- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#1366
Enables forkmode for surefire plugin and increases memory opts for JVM
for rate-limit tests. This tries to fix intermittent Jenkins failures
which look like:
multipleClientsCanAccessWithoutBlocking(org.apache.cloudstack.ratelimit.ApiRateLimitTest):
unable to create new native thread
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
commit #7
So far only 1 controller (scsi or ide) is supported in Cloudstack for ide or
scsi, this is existing limitation. Added support for 2nd IDE controller. Support adding IDE
virtual disk to VM. Also added check if VM is running as IDE virtual disk cannot be attached
to VM if VM is runnning.If user detaches a virtual disk on lower unit number of controller,
then subsequent attach operation should find free unit number on the controller and attach
the virtual disk there.
commit #6
Let the controllers of existing VMs continue without flip, current busInfo retrieved from
chain_info field of volume record from database would be preferred over
controller settings from all configuration settings.
commit #5
Editing global configuration param vmware.root.disk.controller osdefault value results
in loss of previous root disk controller type. Hence root disk's controller type for legacy
VMs is unknow post that modificaiton by user. If VM is stop/start then we could get this
infromation from bus info of existing volume. But if user resets VM and then try to start VM.
The existing bus info would be lost. Hence existing disk info is not available to depend on.
Using lsilogic or generic scsi controller for ROOT disk of legacy VMs if reset.
commit #4
Avoid adding additional (>1) scsi controllers to system vms. While attaching volume to legacy VM
don't use osdefault optoin which applicable only for VM created with the option enabled, use
legacy data disk controller type (lsilogic)
commit #3
If root disk's controller type is scsi and data disk controller type condenses
to any of scsi sub-types then data disk controller type would fall back to root disk controller itself. This
ensures data volumes would be accessible in all cases as controller of root volume would be reliable
and it means VM has the supported controller. It also avoids mix of scsi controller sub-types in a user instance.
Also translating disk controller type scsi to lsilogic.
commit #2
Support auto detection of recommended virtual disk controller type for specific guest OS.
commit #1
Support granual controller types. Add support for controller types in template registration as well.
Fix white spaces.
Removed stale HEAD merge lines
Removed tail of merge lines
Fixed VmwareResource, removing storage commands that moved to VmwareStorageProcessor.
removed stale code of controller that is present in processor
Fixed check style errors.
Fixed injection.
Tested with Linux and windows templates. Unable to run iso based tests due to few bugs in register iso area.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
(cherry picked from commit a4cc987a6f)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Adds disk serial ids based on volume uuids to the virt xml. This may be useful
for appliances/software that needs some serial ids on the VM disks. This does not
impact existing/running VMs, the vm virt xmls will be updates for running VMs
the next time they are stopped/started.
For testing, disk serial (of debian based systemvm) in the virt xml matched that
in /sys/devices/pci0000:00:0000:00:07.0/virtio4/block/vda/serial.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8762: Check to confirm disk activity before starting a VMImplements a VM volume/disk file activity checker that checks if QCOW2 file
has been changed before starting the VM. This is useful as a pessimistic
approach to save VMs that were running on faulty hosts that CloudStack could
try to launch on other hosts while the host was not cleanly fenced. This is
optional and available only if you enable the settings in agent.properties
file, on per-host basis.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* pr/754:
CLOUDSTACK-8762: Confirm disk activity before starting a VM
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Implements a VM volume/disk file activity checker that checks if QCOW2 file
has been changed before starting the VM. This is useful as a pessimistic
approach to save VMs that were running on faulty hosts that CloudStack could
try to launch on other hosts while the host was not cleanly fenced. This is
optional and available only if you enable the settings in agent.properties
file, on per-host basis.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Adds unit test for ListAndSwitchSAMLAccountCmd
- Checks and logs in user only if they are enabled
- If saml user switches to a locked account, send appropriate error message
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
SAML authorized accounts might be across various domains, this allows for
switching of accounts only in case of SAML authenticated user accounts across
other accounts with the same SAML uid/username.
Moves the previous switch account logic to its own ui-custom module
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When dumping XML use appropriate flags:
1, VIR_DOMAIN_XML_SECURE (dump security sensitive information too)
8, VIR_DOMAIN_XML_MIGRATABLE (dump XML suitable for migration)
Source:
https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainXMLFlags
This fixes CVE 2015-3252: VNC password lost during VM migration across KVM
hosts. The issue is also seen when a VM is rebooted.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Add option to authorize SAML SSO for user when adding user. Appends a domain to
user/account name if global setting is enabled, useful in case of multiple IDP
server. By default the setting is set to false (keep as it is).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#575
- Login is based on sessionkey HttpOnly Cookie
- ApiServlet does login verification using sessionKey from both the request cookies
and the API parameters. In both cases, if either or both are passed they should
match the sessionKey stored in the current session of the HttpRequest
- UI: it no longer needs to read or set sessionkey cookie
- UI: it no longer needs to return g_sessionKey value in the API requests, though
to support a sso mechanism g_sessionKey is still passed in the API is not null
- Secure jsessionid cookie is set to be HttpOnly and Secure
- SAML login should also set HttpOnly cookie before redirecting to UI
- SAML: listIdps & getSPMetadata APIs are readonly now, won't log out a logged in user
Performed tests (login, saml login if applicable, page refreshes, opening
multiple tabs, logout) with following combinations:
- SAML disabled, normal auth as admin, domain-admin and user
- SAML enabled, normal auth as admin, domain-admin and user; and saml sso as
admin, domain-admin and user
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#574
This closes#308
* Move config options to SAML plugin
This moves all configuration options from Config.java to SAML auth manager. This
allows us to use the config framework.
* Make SAML2UserAuthenticator validate SAML token in httprequest
* Make logout API use ConfigKeys defined in saml auth manager
* Before doing SAML auth, cleanup local states and cookies
* Fix configurations in 4.5.1 to 4.5.2 upgrade path
* Fail if idp has no sso URL defined
* Add a default set of SAML SP cert for testing purposes
Now to enable and use saml, one needs to do a deploydb-saml after doing a deploydb
* UI remembers login selections, IDP server
- CLOUDSTACK-8458:
* On UI show dropdown list of discovered IdPs
* Support SAML Federation, where there may be more than one IdP
- New datastructure to hold metadata of SP or IdP
- Recursive processing of IdP metadata
- Fix login/logout APIs to get new interface and metadata data structure
- Add org/contact information to metadata
- Add new API: listIdps that returns list of all discovered IdPs
- Refactor and cleanup code and tests
- CLOUDSTACK-8459:
* Add HTTP-POST binding to SP metadata
* Authn requests must use either HTTP POST/Artifact binding
- CLOUDSTACK-8461:
* Use unspecified x509 cert as a fallback encryption/signing key
In case a IDP's metadata does not clearly say if their certificates need to be
used as signing or encryption and we don't find that, fallback to use the
unspecified key itself.
- CLOUDSTACK-8462:
* SAML Auth plugin should not do authorization
This removes logic to create user if they don't exist. This strictly now
assumes that users have been already created/imported/authorized by admins.
As per SAML v2.0 spec section 4.1.2, the SP provider should create authn requests using
either HTTP POST or HTTP Artifact binding to transfer the message through a
user agent (browser in our case). The use of HTTP Redirect was one of the reasons
why this plugin failed to work for some IdP servers that enforce this.
* Add new User Source
By reusing the source field, we can find if a user has been SAML enabled or not.
The limitation is that, once say a user is imported by LDAP and then SAML
enabled - they won't be able to use LDAP for authentication
* UI should allow users to pass in domain they want to log into, though it is
optional and needed only when a user has accounts across domains with same
username and authorized IDP server
* SAML users need to be authorized before they can authenticate
- New column entity to track saml entity id for a user
- Reusing source column to check if user is saml enabled or not
- Add new source types, saml2 and saml2disabled
- New table saml_token to solve the issue of multiple users across domains and
to enforce security by tracking authn token and checking the samlresponse for
the tokens
- Implement API: authorizeSamlSso to enable/disable saml authentication for a
user
- Stubs to implement saml token flushing/expiry
- CLOUDSTACK-8463:
* Use username attribute specified in global setting
Use username attribute defined by admin from a global setting
In case of encrypted assertion/attributes:
- Decrypt them
- Check signature if provided to check authenticity of message using IdP's
public key and SP's private key
- Loop through attributes to find the username
- CLOUDSTACK-8538:
* Add new global config for SAML request sig algorithm
- CLOUDSTACK-8539:
* Add metadata refresh timer task and token expiring
- Fix domain path and save it to saml_tokens
- Expire hour old saml tokens
- Refresh metadata based on timer task
- Fix unit tests
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#489
This way we update the DB with the actual size of the disk after deployment from template
(cherry picked from commit 4b4c52ea77)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/storage/LibvirtStorageAdaptor.java
KVM hosts which are actuall up, but if their agents are shutdown should be put
in disconnected state. This would avoid getting the VMs HA'd and other commands
such as deploying a VM will exclude that host and save us from errors.
The improvement is that, we first try to contact the KVM host itself. If it fails
we assume that it's disconnected, and then ask its KVM neighbours if they can
check its status. If all of the KVM neighbours tell us that it's Down and we're
unable to reach the KVM host, then the host is possibly down. In case any of the
KVM neighbours tell us that it's Up but we're unable to reach the KVM host then
we can be sure that the agent is offline but the host is running.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#340
Pull average Cpu util report between polling intervals instead of since boot
instead of using values since uptime
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#289
Passing the file argument to the xml break for EL 7.1, the fix removes
the argument as just passing rombar='off' with its file arg to be empty string.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#290
We add a new contract to pass Http request to authentication plugin system. In
the default login API, we disallow non-POST requests.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
EL7 has a different output to 'free', use /proc/meminfo instead of a tool to be
more consistent across distros
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
From b3f18e7d74, the zone level systemvm local
storage setting never worked as it needed to be moved to config depot.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Linux kernel supports vmxnet3, allowing it in KVM plugin would allow us to
run ESX hosts on KVM hosts using CloudStack with vmxnet3 nic which can be
passed as VM's nicAdapter detail
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This improvements checks for "guest.cpu.features" property which is a space
separated list of cpu features that is specific for a host. When added, it
will add <feature policy='require' name='{{feature-you-listed}}'/> in the
<cpu> section of the generated vm spec xml.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Dont evict template when a delete command has been sent to VMware resource for deletion of volume.
(cherry picked from commit f45e6b94ed)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The only artifact resolved from libvirt.org was org.libvirt:libvirt:0.5.1
this artifact is now available from maven's default central repository
This closes#180
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 9cf31b0714)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
MigrateVMWithVolumes-
1. If ESXi host version is below 5.1, ensure destination datastore(s) is mounted on the source host, then migrate the storage and then finally migrate the VM.
If destination storage(s) is not mounted on the source host,
- In case of NFS storage mount the storage(s).
- In case of VMFS storage fail the request for migration.
2. If EXi host version is 5.1 or above, simultaneously migrate the VM and its storage to the destination host and storage(s) respectively for both NFS and VMFS storage.
(cherry picked from commit adc836cc5e)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Correctly register node info for a newly created VMware context.
(cherry picked from commit 13bdc1cef4)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Rohit Yadav
Sateesh Chodapuneedi
Wido den Hollander
Mike Tutkowski
Kishan Kavala
Daan Hoogland
Laszlo Hornyak
Daan Hoogland
Likitha Shetty
Santhosh Edukulla
