* kvm: Use 'ip' instead of 'brctl'
The command 'brctl' is deprecated and should no longer be used.
iproute2 supports all the features we need and therefor we should use
this instead of the old commands.
Feature wise this does not change anything. It just makes the code more
robust towards the future.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* kvm/modifyvlan: Use 'ip' instead of 'brctl'
brctl is deprecated and by using iproute2 we are future-proof
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Fix regression bug that affects KVM local storage migration. Some of the desired execution flows for KVM local storage migration had been altered to allow only managed storage to execute. Fixed allowing managed and non managed storages to execute.
Fixes#3521
There are certain scenarios where the 169.254.0.0/16 subnet is used for different
purposes then CloudStack on a hypervisor.
Once of such scenarios is a BGP+EVPN+VXLAN setup using BGP Unnumbered where the
169.254.0.1 address is used by Frr/Zebra BGP routing to send traffic to the
neighboring router.
The following settings can be changed in the agent.properties (default values added):
control.cidr=169.254.0.0/16
Make sure the global setting 'control.cidr' matches the values defined in the agent.propeties!
In the future the mgmt server can send this parameter to a KVM Agent on startup, but at the moment
this framework is not in place and thus these values can't be send to the Agent in a proper manner.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently when refreshing disk usage stats all kvm agents are asked to collect stats for all volumes. In setups with multiple kvm hosts where managed storage is used, not all volumes are attached to all kvm hosts, this results in a large number of warnings in the kvm agent logs. This change introduces a filter step in case managed storage is used so that the management server only requests kvm agents for stats about volumes that are connected to each kvm host.
Add CephSnapshotStrategy to handle RBD revert (rollback) snapshot. In order to support RBD revert (rbd_rollback), this PR adds a CephSnapshotStrategy class to handle Ceph/RBD snapshot actions.
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
This change addresses #3089. There was an issue when disks were being added with bus type IDE when creating windows VMs from ISOs. It is not possible to select bus type when creating a VM with an ISO. The bus type is inferred based on the platform emulator string provided to the KVM agent. Currently when creating a VM with managed storage (ex: Solidfire) and OS type string Windows*, all disks are added as IDE. Qemu currently does not support multiple IDE controllers and this configuration results in VMs that cannot be started. This issue does not occur when using NFS as the storage provider due to logic in that KVM agent that makes all data volumes (non root) use a virtio controller for file based disk. Similar logic was added for raw physical disks so that managed storage has the same behavior as NFS. In addition specific versions were removed from the code that guesses the disk controller to be used based on the platform emulator string since most modern operating systems support virtio.
Fixes#3089
Feature Specification: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=95653548
Live storage migration on KVM under these conditions:
From source and destination hosts within the same cluster
From NFS primary storage to NFS cluster-wide primary storage
Source NFS and destination NFS storage mounted on hosts
In order to enable this functionality, database should be updated in order to enable live storage capacibilty for KVM, if previous conditions are met. This is due to existing conflicts between qemu and libvirt versions. This has been tested on CentOS 6 hosts.
Additional notes:
To use this feature set the storage_motion_supported=1 in the hypervisor_capability table for KVM. This is done by default as the feature may not work in some environments, read below.
This feature of online storage+VM migration for KVM will only work with CentOS6 and possible Ubuntu as KVM hosts but not with CentOS7 due to:
https://bugs.centos.org/view.php?id=14026https://bugzilla.redhat.com/show_bug.cgi?id=1219541
On CentOS7 the error we see is: " error: unable to execute QEMU command 'migrate': this feature or command is not currently supported" (reference https://ask.openstack.org/en/question/94186/live-migration-unable-to-execute-qemu-command-migrate/). Reading through various lists looks like the migrate feature with qemu may be available with paid versions of RHEL-EV but not centos7 however this works with CentOS6.
Fix for CentOS 7:
Create repo file on /etc/yum.repos.d/:
[qemu-kvm-rhev]
name=oVirt rebuilds of qemu-kvm-rhev
baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7Server/
mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el7Server
enabled=1
skip_if_unavailable=1
gpgcheck=0
yum install qemu-kvm-common-ev-2.3.0-29.1.el7.x86_64 qemu-kvm-ev-2.3.0-29.1.el7.x86_64 qemu-img-ev-2.3.0-29.1.el7.x86_64
Reboot host
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
To make sure that a qemu2-image won't be corrupted by the snapshot deletion procedure which is being performed after copying the snapshot to a secondary store, I'd propose to put a VM in to suspended state.
Additional reference: https://bugzilla.redhat.com/show_bug.cgi?id=920020#c5Fixes#3193
* Improvements on upload direct download certificates
* Move upload direct download certificate logic to KVM plugin
* Extend unit test certificate expiration days
* Add marvin tests and command to revoke certificates
* Review comments
* Do not include revoke certificates API
* DPDK vHost User mode selection
* SQL text field and DPDK classes refactor
* Fix NullPointerException after refactor
* Fix unit test
* Refactor details type
When I use SandyBridge as custom cpu in my testing, vm failed to start due to following error:
```
org.libvirt.LibvirtException: unsupported configuration: guest and host CPU are not compatible: Host CPU does not provide required features: avx, xsave, aes, tsc-deadline, x2apic, pclmuldq
```
With this patch, it works with the following setting in agent.properties:
```
guest.cpu.mode=custom
guest.cpu.model=SandyBridge
guest.cpu.features=-avx -xsave -aes -tsc-deadline -x2apic -pclmuldq
```
vm cpu is defined as below:
```
<cpu mode='custom' match='exact'>
<model fallback='allow'>SandyBridge</model>
<feature policy='disable' name='avx'/>
<feature policy='disable' name='xsave'/>
<feature policy='disable' name='aes'/>
<feature policy='disable' name='tsc-deadline'/>
<feature policy='disable' name='x2apic'/>
<feature policy='disable' name='pclmuldq'/>
</cpu>
```
On first startup, the management server creates and saves a random
ssh keypair using ssh-keygen in the database. The command does
not specify keys in PEM format which is not the default as generated
by latest ssh-keygen tool.
The systemvmtemplate always needs re-building whenever there is a change
in the cloud-early-config file. This also tries to fix that by introducing a
stage 2 bootstrap.sh where the changes specific to hypervisor detection
etc are refactored/moved. The initial cloud-early-config only patches
before the other scripts are called.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes PR #3146 db cleanup to the correct 4.12->4.13 upgrade path
- Fixes failing unit test due to jdk specific changes after forward
merging
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new patching script for patching systemvms on KVM
using qemu-guest-agent that runs inside the systemvm on startup. This
also removes the vport device which was previously used by the legacy
patching script and instead uses the modern and new uniform guest
agent vport for host-guest communication.
Also updates the sytemvmtemplate build config to use the latest Debian
9.9.0 iso.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* ubuntu16: fix unable to add host if cloudbrX is not configured
while add a ubuntu16.04 host with native eth0 (cloudbrX is not configured),
the operation failed and I got the following error in /var/log/cloudstack/agent/setup.log
```
DEBUG:root:execute:ifconfig eth0
DEBUG:root:[Errno 2] No such file or directory
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 38, in configration
result = self.config()
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 211, in config
super(networkConfigUbuntu, self).cfgNetwork()
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 108, in cfgNetwork
device = self.netcfg.getDefaultNetwork()
File "/usr/lib/python2.7/dist-packages/cloudutils/networkConfig.py", line 53, in getDefaultNetwork
pdi = networkConfig.getDevInfo(dev)
File "/usr/lib/python2.7/dist-packages/cloudutils/networkConfig.py", line 157, in getDevInfo
elif networkConfig.isBridge(dev) or networkConfig.isOvsBridge(dev):
```
The issue is caused by commit 9c7cd8c248
2017-09-19 16:45 Sigert Goeminne ● CLOUDSTACK-10081: CloudUtils getDevInfo function will now return "bridge" instead o
* ubuntu16: Stop service libvirt-bin.socket while add a host
service libvirt-bin.socket will be started when add a ubuntu 16.04 host
DEBUG:root:execute:sudo /usr/sbin/service libvirt-bin start
However, libvirt-bin service will be broken by it after restarting
Stopping service libvirt-bin.socket will fix the issue.
An example is given as below.
```
root@node32:~# /etc/init.d/libvirt-bin restart
[ ok ] Restarting libvirt-bin (via systemctl): libvirt-bin.service.
root@node32:~# virsh list
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory
root@node32:~# systemctl stop libvirt-bin.socket
root@node32:~# /etc/init.d/libvirt-bin restart
[ ok ] Restarting libvirt-bin (via systemctl): libvirt-bin.service.
root@node32:~# virsh list
Id Name State
----------------------------------------------------
```
* ubuntu16: Diable libvirt default network
By default, libvirt will create default network virbr0 on kvm hypervisors.
If vm uses the same ip range 192.168.122.0/24, there will be some issues.
In some cases, if we run tcpdump inside vm, we will see the ip of kvm hypervisor as source ip.
* Mock Scanner, instead of scan the computer running the test.
This allows non linux machines to run the tests without scanning for a
non existing /proc/meminfo.
* test fixes on 'other' platforms libvirt wrapper unit tests (#3)
* Keep iotune section in the VM's XML after live migration
When live migrating a KVM VM among local storages, the VM loses the
<iotune> section on its XML, therefore, having no IO limitations.
This commit removes the piece of code that deletes the <iotune> section
in the XML.
* Add test for replaceStorage in LibvirtMigrateCommandWrapper
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Fix Javadoc for method replaceIpForVNCInDescFile
* feature: add libvirt / qemu io bursting
Adds the ability to set bursting features from libvirt / qemu
This allows you to utilize the iops and bytes temporary "burst" mode
introduced with libvirt 2.4 and improved upon with libvirt 2.6.
https://blogs.igalia.com/berto/2016/05/24/io-bursts-with-qemu-2-6/
* updates per rafael et al
The KVM Agent had two mechanisms for reporting its capabilities
and memory to the Management Server.
On startup it would ask libvirt the amount of Memory the Host has
and subtract and add the reserved and overcommit memory.
When the HostStats were however reported to the Management Server
these two configured values on the Agent were no longer reported
in the statistics thus showing all the available memory in the
Agent/Host to the Management Server.
This commit unifies this by using the same logic on Agent Startup
and during statistics reporting.
memory=3069636608, reservedMemory=1073741824
This was reported by a 4GB Hypervisor with this setting:
host.reserved.mem.mb=1024
The GUI (thus API) would then show:
Memory Total 2.86 GB
This way the Agent properly 'lies' to the Management Server about its
capabilities in terms of Memory.
This is very helpful if you want to overprovision or undercommit machines
for various reasons.
Overcommitting can be done when KSM or ZSwap or a fast SWAP device is
installed in the machine.
Underprovisioning is done when the Host might run other tasks then a KVM
hypervisor, for example when it runs in a hyperconverged setup with Ceph.
In addition internally many values have been changed from a Double to a Long
and also store the amount of bytes instead of Kilobytes.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Replace deprecated optparse by argparse
Starting with Python 2.7 the library optparse has been replaced by
argpase.
This commit replaces the use of optparse by argparse
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Remove LXC support from security_group.py
LXC does not work and has been partially removed from CloudStack already
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Refactor libvirt code
Use a single function which properly throws an Exception when the
connection to libvirt fails.
Also simplify some logic, make it PEP-8 compatible and remove a unused
function from the code.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Raise Exception on execute() failure
If the executed command exists with a non-zero exit status we should
still return the output to the command, but also raise an Exception.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Use a function to determin the physical device of a bridge
We can not safely assume that the first device listed under a bridge is the
physical device.
With VXLAN isolation a vnet device can be attached to a bridge prior to the
vxlanXXXX device being attached.
We need to filter out those devices and then fetch the physical device attached
to the bridge.
In addition use the 'bridge' command instead of 'brctl'. 'bridge' is part of the
iproute2 utils just like 'ip' and should be considered as the new default.
This command is also available on EL6 and does not break any backwards compat.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: --set is deprecated, use --match-set
These messages are seen in the KVM Agent log:
--set option deprecated, please use --match-set
Functionality does not change
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: PEP-8 and indentation fixes
There were a lot of styling problems in the code:
- Missing whitespace or exess whitespace
- CaMelCaSe function names and variables
- 2-space indentation instead of 4 spaces
This commit addresses those issues.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The additional queues can enhance the performance of the VirtIO SCSI disk
and it is recommended to set this to the amount of vCPUs a Instance is assigned.
The optional queues attribute specifies the number of queues for the
controller. For best performance, it's recommended to specify a value matching
the number of vCPUs. Since 1.0.5 (QEMU and KVM only)
Source: https://libvirt.org/formatdomain.html#elementsVirtio
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Allow KVM VM live migration with ROOT volume on file
* Allow KVM VM live migration with ROOT volume on file
- Add JUnit tests
* Address reviewers and change some variable names to ease future
implementation (developers can easily guess the name and use
autocomplete)
Added dummy and lo devices to be treated as a normal bridge slave devs.
Fixes#2998
Added two more device names (lo* and dummy*). Implemented tests. Code was refactored.
Improved paths concatenation code from "+" to Paths.get.
If a host has many routes this can be a magnitude faster then printing
all the routes and grepping for the default.
In some situations the host might have a large amount of routes due to
dynamic routing being used like OSPF or BGP.
In addition fix a couple of loglines which were throwing messages on
DEBUG while WARN and ERROR should be used there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When vxlan://untagged is used for public (or guest) network, use the
default public/guest bridge device same as how vlan://untagged works.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These additional RBD features allow for faster lookups of how much space a RBD
image is using, but with the exclusive locking we prevent two VMs from writing
to the same RBD image at the same time.
These are the default features used by Ceph for any new RBD image.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
On actual testing, I could see that kvmheartbeat.sh script fails on NFS
server failure and stops the agent only. Any HA VMs could be launched
in different hosts, and recovery of NFS server could lead to a state
where a HA enabled VM runs on two hosts and can potentially cause
disk corruptions. In most cases, VM disk corruption will be worse than
VM downtime. I've kept the sleep interval between check/rounds but
reduced it to 10s. The change in behaviour was introduced in #2722.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Prevents errors while migrating VM from ISO:
Test 1: Deploy VM from ISO -> Live migrate VM to another host -> ERROR
Test 2: Register ISO using Direct Download on KVM -> Deploy VM from ISO -> Live migrate VM to another host -> ERROR
- Prevent NullPointerException migrating VM from ISO
- Prevent mount secondary storage on ISO direct downloads on KVM
Since we support only Ubuntu 16.04+ on master/4.12+, we can now use
the libvirt service name `libvirtd` for all distributions. This also
fixes an optional package name for libvirtd installation on Debian 9+.
Fixes#2909
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Windows has support for several paravirt features that it will use when running on Hyper-V, Microsoft's hypervisor. These features are called enlightenments. Many of the features are similar to paravirt functionality that exists with Linux on KVM (virtio, kvmclock, PV EOI, etc.)
Nowadays QEMU/KVM can also enable support for several Hyper-V enlightenments. When enabled, Windows VMs running on KVM will use many of the same paravirt optimizations they would use when running on Hyper-V.
A number of years ago, a PR was introduced that added a good portion of the code to enable this feature set, but it was never completed. This PR enables the existing features. The previous patch set detailed in #1013 also included the tests.
By selecting Windows PV, the enlightenment additions will be applied to the libvirt configuration. This is support on Windows Server 2008 and beyond, so all currently supported versions of Windows Server.
In our testing, we've seen benchmark improvements of around 20-25% running on Centos 7 hosts and it is also supported on Centos/RHEL 6.5 and later. Testing on Ubuntu would be appreciated.
When a Instance is (attempted to be) started in KVM Host the Agent
should not worry about the allocated memory on this host.
To make a proper judgement we need to take more into account:
- Memory Overcommit ratio
- Host reserved memory
- Host overcommit memory
The Management Server has all the information and the DeploymentPlanner
has to make the decision if a Instance should and can be started on a
Host, not the host itself.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This fixes#2763 by moving a post cert-renewal class for kvm
plugin/hypervisor to src/main/java. The regression is due to change
in file-system layout due to maven standard refactoring on master and
issue was not caught during forward-merging of a PR from 4.11 branch.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
This ensure that fewer mount points are made on hosts for either
primary storagepools or secondary storagepools.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Now the KVM agent checks whether a storage pool is mounted or not mounted before calling storagePoolCreateXML().
Signed-off-by: Kai Takahashi <k-takahashi@creationline.com>
This introduces a new global setting `vm.configdrive.primarypool.enabled` to toggle creation/hosting of config drive iso files on primary storage, the default will be false causing them to be hosted on secondary storage. The current support is limited from hypervisor resource side and in current implementation limited to `KVM` only. The next big change is that config drive is created at a temporary location by management server and shipped to either KVM or SSVM agent via cmd-answer pattern, the data of which is not logged in logs. This saves us from adding genisoimage dependency on cloudstack-agent pkg.
The APIs to reset ssh public key, password and user-data (via update VM API) requires that VM should be shutdown. Therefore, in the refactoring I removed the case of updation of existing ISO. If there are objections I'll re-put the strategy to detach+attach new config iso as a way of updation. In the refactored implementation, the folder name is changed to lower-cased configdrive. And during VM start, migration or shutdown/removal if primary storage is enable for use, the KVM agent will handle cleanup tasks otherwise SSVM agent will handle them.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In 4.11.0, I added the ability to online migrate volumes from NFS to managed storage. This actually works for Ceph to managed storage in a private 4.8 branch, as well. I thought I had brought along all of the necessary code from that private 4.8 branch to make Ceph to managed storage functional in 4.11.0, but missed one piece (which is fixed by this PR).
This adds and allows Ubuntu 18.04 to be used as KVM host. In addition,
on the UI when hypervisor version key is missing, this adds and display
the host os and version detail which is useful to show the KVM host
os and version.
When cache mode 'none' is used for empty cdrom drives, systemvms
and guest VMs fail to start on newer libvirtd such as Ubuntu bionic.
The fix is ensure that cachemode is not declared when drives are empty
upon starting of the VM. Similar issue logged at redhat here:
https://bugzilla.redhat.com/show_bug.cgi?id=1342999
The workaround is to ensure that we don't configure cachemode for
cdrom devices at all. This also fixes live VM migration issue.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The three methods are named as "setXXX", actually, they are not simple setter or getter.
They are further renamed as "generateXXX" with dahn's comments.
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
This extends securing of KVM hosts to securing of libvirt on KVM
host as well for TLS enabled live VM migration. To simplify implementation
securing of host implies that both host and libvirtd processes are
secured with management server's CA plugin issued certificates.
Based on whether keystore and certificates files are available at
/etc/cloudstack/agent, the KVM agent determines whether to use TLS or
TCP based uris for live VM migration. It is also enforced that a secured
host will allow live VM migration to/from other secured host, and an
unsecured hosts will allow live VM migration to/from other unsecured
host only.
Post upgrade the KVM agent on startup will expose its security state
(secured detail is sent as true or false) to the managements server that
gets saved in host_details for the host. This host detail can be accesed
via the listHosts response, and in the UI unsecured KVM hosts will show
up with the host state of ‘unsecured’. Further, a button has been added
that allows admins to provision/renew certificates to KVM hosts and can
be used to secure any unsecured KVM host.
The `cloudstack-setup-agent` was modified to accept a new flag `-s`
which will reconfigure libvirtd with following settings:
listen_tcp=0
listen_tls=1
tcp_port="16509"
tls_port="16514"
auth_tcp="none"
auth_tls="none"
key_file = "/etc/pki/libvirt/private/serverkey.pem"
cert_file = "/etc/pki/libvirt/servercert.pem"
ca_file = "/etc/pki/CA/cacert.pem"
For a connected KVM host agent, when the certificate are
renewed/provisioned a background task is scheduled that waits until all
of the agent tasks finish after which libvirt process is restarted and
finally the agent is restarted via AgentShell.
There are no API or DB changes.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Several fixes addressed:
- Dettach ISO fails when trying to detach a direct download ISO
- Fix for metalink support on SSVM agents (this closes CLOUDSTACK-10238)
- Reinstall VM from bypassed registered template (this closes CLOUDSTACK-10250)
- Fix upload certificate error message even though operation was successful
- Fix metalink download, checksum retry logic and metalink SSVM downloader
There is a race condition in the monitoring of the migration process on KVM. If the monitor wakes up in the tight window after the migration succeeds, but before the migration thread terminates, the monitor will get a LibvirtException “Domain not found: no domain with matching uuid” when checking on the migration status. This in turn causes CloudStack to sync the VM state to stop, in which it issues a defensive StopCommand to ensure it is correctly synced.
Fix: Prevent LibvirtException: "Domain not found" caused by the call to dm.getInfo()
This fixes move refactoring error introduced in #2283
For instance, the class DatadiskTO is supposed to be in com.cloud.agent.api.to package. However, the folder structure it was placed in is com.cloud.agent.api.api.to.
Skip tests for cloud-plugin-hypervisor-ovm3:
For some unknown reason, there are quite a lot of broken test cases for cloud-plugin-hypervisor-ovm3. They might have appeared after some dependency upgrade and was overlooked by the person updating them. I checked them to see if they could be fixed, but these tests are not developed in a clear and clean manner. On top of that, we do not see (at least I) people using OVM3-hypervisor with ACS. Therefore, I decided to skip them.
Identention corrected to use spaces instead of tabs in XML files
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
The documentation of Libvirt specifies the requirement of using an XML namespace,
when having metadata in the Domain XML. The Nuage extenstion metadata was not
adhering to this specification, and the lastest Libvirt version ignores it in that case.
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
* Cleanup and Improve NetUtils
This class had many unused methods, inconsistent names and redundant code.
This commit cleans up code, renames a few methods and constants.
The global/account setting 'api.allowed.source.cidr.list' is set
to 0.0.0.0/0,::/0 by default preserve the current behavior and thus
allow API calls for accounts from all IPv4 and IPv6 subnets.
Users can set it to a comma-separated list of IPv4/IPv6 subnets to
restrict API calls for Admin accounts to certain parts of their network(s).
This is to improve Security. Should an attacker steal the Access/Secret key
of an account he/she still needs to be in a subnet from where accounts are
allowed to perform API calls.
This is a good security measure for APIs which are connected to the public internet.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ports PR #1470 by @remibergsma.
Make the generated json files unique to prevent concurrency issues:
The json files now have UUIDs to prevent them from getting overwritten
before they've been executed. Prevents config to be pushed to the wrong
router.
2016-02-25 18:32:23,797 DEBUG [c.c.a.t.Request] (AgentManager-Handler-1:null) (logid:) Seq 2-4684025087442026584: Processing: { Ans: , MgmtId: 90520732674657, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.routing.GroupA
nswer":{"results":["null - success: null","null - success: [INFO] update_config.py :: Processing incoming file => vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b\n[INFO] Processing JSON file vm_dhcp_entry.json.4ea4506
1-2efb-4467-8eaa-db3d77fb0a7b\n"],"result":true,"wait":0}}] }
On the router:
2016-02-25 18:32:23,416 merge.py __moveFile:298 Processed file written to /var/cache/cloud/processed/vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b.gz
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Otherwise we send down a 'null' to a ProcessBuilder in Java instead of a String and this
causes a NPE.
We should check first if the Instance has a IPv6 address before sending it there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-10160: Fix typo in Libvirt XML definition for Virtio-SCSI
The attribute for the XML element 'controller' should be 'model' and
not 'mode'.
Source: https://libvirt.org/formatdomain.html#elementsControllers
A scsi controller has an optional attribute model, which is one of
'auto', 'buslogic', 'ibmvscsi', 'lsilogic', 'lsisas1068', 'lsisas1078',
'virtio-scsi' or 'vmpvscsi'.
In the current state a regular SCSI device is attached and not a Virtio-SCSI
device.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-10160: Add UnitTest for LibvirtVMDef.SCSIDef
To make sure the XML output string is correct
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This commit adds support for passing IPv6 Addresses and/or Subnets as
Secondary IPs.
This is groundwork for CLOUDSTACK-9853 where IPv6 Subnets have to be
allowed in the Security Groups of Instances to we can add DHCPv6
Prefix Delegation.
Use ; instead of : for separating addresses, otherwise it would cause
problems with IPv6 Addresses.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
Commit enables a new feature for KVM hypervisor which purpose is to increase virtually amount of RAM available beyond the actual limit.
There is a new parameter in agent.properties: host.overcommit.mem.mb which enables adding specified amount of RAM to actually available. It is necessary to utilize KSM and ZSwap features which extend RAM with deduplication and compression.
The watchdog timer adds functionality where the Hypervisor can detect if an
instance has crashed or stopped functioning.
The watchdog timer adds functionality where the Hypervisor can detect if an
instance has crashed or stopped functioning.
When the Instance has the 'watchdog' daemon running it will send heartbeats
to the /dev/watchdog device.
If these heartbeats are no longer received by the HV it will reset the Instance.
If the Instance never sends the heartbeats the HV does not take action. It only
takes action if it stops sending heartbeats.
This is supported since Libvirt 0.7.3 and can be defined in the XML format as
described in the docs: https://libvirt.org/formatdomain.html#elementsWatchdog
To the 'devices' section this will be added:
In the agent.properties the action to be taken can be defined:
vm.watchdog.action=reset
The same goes for the model. The Intel i6300esb is however the most commonly used.
vm.watchdog.model=i6300esb
When the Instance has the 'watchdog' daemon running it will send heartbeats
to the /dev/watchdog device.
If these heartbeats are no longer received by the HV it will reset the Instance.
If the Instance never sends the heartbeats the HV does not take action. It only
takes action if it stops sending heartbeats.
This is supported since Libvirt 0.7.3 and can be defined in the XML format as
described in the docs: https://libvirt.org/formatdomain.html#elementsWatchdog
To the 'devices' section this will be added:
<watchdog model='i6300esb' action='reset'/>
In the agent.properties the action to be taken can be defined:
vm.watchdog.action=reset
The same goes for the model. The Intel i6300esb is however the most commonly used.
vm.watchdog.model=i6300esb
Signed-off-by: Wido den Hollander <wido@widodh.nl>
- Removed three bg thread tasks, uses FSM event-trigger based scheduling
- On successful recovery, kicks VM HA
- Improves overall HA scheduling and task submission, lower DB access
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Host-HA offers investigation, fencing and recovery mechanisms for host that for
any reason are malfunctioning. It uses Activity and Health checks to determine
current host state based on which it may degrade a host or try to recover it. On
failing to recover it, it may try to fence the host.
The core feature is implemented in a hypervisor agnostic way, with two separate
implementations of the driver/provider for Simulator and KVM hypervisors. The
framework also allows for implementation of other hypervisor specific provider
implementation in future.
The Host-HA provider implementation for KVM hypervisor uses the out-of-band
management sub-system to issue IPMI calls to reset (recover) or poweroff (fence)
a host.
The Host-HA provider implementation for Simulator provides a means of testing
and validating the core framework implementation.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Since libvirt 1.2.2 libvirt will properly create volumes
using RBD format 2.
We can use libvirt to creates the volumes which strips a bit of
code from the CloudStack Agent's responsbility.
RBD format 2 is already used by all volumes created by CloudStack.
This format is the most recent format of RBD and is still actively
being developed.
This removes the support for Ubuntu 12.04 as that does not have the
proper libvirt version available.
Signed-off-by: Wido den Hollander wido@widodh.nl
We can use libvirt to creates the volumes which strips a bit of
code from the CloudStack Agent's responsbility.
RBD format 2 is already used by all volumes created by CloudStack.
This format is the most recent format of RBD and is still actively
being developed.
This removes the support for Ubuntu 12.04 as that does not have the
proper libvirt version available.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Updated hardcoded value with max data volumes limit from hypervisor capabilities.
(cherry picked from commit 93f5b6e8a3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Libvirt / Qemu (KVM) does not collect statistics about these either.
On some systems it might even yield a 'internal error' from libvirt
when attempting to gather block statistics from such devices.
For example Ubuntu 16.04 (Xenial) has a issue with this.
Skip them when looping through all devices.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Bug-ID: CLOUDSTACK-8880: calculate free memory on host before deploying Vm. free memory = total memory - (all vm memory)With memory over-provisioning set to 1, when mgmt server starts VMs in parallel on one host, then the memory allocated on that kvm can be larger than the actual physcial memory of the kvm host.
Fixed by checking free memory on host before starting Vm.
Added test case to check memory usage on Host.
Verified Vm deploy on Host with enough capacity and also without capacity
* pr/847:
Bug-ID: CLOUDSTACK-8880: calculate free memory on host before deploying Vm. free memory = total memory - (all vm memory)
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9794: Unable to attach more than 14 devices to a VMUpdated hardcoded value with max data volumes limit from hypervisor capabilities.
* pr/1953:
CLOUDSTACK-9794: Unable to attach more than 14 devices to a VM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
* 4.9:
moved logrotate from cron.daily to cron.hourly for vpcrouter in cloud-early-config
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
[4.9] CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agentThe router.aggregation.command.each.timeout in global configuration is only applied on new created KVM host.
For existing KVM host, changing the value will not be effective.
We need to propagate the configuration to existing host when cloudstack-agent is connected.
* pr/1856:
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This adds support for virtio-scsi on KVM hosts, either
for guests that are associated with a new os_type of 'Other PV Virtio-SCSI (64-bit)',
or when a VM or template is regstered with a detail parameter rootDiskController=scsi.
Update cloudstack add template dialog to allow for selecting rootDiskController with KVM
Update cloudstack kvm virtio-scsi to enable discard=unmap
[4.10] CLOUDSTACK-8746: VM Snapshotting implementation for KVM
* pr/977:
Fixes for testing VM Snapshots on KVM. Related to PR 977
CLOUDSTACK-8746: vm snapshot implementation for KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This commit implements basic Security Grouping for KVM in
Basic Networking.
It does not implement full Security Grouping yet, but it does:
- Prevent IP-Address source spoofing
- Allow DHCPv6 clients, but disallow DHCPv6 servers
- Disallow Instances to send out Router Advertisements
The Security Grouping allows ICMPv6 packets as described by RFC4890
as they are essential for IPv6 connectivity.
Following RFC4890 it allows:
- Router Solicitations
- Router Advertisements (incoming only)
- Neighbor Advertisements
- Neighbor Solicitations
- Packet Too Big
- Time Exceeded
- Destination Unreachable
- Parameter Problem
- Echo Request
ICMPv6 is a essential part of IPv6, without it connectivity will break or be very
unreliable.
For now it allows any UDP and TCP packet to be send in to the Instance which
effectively opens up the firewall completely.
Future commits will implement Security Grouping further which allows controlling UDP and TCP
ports for IPv6 like can be done with IPv4.
Regardless of the egress filtering (which can't be done yet) it will always allow outbound DNS
to port 53 over UDP or TCP.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit adds a additional VirtIO channel with the name
'org.qemu.guest_agent.0' to all Instances.
With the Qemu Guest Agent the Hypervisor gains more control over the Instance if
these tools are present inside the Instance, for example:
* Power control
* Flushing filesystems
* Fetching Network information
In the future this should allow safer snapshots on KVM since we can instruct the
Instance to flush the filesystems prior to snapshotting the disk.
More information: http://wiki.qemu.org/Features/QAPI/GuestAgent
Keep in mind that on Ubuntu AppArmor still needs to be disabled since the default
AppArmor profile doesn't allow libvirt to write into /var/lib/libvirt/qemu
This commit does not add any communication methods through API-calls, it merely
adds the channel to the Instances and installs the Guest Agent in the SSVMs.
With the addition of the Qemu Guest Agent channel a second channel appears in /dev
on a SSVM as a VirtIO port.
The order in which the ports are defined in the XML matters for the naming inside
the SSVM VM and by not relying on /dev/vportXX but looking for a static name the
SSVM still boots properly if the order in the XML definition is changed.
A SSVM with both ports attached will have something like this:
root@v-215-VM:~# ls -l /dev/virtio-ports
total 0
lrwxrwxrwx 1 root root 11 May 13 21:41 org.qemu.guest_agent.0 -> ../vport0p2
lrwxrwxrwx 1 root root 11 May 13 21:41 v-215-VM.vport -> ../vport0p1
root@v-215-VM:~# ls -l /dev/vport*
crw------- 1 root root 251, 1 May 13 21:41 /dev/vport0p1
crw------- 1 root root 251, 2 May 13 21:41 /dev/vport0p2
root@v-215-VM:~#
In this case the SSVM port points to /dev/vport0p1, but if the order in the XML
is different it might point to /dev/vport0p2
By looking for a portname with a pre-defined pattern in /dev/virtio-ports we
do not rely on the order in the XML definition.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
By adding a Random Number Generator device to Instances we can prevent
entropy starvation inside guest.
The default source is /dev/random on the host, but this can be configured
to another source when present, for example a hardware RNG.
When enabled it will add the following to the Instance's XML definition:
<rng model='virtio'>
<rate period='1000' bytes='2048' />
<backend model='random'>/dev/random</backend>
</rng>
If the Instance has the proper support, which most modern distributions have,
it will have a /dev/hwrng device which it can use for gathering entropy.
More information: https://libvirt.org/formatdomain.html#elementsRng
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[blocker] CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpmsThe patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
/cc @wido @sverrirab @karuturi @jburwell
@blueorangutan package
* pr/1634:
CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
Expose cmd error in the logs when patch command fails.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We noticed that when an exception occurs within the cleanup loop inside
the deletePhysicalDisk routine that the previously allocated contexts
are not cleaned up. This seemed to cause an eventual crash of the host
agent after multiple exceptions within the loop.
In addition to ensuring the contexts are always freed we also improved
the logging when exceptions do occur to include the actual return code
from the underlying library in deletePhysicalDisk and deleteSnapshot.
Convert patchviasocket to python (removes perl dependency for KVM agent)As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Note: perl-modules requirement is missing (fixed in mentioned PR) so do not merge that onto master.
* pr/1533:
Revert "Add perl-modules as install dependency for cloudstack-agent"
patchviasocket improve error handling
Convert patchviasocket to python (removes perl dependency for KVM agent)
Signed-off-by: Will Stevens <williamstevens@gmail.com>
As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CPU socket count reporting correctionCPU socket count reporting correction
From https://github.com/MissionCriticalCloud/cosmic-plugin-hypervisor-kvm/pull/16
* pr/1520:
Remove empty spaces causing the build to fail
CPU socket count reporting correction
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage- KVM-HA- Fix CheckOnHost for Local storage
- Also skip HA on VMs that are using local storage
* pr/1496:
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage - Also skip HA on VMs that are using local storage
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8302: Removing snapshots on RBDSnapshot removing implemented if primary datastore is RBD
https://issues.apache.org/jira/browse/CLOUDSTACK-8302
* pr/1230:
CLOUDSTACK-8302 - Cleanup snapshot on KVM with RBD Snapshot removing implemented on RBD. 1. On management side: when created new shanpshot we checking if our primary storage is RBD, then do not remove record from cloud.snapshot_store_ref with link to Ceph image via 'install_path' field. 2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'. 3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It was worked around some possible runtime exceptions introduced by the
changes that were added by the PR 780. Basically, the points in which a
null pointer exception could happen, we added safety checks to avoid
them. It was create a specific method do that, all together test cases
were created for this newly method that was added.
CLOUDSTACK-9142 Migrate VM changes xmlDesc in a safe wayThe problem arises when the origin hypervisor has an ip addres that ends with 1, like '10.10.10.1' and the qemu VM description is containing an address that has that as part of its address, '10.10.10.100' for instance.
now migrating to '10.10.10.10' will change both addresses in the xml description file for qemu. It is fixed and unit tests are added. I am not sure yet how to integration test this. Regression will probably work so creating a PR now.
* pr/1348:
CLOUDSTACK-9142 Migrate VM changes xmlDesc in a safe way
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Snapshot removing implemented on RBD.
1. On management side: when created new shanpshot we checking if our primary storage is RBD,
then do not remove record from cloud.snapshot_store_ref with link to Ceph
image via 'install_path' field.
2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'.
3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
SecurityGroupRulesCmd code cleanupWrote a test and cleaned some duplicate code with the objective to evaluate the jenkins pull request process at builds.a.o
worthwhile to keep, IMHO.
* pr/1287:
SecurityGroupRulesCmd code cleanup review comments handled
deal with PMD warnings
code cleanup
security rules test
remove autogenerated pydev files
Signed-off-by: Koushik Das <koushik@apache.org>
test: Fix Libvirt test so that it works on WindowsThis test failed on Windows, using the File.separator it should run fine on Windows.
* pr/1242:
test: Fix Libvirt test so that it works on Windows
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9047 rename enumsmake enums adhere to best practice naming conventions
* pr/1049:
CLOUDSTACK-9046 rename enums to adhere to naming conventions
CLOUDSTACK-9046 renamed enums in kvm plugin
CLOUDSTACK-9047 use 'State's only with context there are more types called 'State' (or to be called so but now 'state') So remove imports and prepend their enclosing class/context to them.
Signed-off-by: Daan Hoogland <daan@onecht.net>
Add function to set vapic, spinlock and retries
Add function to get retry value
Modify toString to output appropriate XML for spinlock value if set
CLOUDSTACK-9004: Add features to HyperVEnlightenmentFeatureDef
Refactored set methods to get rid of code duplication.
Modified unit tests accordingly
* 4.6:
Use version for RC branch name instead of branch
make sure all files are updates with new version
Update L10N resource files with 4.6 strings from Transifex (20151129)
Fix secondary storage not working with swift
CLOUDSTACK-9083: Add disk serial to kvm virt xml
Adds disk serial ids based on volume uuids to the virt xml. This may be useful
for appliances/software that needs some serial ids on the VM disks. This does not
impact existing/running VMs, the vm virt xmls will be updates for running VMs
the next time they are stopped/started.
For testing, disk serial (of debian based systemvm) in the virt xml matched that
in /sys/devices/pci0000:00:0000:00:07.0/virtio4/block/vda/serial.
We currently don't support scsi-blcok devices for which serial is not supported,
for this we've added a DeviceType (LUN) which may be used in future and a check
to not add the serial to the xml if disk type is LUN.
Refer: https://libvirt.org/formatdomain.html#elementsDisks
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9062: Improve S3 implementation.The S3 implementation is far from finished, this commit focuses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimizations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Please review thoroughly, both code inspection and (automated) integration tests. Currently no integration tests are available specifically for S3. Therefore the implementation is needed to be tested manually, for now...
What I tested:
- Greenfield install -> will download latest systemvm template automatically to S3.
- Upload a template/iso
- Download a template/iso
- Restart of management server -> list available templates -> doesn't download them again if available.
* pr/1083:
CLOUDSTACK-9062: Improve S3 implementation.
Signed-off-by: Remi Bergsma <github@remi.nl>
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Add Unit Tests for Libvirt/KVM storage codeThese classes were not covered by Unit Tests and this commit
adds some tests for their basic functionality.
* pr/986:
Add Unit Tests for Libvirt/KVM storage code
Signed-off-by: Remi Bergsma <github@remi.nl>
These were lacking, but this helper is used in various places
inside the KVM code.
Some simple tests to verify the helper is doing what we expect it
to do.
Use host.reserved.ram.mb agent property to modify total system RAM
before reporting to management server.
Remove dom0ram variable and its min/max calculation. Just reserve a
default of 1GB, unless overridden by host.reserved.mem.mb property.
CLOUDSTACK-8762: Check to confirm disk activity before starting a VMImplements a VM volume/disk file activity checker that checks if QCOW2 file
has been changed before starting the VM. This is useful as a pessimistic
approach to save VMs that were running on faulty hosts that CloudStack could
try to launch on other hosts while the host was not cleanly fenced. This is
optional and available only if you enable the settings in agent.properties
file, on per-host basis.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* pr/753:
CLOUDSTACK-8762: Check to confirm disk activity before starting a VM
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Guys, can you review it? things need to be discussed:
(1) this supports KVM/QCOW2 only. Anyone want to implement for other Hypervisor/format ?
(2) The original data volume (on primary storage) will be removed.
(3) The script uses the default timeout in libvirtComputingResource. Do we need to add one in global configuration (like copy.volume.wait or backup.snapshot.wait, create.volume.from.snapshot.wait)
(4) In scripts/storage/qcow2/managesnapshot.sh, I use "qemu-img convert -f qcow2 -O qcow2" to copy the snapshot from secondary to primary (hence there is no base image file), instead of "cp -f", this is because convert is faster than cp in my testing.
* pr/732:
CLOUDSTACK-5863: revert volume snapshot for KVM/QCOW2
Signed-off-by: Wei Zhou <w.zhou@tech.leaseweb.com>
This reverts commit cd7218e241, reversing
changes made to f5a7395cc2.
Reason for Revert:
noredist build failed with the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.2:compile (default-compile) on project cloud-plugin-hypervisor-vmware: Compilation failure
[ERROR] /home/jenkins/acs/workspace/build-master-noredist/plugins/hypervisors/vmware/src/com/cloud/hypervisor/guru/VMwareGuru.java:[484,12] error: non-static variable logger cannot be referenced from a static context
[ERROR] -> [Help 1]
even the normal build is broken as reported by @koushik-das on dev list
http://markmail.org/message/nngimssuzkj5gpbz
Implements a VM volume/disk file activity checker that checks if QCOW2 file
has been changed before starting the VM. This is useful as a pessimistic
approach to save VMs that were running on faulty hosts that CloudStack could
try to launch on other hosts while the host was not cleanly fenced. This is
optional and available only if you enable the settings in agent.properties
file, on per-host basis.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
messages: Removed unused agent command AttachVolumeCommand and corresponding answer AttachVolumeAnswer
These types are not used anywhere in the orchestration layer.
Signed-off-by: Koushik Das <koushik@apache.org>
Default to notify only script to handle non-CLVM/QCOW cases.This relates to [CLOUDSTACK-8732](https://issues.apache.org/jira/browse/CLOUDSTACK-8732)
Before this commit the call to `getResizeScriptType` would throw an exception (earlier versions returned `null`, which was fine) - this caused the RBD case to fail. By changing the default to notify only we fix the case for any non-CLVM and non-QCOW cases, too.
This is RBD for now, but this should extend to new storage types supported by Libvirt natively in future.
This is my first attempted contribution: I can see a case for adding RBD logic to the actual getResizeScriptType call, too, but I felt that putting it `LibvirtResizeVolumeCommandWrapper.java` kept the special-casing of RBD (and comments about that) in one place.
### Caveat:
With Libvirt 1.2.2 this actually doesn't do the right thing - but it does do what the documentation *says* should be the right thing, so I'm going to test if this is a Libvirt bug which is fixed in a later version.
(To make it work I need to execute something like:
virsh blockresize --path vda --size 100G i-7-44-VM
where vda is the path as far as the *guest* is concerned, and not an `rbd/` path - which *should* work, but doesn't.)
* pr/696:
Default to notify only script to handle non-CLVM/QCOW cases.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This setting works on CentOS 6 / RHEL 6 but does nothing, as
"cpu" cgroup is not mounted. On CentOS 7 / RHEL 7 systemd does
mount cgroups and "cpu" is co-mounted with "cpuacc". Hence, if
we specify "cpu" then this results in an error because it can
only use them both, or none.
By removing the setting, we rely on the default of qemu, which
is:
cgroup_controllers = ["cpu", "devices", "memory", "blkio", "cpuacct", "net_cls"]
Only if they are really mounted, they will be used. So, this will
work on both version 6 and 7.
The 'fix script' didn't work well, as after a reboot you'd still have qemu
throwing errors. Now we can handle the co-mountedcgroups.
This tries to avoid cleaning by a device name.
This closes#718
(cherry picked from commit 74f697a2dd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Before this commit the call to `getResizeScriptType` would throw
an exception (earlier versions returned `null`, which was fine) -
this caused the RBD case to fail. By changing the default to
notify only we fix the case for any non-CLVM and non-QCOW cases.
This is RBD for now, but this should extend to new storage
types suppored by Libvirt natively in future.
When dumping XML use appropriate flags:
1, VIR_DOMAIN_XML_SECURE (dump security sensitive information too)
8, VIR_DOMAIN_XML_MIGRATABLE (dump XML suitable for migration)
Source:
https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainXMLFlags
This fixes CVE 2015-3252: VNC password lost during VM migration across KVM
hosts. The issue is also seen when a VM is rebooted.
(cherry picked from commit cb2aca7516)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On NFS we write a heartbeat, but without those we can not safely
fence off a host.
If we fence without knowing about a heartbeat we can cause a split-brain situation.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
- Make sure the new password replaces the old one in the queue
- Updated the patch files for XenServer
- Updated the script path on LibvirtComputing class
- Adding update_host_passwd to VRScripts
- Add implementation to CitrixUpdateHostPasswordCommandWrapper
- Improve testUpdateHostPasswordCommand() unit test on CitrixRequestWrapperTest
- Adding update_host_passwd.sh script
- Adding the host IP address as an instance variable on UpdateHostPasswordCommand
- Improving the Unit Test (LibvirtComputingResourceTest) to get it covering the new code
- Make sure doUpdateHostPassword() doesn't get called if flag is set to false
- Do not update XenServer hosts if the cluster ID is not informed
This closes#559
- Adding more unit tests as suggested by Daan and Rajani.
- Mocking SshHelper and the Script classes, used by Citrix and Libvirt resources respectively.
- Changed location of the update_host_passwd script
- Updated the patch files for XenServer
- Updated the script path on LibvirtComputing class
- Removed the hostIP from the LibvirtUpdateHostPasswordCommandWrapper execute() method
- Adding update_host_passwd to VRScripts
- Add accessor method to host password on CitrixResourceBase
- Add implementation to CitrixUpdateHostPasswordCommandWrapper
- Improve testUpdateHostPasswordCommand() unit test on CitrixRequestWrapperTest
- Add line to patch files on xenserver directory
Concerning the LibVirt change:
- I forgot to assing the return of the getDefaultHypervisorScriptsDir() method to the hypervisorScriptsDir variable
- Modifying the LibvirtUpdateHostPasswordCommandWrapper in order to execute the script on the host
- Adding the script path to LibvirtComputingResource
- Adding the host IP address as an instance variable on UpdateHostPasswordCommand
- Improving the Unit Test (LibvirtComputingResourceTest) to get it covering the new code
- Make sure the doUpdateHostPassword() method returns the result from the answer, not always true
- Added the LibvirtUpdateHostPasswordCommandWrapper class, which will handle the changes in the KVM agent
That's will be further implemented in the future. The command will avoid the agent to complain about Unsupported command
- Added a test to make sure the current implementation of the comment works
- If changes in the future, it will also require changes. In that way, we make sure nobody will break it
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#527
KVM hosts which are actuall up, but if their agents are shutdown should be put
in disconnected state. This would avoid getting the VMs HA'd and other commands
such as deploying a VM will exclude that host and save us from errors.
The improvement is that, we first try to contact the KVM host itself. If it fails
we assume that it's disconnected, and then ask its KVM neighbours if they can
check its status. If all of the KVM neighbours tell us that it's Down and we're
unable to reach the KVM host, then the host is possibly down. In case any of the
KVM neighbours tell us that it's Up but we're unable to reach the KVM host then
we can be sure that the agent is offline but the host is running.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#340
When executing the tests in an environment where Libvirt is also installed, it
caused errors.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#342
Pull average Cpu util report between polling intervals instead of since boot
instead of using values since uptime
(cherry picked from commit 04176eaf17)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/LibvirtComputingResource.java
This closes#297
Passing the file argument to the xml break for EL 7.1, the fix removes
the argument as just passing rombar='off' with its file arg to be empty string.
This closes#290
(cherry picked from commit aafa0c80b3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
EL7 has a different output to 'free', use /proc/meminfo instead of a tool to be
more consistent across distros
(cherry picked from commit 212a05a345)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/LibvirtComputingResource.java
Removing real IPs from the tests because they cause a long running time for LibvirtComputingResourceTest
- In a local machine it takes 1.977s, but in a KVM test environment it's taking 257.879 sec
Fixing typo on LibvirtRequestWrapper
- Replace linbvirtCommands by libvirtCommands on LibvirtRequestWrapper
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#255
- The test was okay, but when running in an environment where a /root/.ssh/id_rsa existed, it would return true then fail
- We now mock the calls to methods that return the key paths, instead of relying in the static variables
- Adding LibvirtNetworkElementCommandWrapper and LibvirtStorageSubSystemCommandWrapper
- 2 unit tests added
- KVM hypervisor plugin with 22.2% coverage
I also refactored the StorageSubSystemCommand interface into an abstract class
- Remove the pseudo-multiple-inheritance implementation
- The StorageSubSystemCommand was an interface, not related to the Command class
and its implementation were extending the Command class anyway. The whole structure is better now.
- Addin LibvirtPvlanSetupCommandWrapper
- 6 unit tests added
- KVM hypervisor plugin with 21% coverage
From the 6 tests added, 2 were extra tests to increase the coverage of the LibvirtStopCommandWrapper
- Increased from 35% to 78.7%
- Adding LibvirtCopyVolumeCommandWrapper
Refactoring the LibvirtUtilitiesHelper
- Changing method name
Did not add any test to this commit due to the refactor mentioned abot.
Will proceed and add the tests
i# Please enter the commit message for your changes. Lines starting
- Gave it a better, more suggestive, name since I now added other methods to the class.
- It makes easier to mock objects and get a better coverage of the classes
- Adding LibvirtBackupSnapshotCommandWrapper, LibvirtCreatePrivateTemplateFromVolumeCommandWrapper and LibvirtManageSnapshotCommandWrapper
- 3 unit tests added
- KVM hypervisor plugin with 18.3% coverage
Less tests added to those classes because the code is quite complex and way too long.
The tests added are just covering the new flow, to make sure it works fine. I will come back to those classes later.
- Adding LibvirtOvsDestroyBridgeCommandWrapper, LibvirtOvsSetupBridgeCommandWrapper
- 4 unit tests added
- KVM hypervisor plugin with 13.9% coverage
More tests added to cover LibvirtPrepareForMigrationCommandWrapper
- Coverage of this wrapper broght from 37% to 90.6%
- 4 new tests added
- Adding LibvirtCheckConsoleProxyLoadCommandWrapper, LibvirtConsoleProxyLoadCommandWrapper, LibvirtWatchConsoleProxyLoadCommandWrapperand CitrixConsoleProxyLoadCommandWrapper
- 2 unit tests added
- KVM hypervisor plugin with 12% coverage
Refactored the CommandWrapper interface in order to remove the esecuteProxyLoadScan, which is now
implemented bu subclasses.
- Adding LibvirtGetHosStatsCommandWrapper
- 1 unit test added
- KVM hypervisor with 10.5% coverage
Tests are a bit limited on this one becuause of the current implementation. Would clean it up later in a separate branch
- Adding LibvirtGetVmStatsCommandWrapper
- 3 unit tests
Refactored the LibvirtConnectiobn by surrounding it with an wrapper.
- Make it easier to cover the static/native calls
- Added better coverage to StopCommand tests
- Adding LibvirtStopCommandWrapper
- LibvirtRequestWrapper
- 1 unit tests
Refactored the RequestWrapper to make it better.
- Changes also applied to the CitrixRequestWrapper
Linux kernel supports vmxnet3, allowing it in KVM plugin would allow us to
run ESX hosts on KVM hosts using CloudStack with vmxnet3 nic which can be
passed as VM's nicAdapter detail
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit e02d787f30)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This improvements checks for "guest.cpu.features" property which is a space
separated list of cpu features that is specific for a host. When added, it
will add <feature policy='require' name='{{feature-you-listed}}'/> in the
<cpu> section of the generated vm spec xml.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit ea7fd37783)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The only artifact resolved from libvirt.org was org.libvirt:libvirt:0.5.1
this artifact is now available from maven's default central repository
This closes#180
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
As suggested by Wido on the dev ML changing the repo to eu.ceph.com to avoid
build failures. Will revert if ceph.com is up again.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit c9fd57fff3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CentOS 7 does not ship with ifconfig anymore. We should use ip commands instead.
This also works on older versions, like CentOS 6 and Ubuntu 12.x/14.x, that we
support.
This closes#165
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Wido den Hollander
Paul Angus
Gabriel Beims Bräscher
Sid Kattoju
Nicolas Vazquez
Vladimir Melnik
ustcweizhou
Rohit Yadav
Frank Maximus
Gabriel Beims Bräscher
dahn
Nathan Johnson
Bitworks LLC
Rohit Yadav
Simon Weller
Abhishek
Slair1
Khosrow Moossavi
Paul Angus
Daan Hoogland
cl-k-takahashi
Mike Tutkowski
Kui LIU
brett
lzh3636
Frank Maximus
Rafael Weingärtner
Marc-Aurèle Brothier
Remi Bergsma
Sigert Goeminne
Abhinandan Prateek
Suresh Kumar Anaparti
Wei Zhou
Rajani Karuturi
Rajani Karuturi
Bharat Kumar
Jayapal
Rajani Karuturi
Nathan Johnson
Kishan Kavala
Abhinandan Prateek
Nemo
John Burwell
Will Stevens
Aaron Hurt
Aaron Hurt
Sverrir A. Berg
Mike Tutkowski
Maneesha.P
NuxRo
Dmytro Shevchenko
Koushik Das
Daan Hoogland
Boris Schrijver
Nick Livens
Josh Harshman
cirstofolini
Wilder Rodrigues
David Mabry
Satoru Nakaya
Kevin McCormick
Rajani Karuturi
Aaron Brady
Wido den Hollander
Rafael da Fonseca
Laszlo Hornyak
Daan Hoogland