[4.10] CLOUDSTACK-8746: VM Snapshotting implementation for KVM
* pr/977:
Fixes for testing VM Snapshots on KVM. Related to PR 977
CLOUDSTACK-8746: vm snapshot implementation for KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This commit implements Ingress and Egress filtering for IPv6 in
Basic Networking.
It allows for opening and closing ports just as can be done with IPv4.
Rules have to be specified twice, once for IPv4 and once for IPv6, for
example:
- 22 until 22: 0.0.0.0/0
- 22 until 22: ::/0
Egress filtering works the same as with IPv4. When no rule is applied all
traffic is allowed. Otherwise only the specified traffic (with DNS being
the exception) is allowed.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
CLOUDSTACK-9534: Allow VR to be destroy in UI when in running stateThis allows us to destroy a VR that is in running state from the UI. This action is possible via cloudmonkey/APIs, and would be useful for anyone who wants to simply destroy a VR from the UI without having to stop it first.
As this is a pure UI fix, manual testing would be needed but no regression integration testing is necessary.
/cc @jburwell @karuturi
@blueorangutan package
Screenshot:
* pr/1701:
CLOUDSTACK-9534: Allow VR to be destroy in UI when in running state
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UIJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9438
### Introduction
From #1361 it was possible to configure NFS version for secondary storage mount.
However, changing NFS version requires inserting an new detail on `image_store_details` table, with `name = 'nfs.version'` and `value = X` where X is desired NFS version, and then restarting management server for changes to take effect.
Our improvement aims to make NFS version changeable from UI, instead of previously described workflow.
### Proposed solution
Basically, NFS version is defined as an image store ConfigKey, this implied:
* Adding a new Config scope: **ImageStore**
* Make `ImageStoreDetailsDao` class to extend `ResourceDetailsDaoBase` and `ImageStoreDetailVO` implement `ResourceDetail`
* Insert `'display'` column on `image_store_details` table
* Extending `ListCfgsCmd` and `UpdateCfgCmd` to support **ImageStore** scope, which implied:
** Injecting `ImageStoreDetailsDao` and `ImageStoreDao` on `ConfigurationManagerImpl` class, on `cloud-server` module.
### Important
It is important to mention that `ImageStoreDaoImpl` and `ImageStoreDetailsDaoImpl` classes were moved from `cloud-engine-storage` to `cloud-engine-schema` module in order to Spring find those beans to inject on `ConfigurationManagerImpl` in `cloud-server` module.
We had this maven dependencies between modules:
* `cloud-server --> cloud-engine-schema`
* `cloud-engine-storage --> cloud-secondary-storage --> cloud-server`
As `ImageStoreDaoImpl` and `ImageStoreDetailsDao` were defined in `cloud-engine-storage`, and they needed in `cloud-server` module, to be injected on `ConfigurationManagerImpl`, if we added dependency from `cloud-server` to `cloud-engine-storage` we would introduce a dependency cycle. To avoid this cycle, we moved those classes to `cloud-engine-schema` module
* pr/1615:
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Use available context to filter a metrics view based on zone, cluster, host
in the context object. This fixes metrics view filtering when metrics view is
viewed via Zone->Compute and Storage-> for a resource.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This allows admins/users to destroy a VR that is in running state from the UI.
This action is possible via cloudmonkey/APIs.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Add projectid to project details pageDisplay the project ID on the details view of a project.
* pr/1630:
Add to project detail page: cpu,memory,template,storage and VMs count
add projectid to project details page
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Simplifies change password transactional logic without using pessmistic locks
- Adds a re-enter password field in the UI to valid ipmi/oobm password
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The resize volume is support on all major hypervisors (Xen, VMware, KVM).
The hypervisor key is returned by the list volumes response only for admins
but not for users or domain admin users. This removes the check, as the operation
is supported on all major hypervisors that CloudStack supports.
With this changes all users would see resize volume button in the UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
This PR addresses the following JIRA ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-8813
The problem is that there needs to be notifications sent when a host is added to, about to be removed from, and removed from a cluster.
Such notifications can be used for many purposes. For example, it can allow storage plug-ins to update ACLs on their storage systems. Also, it can allow us to clean up IQNs from ESXi hosts that are no longer needed.
* pr/816:
CLOUDSTACK-8813: Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Support access to a host’s out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature `ipmisim` can be used:
https://pypi.python.org/pypi/ipmisim
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8562: Dynamic Role-Based API Checker for CloudStack### CLOUDSTACK-8562: DB-Backed Dynamic Role Based API Access Checker
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
* pr/1489:
maven: Fix jstl version usage
CLOUDSTACK-8562: Deprecate commands.properties
CLOUDSTACK-8562: DB-Backed Dynamic Role Based API Access Checker
CLOUDSTACK-9361: Centrally handle API validations
Signed-off-by: Will Stevens <williamstevens@gmail.com>
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9194: Making the console popup window resizable in IE to make sure the focus is not losthttps://issues.apache.org/jira/browse/CLOUDSTACK-9194
To test:
Open any VM console in IE, and try resizing the browser window of console
It should be resizable.
* pr/1270:
CLOUDSTACK-9194: Making the console popup window resizable in IE to make sure the focus is not lost.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9322: Support for Internal LB fuctionality with Nuage VSP SDN Plugin including Marvin test coverageTask: https://issues.apache.org/jira/browse/CLOUDSTACK-9322
PR contents:
1) UI changes to support LB provider InternalLbVm during VPC offering creation.
2) Bug fix for CLOUDSTACK-9320.
3) Nuage VSP SDN Plugin related enhancements for VPC network functionality.
4) Marvin test coverage for Internal LB support on master with Nuage VSP SDN Plugin.
5) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
6) PEP8 & PyFlakes compliance with our Marvin test code.
Test run:
CloudStack$ nosetests --with-marvin --marvin-config=nuage_ant.cfg test/integration/plugins/nuagevsp/ -a tags=nuagevsp
Test results:
Test user data and password reset functionality with Nuage VSP SDN plugin ... === TestName: test_nuage_UserDataPasswordReset | Status : SUCCESS ===
ok
Test Nuage VSP VPC Offering with different combinations of LB service providers ... === TestName: test_01_nuage_internallb_vpc_Offering | Status : SUCCESS ===
ok
Test Nuage VSP VPC Network Offering with and without Internal LB service ... === TestName: test_02_nuage_internallb_vpc_network_offering | Status : SUCCESS ===
ok
Test Nuage VSP VPC Networks with and without Internal LB service ... === TestName: test_03_nuage_internallb_vpc_networks | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with different combinations of Internal LB rules ... === TestName: test_04_nuage_internallb_rules | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality by performing (wget) traffic tests within a VPC ... === TestName: test_05_nuage_internallb_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with different LB algorithms by performing (wget) traffic tests ... === TestName: test_06_nuage_internallb_algorithms_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with restarts of VPC network components by performing (wget) ... === TestName: test_07_nuage_internallb_vpc_network_restarts_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with InternalLbVm appliance operations by performing (wget) ... === TestName: test_08_nuage_internallb_appliance_operations_traffic | Status : SUCCESS ===
ok
Test Basic VPC Network Functionality with Nuage VSP SDN plugin ... === TestName: test_nuage_vpc_network | Status : SUCCESS ===
ok
Test Nuage VSP SDN plugin with basic Isolated Network functionality ... === TestName: test_nuage_vsp | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 11 tests in 12094.705s
OK
Test run logs:
[results.txt](https://github.com/apache/cloudstack/files/187587/results.txt)
[runinfo.txt](https://github.com/apache/cloudstack/files/187588/runinfo.txt)
Test config file:
[nuage_ant.txt](https://github.com/apache/cloudstack/files/222711/nuage_ant.txt)
Note: Attached the Marvin config file as .txt instead of .cfg.
PEP8 & PyFlakes Compliance:
CloudStack$ pep8 --max-line-length=150 test/integration/plugins/nuagevsp/*.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/nuageTestCase.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_password_reset.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vpc_internal_lb.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vpc_network.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vsp.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/*.py
#CLOUDSTACK-9322
* pr/1452:
CLOUDSTACK-9322 : Marvin tests for Internal Lb with Nuage VSP
CLOUDSTACK-9320 : InternalLBVM is not getting destroyed when the last Internal Load Balancer rule is removed for the corresponding source IP address
CLOUDSTACK-9322 : Changes to support InternalLbVm with Nuage VSP plugin
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9172 Added cross zones check to delete template and iso
Check the existence of 'forceencap' parameter before use
systemvm: set default umask 022 in injectkeys.sh
* 4.7:
CLOUDSTACK-9172 Added cross zones check to delete template and iso
Check the existence of 'forceencap' parameter before use
systemvm: set default umask 022 in injectkeys.sh
CLOUDSTACK-9172 Added cross zones check to delete template and isoAdded a check to ignore the zoneid, in the delete template UI, if the template is cross zones.
reference : CLOUDSTACK-9172
* pr/1505:
CLOUDSTACK-9172 Added cross zones check to delete template and iso
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9272: No option in UI to add GSLB with service type "HTTP"
CLOUDSTACK-9270: UI alignment gone bad in multiple places - VM Instance, Network, Egress rules
* 4.7:
CLOUDSTACK-9272: No option in UI to add GSLB with service type "HTTP"
CLOUDSTACK-9270: UI alignment gone bad in multiple places - VM Instance, Network, Egress rules
CLOUDSTACK-9272: No option in UI to add GSLB with service type "HTTP"Steps to Repro:
============
Go to Regions -> Local -> View GSLB -> Add GSLB
Click on the service type dropdown
Observe http is missing. Please see the attached snapshot.
Expected Behaviour:
================
As it supports http also, So http should be in the list.
Actual Behaviour:
==============
http is missing from the list.
Fix:
===
It supports http also. Added http to the list.
Snapshot:
========
<img width="531" alt="gslb-http-missing-nitin" src="https://cloud.githubusercontent.com/assets/12583725/12772818/21513dc0-ca5b-11e5-822e-e2dd2426da65.png">
* pr/1399:
CLOUDSTACK-9272: No option in UI to add GSLB with service type "HTTP"
Signed-off-by: Koushik Das <koushik@apache.org>
CLOUDSTACK-9268: Display VM in Load balancing rule in UISteps of Repro:
=============
1:Create VMs
2:Make LoadBalancing rule in GUI
Name:WWW
PrivatePort:80
PublicPort:80
Add VMs:some VMs
Expected Result:
==============
The VMs which has been already assigned is should not be listed when you add the VM to an existing rule.
Actual Result:
===========
The VMs which has been already assigned is still being listed when you add the VM to an existing rule.
Fix:
===
Added jsonObj to newly created row in multiedit.js to stop listing the same VM again.
* pr/1394:
CLOUDSTACK-9268: Display VM in Load balancing rule in UI
Signed-off-by: Koushik Das <koushik@apache.org>
This fixes a typographical error in UI that did not previously send fetchLatest
flag in the listCapacity API request.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The field we use most are now on the top:
- name
- state
- hypervisor
- link local ip
- redundant state
The other fields are nice, but not needed most of the time.
* 4.8:
Display hostname the VPC router runs on
CLOUDSTACK-9266: Make deleting static routes in private gw work
CLOUDSTACK-9264: Make /32 static routes for private gw work
* 4.7:
Display hostname the VPC router runs on
CLOUDSTACK-9266: Make deleting static routes in private gw work
CLOUDSTACK-9264: Make /32 static routes for private gw work
This is displayed on Infra tab and it's annoying that on the VPC
page only the link local is mentioned and not the hostname. That is
now corrected, so you have the correct details to login to the
router straight away.
This commit includes three changes:
(1) Revert commit 13bf1ec5da to show the 'root disk size' field
(2) Set the default value from '1' to empty. This also changes the default value of customized service offerings from '1' to empty.
(3) show 'root disk size' field only when users choose a KVM template, as cloudstack supports deployvm with rootdisksize on KVM only.
trailing commas in javascripts removedAccording to SonarQube this is a bug on internet explorer. It is the only 'blocker' level issue in cloudstack. @abhinandanprateek (@agneya2001) @bhaisaab @miguelaferreira should we enforce this or, as alternative, have it disabled in SonarQube?
* pr/1288:
trailing commas in javascripts removed
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.7:
CLOUDSTACK-9254: Make longer names display pretty
CLOUDSTACK-9245 - Deletes ACL items when destroying the VPC or deleting the ACL itself
CLOUDSTACK-9245 - Formatting NetworkACLServiceImpl class
CLOUDSTACK-9245 - Formatting VpcManagerImpl class
CLOUDSTACK-9245 - Formatting NetworkACLManagerImpl class
More VR performance!
* 4.7:
CLOUDSTACK-9237: Create LB Healthcheck issues - button alignment and error message goes outside the window
CLOUDSTACK-9235: Autoscale button is missing in VPC
CLOUDSTACK-9229: Autoscale policy creation failing in VPC due to zoneid missing in createAutoScaleVmProfile
CLOUDSTACK-9229: Autoscale policy creation failing in VPC due to zone id missing in createAutoScaleVmProfileAutoscale policy creation is failing on VPC while creating autoscalevmprofile since zoneid parameter is missing.
Steps to Reproduce:
================
1. Create VPC Network offering with NS as service provider for LB
2. Create VPC using offering which has NetScaler as LB provider
3. Add a tier using the network offering created in Step1
4. Launch a VM
5. Acquire a public IP
6. Create an auto scale policy with all required parameters on an LB rule
Result:
======
Fails during autoscalevmprofile creation with the following error:
GET command=createAutoScaleVmProfile&response=json&serviceofferingid=05ac866f-604c-43e2-a48b-47e83ef7c4f1&templateid=3cdd83c4-ad27-11e5-9eaf-42407779c24b&destroyvmgraceperiod=30&counterparam%5B0%5D.name=snmpcommunity&counterparam%5B0%5D.value=public&counterparam%5B1%5D.name=snmpport&counterparam%5B1%5D.value=161&_=1451458073663
DEBUG [o.a.c.a.BaseCmd] (catalina-exec-10:ctx-58bcf6cf ctx-f5123e30) (logid:ae6742c8) Ignoring paremeter fordisplay as the caller is not authorized to pass it in
INFO [c.c.a.ApiServer] (catalina-exec-10:ctx-58bcf6cf ctx-f5123e30) (logid:ae6742c8) Unable to execute API command autoscalevmprofile due to missing parameter zoneid
Expected Result:
=============
Autoscale policy creation should be successful and the "min" number of VMs specified in the policy should be deployed.
Following should be the params for autoscalevmprofile creation:
command=createAutoScaleVmProfile&response=json&zoneid=0b43fff3-c069-417b-ac0c-e4dc46b407ea&serviceofferingid=0
5ac866f-604c-43e2-a48b-47e83ef7c4f1&templateid=3cdd83c4-ad27-11e5-9eaf-42407779c24b&destroyvmgraceperiod=30&counterparam%5B0%5D
.name=snmpcommunity&counterparam%5B0%5D.value=public&counterparam%5B1%5D.name=snmpport&counterparam%5B1%5D.value=161
Fix:
===
Added a conditon to check whether the zoneid in networks is undefined,
If that is undefined, it gets the zoneid from ipaddresses argument.
Fixed a localization issue.
* pr/1334:
CLOUDSTACK-9229: Autoscale policy creation failing in VPC due to zoneid missing in createAutoScaleVmProfile
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9235: Autoscale button is missing in VPCAutoscale button is missing. This should not be the case since we are able to add NS as the external LB provider in VPC.
Steps:
=====
1. Create a VPC offering with NS as the external LB provider
2. Create a VPC and configure the public tier with the above offering
3. Acquire an IP address and try to configure Load Balancing rule
Result:
======
Autoscale option is not visible at all for the LB.
Expected Result:
=============
Autoscale option should be available and should work exactly like the way it works for a normal isolated network with NS. If we choose NS as service provider for LB, autoscale should also be visible. If VR is chosen, only then we should not display autoscale.
Fix:
===
In case of VPC, it checks the services available.
If LB is there, It checks the provider is Netscaler then it shows the button or hides it.
* pr/1337:
CLOUDSTACK-9235: Autoscale button is missing in VPC
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Refactor public ip retrieval into method
CLOUDSTACK-9244 Fix setting up RFC1918 routes
CLOUDSTACK-9239 throw exception on deprecated command
Enhance VR performance by selectively executing tasks instead of brute-forcing
CLOUDSTACK-9236: Load Balancing Health Check button displayed when non-NetScaler offering is used
CLOUDSTACK-9236: Load Balancing Health Check button displayed when non-NetScaler offering is usedLoad balancing health check option / button should only be displayed when a NetScaler based networking offering is being used.
If you try to use the health check option when NetScaler is not being used as the load balancing technology the UI throws an error stating that the health check option is not supported.
This button / option should be removed from the UI if NetScaler is not included in the network offering as customers will be confused.
Fix:
===
This button will be shown only when the load balancer is NetScaler.
Otherwise it is hidden.
* pr/1338:
CLOUDSTACK-9236: Load Balancing Health Check button displayed when non-NetScaler offering is used
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9132: API createVolume takes empty string for name parameterSteps to Reproduce:
================
Create a volume using createVolume API where parameter name is empty.
It creates a volume with empty name.
But the name parameter is mandatory.(Issue)
Expected Behaviour:
================
It shouldn't create a volume with an empty name. Error should be returned.
Solution:
=======
Added a condition to check in case of empty string. If the name is an empty string, it generates a random name for the volume. Made the name field optional in UI as well as in API.
* pr/1319:
CLOUDSTACK-9132: API createVolume takes empty string for name parameter
Signed-off-by: Remi Bergsma <github@remi.nl>
- Implement Search boxes in all Metrics views
- Fix threshold calculations for host and storage pool metrics view
- Consider overcommit ratios for calculation allocated thresholds
- Save/pass context while navigating across resources and metrics view
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9230: Remove unnecessary return statement from cloudStack.jsRemoved the unnecessary return statement.
The statement is never reached.
* pr/1335:
CLOUDSTACK-9230: Remove unnecessary return statement from cloudStack.js
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin user
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failing
CLOUDSTACK-6485 prevent ip asignment of private gw iface
CLOUDSTACK-9204 Do not error when staticroute is already gone
make both check lines consistent
CLOUDSTACK-9181 Prevent syntax error in checkrouter.sh
CLOUDSTACK-9202 Bump ssh timeout
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failingReproducible Steps:
================
1.Create a customer gateway for a VPC.
2.Edit it using UI(API call is UpdateVpnCustomerGateway).
3.When we try to update the customer vpn gateway with connection state is not in "Error", we see the API error but that won't be reflected to the user in UI.
Actual Behaviour:
==============
The API throws error. But UI doesn't show it to user.
Expected Behaviour:
================
The UI should show the error to user.
Fix:
===
TypeError: json.updatecustomergatewayresponse is undefined
The response name was wrong so corrected it.
It should be json.updatevpncustomergatewayresponse.
Added the error function.
* pr/1300:
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failing
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin userIssue:
=====
Root admin cannot see LB rules and Public LB IP addresses created by domain-admin in UI therefore root admin cannot manage those.
Reproducible Steps:
================
Log in as a Domain-Admin account and create a VPC with vpc virtual router as public load balancer provider
click on the newly created VPC -> click on the VPC tier -> click internal LB
Add internal LB,
Logoff domain-admin and login as root admin
Navigate the VPC created previously and click internal LB, internal lb is not showing up.
Same steps for Public LB IP addresses except select the correct Network offering while creating a tier.
Expected Behaviour:
================
Root admin should be able to manage VPC created by Domain admin user .
Actual Behaviour:
==============
Root admin cannot see VPC created by Domain admin user and hence not able to manage it.
Fix:
===
Added the parameter listAll=true in case of Internal LB as well as Public LB IP addresses.
* pr/1301:
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin user
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] ADD Force UDP encapsulation option to Site2Site VPNThis PR adds the option to enable forced UDP encapsulation of ESP packets during a setup of a site2site vpn. This options enforces the 'forceencaps' option in the openswan ipsec config:
https://wiki.strongswan.org/projects/strongswan/wiki/ConnSection
* pr/1317:
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
Signed-off-by: Remi Bergsma <github@remi.nl>
Added a conditon to check whether the zoneid in networks is undefined,
If that is undefined, it gets the zoneid from ipaddresses argument.
Fixed a localization issue.
Jayant Patil
Rajani Karuturi
Wido den Hollander
Wei Zhou
nvazquez
Rohit Yadav
Syed
pdumbre
Frank Maximus
Nitin Kumar Maharana
Milamber
Nick Livens
Mike Tutkowski
Pierre-Luc Dion
Will Stevens
Koushik Das
Patrick Dube
Remi Bergsma
Rafael Weingärtner
