Since the CloudStack virtual router was redesigned on version 4.6 it has been observed that the DHCP leases file is not persistent across network operations. This causes conflicts on guest VMs static IPs, causing these static IPs to not be renewed by the DHCP server running on isolated and VPC networks' virtual routers (dnsmasq). On stopping or destroying a VM, its dhcp/dns records are not removed from the virtual router causing ghost effects.
Fixes#3272Fixes#3354
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Keep connection alive when on maintenance
* Refactor cancel maintenance and unit tests
* Add marvin tests
* Refactor
* Changing the way we get ssh credentials
* Add check on SSH restart and improve marvin tests
A corner case was found on 4.11.2 for #2493 leading to an infinite loop in state PrepareForMaintenance
To prevent such cases, in which failed migrations are detected but still running on the host, this feature adds a new cluster setting host.maintenance.retries which is the number of retries before marking the host as ErrorInMaintenance if migration errors persist.
How Has This Been Tested?
- 2 KVM hosts, pick one which has running VMs as H
- Block migrations ports on H to simulate failures on migrations:
iptables -I OUTPUT -j REJECT -m state --state NEW -m tcp -p tcp --dport 49152:49215 -m comment --comment 'test block migrations' iptables -I OUTPUT -j REJECT -m state --state NEW -m tcp -p tcp --dport 16509 -m comment --comment 'test block migrations
- Put host H in Maintenance
- Observe that host is indefinitely in PrepareForMaintenance state (after this fix it goes into ErrorInMaintenance after retrying host.maintenance.retries times)
After upgrade existing environments to 4.11, ConfigDrive cannot be enabled for existing zones due to missing entry on 'physical_network_service_providers' table.
* Create unit test cases for 'ConfigDriveBuilder' class
* add method 'getProgramToGenerateIso' as suggested by rohit and Daan
* fix encoding for base64 to StandardCharsets.US_ASCII
* fix MockServerTest.testIsMockServerCanUpgradeConnectionToSsl()
This is another method that is causing Jenkins to fail for almost a month
This introduces a new global setting `vm.configdrive.primarypool.enabled` to toggle creation/hosting of config drive iso files on primary storage, the default will be false causing them to be hosted on secondary storage. The current support is limited from hypervisor resource side and in current implementation limited to `KVM` only. The next big change is that config drive is created at a temporary location by management server and shipped to either KVM or SSVM agent via cmd-answer pattern, the data of which is not logged in logs. This saves us from adding genisoimage dependency on cloudstack-agent pkg.
The APIs to reset ssh public key, password and user-data (via update VM API) requires that VM should be shutdown. Therefore, in the refactoring I removed the case of updation of existing ISO. If there are objections I'll re-put the strategy to detach+attach new config iso as a way of updation. In the refactored implementation, the folder name is changed to lower-cased configdrive. And during VM start, migration or shutdown/removal if primary storage is enable for use, the KVM agent will handle cleanup tasks otherwise SSVM agent will handle them.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Primary Storage count for an account does not decrease when a Data Disk is deleted
When a data disk is created and not attached in a running VM, the "deleteVolume" will not decrement the count for used primary storage in the VMs accounting information. The property that is not being decremented is called "primarystoragetotal"; this information can be retrieved via "listAccounts" API method.
Steps to reproduce this issue:
1 - Create an account, deploy a VM in it
2 - Check the primary storage count for the account with listAccounts API
3 - Create a data disk
4 - Check the primary storage count for the account with listAccounts API
5 - Delete the Data disk
6 - Check the primary storage count for the account with listAccounts API - It is the same as before deleting the data disk (it should not be the same as the value in step 2!)
* formatting and cleanups
* fix imports that were wrongly changed during rebase
This fixes config drive to use VM's user provided host-name instead of
the internal VM instance ID for hostname related config in both
cloudstack and openstack metadata bundled in the ISO.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a rolling restart of VRs when networks are restarted
with cleanup option for isolated and VPC networks. A make redundant option is
shown for isolated networks now in UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10147 Disabled Xenserver Cluster can still deploy VM's. Added code to skip disabled clusters when selecting a host (#2442)
(cherry picked from commit c3488a51db)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10318: Bug on sorting ACL rules list in chrome (#2478)
(cherry picked from commit 4412563f19)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10284:Creating a snapshot from VM Snapshot generates error if hypervisor is not KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10221: Allow IPv6 when creating a Basic Network (#2397)
Since CloudStack 4.10 Basic Networking supports IPv6 and thus
should be allowed to be specified when creating a network.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit 9733a10ecd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10214: Unable to remove local primary storage (#2390)
Allow admins to remove primary storage pool.
Cherry-picked from eba2e1d8a1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dateutil: constistency of tzdate input and output (#2392)
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
Signed-off-by: Daan Hoogland <daan.hoogland@shapeblue.com>
(cherry picked from commit 2ad5202823)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10054:Volume download times out in 3600 seconds (#2244)
(cherry picked from commit bb607d07a9)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* When creating a new account (via domain admin) it is possible to select “root admin” as the role for the new user (#2606)
* create account with domain admin showing 'root admin' role
Domain admins should not be able to assign the role of root admin to new users. Therefore, the role ‘root admin’ (or any other of the same type) should not be visible to domain admins.
* License and formatting
* Break long sentence into multiple lines
* Fix wording of method 'getCurrentAccount'
* fix typo in variable name
* [CLOUDSTACK-10259] Missing float part of secondary storage data in listAccounts
* [CLOUDSTACK-9338] ACS not accounting resources of VMs with custom service offering
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
* [CLOUDSTACK-10230] User should not be able to use removed “Guest OS type” (#2404)
* [CLOUDSTACK-10230] User is able to change to “Guest OS type” that has been removed
Users are able to change the OS type of VMs to “Guest OS type” that has been removed. This becomes a security issue when we try to force users to use HVM VMs (Meltdown/Spectre thing). A removed “guest os type” should not be usable by any users in the cloud.
* Remove trailing lines that are breaking build due to checkstyle compliance
* Remove unused imports
* fix classes that were in the wrong folder structure
* Updates to capacity management
* CLOUDSTACK-10289: Config Drive Metadata: Use VM UUID instead of VM id
* CLOUDSTACK-10288: Config Drive Userdata: support for binary userdata
* CLOUDSTACK-10358: SSH keys are missing on Config Drive disk in some cases
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This can otherwise cause problems in Basic Networking where multiple
IPv4 ranges are configured in a POD.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
While creating the response object for the 'listDomain' API, several database calls are triggered to fetch details like parent domain, project limit, IP limit, etc. These database calls are triggered for each record found in the main fetch query, which is causing the response to slow down.
Fix:
The database transactions are reduced to improve response of the Listdomain API
This extends work presented on #2048 on which the ability to extend the management range is provided.
Aim
This PR allows separating the management network subnet on which SSVM and CPVM are from the virtual routers management subnet.
Detailed use case
PCI compliance requires that network elements are defined as ‘in scope’ or ‘out of scope’, for compliance purposes. The SSVM and CPVM are both in scope as they allow public HTTP or HTTPS connections. The virtual routers have been defined as out of scope as they have been placed entirely in a firewalled network's segment. However, all of the system VM types share management network. As SSVM and CPVM are both in scope this would bring the virtual routers into scope as well, requiring individual audits of every virtual router. As this is not practical, the ‘management network’ which the SSVM and CPVM are on, and the management network which the virtual routers are on, must be separated by a firewall.
Description
By this feature it is possible to dedicate a created range for SSVM and CPVM (system vms) and provide a VLAN ID for its range.
A new boolean global configuration is added: system.vm.management.ip.reservation.mode.strictness. If enabled, the use of System VMs management IP reservation is strict, preferred if not. Default value is false (preferred).
Strict reservation: System VMs should try to get a private IP from a range marked for system vms. If not available, deployment fails
Preferred reservation: System VMS will try to get a private IP from a range marked for system vms. If not available, IP for range not marked for system vms is taken.
The db queries in listTemplateAPI could be optimized to get unique results from the database which could help in reducing the listTemplate API response time.
Snapshot on primary storage not cleaned up after Storage migration. This happens in the following scenario:
Steps To Reproduce
Create an instance on the local storage on any host
Create a scheduled snapshot of the volume:
Wait until ACS created the snapshot. ACS is creating a snapshot on local storage and is transferring this snapshot to secondary storage. But the latest snapshot on local storage will stay there. This is as expected.
Migrate the instance to another XenServer host with ACS UI and Storage Live Migration
The Snapshot on the old host on local storage will not be cleaned up and is staying on local storage. So local storage will fill up with unneeded snapshots.
Using cloudmonkey, when invoking the update template api call, it does not display the isdynamicallyscalable field as part of its template response.
fix done:
org.apache.cloudstack.api.response.TemplateResponse isdynamicallyscalable field is now populated in the server/src/com/cloud/api/query/dao/TemplateJoinDaoImpl.java.newUpdateResponse method.
Unit test:
the Unit test server/test/com/cloud/api/query/dao/TemplateJoinDaoImplTest.java testNewUpdateResponse() verifies that the TemplateResponse is populated correctly.
Marvin test:
the Marvin nosetest integration/smoke/test_templates.py test_02_edit_template(self) confirms that the template_response.isdynamicallyscalable field gets populated with the correct user data.
Test scenario:
Using cloudmonkey, when invoking the 'update template' API call, it should now display the isdynamicallyscalable field as part of its template response.
Consider this scenario:
1. User launches a VM from Template and keep it running
2. Admin logins and deleted that template [CloudPlatform does not check existing / running VM etc. while the deletion is done]
3. User resets the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
It throws error as
java.lang.RuntimeException: Job failed due to exception Resource [Host:11] is unreachable: Host 11: Unable to start instance due to can't find ready template: 209 for data center 1
at com.cloud.vm.VmWorkJobDispatcher.runJob(VmWorkJobDispatcher.java:113)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl$5.runInContext(AsyncJobManagerImpl.java:495)
Client is requesting better handing of this scenario. We need to check existing / running VM's when the template is deleted and warn admin about the possible issue that may occur.
REPRO STEPS
==================
1. Launches a VM from Template and keep it running
2. Now delete that template
3. Reset the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
EXPECTED BEHAVIOR
==================
Cloud platform should throw some warning message while the template is deleted if that template is being used by existing / running VM's
ACTUAL BEHAVIOR
==================
Cloud platform does not throw as waring etc.
* Cleanup and Improve NetUtils
This class had many unused methods, inconsistent names and redundant code.
This commit cleans up code, renames a few methods and constants.
The global/account setting 'api.allowed.source.cidr.list' is set
to 0.0.0.0/0,::/0 by default preserve the current behavior and thus
allow API calls for accounts from all IPv4 and IPv6 subnets.
Users can set it to a comma-separated list of IPv4/IPv6 subnets to
restrict API calls for Admin accounts to certain parts of their network(s).
This is to improve Security. Should an attacker steal the Access/Secret key
of an account he/she still needs to be in a subnet from where accounts are
allowed to perform API calls.
This is a good security measure for APIs which are connected to the public internet.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Add resource type name in request and response for listResources API call.
This adds in the response a new attribute typename with the String value for the corresponding resource enum.
{
"capacitytotal": 0,
"capacityused": 0,
"percentused": "0",
"type": 19,
"typename": "gpu",
"zoneid": "381d0a95-ed4a-4ad9-b41c-b97073c1a433",
"zonename": "ch-dk-2"
}
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
Python base64 requires that the string is a multiple of 4 characters but
the Apache codec does not. RFC states is not mandatory so the data should
not fail the VR script (vmdata.py).
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
At present, The management IP range can only be expanded under the same subnet. According to existing range, either the last IP can be forward extended or the first IP can be backward extended. But we cannot add an entirely different range from the same subnet. So the expansion of range is subnet bound, which is fixed. But when the range gets exhausted and a user wants to deploy more system VMs, then the operation would fail. The purpose of this feature is to expand the range of management network IPs within the existing subnet. It can also delete and list the IP ranges.
Please refer the FS here: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Expansion+of+Management+IP+Range
- Migrate to embedded Jetty server.
- Improve ServerDaemon implementation.
- Introduce a new server.properties file for easier configuration.
- Have a single /etc/default/cloudstack-management to configure env.
- Reduce shaded jar file, removing unnecessary dependencies.
- Upgrade to Spring 5.x, upgrade several jar dependencies.
- Does not shade and include mysql-connector, used from classpath instead.
- Upgrade and use bountcastle as a separate un-shaded jar dependency.
- Remove tomcat related configuration and files.
- Have both embedded UI assets in uber jar and separate webapp directory.
- Refactor systemd and init scripts, cleanup packaging.
- Made cloudstack-setup-databases faster, using `urandom`.
- Remove unmaintained distro packagings.
- Moves creation and usage of server keystore in CA manager, this
deprecates the need to create/store cloud.jks in conf folder and
the db.cloud.keyStorePassphrase in db.properties file. This also
remove the need of the --keystore-passphrase in the
cloudstack-setup-encryption script.
- GZip contents dynamically in embedded Jetty
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Allow security policies to apply on port groups:
- Accepts security policies while creating network offering
- Deployed network will have security policies from the network offering
applied on the port group (in vmware environment)
- Global settings as fallback when security policies are not defined for a network
offering
- Default promiscuous mode security policy set to REJECT as it's the default
for standard/default vswitch
Portgroup vlan-trunking options for dvswitch: This allows admins to define
a network with comma separated vlan id and vlan
range such as vlan://200-400,21,30-50 and use the provided vlan range to
configure vlan-trunking for a portgroup in dvswitch based environment.
VLAN overlap checks are performed for:
- isolated network against existing shared and isolated networks
- dedicated vlan ranges for the physical/public network for the zone
- shared network against existing isolated network
Allow shared networks to bypass vlan overlap checks: This allows admins
to create shared networks with a `bypassvlanoverlapcheck` API flag
which when set to 'true' will create a shared network without
performing vlan overlap checks against isolated network and against
the vlans allocated to the datacenter's physical network (vlan ranges).
Notes:
- No vlan-range overlap checks are performed when creating shared networks
- Multiple vlan id/ranges should include the vlan:// scheme prefix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This causes VM deployment failure on the host that was disabled while adding the storage repository.
In the attachCluster function of the PrimaryDataStoreLifeCycle, we were only selecting hosts that are up and are in enabled state. Here if we select all up hosts, it will populate the DB properly and will fix this issue. Also added a unit test for attachCluster function.
Added ability to specify mac in deployVirtualMachine and
addNicToVirtualMachine api endpoints.
Validates mac address to be in the form of:
aa:bb:cc:dd:ee:ff , aa-bb-cc-dd-ee-ff , or aa.bb.cc.dd.ee.ff.
Ensures that mac address is a Unicast mac.
Ensures that the mac address is not already allocated for the
specified network.
This introduces a new certificate authority framework that allows
pluggable CA provider implementations to handle certificate operations
around issuance, revocation and propagation. The framework injects
itself to `NioServer` to handle agent connections securely. The
framework adds assumptions in `NioClient` that a keystore if available
with known name `cloud.jks` will be used for SSL negotiations and
handshake.
This includes a default 'root' CA provider plugin which creates its own
self-signed root certificate authority on first run and uses it for
issuance and provisioning of certificate to CloudStack agents such as
the KVM, CPVM and SSVM agents and also for the management server for
peer clustering.
Additional changes and notes:
- Comma separate list of management server IPs can be set to the 'host'
global setting. Newly provisioned agents (KVM/CPVM/SSVM etc) will get
radomized comma separated list to which they will attempt connection
or reconnection in provided order. This removes need of a TCP LB on
port 8250 (default) of the management server(s).
- All fresh deployment will enforce two-way SSL authentication where
connecting agents will be required to present certificates issued
by the 'root' CA plugin.
- Existing environment on upgrade will continue to use one-way SSL
authentication and connecting agents will not be required to present
certificates.
- A script `keystore-setup` is responsible for initial keystore setup
and CSR generation on the agent/hosts.
- A script `keystore-cert-import` is responsible for import provided
certificate payload to the java keystore file.
- Agent security (keystore, certificates etc) are setup initially using
SSH, and later provisioning is handled via an existing agent connection
using command-answers. The supported clients and agents are limited to
CPVM, SSVM, and KVM agents, and clustered management server (peering).
- Certificate revocation does not revoke an existing agent-mgmt server
connection, however rejects a revoked certificate used during SSL
handshake.
- Older `cloudstackmanagement.keystore` is deprecated and will no longer
be used by mgmt server(s) for SSL negotiations and handshake. New
keystores will be named `cloud.jks`, any additional SSL certificates
should not be imported in it for use with tomcat etc. The `cloud.jks`
keystore is stricly used for agent-server communications.
- Management server keystore are validated and renewed on start up only,
the validity of them are same as the CA certificates.
New APIs:
- listCaProviders: lists all available CA provider plugins
- listCaCertificate: lists the CA certificate(s)
- issueCertificate: issues X509 client certificate with/without a CSR
- provisionCertificate: provisions certificate to a host
- revokeCertificate: revokes a client certificate using its serial
Global settings for the CA framework:
- ca.framework.provider.plugin: The configured CA provider plugin
- ca.framework.cert.keysize: The key size for certificate generation
- ca.framework.cert.signature.algorithm: The certificate signature algorithm
- ca.framework.cert.validity.period: Certificate validity in days
- ca.framework.cert.automatic.renewal: Certificate auto-renewal setting
- ca.framework.background.task.delay: CA background task delay/interval
- ca.framework.cert.expiry.alert.period: Days to check and alert expiring certificates
Global settings for the default 'root' CA provider:
- ca.plugin.root.private.key: (hidden/encrypted) CA private key
- ca.plugin.root.public.key: (hidden/encrypted) CA public key
- ca.plugin.root.ca.certificate: (hidden/encrypted) CA certificate
- ca.plugin.root.issuer.dn: The CA issue distinguished name
- ca.plugin.root.auth.strictness: Are clients required to present certificates
- ca.plugin.root.allow.expired.cert: Are clients with expired certificates allowed
UI changes:
- Button to download/save the CA certificates.
Misc changes:
- Upgrades bountycastle version and uses newer classes
- Refactors SAMLUtil to use new CertUtils
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Nicolas Vazquez
Rafael Weingärtner
Gabriel Beims Bräscher
Rohit Yadav
Frank Maximus
Mike Tutkowski
Abhinandan Prateek
Wido den Hollander
dahn
PranaliM
subhash yedugundla
ernjvr
Mowgli
Marc-Aurèle Brothier
Sigert Goeminne
Sigert Goeminne
Bitworks Software, Ltd
Nitin Kumar Maharana
Rohit Yadav
Frank Maximus
Rohit Yadav
Harika Punna
SudharmaJain
Nathan Johnson