In some virtual routers, 'hostname -f' returns 'localhost'. The hostname is also 'localhost' in `/var/log/messages`. This change can fix the issue in new VRs.
In order to reduce memory footprint and improve boot speed/predictability.
The following changes have been made:
- add vm.min_free_kbytes to sysctl
- periodically clear disk cache (depending on memory size)
- only start guest services specific to hypervisor
- use systemvm code to determine hypervisor type (not systemd)
- start cloud service at end of post init rather than through systemd
- reduce initial threads started for httpd
- fix vmtools config file
Fixes#3039
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On VMware Zone, hitting CTRL over Console Proxy will send a mask of
Meta key as well. This makes Ctrl+A, Ctrl+E and many functionalities
to not work in console.
Read https://github.com/apache/cloudstack/issues/3229 for
details
For fixing ignore Meta key flag passed by SDK if Control was pressed.
The Jquery implementation sets the meta key to control key to support
IE.
Fixes#3229
This does not remove VM entries in dbags when hostnames match. The
current codebase already removes entry when a VM is stopped/removed so
we don't need to handle lazy removal. This will allow a VM on
multiple-tiers in a VPC to get dns/dhcp rules as expected.
This also fixes the issue of dhcp_release based on a specific interface and
removes dhcp/dns entry when a nic is removed on a guest VM.
Fixes#3273
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The VR code has provision for inserting rules at the top or bottom by specifying "front" as the second parameter to self.fw.append. However, there are a number of cases where someone has been unaware of this and added a rule with the pattern self.fw.append(["mangle", "", "-I PREROUTING".... This causes the code to check for the rule already being present to fail, and duplicate rules end up being added.
This PR fixes two of these cases which apply to adding static NAT rules. I am aware of more of these cases, but I don't have the ability to easily test the outcome of fixing them. I'm happy to add these in if you're confident that the automated tests will be sufficient. Searching for "-I (case sensitive) finds these.
The code for dealing with "front" is included below to show that this shouldn't have any ill effects:
if fw[1] == "front":
cpy = cpy.replace('-A', '-I')
Fixes#3177
Since the CloudStack virtual router was redesigned on version 4.6 it has been observed that the DHCP leases file is not persistent across network operations. This causes conflicts on guest VMs static IPs, causing these static IPs to not be renewed by the DHCP server running on isolated and VPC networks' virtual routers (dnsmasq). On stopping or destroying a VM, its dhcp/dns records are not removed from the virtual router causing ghost effects.
Fixes#3272Fixes#3354
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR resolves 2 issues related to Virtual Routers with multiple public interfaces, and works around a third.
- Fixes#3353 - Adds missing throw routes for eth0/eth1 to eth3+ when there are >1 public IPs
- Fixes#3168 - Incorrect marks set on some static NAT rules (some code references were changed from hex(int(interfacenum)) to hex(100 + int(interfacenum)) - this change just adds the remaining ones
- Fixes#3352 - Work around that sends Gratuitous ARP messages when a HA VR becomes master to work around the problem of the MAC address being different between HA VRs. If that issue is fixed properly (i.e. a database entry for the subsequent interfaces so they can be static) then this is unnecessary, though should not cause any problems.
On first startup, the management server creates and saves a random
ssh keypair using ssh-keygen in the database. The command does
not specify keys in PEM format which is not the default as generated
by latest ssh-keygen tool.
The systemvmtemplate always needs re-building whenever there is a change
in the cloud-early-config file. This also tries to fix that by introducing a
stage 2 bootstrap.sh where the changes specific to hypervisor detection
etc are refactored/moved. The initial cloud-early-config only patches
before the other scripts are called.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes PR #3146 db cleanup to the correct 4.12->4.13 upgrade path
- Fixes failing unit test due to jdk specific changes after forward
merging
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new patching script for patching systemvms on KVM
using qemu-guest-agent that runs inside the systemvm on startup. This
also removes the vport device which was previously used by the legacy
patching script and instead uses the modern and new uniform guest
agent vport for host-guest communication.
Also updates the sytemvmtemplate build config to use the latest Debian
9.9.0 iso.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* systemd: fix services to allow TLS configurations via java.security.ciphers
This fixes the management server and systemd services to allow the
java.security.ciphers file to configure disabled TLS protocols and
algorithms. This also cleans up systemd service files for agent and
usage server.
This fixes#3140
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* configure: fix travis failure due pycodestyle error
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
After upgrade from CS 4.10 to CS 4.11, multiple VRs did not start through.
It did not properly defer the finalize config in update_config.py.
Apparently, the json files are now called differently: where it used to
be vm_dhcp_entry.json it now has a uuid added, for example
vm_metadata.json.4d727b6e-2b48-49df-81c3-b8532f3d6745.
The if statement that checks if the finalize can be safely deferred
therefore no longer matches. This PR contains a fix so finalize is
defered again.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes an issue for systemvms (CPVM and SSVM) on VMware, as eth0
is not programmed (link-local) the networking.service fails to start
which is a dependency for cloud-postinit service. When cloud-postinit
service fails to start/run, it fails to start the agent (cloud) process.
This fixes the smoketest failures we saw in case of VMware 6.5 with
4.11.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This tries to provide a threshold based fix for #2873 where swappinness of VR is not used until last resort. By limiting swappiness unless actually needed, the VR system degradation can be avoided for most cases. The other change is around not starting baremetal-vr by default on all VRs, according to the spec https://cwiki.apache.org/confluence/display/CLOUDSTACK/Baremetal+Advanced+Networking+Support only vmware VRs need to run it and that too only as the last step of the setup/completion, so we don't need to run it all the time.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We see a suspicious continuous increase in memory usage. Kind of looks like a memory leak.
One thing noted during debugging is that flask is started in debug mode. This is not best practice for a production system.
This fixes a regression introduced in #2799, by exporting $TYPE
before the `patch` is called to patch/extract archives for ssvm/cpvm.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMware router will be rebooted based on #2794, per current config
the VRs on reboot will go through fsck checks slowing down the deployment
process by few seconds. This will ensure that fsck checks are done
on every 3rd boot of the VR. The `4` is used because 1st boot is done
during the build of systemvmtemplate appliance.
Add upgrade path for a new 4.11.2 systemvmtemplate.
Other changes:
- Add support for XS 7.5 Fixes#2834.
- Reboot VR only if mgmt gw is not pingable on vmware.
- Enable passive ftp by enabling nf_conntrack_helper. This is change in behaviour since linux 4.7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Arping command in virtual-router was called anyway on python code.
on file: merge.py
line 239, in this code : "dp['gateway'] ='None' ''
later on CsAddress.py line 303
if 'gateway' in self.address:
self.arpPing()
This string 'None' makes if steatement always be true
the solution on #2806 makes dp['gateway'] =''
Cannot be None type because there is a string operation later on code.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.11:
Changed the implementation of isVolumeOnManagedStorage(VolumeInfo) to check if the data store in question is for primary storage (and added a unit test from Daan Hoogland)
vmware: reboot VR after mac updates (#2794)
This re-introduces the rebooting of VR after setup of nics/macs in
case of VMware. It also adds a minor enhancement to show the console
esp. for root admins when VRs and systemvms are in starting state.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Previously, the ethernet device index was used as rt_table index and
packet marking id/integer. With eth0 that is sometimes used as link-local
interface, the rt_table index `0` would fail as `0` is already defined
as a catchall (unspecified). The fwmarking on packets on eth0 with 0x0
would also fail. This fixes the routing issues, by adding 100 to the
ethernet device index so the value is a non-zero, for example then the
relationship between rt_table index and ethernet would be like:
100 -> Table_eth0 -> eth0 -> fwmark 100 or 0x64
101 -> Table_eth1 -> eth1 -> fwmark 101 or 0x65
102 -> Table_eth2 -> eth2 -> fwmark 102 or 0x66
This would maintain the legacy design of routing based on packet mark
and appropriate routing table rules per table/ids. This also fixes a
minor NPE issue around listing of snapshots.
This also backports fixes to smoketests from master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
This is a new feature for CS that allows Admin users improved
troubleshooting of network issues in CloudStack hosted networks.
Description: For troubleshooting purposes, CloudStack administrators may wish to execute network utility commands remotely on system VMs, or request system VMs to ping/traceroute/arping to specific addresses over specific interfaces. An API command to provide such functionalities is being developed without altering any existing APIs. The targeted system VMs for this feature are the Virtual Router (VR), Secondary Storage VM (SSVM) and the Console Proxy VM (CPVM).
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+Remote+Diagnostics+API
ML discussion:
https://markmail.org/message/xt7owmb2c6iw7tva
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
Using Source NAT option on Private Gateway does not work
This fixes#2680
## Description
<!--- Describe your changes in detail -->
When you use the Source NAT feature of Private Gateways on a VPC. This should Source NAT all traffic from CloudStack VMs going towards IPs reachable through Private Gateways.
This change in this PR, stops adding the Source CIDR to SNAT rules. This should be discussed/reviewed, but i can see no reason why the Source CIDR is needed. There can only be one SNAT IP per interface, except for Static (one-to-one) NATs, which still work with this change in place. The outbound interface is what matters in the rule.
<!-- For new features, provide link to FS, dev ML discussion etc. -->
<!-- In case of bug fix, the expected and actual behaviours, steps to reproduce. -->
##### SUMMARY
<!-- Explain the problem/feature briefly -->
There is a bug in the Private Gateway functionality, when Source NAT is enabled for the Private Gateway. When the SNAT is added to iptables, it has the source CIDR of the private gateway subnet. Since no VMs live in that private gateway subnet, the SNAT doesn’t work.
##### STEPS TO REPRODUCE
<!--
For bugs, show exactly how to reproduce the problem, using a minimal test-case. Use Screenshots if accurate.
For new features, show how the feature would be used.
-->
<!-- Paste example playbooks or commands between quotes below -->
Below is an example:
- VMs have IP addresses in the 10.0.0.0/24 subnet.
- The Private Gateway address is 10.101.141.2/30
In the outputs below, the SOURCE field for the new SNAT (eth3) only matches if the source is 10.101.141.0/30. Since the VM has an IP address in 10.0.0.0/24, the VMs don’t get SNAT’d as they should when talking across the private gateway. The SOURCE should be set to ANYWHERE.
##### BEFORE ADDING PRIVATE GATEWAY
~~~
Chain POSTROUTING (policy ACCEPT 1 packets, 52 bytes)
pkts bytes target prot opt in out source destination
2 736 SNAT all -- any eth2 10.0.0.0/24 anywhere to:10.0.0.1
16 1039 SNAT all -- any eth1 anywhere anywhere to:46.99.52.18
~~~
<!-- You can also paste gist.github.com links for larger files -->
##### EXPECTED RESULTS
<!-- What did you expect to happen when running the steps above? -->
~~~
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 SNAT all -- any eth3 anywhere anywhere to:10.101.141.2
2 736 SNAT all -- any eth2 anywhere anywhere to:10.0.0.1
23 1515 SNAT all -- any eth1 anywhere anywhere to:46.99.52.18
~~~
##### ACTUAL RESULTS
<!-- What actually happened? -->
<!-- Paste verbatim command output between quotes below -->
~~~
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 SNAT all -- any eth3 10.101.141.0/30 anywhere to:10.101.141.2
2 736 SNAT all -- any eth2 10.0.0.0/24 anywhere to:10.0.0.1
23 1515 SNAT all -- any eth1 anywhere anywhere to:46.99.52.18
~~~
## Types of changes
<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply: -->
- [ ] Breaking change (fix or feature that would cause existing functionality to change)
- [ ] New feature (non-breaking change which adds functionality)
- [X] Bug fix (non-breaking change which fixes an issue)
- [ ] Enhancement (improves an existing feature and functionality)
- [ ] Cleanup (Code refactoring and cleanup, that may add test cases)
## GitHub Issue/PRs
<!-- If this PR is to fix an issue or another PR on GH, uncomment the section and provide the id of issue/PR -->
<!-- When "Fixes: #<id>" is specified, the issue/PR will automatically be closed when this PR gets merged -->
<!-- For addressing multiple issues/PRs, use multiple "Fixes: #<id>" -->
Fixes: #2680
## Screenshots (if appropriate):
## How Has This Been Tested?
<!-- Please describe in detail how you tested your changes. -->
<!-- Include details of your testing environment, and the tests you ran to -->
<!-- see how your change affects other areas of the code, etc. -->
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
<!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
- [x] I have read the [CONTRIBUTING](https://github.com/apache/cloudstack/blob/master/CONTRIBUTING.md) document.
- [x] My code follows the code style of this project.
- [ ] My change requires a change to the documentation.
- [ ] I have updated the documentation accordingly.
Testing
- [ ] I have added tests to cover my changes.
- [ ] All relevant new and existing integration tests have passed.
- [ ] A full integration testsuite with all test that can run on my environment has passed.
This ensures that password server runs on the dhcpserver identifier
IP which is the not the VRRP virtual (10.1.1.1) IP by default but
the actual ip of the interface. When dhcp client discovery is made,
the `dhcp-server-identifier` contains the non VIP address that is
used by password reset script to query guest VM password.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a rolling restart of VRs when networks are restarted
with cleanup option for isolated and VPC networks. A make redundant option is
shown for isolated networks now in UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes the issue that post-upgrade egress rules are not applied
on VR, restarting the network with cleanup used to be the workaround.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes incorrect xenstore-read binary path, this failed systemvm
to be patched/started correctly on xenserver. The other fix is to keep
the xen-domU flag that may be returned by virt-what. This effect
won't change the cmdline being consumed as the mgmt server side (java)
code sets the boot args in both xenstore and as pv args. The systemvm's
/boot is ext2 that can be booted by PyGrub on both old and recent
XenServer versions.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On patching, the global cacerts keystore is imported in 'cloud' service
specific local keystore. This fixes#2541.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This adds support for XenServer 7.3 and 7.4, and XCP-ng 7.4 version as hypervisor hosts. Fixes#2523.
This also fixes the issue of 4.11 VRs stuck in starting for up-to 10mins, before they come up online.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes routing table rule setup regression to correctly router
marked packets based on interface related ip route tables. This thereby
fixes the access of VMs in the same VPC using NAT/SNAT public IPs.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
While debugging the VR for #2579, I noticed that one of the scripts were breaking. The variable RROUTER was not set and this broke a conditional.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dependencies update
* Add extra blank line required by ...!?
* fix W605 invalid escape sequence and more blank lines
* print all installed python packages versions
* systemvm: turn off apache2 server tokens and signature
This turns off apache2 server version signature/token in headers.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* systemvm: remove invalid code as conf.d is not available now
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-10341: VR minor fixes to systemvmtemplate (#2468)
CLOUDSTACK-10340: Add setter to hypervisorType in VMInstanceVO (#2504)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes rsyslog: fix config error in rsylslog.conf
Feb 26 08:09:54 r-413-VM liblogging-stdlog[19754]: action '*' treated as ':omusrmsg:*' - please use ':omusrmsg:*' syntax instead, '*' will not be supported in the future [v8.24.0 try http://www.rsyslog.com/e/2184 ]
Feb 26 08:09:54 r-413-VM liblogging-stdlog[19754]: error during parsing file /etc/rsyslog.conf, on or before line 95: warnings occured in file '/etc/rsyslog.conf' around line 95 [v8.24.0 try http://www.rsyslog.com/e/2207 ]
- Run apache2 only after cloud-postinit
- Increase /run size for VR with 256M RAM
root@r-395-VM:~# systemctl daemon-reload
Failed to reload daemon: Refusing to reload, not enough space available on /run/systemd. Currently, 15.8M are free, but a safety buffer of 16.0M is enforced.
tmpfs 23M 6.5M 16M 29% /run
This fixes a difference issue in rVR heartbeat check script raised
recently on dev@.
Reduce logging to avoid logging to fill ramdisk
Make checkrouter return fault state when keepalived is not running
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This deprecates and remove TLS 1.0 and 1.1 from preferred list of
protocols and keeps only TLSv1.2.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10317: Fix SNAT rules for additional public nics
This allows networks with additional public nics to have correct
SNAT iptables rules applied on configuration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* update based on Wei's suggested change
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This might (and does block) in certain situations on the VR as
also explained in the Python documentation:
https://docs.python.org/2/library/subprocess.html#subprocess.Popen.wait
Warning This will deadlock when using stdout=PIPE and/or stderr=PIPE
and the child process generates enough output to a pipe such that
it blocks waiting for the OS pipe buffer to accept more data.
Use communicate() to avoid that.
Using the check_output function handles most of this for us and
also provides better error handling.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Delete dnsmasq's leases file when dnsmasq is restarted to avoid it
use old ip-mac-address-vm mapping leases.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In case of isolated, both self.config.is_vpc() and self.config.is_router() are false,
but self.config.is_dhcp() is true.
Moved the password server logic to the `if has_metadata` block,
as this is valid for all 3 systemvm types.
When the IPv4 address of a Instance changes we need to make sure the
old entry is removed from the DHCP lease file on the Virtual Router
otherwise the Instance will still get the old lease.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This includes test related fixes and code review fixes based on
reviews from @rafaelweingartner, @marcaurele, @wido and @DaanHoogland.
This also includes VMware disk-resize limitation bug fix based on comments
from @sateesh-chodapuneedi and @priyankparihar.
This also includes the final changes to systemvmtemplate and fixes to
code based on issues found via test failures.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes test failures around VMware with the new systemvmtemplate.
In addition:
- Does not skip rVR related test cases for VMware
- Removes rc.local
- Processes unprocessed cmd_line.json
- Fixed NPEs around VMware tests/code
- On VMware, use udevadm to reconfigure nic/mac address than rebooting
- Fix proper acpi shutdown script for faster systemvm shutdowns
- Give at least 256MB of swap for VRs to avoid OOM on VMware
- Fixes smoke tests for environment related failures
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Several systemvmtemplate optimizations
- Uses new macchinina template for running smoke tests
- Switch to latest Debian 9.3.0 release for systemvmtemplate
- Introduce a new `get_test_template` that uses tiny test template
such as macchinina as defined test_data.py
- rVR related fixes and improvements
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ports PR #1470 by @remibergsma.
Make the generated json files unique to prevent concurrency issues:
The json files now have UUIDs to prevent them from getting overwritten
before they've been executed. Prevents config to be pushed to the wrong
router.
2016-02-25 18:32:23,797 DEBUG [c.c.a.t.Request] (AgentManager-Handler-1:null) (logid:) Seq 2-4684025087442026584: Processing: { Ans: , MgmtId: 90520732674657, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.routing.GroupA
nswer":{"results":["null - success: null","null - success: [INFO] update_config.py :: Processing incoming file => vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b\n[INFO] Processing JSON file vm_dhcp_entry.json.4ea4506
1-2efb-4467-8eaa-db3d77fb0a7b\n"],"result":true,"wait":0}}] }
On the router:
2016-02-25 18:32:23,416 merge.py __moveFile:298 Processed file written to /var/cache/cloud/processed/vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b.gz
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactor cloud-early-config and make appliance specific scripts
- Make patching work without requiring restart of appliance and remove
postinit script
- Migrate to systemd, speedup booting/loading
- Takes about 5-15s to boot on KVM, and 10-30seconds for VMware and XenServer
- Appliance boots and works on KVM, VMware, XenServer and HyperV
- Update Debian9 ISO url with sha512 checksum
- Speedup console proxy service launch
- Enable additional kernel modules
- Remove unknown ssh key
- Update vhd-util URL as previous URL was down
- Enable sshd by default
- Use hostnamectl to add hostname
- Disable services by default
- Use existing log4j xml, patching not necessary by cloud-early-config
- Several minor fixes and file refactorings, removed dead code/files
- Removes inserv
- Fix dnsmasq config syntax
- Fix haproxy config syntax
- Fix smoke tests and improve performance
- Fix apache pid file path in cloud.monitoring per the new template
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Load the nf_conntrack_ipv6 module for IPv6 connection tracking on SSVM
- Move systemd services to /etc and enable services after they have been
installed
- Disable most services by default and enable in cloud-early-config
- Start services after enabling them using systemd
- In addition remove /etc/init.d/cloud as this is no longer needed and
done by systemd
- Accept DOS/MBR as file format for ISO images as well
Under Debian 7 the 'file' command would return:
debian-9.1.0-amd64-netinst.iso: ISO 9660 CD-ROM filesystem data UDF filesystem data
Under Debian 9 however it will return
debian-9.1.0-amd64-netinst.iso: DOS/MBR boot sector
This would make the HTTPTemplateDownloader in the Secondary Storage VM refuse the ISO as
a valid template because it's not a correct format.
Changes this behavior so that it accepts both.
This allows us to use Debian 9 as a System VM template.
Not sure though if enabling them is enough for systemd to still start them
on first boot
Signed-off-by: Wido den Hollander <wido@widodh.nl>
SystemVM changes to work on Debian 9
- Migrate away from chkconfig to systemctl
- Remove xenstore-utils override deb pkg
- Fix runlevel in sysv scripts for systemd
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We found bug in ACL rules for PrivateGateway for VPC
At a glance - rules not applied - switching Allow All or Deny All (default ACL) - showed as completed - but rules missed.
Result - traffic via PrivateGateway blocked by next DROP rule in next chains
How to reproduce:
Enable PrivateGateway for Cloudstack
Create VPC
Provision new PrivateGateway inside VPC with some VLAN
Change ACL (optional step to show that problem not in initial configuration but in config itself)
Expected:
ACL rules applied (inserted) into correspondig ACL_INBOUND/OUTBOUND chanins for PrivateGateway interface (ethX) based on ACL which user choose
Current:
No rules inserted. ACL_INBOUND/OUTBOUND_ethX - empty. Traffic blocked by next DROP rule in FORWARD chain
Affect - all our corporate customers blocked with access to their own nets via PG and vice-versa.
Root cause:
Issue happened because of CsNetFilter.py logic for inserting rules for ACL_INBOUND/OUTBOUND chains.
We choose rule numebr to isnert right before last DROP rule - but forget about fact - that if chain empty - we also return 0 as insert position. Which not true for iptables - numeration started from 0.
So we need very small patch to handle this special case - if number of rules inside chain equal to zero - return 1, else - return count of rules inside chain.
It's found only one - just because be default for PrivateGateway - we didn't insert any "service rules" (if SourceNat for PrivateGteway not ticked) - and we have by default empty ACL_INBOUND/OUTBOUND chains. Because same insert happened for all VPC networks (but when we call this insert - we already have at least 1 rule inside chains - and we successfully can process)
When auth strictness is set to true, terminate SSH handshake for clients
that do not present valid certificates.
This uses the `setNeedClientAuth`, where if the option is set and the
client chooses not to provide authentication information about itself,
the negotiations will stop and the engine will begin its closure
procedure:
https://docs.oracle.com/javase/7/docs/api/javax/net/ssl/SSLEngine.html#setNeedClientAuth(boolean)
During systemvm reboot, the conf folder is removed and certificate
re-setup is not done. This may cause the agent to not connect, this
fixes the case by backing up and restoring keystore and other config
files when re-patching is done after rebooting of a systemvm (cpvm, ssvm).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new certificate authority framework that allows
pluggable CA provider implementations to handle certificate operations
around issuance, revocation and propagation. The framework injects
itself to `NioServer` to handle agent connections securely. The
framework adds assumptions in `NioClient` that a keystore if available
with known name `cloud.jks` will be used for SSL negotiations and
handshake.
This includes a default 'root' CA provider plugin which creates its own
self-signed root certificate authority on first run and uses it for
issuance and provisioning of certificate to CloudStack agents such as
the KVM, CPVM and SSVM agents and also for the management server for
peer clustering.
Additional changes and notes:
- Comma separate list of management server IPs can be set to the 'host'
global setting. Newly provisioned agents (KVM/CPVM/SSVM etc) will get
radomized comma separated list to which they will attempt connection
or reconnection in provided order. This removes need of a TCP LB on
port 8250 (default) of the management server(s).
- All fresh deployment will enforce two-way SSL authentication where
connecting agents will be required to present certificates issued
by the 'root' CA plugin.
- Existing environment on upgrade will continue to use one-way SSL
authentication and connecting agents will not be required to present
certificates.
- A script `keystore-setup` is responsible for initial keystore setup
and CSR generation on the agent/hosts.
- A script `keystore-cert-import` is responsible for import provided
certificate payload to the java keystore file.
- Agent security (keystore, certificates etc) are setup initially using
SSH, and later provisioning is handled via an existing agent connection
using command-answers. The supported clients and agents are limited to
CPVM, SSVM, and KVM agents, and clustered management server (peering).
- Certificate revocation does not revoke an existing agent-mgmt server
connection, however rejects a revoked certificate used during SSL
handshake.
- Older `cloudstackmanagement.keystore` is deprecated and will no longer
be used by mgmt server(s) for SSL negotiations and handshake. New
keystores will be named `cloud.jks`, any additional SSL certificates
should not be imported in it for use with tomcat etc. The `cloud.jks`
keystore is stricly used for agent-server communications.
- Management server keystore are validated and renewed on start up only,
the validity of them are same as the CA certificates.
New APIs:
- listCaProviders: lists all available CA provider plugins
- listCaCertificate: lists the CA certificate(s)
- issueCertificate: issues X509 client certificate with/without a CSR
- provisionCertificate: provisions certificate to a host
- revokeCertificate: revokes a client certificate using its serial
Global settings for the CA framework:
- ca.framework.provider.plugin: The configured CA provider plugin
- ca.framework.cert.keysize: The key size for certificate generation
- ca.framework.cert.signature.algorithm: The certificate signature algorithm
- ca.framework.cert.validity.period: Certificate validity in days
- ca.framework.cert.automatic.renewal: Certificate auto-renewal setting
- ca.framework.background.task.delay: CA background task delay/interval
- ca.framework.cert.expiry.alert.period: Days to check and alert expiring certificates
Global settings for the default 'root' CA provider:
- ca.plugin.root.private.key: (hidden/encrypted) CA private key
- ca.plugin.root.public.key: (hidden/encrypted) CA public key
- ca.plugin.root.ca.certificate: (hidden/encrypted) CA certificate
- ca.plugin.root.issuer.dn: The CA issue distinguished name
- ca.plugin.root.auth.strictness: Are clients required to present certificates
- ca.plugin.root.allow.expired.cert: Are clients with expired certificates allowed
UI changes:
- Button to download/save the CA certificates.
Misc changes:
- Upgrades bountycastle version and uses newer classes
- Refactors SAMLUtil to use new CertUtils
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If a public IP is assigned to a VPC, a VM running inside that VPC cannot ping that public IP. This is due to the IPtables Nat rules set in such a way that drop any requests to the public IP from internal interfaces. I am fixing this so that internal hosts can also reach the public IP.
Reproduction:
Create a VPC
Create a network inside the VPC
Allocate a public IP
Create a VM in the network
Create a port forwarding rule enabling ICMP
ping the public IP inside the VM (this will fail)
This makes sure IP address is active.
After a vRouter is recreated (e.g. reboot via CloudStack UI) and Remote Access VPN enabled, VPN won't work anymore. Here is the abbreviated output of "ipsec auto -status" while we were having the issue:
root@r-10-VM:~# ipsec auto --status
000 using kernel interface: netkey
000 interface lo/lo 127.0.0.1
000 interface lo/lo 127.0.0.1
000 interface eth0/eth0 169.254.1.45
000 interface eth0/eth0 169.254.1.45
000 %myid = (none)
After this commit, the following occurs and VPNs work:
root@r-10-VM:~# ipsec auto --status
000 using kernel interface: netkey
000 interface lo/lo 127.0.0.1
000 interface lo/lo 127.0.0.1
000 interface eth0/eth0 169.254.1.45
000 interface eth0/eth0 169.254.1.45
000 interface eth1/eth1 xxx.xxx.xxx.172
000 interface eth1/eth1 xxx.xxx.xxx.172
000 interface eth2/eth2 192.168.1.1
000 interface eth2/eth2 192.168.1.1
000 %myid = (none)
eth1 interface IP is masked, but now ipsec sees all the interfaces and VPN works.
Looks like this bug was introduced by Pull Request #1423
It added code to start ipsec (cloudstack/systemvm/patches/debian/config/opt/cloud/bin/configure.py)
if vpnconfig['create']:
logging.debug("Enabling remote access vpn on "+ public_ip)
CsHelper.start_if_stopped("ipsec")
This change removes an unnecessary conversion from IPNetwork
to list in one of the router scripts. This makes the router
faster at processing static NAT rules, which can prevent
timeouts when attaching or detaching IPs.
(cherry picked from commit d5c5eb10f8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When enabling remote access VPN, a new interface is created upon client connecting via VPN. The DNS service (dnsmasq) is set only to listen on interfaces that are active when it starts. Thus VPN users are provided the VR's IP address for DNS resolution, but it is not actually listening for DNS requests.
Mozilla Firefox displays white tile in place of cursor. The reason - function isImageLoaded() always returns true after first load and function checkUpdate() reloads too fast.
Suggested fix - in refresh() method state imageLoaded should be reverted to false. This ensures that function checkUpdate() processes only when tile image is loaded.
Current SSL protocol and ciphers used in SystemVMs are not the
recommended. To analyze it is possible to use tests such as from SSL
Labs (https://www.ssllabs.com/ssltest/). This commit changes the grade
from C to -A
This enables the firewall/mangle tables rules to ACCEPT instead of RETURN, which
is the same behaviour as observed in ACS 4.5. By accepting the traffic, guest
VMs will be able to communicate tcp traffic between each other over snat public
IPs.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9669:egress destination cidr VR python script changes
CLOUDSTACK-9669:egress destination API and orchestration changes
CLOUDSTACK-9669: Added the ipset package in systemvm template
CLOUDSTACK-9669:Added licence header for new files
CLOUDSTACK-9669: replacing 0.0.0.0/0 with the network cidr
ipset member add with 0.0.0.0/0 fails. So 0.0.0.0/0 replaced with the network cidr.
In source cidr 0.0.0.0/0 is nothing but network cidr.
updated the default egress all cidr with network cidr
* 4.9:
Do not set gateway to 0.0.0.0 for windows clients
CLOUDSTACK-9904: Fix log4j to have @AGENTLOG@ replaced
ignore bogus default gateway when a shared network is secondary the default gateway gets overwritten by a bogus one dnsmasq does the right thing and replaces it with its own default which is not good for us so check for '0.0.0.0'
Activate NioTest following changes in CLOUDSTACK-9348 PR #1549
CLOUDSTACK-9828: GetDomRVersionCommand fails to get the correct version as output Fix tries to return the output as a single command, instead of appending output from two commands
CLOUDSTACK-3223 Exception observed while creating CPVM in VMware Setup with DVS
CLOUDSTACK-9787: Fix wrong return value in NetUtils.isNetworkAWithinNetworkB
- do not keep passwords in databag (/etc/cloudstack/vmpasswd.json)
- process only the password we get in (vm_password.json) from mgt server
- lookup the correct passwd server instead of adding passwd to all of them
Example:
- 4 tiers and 199 VMs running
- Start vm 200 would cause new passwd from vm_password.json (1) to be merged with /etc/cloudstack/vmpasswd.json (199)
- A curl command was exected foreach password (200) foreach tier (4) resulting in 800 calls
- In fact, since passwds are never cleaned it could very well be even more as the ip address was the key in the json file so until the ip address was reused the original password would remain and be sent to passwd server every time another vm starts.
- This took ~40 seconds
Now we just figure out the right tier and only process the new password resulting in a single curl call.
- takes 0,03 seconds!
when a shared network is secondary the default gateway gets overwritten by a bogus one
dnsmasq does the right thing and replaces it with its own default which is not good for us
so check for '0.0.0.0'
- commented some occurences of cloud.com as being harmless
* examples
* identifiers (internal)
- changed the URL for vhd-util download
- changed comments from 'cloud.com' to 'Apache CloudStack'
Fix public IPs not being removed from the VR when deprovisionedThis PR replaces #1706. It does not remove the IP from the database, but it does deprovision the IP correctly from the VR when the public IP is removed.
* pr/1907:
Fix public IPs not being removed from the VR when deprovisioned
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9757: Fixed issue in traffic from additional public subnetAcquire ip from additional public subnet and configure nat on that ip.
After this pick any from that network and access additional public subnet from this vm. Traffic is supposed to go via additional public subnet interface in the VR.
* pr/1922:
CLOUDSTACK-9757: Fixed issue in traffic from additional public subnet
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
* 4.9:
CLOUDSTACK-9746 system-vm: logrotate config causes critical failures
CLOUDSTACK-9788: Fix exception listNetworks with pagesize=0
CLOUDSTACK-8663: Fixed various issues to allow VM snapshots and volume snapshots to exist together
Fix HVM VM restart bug in XenServer
[CLOUDSTACK-9793] Faster IP in subnet checkThis change removes the conversion from IPNetwork to list in one of the router scripts. This makes the router faster at processing static NAT rules, which can prevent timeouts when attaching or detaching IPs.
With the `list` conversion, it has to potentially check a list of 65536 IP strings multiple times. We assume that the comparison implemented in the IPNetwork is far more efficient. We have seen speed-up from 218 seconds to enable static NAT with 18 IPs on the router to 2 or 3 seconds by removing this cast. This also fixes a potential bug where adding IPs to a router time out because the scripts are taking too long. 218 seconds, for example, is beyond the timeout on the KVM agent for script execution, and then all enableStaticNat operations will fail.
* pr/1948:
CLOUDSTACK-9793: Faster ip in subnet check
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
* rotate both daily and by size by using maxsize in stead of size
* decrease the max size to 10M for rsyslog files
* remove delaycompress for rsyslog files
* increase rotate to 10 for cloud.log
This change removes an unnecessary conversion from IPNetwork
to list in one of the router scripts. This makes the router
faster at processing static NAT rules, which can prevent
timeouts when attaching or detaching IPs.
Updated StrongSwan VPN ImplementationThis PR is a merge of @jayapalu changes in #872 and the changes I had to make to get the functionality working.
I have done pretty extensive testing of this code so far and we are looking to be in pretty good shape. One thing to note is that a `Diffie-Hellman` group **is required** in order for this feature to work correctly. It is not highlighted in the tests below, but I have shown that the `PFS` is not required for this feature to work. In #872 I have shown a more exhaustive set of tests of this code, but I have limited this set of tests to a recommended `IKE` and `ESP` configuration in order to reduce the noise and test the other areas of functionality.
**Test Results**
I am testing this functionality by creating two VPCs with VMs in each and creating a S2S VPN connection between the two VPCs. Then I SSH into a VM in one VPC and I ping the private IP of a VM in the other VPC. Then I tear it down and try a different configuration.
_Setup_
```
VPC 1 VPC 2
===== =====
VPN Gateway VPN Gateway
VPN Customer Gateway VPN Customer Gateway
VPN Connection <---> VPN Connection
- Passive = True - Passive = False
```
_Legend_
`SKIP` => At least one of the VPN Connections did not come up, so no test was run.
`OK` => The ping test was successful over the S2S VPN connection.
`FAIL` => The ping test failed over the S2S VPN connection.
`Passive` => Specifies if either the `<vpc_1> : <vpc_2>` sides of the VPN Connection is set to passive.
`Conn State` => Specifies the connection status of the `<vpc_1> : <vpc_2>` VPN Connection in the UI.
`Requires Reset` => If the ping test does not result in an `OK`, then a VPN Connection Reset is performed on either `<vpc_1> : <vpc_2>` sides of the VPN Connection based on which side is not showing `Connected`. The results in the `Status` column is the final result after the reset is performed.
_Results_
```
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| Status | IKE & ESP | DPD | Encap | IKE Life | ESP Life | Passive | Conn State | Requires Reset |
+========+======================+=======+=======+==========+==========+===============+=============================+================+
| OK | aes128-sha1;modp1536 | True | False | 86400 | 3600 | True : False | Disconnected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | True | 86400 | 3600 | True : False | Disconnected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | False | | 3600 | True : False | Disconnected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | False | 86400 | | True : False | Disconnected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | False | | | True : False | Disconnected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | False | 86400 | 3600 | False : False | Connected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | False | 86400 | 3600 | True : True | Disconnected : Disconnected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | True | False | 86400 | 3600 | False : True | Connected : Disconnected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | False | False | 86400 | 3600 | False : False | Connected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | False | False | 86400 | 3600 | True : False | Disconnected : Connected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | False | False | 86400 | 3600 | True : True | Disconnected : Disconnected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| OK | aes128-sha1;modp1536 | False | False | 86400 | 3600 | False : True | Connected : Disconnected | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| SKIP | aes128-sha1 | True | False | 86400 | 3600 | True : False | Disconnected : Error | True : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| SKIP | aes128-sha1 | False | False | 86400 | 3600 | True : False | Disconnected : Error | True : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| FAIL | aes128-sha1 | True | False | 86400 | 3600 | True : True | Disconnected : Disconnected | True : True |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
| SKIP | aes128-sha1 | True | False | 86400 | 3600 | False : False | Connected : Error | False : False |
+--------+----------------------+-------+-------+----------+----------+---------------+-----------------------------+----------------+
```
* pr/1741:
complete implementation of the StrongSwan VPN feature
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
[4.9] CLOUDSTACK-9692: Fix password server issue in redundant VRsThe password server in RVRs has wrong parameters as the gateway of guest nics is None.
In this case, we should get the gateway from /var/cache/cloud/cmdline.
This issue is caused by commit 45642b8382
* pr/1871:
CLOUDSTACK-9692: Fix password server issue in redundant VRs
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
The password server in RVRs has wrong parameters as the gateway of guest nics is None.
In this case, we should get the gateway from /var/cache/cloud/cmdline.
CLOUDSTACK-9615: Fixd applying ingress rules without portsWhen ingress rule is applied without ports (port start and port end params are not passed) then API/UI is showing rule got applied but in the VR, iptables rule not got applied.
Fixed this issue in the VR script.
* pr/1783:
CLOUDSTACK-9615: Fixed applying ingress rules without ports
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
As part of the bug 'CLOUDSTACK-9339 Virtual Routers don't handle Multiple Public Interfaces correctly'
issue of mismatch of traffic type represented by 'nw_type' in config sent by management server in
ip_associations.json and how it is persisted in the ips.json data bag are differnet,
is addressed, however missed the change in final merge.
this bug is to add the functionality in cs_ip.py, to lower the traffic type sent by management server before persisting in the ips.json databag
-when processing static nat rule, add a mangle table rule, to mark the traffic
from the guest vm when it has associated static nat rule so that traffic gets
routed using the route tabe of the device which has public ip associated
-fix the case where nic_device_id is empty when ip is getting disassociated
resulting in empty deviceid in ips.json
-add utility methods in CsRule, and CsRoute to add 'ip rule' and 'ip route' rules respectivley
-ensure traffic from all public interfaces are connection marked with device number, and restored
for the reverse traffic. use the connection marked number to do device specific routing table lookup
fill the device specific routing table with default route
-component tests for testing multiple public interfaces of VR
CLOUDSTACK-9598: wrong defaut gateway for the nic in non-default network when guest VM has nic's in more than one guest network set the tag for each host in /etc/dhcphosts.txt, and use the tag to add exception in /etc/dhcpopts.txt to prevent sending default route, dns server in case if the nic is in non-default network
this was the behaviour with edithosts.sh prior to 4.6
* pr/1766:
CLOUDSTACK-9598: wrong defaut gateway for the nic in non-default network
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit adds a additional VirtIO channel with the name
'org.qemu.guest_agent.0' to all Instances.
With the Qemu Guest Agent the Hypervisor gains more control over the Instance if
these tools are present inside the Instance, for example:
* Power control
* Flushing filesystems
* Fetching Network information
In the future this should allow safer snapshots on KVM since we can instruct the
Instance to flush the filesystems prior to snapshotting the disk.
More information: http://wiki.qemu.org/Features/QAPI/GuestAgent
Keep in mind that on Ubuntu AppArmor still needs to be disabled since the default
AppArmor profile doesn't allow libvirt to write into /var/lib/libvirt/qemu
This commit does not add any communication methods through API-calls, it merely
adds the channel to the Instances and installs the Guest Agent in the SSVMs.
With the addition of the Qemu Guest Agent channel a second channel appears in /dev
on a SSVM as a VirtIO port.
The order in which the ports are defined in the XML matters for the naming inside
the SSVM VM and by not relying on /dev/vportXX but looking for a static name the
SSVM still boots properly if the order in the XML definition is changed.
A SSVM with both ports attached will have something like this:
root@v-215-VM:~# ls -l /dev/virtio-ports
total 0
lrwxrwxrwx 1 root root 11 May 13 21:41 org.qemu.guest_agent.0 -> ../vport0p2
lrwxrwxrwx 1 root root 11 May 13 21:41 v-215-VM.vport -> ../vport0p1
root@v-215-VM:~# ls -l /dev/vport*
crw------- 1 root root 251, 1 May 13 21:41 /dev/vport0p1
crw------- 1 root root 251, 2 May 13 21:41 /dev/vport0p2
root@v-215-VM:~#
In this case the SSVM port points to /dev/vport0p1, but if the order in the XML
is different it might point to /dev/vport0p2
By looking for a portname with a pre-defined pattern in /dev/virtio-ports we
do not rely on the order in the XML definition.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-9498: VR CsFile search utility methods fail when search stThere is no real use of python 're' module in CsFile.py utility methods searchString, deleteLine. Regular string search is sufficient. These methods are used only for VPN user add/delete. Since VPN user password can have python 're' module meta characters, it interfere with search functionality.
Replacing re.search() with regular string search instead.
Change is confined to VPN add/delete users. Have run the test/integration/component/test_vpn_users.py
VPN remote access user limit tests ... === TestName: test_01_VPN_user_limit | Status : SUCCESS ===
ok
Test create VPN when L2TP port in use ... === TestName: test_02_use_vpn_port | Status : SUCCESS ===
ok
Test create NAT rule when VPN when L2TP enabled ... === TestName: test_03_enable_vpn_use_port | Status : SUCCESS ===
ok
Test add new users to existing VPN ... === TestName: test_04_add_new_users | Status : SUCCESS ===
ok
Test add duplicate user to existing VPN ... === TestName: test_05_add_duplicate_user | Status : SUCCESS ===
ok
Test as global admin, add a new VPN user to an existing VPN entry ... === TestName: test_06_add_VPN_user_global_admin | Status : SUCCESS ===
ok
Test as domain admin, add a new VPN user to an existing VPN entry ... === TestName: test_07_add_VPN_user_domain_admin | Status : SUCCESS ===
ok
* pr/1680:
CLOUDSTACK-9498: VR CsFile search utility methods fail when search string has 're' meta chars, and causing VPN user add/deelte to fail
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
when guest VM has nic's in more than one guest network set the tag for
each host in /etc/dhcphosts.txt, and use the tag to add exception in
/etc/dhcpopts.txt to prevent sending default route, dns server in case if the nic is in non-default network
this was the behaviour with edithosts.sh prior to 4.6
added new test case test_router_dhcp_opts to test DHCP option file use of cloudstack
The VR executes a ip route flush command as part of configurations. This command performs a
DNS lookup on the VR hostname. Since the VR does not have a DNS entry, the ip command would
wait 5 seconds before timing out and executing the flush operation. This fix adds the VR
hostname to /etc/hosts mapped to 127.0.0.1 to answer the DNS lookup – reducing the
execution time.
CLOUDSTACK-8326: Always fill UDP checksums in DHCP replies in VRIn some cases the UDP checksums in packets from DHCP servers are
incorrect. This is a problem for some DHCP clients that ignore
packets with bad checksums. This patch inserts an iptables rule
to ensure DHCP servers always send packets with correct checksums.
Due to this bug DHCP offers are sometimes not accepted by Instances.
The end-result without this fix is no connectivity for the Instance
due to the lack of a IPv4 address.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* pr/1743:
CLOUDSTACK-8326: Always fill UDP checksums in DHCP replies in VR
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In some cases the UDP checksums in packets from DHCP servers are
incorrect. This is a problem for some DHCP clients that ignore
packets with bad checksums. This patch inserts an iptables rule
to ensure DHCP servers always send packets with correct checksums.
Due to this bug DHCP offers are sometimes not accepted by Instances.
The end-result without this fix is no connectivity for the Instance
due to the lack of a IPv4 address.
This is also commited in OpenStack:
- https://github.com/projectcalico/felix/issues/40
- https://review.openstack.org/148718
- https://bugzilla.redhat.com/show_bug.cgi?id=910619
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-9183: bash: /opt/cloud/bin/getRouterAlerts.sh: No such file or directory
* pr/1744:
CLOUDSTACK-9183: bash: /opt/cloud/bin/getRouterAlerts.sh: No such file or directory
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
're' meta chars, and causing VPN user add/deelte to fail
-there is no real use of python 're' in CsFile.py utility methods searchString, deleteLine
Replacing with regular string search instead.
-modifying the smoke test for VPN user add/delete to have all permissable chars
resulting in internal LB vm not come up
parsing cmd_line to create 'ips' data bag, never handled internal lb vm, but still
worked due to another bug. support for internal lb vm is added with this fix
CLOUDSTACK-9480, CLOUDSTACK-9495 fix egress rule incorrect behaviorWhen 'default egress policy' is set to 'allow' in the network offering, any egress rule that is added will 'deny' the traffic overriding the default behaviour.
Conversely, when 'default egress policy' is set to 'deny' in the network offering, any egress rule that is added will 'allow' the traffic overriding the default behaviour.
While this works for 'tcp', 'udp' as expected, for 'icmp' protocol its always set to ALLOW. This patch keeps all protocols behaviour consistent.
Results of running test/integration/component/test_egress_fw_rules.py. With out the patch test_02_egress_fr2 test was failing. This patch fixes the test_02_egress_fr2 scenario.
-----------------------------------------------------------------------------------------------------
Test By-default the communication from guest n/w to public n/w is NOT allowed. ... === TestName: test_01_1_egress_fr1 | Status : SUCCESS ===
ok
Test By-default the communication from guest n/w to public n/w is allowed. ... === TestName: test_01_egress_fr1 | Status : SUCCESS ===
ok
Test Allow Communication using Egress rule with CIDR + Port Range + Protocol. ... === TestName: test_02_1_egress_fr2 | Status : SUCCESS ===
ok
Test Allow Communication using Egress rule with CIDR + Port Range + Protocol. ... === TestName: test_02_egress_fr2 | Status : SUCCESS ===
ok
Test Communication blocked with network that is other than specified ... === TestName: test_03_1_egress_fr3 | Status : SUCCESS ===
ok
Test Communication blocked with network that is other than specified ... === TestName: test_03_egress_fr3 | Status : SUCCESS ===
ok
Test Create Egress rule and check the Firewall_Rules DB table ... === TestName: test_04_1_egress_fr4 | Status : SUCCESS ===
ok
Test Create Egress rule and check the Firewall_Rules DB table ... === TestName: test_04_egress_fr4 | Status : SUCCESS ===
ok
Test Create Egress rule and check the IP tables ... SKIP: Skip
Test Create Egress rule and check the IP tables ... SKIP: Skip
Test Create Egress rule without CIDR ... === TestName: test_06_1_egress_fr6 | Status : SUCCESS ===
ok
Test Create Egress rule without CIDR ... === TestName: test_06_egress_fr6 | Status : SUCCESS ===
ok
Test Create Egress rule without End Port ... === TestName: test_07_1_egress_fr7 | Status : EXCEPTION ===
ERROR
Test Create Egress rule without End Port ... === TestName: test_07_egress_fr7 | Status : SUCCESS ===
ok
Test Port Forwarding and Egress Conflict ... SKIP: Skip
Test Port Forwarding and Egress Conflict ... SKIP: Skip
Test Delete Egress rule ... === TestName: test_09_1_egress_fr9 | Status : SUCCESS ===
ok
Test Delete Egress rule ... === TestName: test_09_egress_fr9 | Status : SUCCESS ===
ok
Test Invalid CIDR and Invalid Port ranges ... === TestName: test_10_1_egress_fr10 | Status : SUCCESS ===
ok
Test Invalid CIDR and Invalid Port ranges ... === TestName: test_10_egress_fr10 | Status : SUCCESS ===
ok
Test Regression on Firewall + PF + LB + SNAT ... === TestName: test_11_1_egress_fr11 | Status : SUCCESS ===
ok
Test Regression on Firewall + PF + LB + SNAT ... === TestName: test_11_egress_fr11 | Status : SUCCESS ===
ok
Test Reboot Router ... === TestName: test_12_1_egress_fr12 | Status : SUCCESS ===
ok
Test Reboot Router ... === TestName: test_12_egress_fr12 | Status : EXCEPTION ===
ERROR
Test Redundant Router : Master failover ... === TestName: test_13_1_egress_fr13 | Status : SUCCESS ===
ok
Test Redundant Router : Master failover ... === TestName: test_13_egress_fr13 | Status : SUCCESS ===
ok
-----------------------------------------------------------------------------------------------------
* pr/1666:
fix egress rule incorrect behavior
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9480: Egress Firewall: Incorrect use of Allow/Deny for ICMP
fix ensures, ICMP, TCP, UDP are handled similalry w.r.t egress rule action
CLOUDSTACK-9495: Egress rules functionalty broken when protocol=all specified
when protocol=all specified, CIDR was ignored. Fix ensures if CIDR is specified
its always used in configuring iptable rules
2 new test cased to test /32 CIDR
DNS on VR should not be publically accessible as it may be prone to DNS
amplification/reflection attacks. This fixes the issue by only allowing VR
DNS (port 53) to be accessible from guest network cidr, as per the fix in:
https://issues.apache.org/jira/browse/CLOUDSTACK-6432
- Only allows guest network cidrs to query VR DNS on port 53.
- Includes marvin smoke test that checks the VR DNS accessibility checks from
guest and non-guest network.
- Fixes Marvin sshClient to avoid using ssh agent when password is provided,
previous some environments may have seen 'No existing session' exception without
this fix.
- Adds a new dnspython dependency that is used to perform dns resolutions in the
tests.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Ensure that FW_EGRESS_RULE chain exists after upgrading the router
- Flush allow all egress rule on 0.0.0.0/0, if such a rule exists in the config
it will be added later (CLOUDSTACK-9437)
[CLOUDSTACK-9430] Added fix for adding/editing Network ACL rule orderingBUG: https://issues.apache.org/jira/browse/CLOUDSTACK-9430
The issue occurred because all of the ACL rules get inserted before the old ones. Then, the cleanup deletes the duplicate rows, and leaves any new rule in front of the old ones.
Here is an example with a simplified iptables view for ACL
Ex: adding a rule 4
before add:
1,2,3
during add:
1',2',3',4',1,2,3
after add:
4',1,2,3
After fix:
before add:
1,2,3
during add:
1,2,3,1',2',3',4'
after add:
1',2',3',4'
* pr/1609:
Added fix for adding/editing Network ACL rule ordering
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9342: Site to Site VPN PFS not being set correctlyBug in code set PFS to the same value (yes/no) as DPD.
file.addeq(" pfs=%s" % CsHelper.bool_to_yn(obj['dpd']))
* pr/1480:
CLOUDSTACK-9342: Site to Site VPN PFS not being set correctly
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* Take setup from vhost.template rather than default(-ssl)
* should move into Python CS code as well
* Move CORS setup to separate conf
* Modify vhost template to Optionally include the cors file
* Add NameVirtualHost to vhost template for feature parity with ports.conf
* Take setup from vhost.template rather than default(-ssl)
[CLOUDSTACK-9296] Start ipsec for client VPNThis fix starts the IPSEC daemon when enabling client side vpn
* pr/1423:
[CLOUDSTACK-9296] Start ipsec for client VPN
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Lower the time we wait for interfaces to appearWaiting for interfaces is tricky. They might never appear.. for example when we have entries in `/etc/cloudstack/ips.json` that haven't been plugged yet. Waiting this long makes everything horribly slow (every vm, interface, static route, etc, etc, will hit this wait, for every device). We've seen CloudStack send an `ip_assoc.json` command for `eth1` public nic only and then the router goes crazy waiting for all other interfaces that were there before reboot and aren't there. If only the router would return to the mgt server a success of `eth1`, it would get the command for `eth2` etc etc. Obviously, a destroy works much faster because no state services, so no knowledge of previous devices so no waits :-)
After a stop/start the router has state in `/etc/cloudstack/ips.json` and every commands waits. Eventually hitting the hardcoded 120 sec timeout.
* pr/1471:
lower the time we wait for interfaces to appear
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Add Java Default Certificat Authorities into the keystore if using a custom cert SSL
Related to CLOUDSTACK-1475
* pr/1555:
Add Java Default Certificat Authorities into the keystore if using a custom cert SSL Related to CLOUDSTACK-1475 Fix some english message
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6975: Prevent dnsmasq from starting on backup redundant RvRRebase of PR #1509 against the 4.7 branch as requested by @swill
One LGTM from @ustcweizhou carried from previous PR. Previous PR will be closed.
Description from PR #1509:
CLOUDSTACK-6975 refers to service monitoring bringing up dnsmasq but this is no-longer accurate, as service monitoring is not active on the post-4.6 routers. These routers still suffer an essentially identical issue, however, because "dnsmasq needs to be restarted each time configure.py is called in order to avoid lease problems." As such, dnsmasq is still running on backup RvRs, causing the issues described in CLOUDSTACK-6975.
This PR is based on a patch submitted by @ustcweizhou. The code now checks the redundant state of the router before restarting dnsmasq.
RvR networks without this patch have dnsmasq running on both master and backup routers. RvR networks with this patch have dnsmasq running on only the master router.
* pr/1514:
CLOUDSTACK-6975: Prevent dnsmasq from starting on backup redundant RvR.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
SystemVM cleanupsfrom the logrotate docs
> size - With this, the log file is rotated when the specified size is reached. Size may be specified in bytes (default), kilobytes (sizek), or megabytes (sizem).
> Note: If size and time interval options are specified at same time, only size option take effect. it causes log files to be rotated without regard for the last rotation time. If both log size and timestamp of a log file need to be considered by logrotate, the minsize option should be used. logrotate will rotate log file when they grow bigger than minsize, but not before the additionally specified time interval.
* pr/1414:
systemvm, logrotate: remove daily explicitly as it is ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.7:
Fix Sync of template.properties in Swift
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
Reimplement router.redundant.vrrp.interval settingGlobal setting `router.redundant.vrrp.interval` is not used any more and it is now set to a hardcoded 1.
This results in a failover from master->backup when the backup doesn't hear from the master in ~3.6sec. This is a bit too tight, as we've seen failovers during live migrations. We could reproduce it in about half of the cases. Setting this to setting to 2 (tested it by hardcoding it in the systemvms) gives twice as much time and we didn't see issues any more. Instead of updating the hardcoded setting from 1 to 2, I reimplemented the global setting by sending it to the router with the cmd_line, as the non-VPC router also does.
Background:
Why is the maximum failover time in the example 3.6 seconds? This comes from the advertisement interval and the skew time. The default advertisement interval is 1 second (configurable in keepalived.conf). The skew time helps to keep everyone from trying to transition at once. It is a number between 0 and 1, based on the formula (256 - priority) / 256
As defined in the RFC, the backup must receive an advertisement from the master every (3 * advert_int) + skew_time seconds. If it doesn't hear anything from the master, it takes over. With a backup router priority of 100 (as in the example), the failover will happen at most 3.6 seconds after the master goes down.
Source: http://www.hollenback.net/KeepalivedForNetworkReliability
* pr/1486:
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Restore iptables at once using iptables-restore instead of calling iptables numerous timesThis makes handling the firewall rules about 50-60 times faster because it is generated in memory and then loaded once. It's work by @borisroman see PR #1400. Reopened it here because I think this is a great improvement.
* pr/1482:
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Honour GS use_ext_dns and redundant VR VIPThis patch addresses two issues:
On redundant VR setups, the primary resolver being handed out to instances is the guest_ip (primary IP for the VR). This might lead to problems upon failover, at least while the DHCP lease doesn't update (because the primary resolver will be checked first until times out, however it'll be gone upon failover).
If Global Setting use_ext_dns is true, we don't want the VR to be the primary resolver at all.
* pr/1536:
This patch addresses two issues:
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
* 4.7:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
Handle private gateways more reliablyWhen initialising a VPC router we need to know which IP/device corresponds to a private gateway. This is to solve a problem when stop/starting a VPC router (which gets the private gateway config as a guest network and as a result breaks the functionality). You read it right, the private gateway is sent as type=guest after reboot and type=public initially.
Before this change, you could add a private gw to a running router but you couldn't restart it (it would mix up the tiers). Now the private gateway is detected properly and it works just fine.
Booting without private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.0.42",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "None",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
Booting with private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.2.227",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "10.201.10.1",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
And:
```
cat cmdline
vpccidr=10.0.0.0/24 domain=cs2cloud dns1=8.8.8.8 privategateway=10.201.10.1 template=domP name=r-167-VM eth0ip=169.254.2.227 eth0mask=255.255.0.0 type=vpcrouter disable_rp_filter=true baremetalnotificationsecuritykey=OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w baremetalnotificationapikey=V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw host=192.168.22.61 port=8080
```
Logs:
```
2016-02-24 20:08:45,723 DEBUG [c.c.n.r.VpcVirtualNetworkApplianceManagerImpl] (Work-Job-Executor-4:ctx-458d4c52 job-1402/job-1403 ctx-d5355fca) (logid:5772906c) Set privategateway field in cmd_line.json to 10.201.10.1
```
* pr/1474:
Handle private gateways more reliably
Add private gateway IP to router initialization config
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Apply static routes on change to master stateRefactored static routes for private gateways so they also get loaded when the router switches to master state. Otherwise they're lost and connections drop after fail over.
* pr/1472:
apply static routes on change to master state
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9287 - Fix unique mac address per rVPC routerThis is work by @wilderrodrigues, see PR #1413 It contains important fixes and I think it needs to be included so I send the PR again.
* pr/1483:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Signed-off-by: Will Stevens <williamstevens@gmail.com>
On redundant VR setups, the primary resolver being handed out to instances is the guest_ip (primary IP for the VR). This might lead to problems upon failover, at least while the DHCP lease doesn't update (because the primary resolver will be checked first until times out, however it'll be gone upon failover).
If Global Setting use_ext_dns is true, we don't want the VR to be the primary resolver at all.
CLOUDSTACK-9336 surround the execution of baremetal-vr.py with condition
* pr/1463:
CLOUDSTACK-9336 surround the execution of baremetal-vr.py with condition
Signed-off-by: Will Stevens <williamstevens@gmail.com>
If the size directive is used, logrotate will ignore the daily, weekly, monthly,
and yearly directives.
remove cloud-cleanup
This script does not do anything because it fails due missing /var/log/cloud directory. Logrotate is used for this functionality.
* 4.8:
CLOUDSTACK-9172 Added cross zones check to delete template and iso
Check the existence of 'forceencap' parameter before use
systemvm: set default umask 022 in injectkeys.sh
* 4.7:
CLOUDSTACK-9172 Added cross zones check to delete template and iso
Check the existence of 'forceencap' parameter before use
systemvm: set default umask 022 in injectkeys.sh
Check the existence of 'forceencap' parameter before useCheck the existence of 'forceencap' parameter before use.
Error seen:
```
Traceback (most recent call last):
File "/opt/cloud/bin/update_config.py", line 140, in <module>
process_file()
File "/opt/cloud/bin/update_config.py", line 54, in process_file
finish_config()
File "/opt/cloud/bin/update_config.py", line 44, in finish_config
returncode = configure.main(sys.argv)
File "/opt/cloud/bin/configure.py", line 1003, in main
vpns.process()
File "/opt/cloud/bin/configure.py", line 488, in process
self.configure_ipsec(self.dbag[vpn])
File "/opt/cloud/bin/configure.py", line 544, in configure_ipsec
file.addeq(" forceencaps=%s" % CsHelper.bool_to_yn(obj['encap']))
KeyError: 'encap'
```
* pr/1402:
Check the existence of 'forceencap' parameter before use
Signed-off-by: Will Stevens <williamstevens@gmail.com>
They might never appear.. for example when we have entries in
/etc/cloudstack/ips.json that haven't been plugged yet. Waiting
this long makes everything horribly slow (every vm, interface,
static route, etc, etc, will hit this wait, for every device).
* 4.8:
Display hostname the VPC router runs on
CLOUDSTACK-9266: Make deleting static routes in private gw work
CLOUDSTACK-9264: Make /32 static routes for private gw work
* 4.7:
Display hostname the VPC router runs on
CLOUDSTACK-9266: Make deleting static routes in private gw work
CLOUDSTACK-9264: Make /32 static routes for private gw work
CLOUDSTACK-9256 add unique key for static routes in jsonStatic routes that are being set do not show up in the static_routes.json file. The reason for this is that the index that is used, is the gateway address, which is not unique. Hence stuff is overwritten and lost.
Ping @borisroman @wilderrodrigues @DaanHoogland
* pr/1364:
CLOUDSTACK-9256 add unique key for static routes in json
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9254: Make longer names display pretty
CLOUDSTACK-9245 - Deletes ACL items when destroying the VPC or deleting the ACL itself
CLOUDSTACK-9245 - Formatting NetworkACLServiceImpl class
CLOUDSTACK-9245 - Formatting VpcManagerImpl class
CLOUDSTACK-9245 - Formatting NetworkACLManagerImpl class
More VR performance!
* 4.7:
Refactor public ip retrieval into method
CLOUDSTACK-9244 Fix setting up RFC1918 routes
CLOUDSTACK-9239 throw exception on deprecated command
Enhance VR performance by selectively executing tasks instead of brute-forcing
CLOUDSTACK-9236: Load Balancing Health Check button displayed when non-NetScaler offering is used
* 4.7:
CLOUDSTACK-9154 - Sets the pub interface down when all guest nets are gone
CLOUDSTACK-9187 - Makes code ready for more something like ethXXXX, if we ever get that far
CLOUDSTACK-9188 - Reads network GC interval and wait from configDao
CLOUDSTACK-9187 - Fixes interface allocation to VRRP instances
CLOUDSTACK-9187 - Adds test to cover multiple nics and nic removal
CLOUDSTACK-9154 - Adds test to cover nics state after GC
CLOUDSTACK-9154 - Returns the guest iterface that is marked as added
Conflicts:
engine/orchestration/src/org/apache/cloudstack/engine/orchestration/NetworkOrchestrator.java
[4.7] Critical VPCVR issues fixed: CLOUDSTACK-9154; CLOUDSTACK-9187; and CLOUDSTACK-9188This PR applies the same fixes as in the PR #1259, but against branch 4.7.
Please refer to PR #1259 for the tests results and all the comments already made there.
Issues fixed are:
* CLOUDSTACK-9154: rVPC doesn't recover from cleaning up of network garbage collector
* CLOUDSTACK-9187: rVPC routers in Master/Master due to concurrency problem when writing the keepalivd.conf
* CLOUDSTACK-9188: NetworkGarbageCollector is not using gc.interval and gc.wait from settings
Those changes have been covered by 2 new tests added to ```smoke/test_vpc_redundant.py```:
* test_04_rvpc_network_garbage_collector_nics
* test_05_rvpc_multi_tiers
The test ```test_04_rvpc_network_garbage_collector_nics``` depends on the global settings for the network.gc.interval and gc.wait. If one wants the test to run quicker, please change the settings (default is 600 seconds for each) and restart the Management Server before running the tests. I would suggest to set it to 60 seconds.
In addition, the NetworkGarbageCollector was redefining the settings above mentioned and not reading their values through ConfigDao. Due to that, the settings were not being applied properly and the test was waiting to long to check the VPC routers.
* pr/1277:
CLOUDSTACK-9154 - Sets the pub interface down when all guest nets are gone
CLOUDSTACK-9187 - Makes code ready for more something like ethXXXX, if we ever get that far
CLOUDSTACK-9188 - Reads network GC interval and wait from configDao
CLOUDSTACK-9187 - Fixes interface allocation to VRRP instances
CLOUDSTACK-9187 - Adds test to cover multiple nics and nic removal
CLOUDSTACK-9154 - Adds test to cover nics state after GC
CLOUDSTACK-9154 - Returns the guest iterface that is marked as added
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9222 Prevent cloud.log.1 filling up the disk
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
ustcweizhou
Paul Angus
Rohit Yadav
Anurag Awasthi
Richard Lawley
Nicolas Vazquez
GabrielBrascher
Rohit Yadav
René Moser
David Passante
Luiz Henrique
Mike Tutkowski
Rene Diepstraten
Khosrow Moossavi
Dingane Hlaluku
Paul Angus
Slair1
Rafael Weingärtner
Daan Hoogland
Marc-Aurèle Brothier
Wido den Hollander
Frank Maximus
Bitworks Software, Ltd
Remi Bergsma
Igor Voloshanenko
Jayapal
subhash yedugundla
vedulasantosh
Rohit Yadav
Syed Mushtaq Ahmed
Nitesh Sarda
Jayapal
Will Stevens
Stefania
Tomas Lygutas
gabrascher
Rajani Karuturi
Sigert Goeminne
Rajani Karuturi
Ronald van Zantvoort
Rajani Karuturi
Daan Hoogland
Harikrishna Patnala
Abhinandan Prateek
David Mabry
Joakim Sernbrant
Wei Zhou
Wei Zhou
Jayapalu
Murali Reddy
Ólafur Stefán Arnarsson
John Burwell
Patrick Dube
Milamber
dean.close
Nuno Tavares
Rene Moser
Anshul Gangwar
kollyma
Wilder Rodrigues
Boris Schrijver
