs off - chkconfig nfslock off - chkconfig rpcbind off - chkconfig rpcidmap off + chkconfig ssh on + chkconfig apache2 off + chkconfig nfs-common off + chkconfig portmap off mkdir -p /var/log/cloud } secstorage_svcs() { chkconfig cloud on chkconfig postinit on - chkconfig domr_webserver off + chkconfig cloud-passwd-srvr off chkconfig haproxy off ; chkconfig dnsmasq off - chkconfig sshd on - chkconfig httpd off + chkconfig ssh on + chkconfig apache2 off mkdir -p /var/log/cloud } routing_svcs() { chkconfig cloud off - chkconfig domr_webserver on ; + chkconfig cloud-passwd-srvr on ; chkconfig haproxy on ; chkconfig dnsmasq on - chkconfig sshd on - chkconfig nfs off - chkconfig nfslock off - chkconfig rpcbind off - chkconfig rpcidmap off + chkconfig ssh on + chkconfig nfs-common off + chkconfig portmap off } CMDLINE=$(cat /var/cache/cloud/cmdline) diff --git a/tools/systemvm/debian/config/var/www/html/latest/.htaccess b/tools/systemvm/debian/config/var/www/html/latest/.htaccess new file mode 100644 index 00000000000..038a4c933cf --- /dev/null +++ b/tools/systemvm/debian/config/var/www/html/latest/.htaccess @@ -0,0 +1,5 @@ +Options +FollowSymLinks +RewriteEngine On +#RewriteBase / + +RewriteRule ^user-data$ ../userdata/%{REMOTE_ADDR}/user-data [L,NC,QSA] diff --git a/tools/systemvm/debian/config/var/www/html/userdata/.htaccess b/tools/systemvm/debian/config/var/www/html/userdata/.htaccess new file mode 100644 index 00000000000..5a928f6da25 --- /dev/null +++ b/tools/systemvm/debian/config/var/www/html/userdata/.htaccess @@ -0,0 +1 @@ +Options -Indexes