Issue
=====
While listing datacenters associated with a zone, only zone Id validation is required.
There is no need to have additional checks like zone is a legacy zone or not.
Fix
===
Removed unnecessary checks over zone ID and just checking if zone with specified ID exists or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
(cherry picked from commit 0ef1c17541)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Test scenarios:
- Enable cluster HA after VR is created. Now stop and start VR and check its restart priority, should be High.
- Enable cluster HA before VR is created. Now create some VM and verify that VR created must have High restart priority.
Issue
====
Exception occured while creating the CPVM in the VmWare Setup using standard vswitches.
StartCommand failed due to Exception: com.vmware.vim25.AlreadyExists
message: [] com.vmware.vim25.AlreadyExistsFaultMsg: The specified key, name, or identifier already exists
Fix
===
Ensure synchronization while attempting to create port group such that simultaneous attempts are not made with same port group name on same ESXi host.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
- Refactor and move VirtualMachineDiskInfo to cloud-utils
- Allows mixing of scsi controller types
- Fixes a NPE case with map passed as null, for example in case of detach volume
command
- Use a osdefault translator that allow use of recent os types added (enums of
which) are not available in the sdk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMfor xenserver,kvm and for vmware.
* pr/780:
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Kishan Kavala <kishan@apache.org>
CLOUDSTACK-9252: Support configurable NFS version for Secondary Storage mountsJIRA Ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9252
### Description of the problem
After starting secondary storage VM, secondary storage tries to be mounted but fails with error: <code>Protocol family not supported</code>
It was found out that adding <code>-o vers=X</code> to mount command it would work, where <code>X</code> is the desired NFS version to use.
If it is desired to mount a store with a specific NFS version, it has passed in <code>image_store_details</code> table for a store with id <code>Y</code> as a property:
| store_id| name| value |
|:-------------:|:-------------:|:-------------:|
|Y|nfs.version|X (e.g. 3)|
Where X stands for NFS version
* pr/1361:
CLOUDSTACK-9252: Last refactor, passing nfs version to ssvm
CLOUDSTACK-9252: Add missing licence header
CLOUDSTACK-9252: Little refactor
CLOUDSTACK-9252: Mock application context for unit test
CLOUDSTACK-9252: Add unit tests
CLOUDSTACK-9252: New refactor
CLOUDSTACK-9252: Remove static dependencies, refactor
CLOUDSTACK-9252: Remove duplicates getNfsVersion, refactor
CLOUDSTACK-9252: Support configurable nfs version
CLOUDSTACK-9252: Add nfs version to commands
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
CLOUDSTACK-9211: Support passing vRAM size to support 3D GPU on VmwareJIRA TICKET:
https://issues.apache.org/jira/browse/CLOUDSTACK-9211
CS support passing hypervisor options by creating entries in <code>vm_template_details</code> or <code>user_vm_details</code>
To enable software 3D GPU 4 options needs to be added:
| name| value |
|:-------------:|:-------------:|
|mks.enable3d|true|
|mks.use3dRenderer|automatic|
|svga.autodetect|false|
|svga.vramSize|(size in KB) e.g. 131072|
Currently all options except <code>svga.vramSize</code> works, VMs always get configured with default 64Mb videoRAM instead of the one provided on the option.
* pr/1310:
CLOUDSTACK-9211: Unit test for 3dgpu support
CLOUDSTACK-9211: Refactor vm vram size setter method
CLOUDSTACK-9211: Add javadoc and refactor method
CLOUDSTACK-9211: Support passing vRAM size to support 3D GPU on Vmware
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Rohit Yadav
Sateesh Chodapuneedi
Rene Moser
nvazquez
Suresh Kumar Anaparti
Suresh Kumar Anaparti
John Burwell
Abhinandan Prateek
Murali Reddy
Will Stevens
Mike Tutkowski
Maneesha.P
Kishan Kavala
gabrascher
Rafael Weingärtner