The KVM Agent had two mechanisms for reporting its capabilities
and memory to the Management Server.
On startup it would ask libvirt the amount of Memory the Host has
and subtract and add the reserved and overcommit memory.
When the HostStats were however reported to the Management Server
these two configured values on the Agent were no longer reported
in the statistics thus showing all the available memory in the
Agent/Host to the Management Server.
This commit unifies this by using the same logic on Agent Startup
and during statistics reporting.
memory=3069636608, reservedMemory=1073741824
This was reported by a 4GB Hypervisor with this setting:
host.reserved.mem.mb=1024
The GUI (thus API) would then show:
Memory Total 2.86 GB
This way the Agent properly 'lies' to the Management Server about its
capabilities in terms of Memory.
This is very helpful if you want to overprovision or undercommit machines
for various reasons.
Overcommitting can be done when KSM or ZSwap or a fast SWAP device is
installed in the machine.
Underprovisioning is done when the Host might run other tasks then a KVM
hypervisor, for example when it runs in a hyperconverged setup with Ceph.
In addition internally many values have been changed from a Double to a Long
and also store the amount of bytes instead of Kilobytes.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Replace deprecated optparse by argparse
Starting with Python 2.7 the library optparse has been replaced by
argpase.
This commit replaces the use of optparse by argparse
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Remove LXC support from security_group.py
LXC does not work and has been partially removed from CloudStack already
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Refactor libvirt code
Use a single function which properly throws an Exception when the
connection to libvirt fails.
Also simplify some logic, make it PEP-8 compatible and remove a unused
function from the code.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Raise Exception on execute() failure
If the executed command exists with a non-zero exit status we should
still return the output to the command, but also raise an Exception.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Use a function to determin the physical device of a bridge
We can not safely assume that the first device listed under a bridge is the
physical device.
With VXLAN isolation a vnet device can be attached to a bridge prior to the
vxlanXXXX device being attached.
We need to filter out those devices and then fetch the physical device attached
to the bridge.
In addition use the 'bridge' command instead of 'brctl'. 'bridge' is part of the
iproute2 utils just like 'ip' and should be considered as the new default.
This command is also available on EL6 and does not break any backwards compat.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: --set is deprecated, use --match-set
These messages are seen in the KVM Agent log:
--set option deprecated, please use --match-set
Functionality does not change
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: PEP-8 and indentation fixes
There were a lot of styling problems in the code:
- Missing whitespace or exess whitespace
- CaMelCaSe function names and variables
- 2-space indentation instead of 4 spaces
This commit addresses those issues.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The additional queues can enhance the performance of the VirtIO SCSI disk
and it is recommended to set this to the amount of vCPUs a Instance is assigned.
The optional queues attribute specifies the number of queues for the
controller. For best performance, it's recommended to specify a value matching
the number of vCPUs. Since 1.0.5 (QEMU and KVM only)
Source: https://libvirt.org/formatdomain.html#elementsVirtio
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The static method syncVolumeToRootFolder() from VmwareStorageLayoutHelper.java:146 has been incorrectly called and leads to an infinite recursive call that ends up in a StackOverflowError. This PR fixes this.
public static void syncVolumeToRootFolder(DatacenterMO dcMo, DatastoreMO ds, String vmdkName, String vmName) throws Exception { syncVolumeToRootFolder(dcMo, ds, vmdkName, null); } -> public static void syncVolumeToRootFolder(DatacenterMO dcMo, DatastoreMO ds, String vmdkName, String vmName) throws Exception { syncVolumeToRootFolder(dcMo, ds, vmdkName, vmName, null); }
* Allow KVM VM live migration with ROOT volume on file
* Allow KVM VM live migration with ROOT volume on file
- Add JUnit tests
* Address reviewers and change some variable names to ease future
implementation (developers can easily guess the name and use
autocomplete)
Users reported that they weren't getting all apis listed in cloudmonkey when running a sync. After some debugging, I found that the problem is that the ApiDiscoveryService is calling ApiRateLimitServiceImpl.checkAccess(), so the results of the listApis command are being truncated because Cloudstack believes the user has exceeded their API throttling rate.
I enabled throttling with a 25 request per second limit. I then created a test role with only list* permissions and assigned it to a test user. When this user calls listApis, they will typically receive anywhere from 15-18 results. Checking the logs, you see The given user has reached his/her account api limit, please retry after 218 ms..
I raised the limit to 200 requests per second, restarted the management server and tried again. This time I got 143 results and no log messages about the user being throttled.
Added dummy and lo devices to be treated as a normal bridge slave devs.
Fixes#2998
Added two more device names (lo* and dummy*). Implemented tests. Code was refactored.
Improved paths concatenation code from "+" to Paths.get.
If a host has many routes this can be a magnitude faster then printing
all the routes and grepping for the default.
In some situations the host might have a large amount of routes due to
dynamic routing being used like OSPF or BGP.
In addition fix a couple of loglines which were throwing messages on
DEBUG while WARN and ERROR should be used there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When vxlan://untagged is used for public (or guest) network, use the
default public/guest bridge device same as how vlan://untagged works.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These additional RBD features allow for faster lookups of how much space a RBD
image is using, but with the exclusive locking we prevent two VMs from writing
to the same RBD image at the same time.
These are the default features used by Ceph for any new RBD image.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This adds a new API updateVmwareDc that allows admins to update the
VMware datacenter details of a zone. It also recursively updates
the cluster_details for any username/password updates
as well as updates the url detail in cluster_details table and guid
detail in the host_details table with any newly provided vcenter
domain/ip. The update API assumes that there is only one vCenter per
zone. And, since the username/password for each VMware host could be different
than what gets configured for vcenter at zone level, it does not update the
username/password in host_details.
Previously, one has to manually update the db with any new vcenter details for the zone.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On actual testing, I could see that kvmheartbeat.sh script fails on NFS
server failure and stops the agent only. Any HA VMs could be launched
in different hosts, and recovery of NFS server could lead to a state
where a HA enabled VM runs on two hosts and can potentially cause
disk corruptions. In most cases, VM disk corruption will be worse than
VM downtime. I've kept the sleep interval between check/rounds but
reduced it to 10s. The change in behaviour was introduced in #2722.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Prevents errors while migrating VM from ISO:
Test 1: Deploy VM from ISO -> Live migrate VM to another host -> ERROR
Test 2: Register ISO using Direct Download on KVM -> Deploy VM from ISO -> Live migrate VM to another host -> ERROR
- Prevent NullPointerException migrating VM from ISO
- Prevent mount secondary storage on ISO direct downloads on KVM
Since we support only Ubuntu 16.04+ on master/4.12+, we can now use
the libvirt service name `libvirtd` for all distributions. This also
fixes an optional package name for libvirtd installation on Debian 9+.
Fixes#2909
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When a user fails to authenticate with SAML2, it returns an error page
showing the content of the attached image.
To make it more user-friendly and customizable, one could configure a
desirable URL to redirect when such authentication failure happens.
This ticket proposes a global settings variable
(saml2.failed.login.redirect.url). If null, the SAML2 authentication
flow does not change from the current; however, if the user configures
an URL then ACS redirects to that URL.
Windows has support for several paravirt features that it will use when running on Hyper-V, Microsoft's hypervisor. These features are called enlightenments. Many of the features are similar to paravirt functionality that exists with Linux on KVM (virtio, kvmclock, PV EOI, etc.)
Nowadays QEMU/KVM can also enable support for several Hyper-V enlightenments. When enabled, Windows VMs running on KVM will use many of the same paravirt optimizations they would use when running on Hyper-V.
A number of years ago, a PR was introduced that added a good portion of the code to enable this feature set, but it was never completed. This PR enables the existing features. The previous patch set detailed in #1013 also included the tests.
By selecting Windows PV, the enlightenment additions will be applied to the libvirt configuration. This is support on Windows Server 2008 and beyond, so all currently supported versions of Windows Server.
In our testing, we've seen benchmark improvements of around 20-25% running on Centos 7 hosts and it is also supported on Centos/RHEL 6.5 and later. Testing on Ubuntu would be appreciated.
This tries to provide a threshold based fix for #2873 where swappinness of VR is not used until last resort. By limiting swappiness unless actually needed, the VR system degradation can be avoided for most cases. The other change is around not starting baremetal-vr by default on all VRs, according to the spec https://cwiki.apache.org/confluence/display/CLOUDSTACK/Baremetal+Advanced+Networking+Support only vmware VRs need to run it and that too only as the last step of the setup/completion, so we don't need to run it all the time.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes the default RootCA provider implementation to initiate
and issue certificate for mgmt server on startup for all the IP addresses
on the default nic of that host.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These boolean-return methods are named as "getXXX".
Other boolean-return methods are named as "isXXX".
Considering there methods will return boolean values, it should be more clear and consistent to rename them as "isXXX".
(rebase #2602 and #2816)
[VMware] VM is not accessible after migration across clusters.
Once a VM is successfully started, don't delete the files associated with the unregistered VM, if the files are in a storage that is being used by the new VM.
Attempt to unregister a VM in another DC, only if there is a host associated with a VM.
This closes#556
When a Instance is (attempted to be) started in KVM Host the Agent
should not worry about the allocated memory on this host.
To make a proper judgement we need to take more into account:
- Memory Overcommit ratio
- Host reserved memory
- Host overcommit memory
The Management Server has all the information and the DeploymentPlanner
has to make the decision if a Instance should and can be started on a
Host, not the host itself.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This fixes#2763 by moving a post cert-renewal class for kvm
plugin/hypervisor to src/main/java. The regression is due to change
in file-system layout due to maven standard refactoring on master and
issue was not caught during forward-merging of a PR from 4.11 branch.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
This is a new feature for CS that allows Admin users improved
troubleshooting of network issues in CloudStack hosted networks.
Description: For troubleshooting purposes, CloudStack administrators may wish to execute network utility commands remotely on system VMs, or request system VMs to ping/traceroute/arping to specific addresses over specific interfaces. An API command to provide such functionalities is being developed without altering any existing APIs. The targeted system VMs for this feature are the Virtual Router (VR), Secondary Storage VM (SSVM) and the Console Proxy VM (CPVM).
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+Remote+Diagnostics+API
ML discussion:
https://markmail.org/message/xt7owmb2c6iw7tva
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
This ensure that fewer mount points are made on hosts for either
primary storagepools or secondary storagepools.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.11:
comment on unencryption
ui: fix create VPC dialog box failure when zone is SG enabled (#2704)
CLOUDSTACK-10381: Fix password reset / reset ssh key with ConfigDrive
isisnot=
extra message
debug message
imports
update without decrypt doesn't work
set unsensitive attributes as not 'Secure'
remove old config artifacts from update path
Now the KVM agent checks whether a storage pool is mounted or not mounted before calling storagePoolCreateXML().
Signed-off-by: Kai Takahashi <k-takahashi@creationline.com>
Changes in PR #2508 have caused network restart to fail in a Nuage setup,
as the new VR takes the same IP as the old one, and the old VR is still running.
Nuage doesn't support multiple VM's having the same IP.
We delay provisioning the interfaces in VSD until the old VR interface is released.
This introduces a new global setting `vm.configdrive.primarypool.enabled` to toggle creation/hosting of config drive iso files on primary storage, the default will be false causing them to be hosted on secondary storage. The current support is limited from hypervisor resource side and in current implementation limited to `KVM` only. The next big change is that config drive is created at a temporary location by management server and shipped to either KVM or SSVM agent via cmd-answer pattern, the data of which is not logged in logs. This saves us from adding genisoimage dependency on cloudstack-agent pkg.
The APIs to reset ssh public key, password and user-data (via update VM API) requires that VM should be shutdown. Therefore, in the refactoring I removed the case of updation of existing ISO. If there are objections I'll re-put the strategy to detach+attach new config iso as a way of updation. In the refactored implementation, the folder name is changed to lower-cased configdrive. And during VM start, migration or shutdown/removal if primary storage is enable for use, the KVM agent will handle cleanup tasks otherwise SSVM agent will handle them.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In 4.11.0, I added the ability to online migrate volumes from NFS to managed storage. This actually works for Ceph to managed storage in a private 4.8 branch, as well. I thought I had brought along all of the necessary code from that private 4.8 branch to make Ceph to managed storage functional in 4.11.0, but missed one piece (which is fixed by this PR).
* CLOUDSTACK-9184: Fixes#2631 VMware dvs portgroup autogrowth
This deprecates the vmware.ports.per.dvportgroup global setting.
The vSphere Auto Expand feature (introduced in vSphere 5.0) will take
care of dynamically increasing/decreasing the dvPorts when running out
of distributed ports . But in case of vSphere 4.1/4.0 (If used), as this
feature is not there, the new default value (=> 8) have an impact in the
existing deployments. Action item for vSphere 4.1/4.0: Admin should
modify the global configuration setting "vmware.ports.per.dvportgroup"
from 8 to any number based on their environment because the proposal
default value of 8 would be very less without auto expand feature in
general. The current default value of 256 may not need immediate
modification after deployment, but 8 would be very less which means
admin need to update immediately after upgrade.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These Boolean-return methods are named "getXXX", but other Boolean-return methods are named "isXXX", such as the following two methods. They will return boolean values, rename them as "isXXX" should be more clear than "getXXX".
* CLOUDSTACK-10147 Disabled Xenserver Cluster can still deploy VM's. Added code to skip disabled clusters when selecting a host (#2442)
(cherry picked from commit c3488a51db)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10318: Bug on sorting ACL rules list in chrome (#2478)
(cherry picked from commit 4412563f19)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10284:Creating a snapshot from VM Snapshot generates error if hypervisor is not KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10221: Allow IPv6 when creating a Basic Network (#2397)
Since CloudStack 4.10 Basic Networking supports IPv6 and thus
should be allowed to be specified when creating a network.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit 9733a10ecd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10214: Unable to remove local primary storage (#2390)
Allow admins to remove primary storage pool.
Cherry-picked from eba2e1d8a1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dateutil: constistency of tzdate input and output (#2392)
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
Signed-off-by: Daan Hoogland <daan.hoogland@shapeblue.com>
(cherry picked from commit 2ad5202823)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10054:Volume download times out in 3600 seconds (#2244)
(cherry picked from commit bb607d07a9)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* When creating a new account (via domain admin) it is possible to select “root admin” as the role for the new user (#2606)
* create account with domain admin showing 'root admin' role
Domain admins should not be able to assign the role of root admin to new users. Therefore, the role ‘root admin’ (or any other of the same type) should not be visible to domain admins.
* License and formatting
* Break long sentence into multiple lines
* Fix wording of method 'getCurrentAccount'
* fix typo in variable name
* [CLOUDSTACK-10259] Missing float part of secondary storage data in listAccounts
* [CLOUDSTACK-9338] ACS not accounting resources of VMs with custom service offering
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
* [CLOUDSTACK-10230] User should not be able to use removed “Guest OS type” (#2404)
* [CLOUDSTACK-10230] User is able to change to “Guest OS type” that has been removed
Users are able to change the OS type of VMs to “Guest OS type” that has been removed. This becomes a security issue when we try to force users to use HVM VMs (Meltdown/Spectre thing). A removed “guest os type” should not be usable by any users in the cloud.
* Remove trailing lines that are breaking build due to checkstyle compliance
* Remove unused imports
* fix classes that were in the wrong folder structure
* Updates to capacity management
This adds and allows Ubuntu 18.04 to be used as KVM host. In addition,
on the UI when hypervisor version key is missing, this adds and display
the host os and version detail which is useful to show the KVM host
os and version.
When cache mode 'none' is used for empty cdrom drives, systemvms
and guest VMs fail to start on newer libvirtd such as Ubuntu bionic.
The fix is ensure that cachemode is not declared when drives are empty
upon starting of the VM. Similar issue logged at redhat here:
https://bugzilla.redhat.com/show_bug.cgi?id=1342999
The workaround is to ensure that we don't configure cachemode for
cdrom devices at all. This also fixes live VM migration issue.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes SAML2 certificate encoding/decoding issue due to refactoring
regression introduced in 7ce54bf7a8 that
did not account for base64 based encoding/decoding. The changes
effectively restore the same logic as used in previous versions.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ensures that certificate setup includes all the IP addresses (v4
and v6) when a (KVM) host is added to CloudStack. This fixes#2530.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* [CLOUDSTACK-5235] Force users to enter old password when updating password
* Formatting for checkstyle
* Remove an unused import in AccountManagerImpl
* Apply Nitin's suggestions
* Change 'oldPassword' to 'currentPassword'
* Second review of Resmo
* Fix typos found by Nitin
The three methods are named as "setXXX", actually, they are not simple setter or getter.
They are further renamed as "generateXXX" with dahn's comments.
These three methods are not direct getter or list.
They try to find the target objects with the related arguments.
So that, renaming them as "findXXX" should be more intuitive.
This adds support for XenServer 7.3 and 7.4, and XCP-ng 7.4 version as hypervisor hosts. Fixes#2523.
This also fixes the issue of 4.11 VRs stuck in starting for up-to 10mins, before they come up online.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
CloudStack SSO (using security.singlesignon.key) does not work anymore with CloudStack 4.11, since commit 9988c26, which introduced a regression due to a refactoring: every API request that is not "validated" generates the same error (401 - Unauthorized) and invalidates the session.
However, CloudStack UI executes a call to listConfigurations in method bypassLoginCheck. A non-admin user does not have the permissions to execute this request, which causes an error 401:
{"listconfigurationsresponse":{"uuidList":[],"errorcode":401,"errortext":"unable to verify user credentials and/or request signature"}}
The session (already created by SSO) is then invalidated and the user cannot access to CloudStack UI (error "Session Expired").
Before 9988c26 (up to CloudStack 4.10), an error 432 was returned (and ignored):
{"errorresponse":{"uuidList":[],"errorcode":432,"cserrorcode":9999,"errortext":"The user is not allowed to request the API command or the API command does not exist"}}
Even if the call to listConfigurations was removed, another call to listIdps also lead to an error 401 for user accounts if the SAML plugin is not enabled.
This pull request aims to fix the SSO issue, by restoring errors 432 (instead of 401 + invalidate session) for commands not available. However, if an API command is explicitly denied using ACLs or if the session key is incorrect, it still generates an error 401 and invalidates the session.
This extends securing of KVM hosts to securing of libvirt on KVM
host as well for TLS enabled live VM migration. To simplify implementation
securing of host implies that both host and libvirtd processes are
secured with management server's CA plugin issued certificates.
Based on whether keystore and certificates files are available at
/etc/cloudstack/agent, the KVM agent determines whether to use TLS or
TCP based uris for live VM migration. It is also enforced that a secured
host will allow live VM migration to/from other secured host, and an
unsecured hosts will allow live VM migration to/from other unsecured
host only.
Post upgrade the KVM agent on startup will expose its security state
(secured detail is sent as true or false) to the managements server that
gets saved in host_details for the host. This host detail can be accesed
via the listHosts response, and in the UI unsecured KVM hosts will show
up with the host state of ‘unsecured’. Further, a button has been added
that allows admins to provision/renew certificates to KVM hosts and can
be used to secure any unsecured KVM host.
The `cloudstack-setup-agent` was modified to accept a new flag `-s`
which will reconfigure libvirtd with following settings:
listen_tcp=0
listen_tls=1
tcp_port="16509"
tls_port="16514"
auth_tcp="none"
auth_tls="none"
key_file = "/etc/pki/libvirt/private/serverkey.pem"
cert_file = "/etc/pki/libvirt/servercert.pem"
ca_file = "/etc/pki/CA/cacert.pem"
For a connected KVM host agent, when the certificate are
renewed/provisioned a background task is scheduled that waits until all
of the agent tasks finish after which libvirt process is restarted and
finally the agent is restarted via AgentShell.
There are no API or DB changes.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Add stack traces information
* update stack trace info
* update stack trace to make them consistent
* update stack traces
* update stacktraces
* update stacktraces for other similar situations
* fix some other situations
* enhance other situations
* [CLOUDSTACK-10226] CloudStack is not importing Local storage properly
CloudStack is importing as Local storage any XenServer SR that is of type LVM or EXT. This causes a problem when one wants to use both Direct attach storage and local storage. Moreover, CloudStack was not importing all of the local storage that a host has available when local storage is enabled. It was only importing the First SR it sees.
To fix the first problem we started ignoring SRs that have the flag shared=true when discovering local storages. SRs configured to be shared are used as direct attached storage, and therefore should not be imported again as local ones.
To fix the second problem, we started loading all Local storage and importing them accordingly to ACS.
* Cleanups and formatting
* translate groovy test for ADLdapUserManagerImpl to java
* fixed by returning the actual result instead of false
* unit test case for manual mapped user in ldap
* [CLOUDSTACK-10241] Duplicated file SRs being created in XenServer pools
Due to a race condition between multiple management servers, in some rare cases, CloudStack is creating multiple file SRs to the same secondary folder. This causes a problem when introducing the SR to the XenServer pools, as “there will be VDIs with duplicated UUIDs“. The VDIs are the same, but they are seen in different SRs, and therefore cause an error.
The solution to avoid race conditions between management servers is to use a deterministic srUuid for the file SR to be created (we are leaving XenServer with the burden of managing race conditions). The UUID is based on the SR file path and is generated using UUID#nameUUIDFromBytes. Therefore, if there is an SR with the generated UUID, this means that some other management server has just created it. An exception will occur and it will contain a message saying 'Db_exn.Uniqueness_constraint_violation'. In these unlikely events, we catch the exception and use the method retrieveAlreadyConfiguredSrWithoutException to get the SR that has already been created for the given mount point.
Several fixes addressed:
- Dettach ISO fails when trying to detach a direct download ISO
- Fix for metalink support on SSVM agents (this closes CLOUDSTACK-10238)
- Reinstall VM from bypassed registered template (this closes CLOUDSTACK-10250)
- Fix upload certificate error message even though operation was successful
- Fix metalink download, checksum retry logic and metalink SSVM downloader
The new CA framework introduced basic support for comma-separated
list of management servers for agent, which makes an external LB
unnecessary.
This extends that feature to implement LB sorting algorithms that
sorts the management server list before they are sent to the agents.
This adds a central intelligence in the management server and adds
additional enhancements to Agent class to be algorithm aware and
have a background mechanism to check/fallback to preferred management
server (assumed as the first in the list). This is support for any
indirect agent such as the KVM, CPVM and SSVM agent, and would
provide support for management server host migration during upgrade
(when instead of in-place, new hosts are used to setup new mgmt server).
This FR introduces two new global settings:
- `indirect.agent.lb.algorithm`: The algorithm for the indirect agent LB.
- `indirect.agent.lb.check.interval`: The preferred host check interval
for the agent's background task that checks and switches to agent's
preferred host.
The indirect.agent.lb.algorithm supports following algorithm options:
- static: use the list as provided.
- roundrobin: evenly spreads hosts across management servers based on
host's id.
- shuffle: (pseudo) randomly sorts the list (not recommended for production).
Any changes to the global settings - `indirect.agent.lb.algorithm` and
`host` does not require restarting of the mangement server(s) and the
agents. A message bus based system dynamically reacts to change in these
global settings and propagates them to all connected agents.
Comma-separated management server list is propagated to agents on
following cases:
- Addition of a host (including ssvm, cpvm systevms).
- Connection or reconnection by the agents to a management server.
- After admin changes the 'host' and/or the
'indirect.agent.lb.algorithm' global settings.
On the agent side, the 'host' setting is saved in its properties file as:
`host=<comma separated addresses>@<algorithm name>`.
First the agent connects to the management server and sends its current
management server list, which is compared by the management server and
in case of failure a new/update list is sent for the agent to persist.
From the agent's perspective, the first address in the propagated list
will be considered the preferred host. A new background task can be
activated by configuring the `indirect.agent.lb.check.interval` which is
a cluster level global setting from CloudStack and admins can also
override this by configuring the 'host.lb.check.interval' in the
`agent.properties` file.
Every time agent gets a ms-host list and the algorithm, the host specific
background check interval is also sent and it dynamically reconfigures
the background task without need to restart agents.
Note: The 'static' and 'roundrobin' algorithms, strictly checks for the
order as expected by them, however, the 'shuffle' algorithm just checks
for content and not the order of the comma separate ms host addresses.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-8855 Improve Error Message for Host Alert State
* [CLOUDSTACK-9846] create column to save the content of alert messages
Remove declaration of throws CloudRuntimeException
I also removed some unused variables and comments left behind
This closes#837
* Isolate a problematic test "smoke/test_certauthority_root"
* Refactored nuage tests
Added simulator support for ConfigDrive
Allow all nuage tests to run against simulator
Refactored nuage tests to remove code duplication
* Move test data from test_data.py to nuage_test_data.py
Nuage test data is now contained in nuage_test_data.py instead of
test_data.py
Removed all nuage test data from nuage_test_data.py
* CLOUD-1252 fixed cleanup of vpc tier network
* Import libVSD into the codebase
* CLOUDSTACK-1253: Volumes are not expunged in simulator
* Fixed some merge issues in test_nuage_vsp_mngd_subnets test
* Implement GetVolumeStatsCommand in Simulator
* Add vspk as marvin nuagevsp dependency, after removing libVSD dependency
* correct libVSD files for license purposes
pep8 pyflakes compliant
This deprecates and remove TLS 1.0 and 1.1 from preferred list of
protocols and keeps only TLSv1.2.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Update the displayText of XenServer ISO when it already exist in the DB
Besides updating the ISO display text, I also created unit test cases for 'createXenServerToolsIsoEntryInDatabase' and 'getActualIsoTemplate' methods.
* Formatting and cleanups for checkstyle of changed classes
L2 network refused to be designed on VXLAN physical network. Add fix for vxlan issue.
Add condition for L2 networks which do not allow specifying vlan.
* 4.11:
CLOUDSTACK-10306: Upgrade to VMware 6.5 vim jar dependency (#2467)
CLOUDSTACK-10298: fix for recreation of an earlier deleted Nuage managed network (#2460)
There is a race condition in the monitoring of the migration process on KVM. If the monitor wakes up in the tight window after the migration succeeds, but before the migration thread terminates, the monitor will get a LibvirtException “Domain not found: no domain with matching uuid” when checking on the migration status. This in turn causes CloudStack to sync the VM state to stop, in which it issues a defensive StopCommand to ensure it is correctly synced.
Fix: Prevent LibvirtException: "Domain not found" caused by the call to dm.getInfo()
CLOUDSTACK-10269: On deletion of role set name to null (#2444)
CLOUDSTACK-10146 checksum in java instead of script (#2405)
CLOUDSTACK-10222: Clean snaphosts from primary storage when taking (#2398)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When user creates a snapshot (manual or recurring), snapshot remains on
the primary storage, even if the snapshot is transferred successfully to
secondary storage. This is causing issues because XenServer can only hold
a limited number of snapshots in its VDI chain, preventing the user from
creating new snapshots after some time, when too many old snapshots are
present on the primary storage.
Automate dynamic roles migration for missing props file
- In case commands.properties file is missing, enables dynamic roles.
- Adds a new -D or --default flag to migrate-dynamicroles.py script
to simply update the global setting and use the default role-rule
permissions.
- Add warning message, ask admins to move to dynamic roles during upgrade
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes move refactoring error introduced in #2283
For instance, the class DatadiskTO is supposed to be in com.cloud.agent.api.to package. However, the folder structure it was placed in is com.cloud.agent.api.api.to.
Skip tests for cloud-plugin-hypervisor-ovm3:
For some unknown reason, there are quite a lot of broken test cases for cloud-plugin-hypervisor-ovm3. They might have appeared after some dependency upgrade and was overlooked by the person updating them. I checked them to see if they could be fixed, but these tests are not developed in a clear and clean manner. On top of that, we do not see (at least I) people using OVM3-hypervisor with ACS. Therefore, I decided to skip them.
Identention corrected to use spaces instead of tabs in XML files
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
The documentation of Libvirt specifies the requirement of using an XML namespace,
when having metadata in the Domain XML. The Nuage extenstion metadata was not
adhering to this specification, and the lastest Libvirt version ignores it in that case.
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes regression introduced in PR #2295:
- Pass assign=true to fetch new public IP
- Use wait_until instead of sleep+wait in tests
- Loop through list of public IP ranges to match the systemvm gateway
- Fix potential NPE seen when adding simulator host(s)
- Removes aria2 installation from setup_agent.sh using yum, it's already
dependency for cloudstack-agent package
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This happens when the root disk size is overridden. The primary storage limit check should be performed based on overridden size instead of template size. Enabled root disk resize tests to run on simulator as well.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
The first PR(#1176) intended to solve #CLOUDSTACK-9025 was only tackling the problem for CloudStack deployments that use single hypervisor types (restricted to XenServer). Additionally, the lack of information regarding that solution (poor documentation, test cases and description in PRs and Jira ticket) led the code to be removed in #1124 after a long discussion and analysis in #1056. That piece of code seemed logicless (and it was!). It would receive a hostId and then change that hostId for other hostId of the zone without doing any check; it was not even checking the hypervisor and storage in which the host was plugged into.
The problem reported in #CLOUDSTACK-9025 is caused by partial snapshots that are taken in XenServer. This means, we do not take a complete snapshot, but a partial one that contains only the modified data. This requires rebuilding the VHD hierarchy when creating a template out of the snapshot. The point is that the first hostId received is not a hostId, but a system VM ID(SSVM). That is why the code in #1176 fixed the problem for some deployment scenarios, but would cause problems for scenarios where we have multiple hypervisors in the same zone. We need to execute the creation of the VHD that represents the template in the hypervisor, so the VHD chain can be built using the parent links.
This commit changes the method com.cloud.hypervisor.XenServerGuru.getCommandHostDelegation(long, Command). From now on we replace the hostId that is intended to execute the “copy command” that will create the VHD of the template according to some conditions that were already in place. The idea is that starting with XenServer 6.2.0 hotFix ESP1004 we need to execute the command in the hypervisor host and not from the SSVM. Moreover, the method was improved making it readable and understandable; it was also created test cases assuring that from XenServer 6.2.0 hotFix ESP1004 and upward versions we change the hostId that will be used to execute the “copy command”.
Furthermore, we are not selecting a random host from a zone anymore. A new method was introduced in the HostDao called “findHostConnectedToSnapshotStoragePoolToExecuteCommand”, using this method we look for a host that is in the cluster that is using the storage pool where the volume from which the Snaphost is taken of. By doing this, we guarantee that the host that is connected to the primary storage where all of the snapshots parent VHDs are stored is used to create the template.
Consider using Disabled hosts when no Enabled hosts are found
This also closes#2317
The internal id is not usefull to the user. It is a bug to return it instead of a uuid.
In the process of fixing the above "name" was deprecated in favour of "ldap_domain".
* Cleanup and Improve NetUtils
This class had many unused methods, inconsistent names and redundant code.
This commit cleans up code, renames a few methods and constants.
The global/account setting 'api.allowed.source.cidr.list' is set
to 0.0.0.0/0,::/0 by default preserve the current behavior and thus
allow API calls for accounts from all IPv4 and IPv6 subnets.
Users can set it to a comma-separated list of IPv4/IPv6 subnets to
restrict API calls for Admin accounts to certain parts of their network(s).
This is to improve Security. Should an attacker steal the Access/Secret key
of an account he/she still needs to be in a subnet from where accounts are
allowed to perform API calls.
This is a good security measure for APIs which are connected to the public internet.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This includes test related fixes and code review fixes based on
reviews from @rafaelweingartner, @marcaurele, @wido and @DaanHoogland.
This also includes VMware disk-resize limitation bug fix based on comments
from @sateesh-chodapuneedi and @priyankparihar.
This also includes the final changes to systemvmtemplate and fixes to
code based on issues found via test failures.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Resize for VMware root disk should only be performed during VM start
when vmware.create.full.clone is true i.e. the disk chain length is one.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ports PR #1470 by @remibergsma.
Make the generated json files unique to prevent concurrency issues:
The json files now have UUIDs to prevent them from getting overwritten
before they've been executed. Prevents config to be pushed to the wrong
router.
2016-02-25 18:32:23,797 DEBUG [c.c.a.t.Request] (AgentManager-Handler-1:null) (logid:) Seq 2-4684025087442026584: Processing: { Ans: , MgmtId: 90520732674657, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.routing.GroupA
nswer":{"results":["null - success: null","null - success: [INFO] update_config.py :: Processing incoming file => vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b\n[INFO] Processing JSON file vm_dhcp_entry.json.4ea4506
1-2efb-4467-8eaa-db3d77fb0a7b\n"],"result":true,"wait":0}}] }
On the router:
2016-02-25 18:32:23,416 merge.py __moveFile:298 Processed file written to /var/cache/cloud/processed/vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b.gz
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows CloudStack administrators to create layer 2 networks on CloudStack. As these networks are purely layer 2, they don't require IP addresses or Virtual Router, only VLAN is necessary (provided by administrator or assigned by CloudStack). Also, network services should be handled externally, e.g. DNS, DHCP, as they are not provided by L2 networks.
As a consequence, a new Guest Network type is created within CloudStack: L2
Description:
Network offerings and networks support new guest type: L2.
L2 Network offering creation allows administrator to select Specify VLAN or let CloudStack assign it dynamically.
L2 Network creation allows administrator to specify VLAN tag (if network offerings allows it) or simply create network.
VM deployments on L2 networks:
VMs should not IP addresses or any network service
No Virtual Router deployed on network
If Specify VLAN = true for network offering, network gets implemented using a dynamically assigned VLAN
UI changes
A new button is added on Networks tab, available for admins, to allow L2 networks creation
com.cloud.hypervisor.hyperv.resource.HypervDummyResourceBase
class and change the log message in
com.cloud.hypervisor.hyperv.discoverer.HypervServerDiscoverer
Automatic configure juniper srx/vsrx nat loopback,
Constraint condition that manual configure source nat in juniper srx，allowed vm vist public network :
zone : trust to {trust,untrust}
rule : source address {0.0.0.0/0},destination address{0.0.0.0/0} ,do source nat with pool {public network getway ip}.
code change for trust to trust destination or static nat:
1. add srxCommand :CHECK_PRIVATE_IF_EXISTS. for add/delete rule to detect whether exist or not contain DestinationNatRule or StaticNatRule (ruleName_private) in trust zone .
2. add DestinationNatRule (ruleName_private) to trust zone when ADD DestinationNatRule to untrust .
3. delete DestinationNatRule (ruleName_private) from trust zone when DELETE DestinationNatRule from untrust.
4. add StaticNatRule (ruleName_private) to trust zone when ADD StaticNatRule to untrust .
5. delete StaticNatRule (ruleName_private) from trust zone when DELETE StaticNatRule from untrust.
Check private if exist.
The host_view may contain duplicate entries when hosts have tags.
Changing the host_view may cause unseen regressions so
to fix the issues we've modified the zone/cluster metrics code to use
the `host` table (hostdao) to iterate through the list of hosts in a
cluster during zone/cluster metrics listing.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Otherwise we send down a 'null' to a ProcessBuilder in Java instead of a String and this
causes a NPE.
We should check first if the Instance has a IPv6 address before sending it there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The listNuageVspDomainTemplat cmd was called by the ui when the create vpc dialog was opened. This command failed when no nuage vsp device was present. As a consequence the ui did not show the dialog. So currently it's not possible to create a vpc through the UI with a native CloudStack deployment. This bugfix, adds robustness to the ui that in case the cmd fails the dialog will appear nonetheless . Furthermore I also changed the listNuageVspDomainTemplateCmd to always return an empty result when there is no nuage zone.
* CLOUDSTACK-10160: Fix typo in Libvirt XML definition for Virtio-SCSI
The attribute for the XML element 'controller' should be 'model' and
not 'mode'.
Source: https://libvirt.org/formatdomain.html#elementsControllers
A scsi controller has an optional attribute model, which is one of
'auto', 'buslogic', 'ibmvscsi', 'lsilogic', 'lsisas1068', 'lsisas1078',
'virtio-scsi' or 'vmpvscsi'.
In the current state a regular SCSI device is attached and not a Virtio-SCSI
device.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-10160: Add UnitTest for LibvirtVMDef.SCSIDef
To make sure the XML output string is correct
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This commit adds support for passing IPv6 Addresses and/or Subnets as
Secondary IPs.
This is groundwork for CLOUDSTACK-9853 where IPv6 Subnets have to be
allowed in the Security Groups of Instances to we can add DHCPv6
Prefix Delegation.
Use ; instead of : for separating addresses, otherwise it would cause
problems with IPv6 Addresses.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Bump Jetty to 9.4
* Use new jetty gzip handler
* Redirect / to context
* Update wiremock but still not working
* Add session timeout configuration
* server.properties.in: Change default timeout to 30 (mins)
* cloudian: fix unit test failures
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* client: use older 9.2.x jetty-maven-plugin that works
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Moving jetty mvn plugin version in properties
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
* Set default session timeout to 30mins
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
- Migrate to embedded Jetty server.
- Improve ServerDaemon implementation.
- Introduce a new server.properties file for easier configuration.
- Have a single /etc/default/cloudstack-management to configure env.
- Reduce shaded jar file, removing unnecessary dependencies.
- Upgrade to Spring 5.x, upgrade several jar dependencies.
- Does not shade and include mysql-connector, used from classpath instead.
- Upgrade and use bountcastle as a separate un-shaded jar dependency.
- Remove tomcat related configuration and files.
- Have both embedded UI assets in uber jar and separate webapp directory.
- Refactor systemd and init scripts, cleanup packaging.
- Made cloudstack-setup-databases faster, using `urandom`.
- Remove unmaintained distro packagings.
- Moves creation and usage of server keystore in CA manager, this
deprecates the need to create/store cloud.jks in conf folder and
the db.cloud.keyStorePassphrase in db.properties file. This also
remove the need of the --keystore-passphrase in the
cloudstack-setup-encryption script.
- GZip contents dynamically in embedded Jetty
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* VSP ID Caching
* VSP call Statistics
* 5.0 Support
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Allow security policies to apply on port groups:
- Accepts security policies while creating network offering
- Deployed network will have security policies from the network offering
applied on the port group (in vmware environment)
- Global settings as fallback when security policies are not defined for a network
offering
- Default promiscuous mode security policy set to REJECT as it's the default
for standard/default vswitch
Portgroup vlan-trunking options for dvswitch: This allows admins to define
a network with comma separated vlan id and vlan
range such as vlan://200-400,21,30-50 and use the provided vlan range to
configure vlan-trunking for a portgroup in dvswitch based environment.
VLAN overlap checks are performed for:
- isolated network against existing shared and isolated networks
- dedicated vlan ranges for the physical/public network for the zone
- shared network against existing isolated network
Allow shared networks to bypass vlan overlap checks: This allows admins
to create shared networks with a `bypassvlanoverlapcheck` API flag
which when set to 'true' will create a shared network without
performing vlan overlap checks against isolated network and against
the vlans allocated to the datacenter's physical network (vlan ranges).
Notes:
- No vlan-range overlap checks are performed when creating shared networks
- Multiple vlan id/ranges should include the vlan:// scheme prefix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Several organizations use Cloudian as S3 provider, this implements the
Cloudian Management Console connector for CloudStack that can do the
following:
- Provide ease in connector configuration using CloudStack global
settings
- Perform SSO from CloudStack UI into Cloudian Management Console (CMC)
when the connector is enabled
- Automatic provisioning and de-provisioning of CloudStack accounts and
domains as Cloudian users and groups respectively
- During CloudStack UI logout, logout user from CMC
- CloudStack account will be mapped to Cloudian Users, and CloudStack
domain will be mapped to Cloudian Groups.
- The CloudStack admin account is mapped to Cloudian admin (user name
configurable).
- The user/group provisioning will be from CloudStack to Cloudian only,
i.e. user/group addition/removal/updation/deactivation in Cloudian
portal (CMC) won't propagate the changes to CloudStack.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Cloudian+Connector+for+CloudStack
New APIs:
- `cloudianIsEnabled`: API to check whether Cloudian Connector is enabled.
- `cloudianSsoLogin`: Performs SSO for the logged-in, requesting user
and returns the URL that can be used to perform
SSO and log into CMC.
New Global Settings:
- cloudian.connector.enabled (false)
If set to true, this enables the Cloudian Connector for CloudStack.
Restarting management server(s) is required.
- cloudian.admin.host (s3-admin.cloudian.com)
The host where Cloudian Admin services are accessible.
- cloudian.admin.port (19443)
The admin service port.
- cloudian.admin.protocol (https)
The admin service API scheme/protocol.
- cloudian.validate.ssl (true)
When set to true, this validates the certificate of the https-enabled
admin API service.
- cloudian.admin.user (sysadmin)
The admin user's name when making (admin) API calls.
- cloudian.admin.password (public)
The admin password used when making (admin) API calls.
- cloudian.api.request.timeout (5)
The API request timeout in seconds used by the internal HTTP/s client.
- cloudian.cmc.admin.user (admin)
The CMC admin user's name.
- cloudian.cmc.host (cmc.cloudian.com)
The CMC host.
- cloudian.cmc.port (8443)
The CMC service port.
- cloudian.cmc.protocol (https)
The CMC service scheme/protocol.
- cloudian.sso.key (ss0sh5r3dk3y)
The Single-Sign-On shared key.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors V3 x509 cert generator to put basic constraint and key usage
extensions when CA cert is created
- Refactors root CA provider to use V3 generator to generate CA cert
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This implements a CloudStack Prometheus exporter as a plugin, that serves
metrics on a HTTP port.
New global settings:
1. prometheus.exporter.enable - (default: false), Enable the prometheus
exporter plugin, management server restart needed.
2. prometheus.exporter.port - (default: 9595), The prometheus exporter
server port.
3. prometheus.exporter.allowed.ips - (default: 127.0.0.1), List of comma
separated prometheus server ips (with no spaces) that should be allowed to
access the URLs.
The following list of metrics are provided per pop (zone) with the exporter:
• Per host:
o CPU cores: used, total
o CPU usage: used, total (in MHz)
o Memory usage: used, total (in MiBs)
o Total VMs running on the host
• CPU cores: allocated (per zone)
• CPU usage: allocated (per zone, in MHz)
• Memory usage: allocated (per zone, in MiBs)
• Hosts: online, offline, total
• VMs: in all states -- starting, running, stopping, stopped, destroyed,
expunging, migrating, error, unknown
• Volumes: ready, destroyed, total
• Primary Storage Pool: (Disk size) used, allocated, unallocated, total (in GiBs)
• Secondary Storage Pool: (Disk size) used, allocated, unallocated, total (in GiBs)
• Private IPs: allocated, total
• Public IPs: allocated, total
• Shared Network IPs: allocated, total
• VLANs: allocated, total
Additional metrics for the environment:
• Summed domain (level=1) limit for CPU cores
• Summed domain (level=1) limit for memory/ram
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit is related to the Saml2 user authentication plugin.
The user can list its domains. His/Her domains are presented as the
following example:
username/subdomainA
username/subdomainB
However, if a user has two subdomains of the same name Dom1/subdomainA
and Dom2/subdomainA, the list is presented as follows:
username/subdomainA
username/subdomainA
With this commit it shows the full domain name to avoid such cases.
Thus, the domains will be presented as follows:
username/Dom1/subdomainA
username/Dom2/subdomainA
When auth strictness is set to true, terminate SSH handshake for clients
that do not present valid certificates.
This uses the `setNeedClientAuth`, where if the option is set and the
client chooses not to provide authentication information about itself,
the negotiations will stop and the engine will begin its closure
procedure:
https://docs.oracle.com/javase/7/docs/api/javax/net/ssl/SSLEngine.html#setNeedClientAuth(boolean)
During systemvm reboot, the conf folder is removed and certificate
re-setup is not done. This may cause the agent to not connect, this
fixes the case by backing up and restoring keystore and other config
files when re-patching is done after rebooting of a systemvm (cpvm, ssvm).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Commit enables a new feature for KVM hypervisor which purpose is to increase virtually amount of RAM available beyond the actual limit.
There is a new parameter in agent.properties: host.overcommit.mem.mb which enables adding specified amount of RAM to actually available. It is necessary to utilize KSM and ZSwap features which extend RAM with deduplication and compression.
The watchdog timer adds functionality where the Hypervisor can detect if an
instance has crashed or stopped functioning.
The watchdog timer adds functionality where the Hypervisor can detect if an
instance has crashed or stopped functioning.
When the Instance has the 'watchdog' daemon running it will send heartbeats
to the /dev/watchdog device.
If these heartbeats are no longer received by the HV it will reset the Instance.
If the Instance never sends the heartbeats the HV does not take action. It only
takes action if it stops sending heartbeats.
This is supported since Libvirt 0.7.3 and can be defined in the XML format as
described in the docs: https://libvirt.org/formatdomain.html#elementsWatchdog
To the 'devices' section this will be added:
In the agent.properties the action to be taken can be defined:
vm.watchdog.action=reset
The same goes for the model. The Intel i6300esb is however the most commonly used.
vm.watchdog.model=i6300esb
When the Instance has the 'watchdog' daemon running it will send heartbeats
to the /dev/watchdog device.
If these heartbeats are no longer received by the HV it will reset the Instance.
If the Instance never sends the heartbeats the HV does not take action. It only
takes action if it stops sending heartbeats.
This is supported since Libvirt 0.7.3 and can be defined in the XML format as
described in the docs: https://libvirt.org/formatdomain.html#elementsWatchdog
To the 'devices' section this will be added:
<watchdog model='i6300esb' action='reset'/>
In the agent.properties the action to be taken can be defined:
vm.watchdog.action=reset
The same goes for the model. The Intel i6300esb is however the most commonly used.
vm.watchdog.model=i6300esb
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This causes VM deployment failure on the host that was disabled while adding the storage repository.
In the attachCluster function of the PrimaryDataStoreLifeCycle, we were only selecting hosts that are up and are in enabled state. Here if we select all up hosts, it will populate the DB properly and will fix this issue. Also added a unit test for attachCluster function.
If there are multiple files with the same name on vmware datastore, search operation may select any one file during volume related operations. This involves volume attach/detach, volume download, volume snapshot etc.
While using NetApp as the backup solution. This has .snapshot folder on the datastore and sometimes files from this folder gets selected during volume operations and the operation fails. Because of wrong selection of file following exception can be observed while volume deletion.
2017-02-23 19:39:05,750 ERROR [c.c.s.r.VmwareStorageProcessor] (DirectAgent-304:ctx-a1dbf5d8 ac.local) delete volume failed due to Exception: java.lang.RuntimeException
Message: Cannot delete file [4cbcd46d44c53f5c8244c0aad26a97e1] .snapshot/hourly.2017-02-23_1605/r-97-VM/ROOT-97.vmdk
To fix this behavior I have added a global configuration by name vmware.search.exclude.folders which can be comma separated list of folder paths.
I have also added a unit test to test the new method.
- All tests should pass on KVM, Simulator
- Add test cases covering FSM state transitions and actions
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Removed three bg thread tasks, uses FSM event-trigger based scheduling
- On successful recovery, kicks VM HA
- Improves overall HA scheduling and task submission, lower DB access
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Host-HA offers investigation, fencing and recovery mechanisms for host that for
any reason are malfunctioning. It uses Activity and Health checks to determine
current host state based on which it may degrade a host or try to recover it. On
failing to recover it, it may try to fence the host.
The core feature is implemented in a hypervisor agnostic way, with two separate
implementations of the driver/provider for Simulator and KVM hypervisors. The
framework also allows for implementation of other hypervisor specific provider
implementation in future.
The Host-HA provider implementation for KVM hypervisor uses the out-of-band
management sub-system to issue IPMI calls to reset (recover) or poweroff (fence)
a host.
The Host-HA provider implementation for Simulator provides a means of testing
and validating the core framework implementation.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new certificate authority framework that allows
pluggable CA provider implementations to handle certificate operations
around issuance, revocation and propagation. The framework injects
itself to `NioServer` to handle agent connections securely. The
framework adds assumptions in `NioClient` that a keystore if available
with known name `cloud.jks` will be used for SSL negotiations and
handshake.
This includes a default 'root' CA provider plugin which creates its own
self-signed root certificate authority on first run and uses it for
issuance and provisioning of certificate to CloudStack agents such as
the KVM, CPVM and SSVM agents and also for the management server for
peer clustering.
Additional changes and notes:
- Comma separate list of management server IPs can be set to the 'host'
global setting. Newly provisioned agents (KVM/CPVM/SSVM etc) will get
radomized comma separated list to which they will attempt connection
or reconnection in provided order. This removes need of a TCP LB on
port 8250 (default) of the management server(s).
- All fresh deployment will enforce two-way SSL authentication where
connecting agents will be required to present certificates issued
by the 'root' CA plugin.
- Existing environment on upgrade will continue to use one-way SSL
authentication and connecting agents will not be required to present
certificates.
- A script `keystore-setup` is responsible for initial keystore setup
and CSR generation on the agent/hosts.
- A script `keystore-cert-import` is responsible for import provided
certificate payload to the java keystore file.
- Agent security (keystore, certificates etc) are setup initially using
SSH, and later provisioning is handled via an existing agent connection
using command-answers. The supported clients and agents are limited to
CPVM, SSVM, and KVM agents, and clustered management server (peering).
- Certificate revocation does not revoke an existing agent-mgmt server
connection, however rejects a revoked certificate used during SSL
handshake.
- Older `cloudstackmanagement.keystore` is deprecated and will no longer
be used by mgmt server(s) for SSL negotiations and handshake. New
keystores will be named `cloud.jks`, any additional SSL certificates
should not be imported in it for use with tomcat etc. The `cloud.jks`
keystore is stricly used for agent-server communications.
- Management server keystore are validated and renewed on start up only,
the validity of them are same as the CA certificates.
New APIs:
- listCaProviders: lists all available CA provider plugins
- listCaCertificate: lists the CA certificate(s)
- issueCertificate: issues X509 client certificate with/without a CSR
- provisionCertificate: provisions certificate to a host
- revokeCertificate: revokes a client certificate using its serial
Global settings for the CA framework:
- ca.framework.provider.plugin: The configured CA provider plugin
- ca.framework.cert.keysize: The key size for certificate generation
- ca.framework.cert.signature.algorithm: The certificate signature algorithm
- ca.framework.cert.validity.period: Certificate validity in days
- ca.framework.cert.automatic.renewal: Certificate auto-renewal setting
- ca.framework.background.task.delay: CA background task delay/interval
- ca.framework.cert.expiry.alert.period: Days to check and alert expiring certificates
Global settings for the default 'root' CA provider:
- ca.plugin.root.private.key: (hidden/encrypted) CA private key
- ca.plugin.root.public.key: (hidden/encrypted) CA public key
- ca.plugin.root.ca.certificate: (hidden/encrypted) CA certificate
- ca.plugin.root.issuer.dn: The CA issue distinguished name
- ca.plugin.root.auth.strictness: Are clients required to present certificates
- ca.plugin.root.allow.expired.cert: Are clients with expired certificates allowed
UI changes:
- Button to download/save the CA certificates.
Misc changes:
- Upgrades bountycastle version and uses newer classes
- Refactors SAMLUtil to use new CertUtils
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Since libvirt 1.2.2 libvirt will properly create volumes
using RBD format 2.
We can use libvirt to creates the volumes which strips a bit of
code from the CloudStack Agent's responsbility.
RBD format 2 is already used by all volumes created by CloudStack.
This format is the most recent format of RBD and is still actively
being developed.
This removes the support for Ubuntu 12.04 as that does not have the
proper libvirt version available.
Signed-off-by: Wido den Hollander wido@widodh.nl
We can use libvirt to creates the volumes which strips a bit of
code from the CloudStack Agent's responsbility.
RBD format 2 is already used by all volumes created by CloudStack.
This format is the most recent format of RBD and is still actively
being developed.
This removes the support for Ubuntu 12.04 as that does not have the
proper libvirt version available.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Issue
=====
While listing datacenters associated with a zone, only zone Id validation is required.
There is no need to have additional checks like zone is a legacy zone or not.
Fix
===
Removed unnecessary checks over zone ID and just checking if zone with specified ID exists or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
(cherry picked from commit 0ef1c17541)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Summary: CLOUDSTACK-8921
snapshot_store_ref table should store actual size of back snapshot in secondary storage
Calling SR scan to make sure size is updated correctly
(cherry picked from commit 4e4b67cd96)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
with XenServer & Local SR (Db_exn.Uniqueness_constraint_violation)
removed the host uuid from SR label so that any host which has access to
the SR(all the hosts in the same pool) can reuse the same SR
(cherry picked from commit 1aa6a72bc7)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
as that snapshot will never be going to use again and also it will fill up primary storage
(cherry picked from commit 336df84f17)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Updated hardcoded value with max data volumes limit from hypervisor capabilities.
(cherry picked from commit 93f5b6e8a3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Consider the CPU and memory overcommit ratios with total cpu/ram values
or thresholds for host metrics. This will fix incorrect notification
(cells turning yellow/red) in the metrics view.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Libvirt / Qemu (KVM) does not collect statistics about these either.
On some systems it might even yield a 'internal error' from libvirt
when attempting to gather block statistics from such devices.
For example Ubuntu 16.04 (Xenial) has a issue with this.
Skip them when looping through all devices.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.9:
Do not set gateway to 0.0.0.0 for windows clients
CLOUDSTACK-9904: Fix log4j to have @AGENTLOG@ replaced
ignore bogus default gateway when a shared network is secondary the default gateway gets overwritten by a bogus one dnsmasq does the right thing and replaces it with its own default which is not good for us so check for '0.0.0.0'
Activate NioTest following changes in CLOUDSTACK-9348 PR #1549
CLOUDSTACK-9828: GetDomRVersionCommand fails to get the correct version as output Fix tries to return the output as a single command, instead of appending output from two commands
CLOUDSTACK-3223 Exception observed while creating CPVM in VMware Setup with DVS
CLOUDSTACK-9787: Fix wrong return value in NetUtils.isNetworkAWithinNetworkB
with XenServer & Local SR (Db_exn.Uniqueness_constraint_violation)
removed the host uuid from SR label so that any host which has access to
the SR(all the hosts in the same pool) can reuse the same SR
1. Removed XenServerGuestOsMemoryMap from CitrixHelper.java
This java file was holding a static in memory map named XenServerGuestOsMemoryMap. This was the source for xenserver dynamic memory values(max and min). These values were moved to guest_os_details table.
2. DAO layer was modified to access these values.
3. VirtualMachineTo object was modified to populate the dynamic memory values.
4. addGuestOs and UpdateGuestOS api has been modified to update memory values.
This fixes log4j xml to have @AGENTLOG@ replaced with values defined
in build/replace.properties.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
HostStats returns cpu usage in percentage while memory usage in bytes.
This fixes a regression in maximum CPU usage deviation that did not
assume the values to be in percentage and multiple the final ratios
with 100 which leads to 100x the actual deviation value.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Test scenarios:
- Enable cluster HA after VR is created. Now stop and start VR and check its restart priority, should be High.
- Enable cluster HA before VR is created. Now create some VM and verify that VR created must have High restart priority.
master is broken after fwd-merging metrics PR #1944 from 4.9
This is due to the incorrect parent version number in the metrics pom.
Corrected the same to reflect master version number.
CLOUDSTACK-9720: [VMware] template_spool_ref table is not getting updated with correct template physical size in template_size column.Updated the template_spool_ref table with the correct template (VMware - OVA file) size.
* pr/1880:
CLOUDSTACK-9720: [VMware] template_spool_ref table is not getting updated with correct template physical size in template_size column.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9783: Improve metrics view performanceThis improves the metrics view feature by improving the rendering performance
of metrics view tables, by re-implementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance that re-implement the frontend logic at backend:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Pinging for review - @abhinandanprateek @DaanHoogland @borisstoyanov @karuturi @rashmidixit
Marvin test results:
=== TestName: test_list_clusters_metrics | Status : SUCCESS ===
=== TestName: test_list_hosts_metrics | Status : SUCCESS ===
=== TestName: test_list_infrastructure_metrics | Status : SUCCESS ===
=== TestName: test_list_pstorage_metrics | Status : SUCCESS ===
=== TestName: test_list_vms_metrics | Status : SUCCESS ===
=== TestName: test_list_volumes_metrics | Status : SUCCESS ===
=== TestName: test_list_zones_metrics | Status : SUCCESS ===
* pr/1944:
CLOUDSTACK-9783: Improve metrics view performance
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Summary: CLOUDSTACK-8921
snapshot_store_ref table should store actual size of back snapshot in secondary storage
Calling SR scan to make sure size is updated correctly
Bug-ID: CLOUDSTACK-8880: calculate free memory on host before deploying Vm. free memory = total memory - (all vm memory)With memory over-provisioning set to 1, when mgmt server starts VMs in parallel on one host, then the memory allocated on that kvm can be larger than the actual physcial memory of the kvm host.
Fixed by checking free memory on host before starting Vm.
Added test case to check memory usage on Host.
Verified Vm deploy on Host with enough capacity and also without capacity
* pr/847:
Bug-ID: CLOUDSTACK-8880: calculate free memory on host before deploying Vm. free memory = total memory - (all vm memory)
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9794: Unable to attach more than 14 devices to a VMUpdated hardcoded value with max data volumes limit from hypervisor capabilities.
* pr/1953:
CLOUDSTACK-9794: Unable to attach more than 14 devices to a VM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9698 [VMware] Make hardcorded wait timeout for NIC adapter hotplug as configurableJira
===
CLOUDSTACK-9698 [VMware] Make hardcoded wait timeout for NIC adapter hotplug as configurable
Description
=========
Currently ACS waits for 15 seconds (hard coded) for hot-plugged NIC in VR running on VMware to get detected by guest OS.
The time taken to detect hot plugged NIC in guest OS depends on type of VMware NIC adapter like (E1000, VMXNET3, E1000e etc.)
and guest OS itself. In uncommon scenarios the NIC detection may take longer time than 15 seconds,
in such cases NIC hotplug would be treated as failure which results in VPC tier configuration failure.
Alternatively making the wait timeout for NIC adapter hotplug as configurable will be helpful for admins in such scenarios. This is specific to VR running over VMware hypervisor.
Also in future if VMware introduces new NIC adapter types which may take time to get detected by guest OS, it is good to have flexibility of
configuring the wait timeout as fallback mechanism in such scenarios.
Fix
===
Introduce new configuration parameter (via ConfigKey) "vmware.nic.hotplug.wait.timeout" which is "Wait timeout (milli seconds) for hot plugged NIC of VM to be detected by guest OS." as fallback instead of hard coded timeout, to ensure flexibility for admins given the listed scenarios above.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
* pr/1861:
CLOUDSTACK-9698 Make the wait timeout for NIC adapter hotplug as configurable
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
* 4.9:
moved logrotate from cron.daily to cron.hourly for vpcrouter in cloud-early-config
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
[4.9] CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agentThe router.aggregation.command.each.timeout in global configuration is only applied on new created KVM host.
For existing KVM host, changing the value will not be effective.
We need to propagate the configuration to existing host when cloudstack-agent is connected.
* pr/1856:
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This adds support for virtio-scsi on KVM hosts, either
for guests that are associated with a new os_type of 'Other PV Virtio-SCSI (64-bit)',
or when a VM or template is regstered with a detail parameter rootDiskController=scsi.
Update cloudstack add template dialog to allow for selecting rootDiskController with KVM
Update cloudstack kvm virtio-scsi to enable discard=unmap
Currently ACS waits for 15 seconds (hard coded) for hot-plugged NIC in VR to get detected by guest OS.
The time taken to detect hot plugged NIC in guest OS depends on type of NIC adapter like (E1000, VMXNET3, E1000e etc.)
and guest OS itself. In uncommon scenarios the NIC detection may take longer time than 15 seconds,
in such cases NIC hotplug would be treated as failure which results in VPC tier configuration failure.
Alternatively making the wait timeout for NIC adapter hotplug as configurable will be helpful for admins in such scenarios.
Also in future if VMware introduces new NIC adapter types which may take time to get detected by guest OS, it is good to have flexibility of
configuring the wait timeout as fallback mechanism in such scenarios.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
This improves the metrics view feature by improving the rendering performance
of metrics view tables, by reimplementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.9:
CLOUDSTACK-9746 system-vm: logrotate config causes critical failures
CLOUDSTACK-9788: Fix exception listNetworks with pagesize=0
CLOUDSTACK-8663: Fixed various issues to allow VM snapshots and volume snapshots to exist together
Fix HVM VM restart bug in XenServer
CLOUDSTACK-9363: Fix HVM VM restart bug in XenServerHere is the longer description of the problem:
By default XenServer limits HVM guests to only 4 disks. Two of those are reserved for the ROOT disk (deviceId=0) and CD ROM (device ID=3) which means that we can only attach 2 data disks. This limit however is removed when Xentools is installed on the guest. The information that a guest has Xentools installed and can handle more than 4 disks is stored in the VM metadata on XenServer. When a VM is shut down, Cloudstack removes the VM and all the metadata associated with the VM from XenServer. Now, when you start the VM again, even if it has Xentools installed, it will default to only 4 attachable disks.
Now this problem manifests itself when you have a HVM VM and you stop and start it with more than 2 data disks attached. The VM fails to start and the only way to start the VM is to detach the extra disks and then reattach them after the VM start.
In this fix, I am removing the check which is done before creating a `VBD` which enforces this limit. This will not affect current workflow and will fix the HVM issue.
@koushik-das this is related to the "autodetect" feature that you introduced a while back (https://issues.apache.org/jira/browse/CLOUDSTACK-8826). I would love your review on this fix.
* pr/1829:
Fix HVM VM restart bug in XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9618: Load Balancer configuration page does not have "Source" method in the drop down list.If we create an isolated network with NetScaler published service offering for Load balancing service, then the load balancing configuration UI does not show "Source" as one of the supported LB methods in the drop down list. It only shows "Round-Robin" and "LeastConnection" methods in the list. However, It successfully creates LB rule with "Source" as the LB method using API.
* pr/1786:
CLOUDSTACK-9618: Load Balancer configuration page does not have "Source" method in the drop down list
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
snapshots to exist together
Reverting VM to disk only snapshot in Xenserver corrupts VM
Stale NFS secondary storage on XS leads to volume creation failure from snapshot
[4.10] CLOUDSTACK-8746: VM Snapshotting implementation for KVM
* pr/977:
Fixes for testing VM Snapshots on KVM. Related to PR 977
CLOUDSTACK-8746: vm snapshot implementation for KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9359: IPv6 for Basic NetworkingThis PR is a proposal for adding very basic IPv6 to Basic Networking. The main goal of this PR is that the API returns a valid IPv6 address over which the Instance is reachable.
The GUI will show the IPv6 address after deployment of the Instance.
If the table VLAN has a proper IPv6 CIDR configured the DirectPodBasedNetworkGuru will calculate the IPv6 Address the Instance will obtain using EUI-64 and SLAAC: https://tools.ietf.org/search/rfc4862
In this case the _vlan_ table contained:
<pre>mysql> select * from vlan \G
*************************** 1. row ***************************
id: 1
uuid: 90e0716c-5261-4992-bb9d-0afd3006f476
vlan_id: vlan://untagged
vlan_gateway: 172.16.0.1
vlan_netmask: 255.255.255.0
description: 172.16.0.10-172.16.0.250
vlan_type: DirectAttached
data_center_id: 1
network_id: 204
physical_network_id: 200
ip6_gateway: 2001:980:7936:112::1
ip6_cidr: 2001:980:7936:112::/64
ip6_range: NULL
removed: NULL
created: 2016-07-19 20:39:41
1 row in set (0.00 sec)
mysql></pre>
It will then log:
<pre>2016-10-04 11:42:44,998 DEBUG [c.c.n.g.DirectPodBasedNetworkGuru] (Work-Job-Executor-1:ctx-1975ec54 job-186/job-187 ctx-0d967d88) (logid:275c4961) Found IPv6 CIDR 2001:980:7936:112::/64 for VLAN 1
2016-10-04 11:42:45,009 INFO [c.c.n.g.DirectPodBasedNetworkGuru] (Work-Job-Executor-1:ctx-1975ec54 job-186/job-187 ctx-0d967d88) (logid:275c4961) Calculated IPv6 address 2001:980:7936:112:4ba:80ff:fe00:e9 using EUI-64 for NIC 6a05deab-b5d9-4116-80da-c94b48333e5e</pre>
The template has to be configured accordingly:
- No IPv6 Privacy Extensions
- Use SLAAC
- Follow RFC4862
This is also described in: https://cwiki.apache.org/confluence/display/CLOUDSTACK/IPv6+in+Basic+Networking
The next steps after this will be:
- Security Grouping to prevent IPv6 Address Spoofing
- Security Grouping to filter ICMP, UDP and TCP traffic
* pr/1700:
CLOUDSTACK-676: IPv6 In -and Egress filtering for Basic Networking
CLOUDSTACK-676: IPv6 Basic Security Grouping for KVM
CLOUDSTACK-9359: IPv6 for Basic Networking with KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9619: Updates for SAN-assisted snapshotsThis PR is to address a few issues in #1600 (which was recently merged to master for 4.10).
In StorageSystemDataMotionStrategy.performCopyOfVdi we call getSnapshotDetails. In one such scenario, the source snapshot in question is coming from secondary storage (when we are creating a new volume on managed storage from a snapshot of ours thats on secondary storage).
This usually worked in the regression tests due to a bit of "luck": We retrieve the ID of the snapshot (which is on secondary storage) and then try to pull out its StorageVO object (which is for primary storage). If you happen to have a primary storage that matches the ID (which is the ID of a secondary storage), then getSnapshotDetails populates its Map<String, String> with inapplicable data (that is later ignored) and you dont easily see a problem. However, if you dont have a primary storage that matches that ID (which I didnt today because I had removed that primary storage), then a NullPointerException is thrown.
I have fixed that issue by skipping getSnapshotDetails if the source is coming from secondary storage.
While fixing that, I noticed a couple more problems:
1) We can invoke grantAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
2) We can invoke revokeAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
I have corrected those issues, as well.
I then came across one more problem:
When using a SAN snapshot and copying it to secondary storage or creating a new managed-storage volume from a snapshot of ours on secondary storage, we attach to the SR in the XenServer code, but detach from it in the StorageSystemDataMotionStrategy code (by sending a message to the XenServer code to perform an SR detach). Since we know to detach from the SR after the copy is done, we should detach from the SR in the XenServer code (without that code having to be explicitly called from outside of the XenServer logic).
I went ahead and changed that, as well.
JIRA Ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-9619
* pr/1749:
CLOUDSTACK-9619: Updates for SAN-assisted snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This commit implements basic Security Grouping for KVM in
Basic Networking.
It does not implement full Security Grouping yet, but it does:
- Prevent IP-Address source spoofing
- Allow DHCPv6 clients, but disallow DHCPv6 servers
- Disallow Instances to send out Router Advertisements
The Security Grouping allows ICMPv6 packets as described by RFC4890
as they are essential for IPv6 connectivity.
Following RFC4890 it allows:
- Router Solicitations
- Router Advertisements (incoming only)
- Neighbor Advertisements
- Neighbor Solicitations
- Packet Too Big
- Time Exceeded
- Destination Unreachable
- Parameter Problem
- Echo Request
ICMPv6 is a essential part of IPv6, without it connectivity will break or be very
unreliable.
For now it allows any UDP and TCP packet to be send in to the Instance which
effectively opens up the firewall completely.
Future commits will implement Security Grouping further which allows controlling UDP and TCP
ports for IPv6 like can be done with IPv4.
Regardless of the egress filtering (which can't be done yet) it will always allow outbound DNS
to port 53 over UDP or TCP.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
* CloudStack root pom change to use Amazon WS 11.1.16
caused our client to fail, as it was depending on classes,
which are not not present anymore.
Latest client version uses Gson instead.
* increase robustness of nuagevsp tests
`- test_nuage_internal_dns - move vm2 creation upwards
`- test_nuage_static_nat - delete vm in test step to avoid sut restriction
BUG-ID: CLOUDSTACK-9729i
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Bugfix-for: master
- Switches Travis to use jdk1.8
- Changes java-version to 1.8
- Change jdk/maven version to 1.8
- Switch to F5/java8 compatible library release
- Switch packaging to use jdk 1.8, and jre 1.8 in init/systemd scripts
- Switch systemvm to openjdk-8-jre
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
While remote executing commands/scripts through SSH in VR, ACS uses system vm keyfile.
ACS is fetching this key file using VMwareContext object which encapsulates vCenter connection handle.
This is inefficient because of dependency on getServiceContext() which means a vCenter connection
handle which is not required just to fetch a file in name space in management server.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
Issue
=====
While listing datacenters associated with a zone, only zone Id validation is required.
There is no need to have additional checks like zone is a legacy zone or not.
Fix
===
Removed unnecessary checks over zone ID and just checking if zone with specified ID exists or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
CLOUDSTACK-9456: Migrate master to Spring 4.xThis changes makes CloudStack use spring 4:
```
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK7
- Bump servet dependency version
- Migrates various xmls to use version independent schema uris
```
Outstanding issue:
- Testing of various non-standard plugins such as network and storage plugins etc.
Since, this is a big change pinging for review -- @jburwell @karuturi @wido @murali-reddy @abhinandanprateek @DaanHoogland @GaborApatiNagy @JayapalUradi @kishankavala @K0zka @nvazquez @rafaelweingartner @pyr and others
@blueorangutan package
* pr/1638:
CLOUDSTACK-9456: Update Spring version in maven poms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
XenServer 7 SupportThis PR adds support for XenServer 7. I have manually done the following tests
- Create a new cluster with XenServer7
- Add Primary storage: Should create an SR on XS7
- Add another XS7 host to the Pool
- Add host2 to Cloudstack
- Create VM1 from template
- Create VM2 from template
- Ping/SSH VM1 to VM2 and vice-versa
- Stop/Delete/Expunge VM2
- Create Data disk
- Attach it to VM1
- Create VM snaphsot of VM1
- Restore VM snapshot of VM1
- Delete VM snapshot of VM1
- Create Volume snapshot of Datadisk
- Create volume snapshot of Root disk
- Create new template from snapshot of root disk
- Create volume from snapshot of datadisk
- Detach datadisk volume
- Delete datadisk volume
- Aquire a public IP
- Create a static nat to VM1
- Live migrate VM1 while traffic on VM
- Delete VM1
* pr/1711:
[CLOUDSTACK-9662] Add support for XenServer 7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Issue
====
Exception occured while creating the CPVM in the VmWare Setup using standard vswitches.
StartCommand failed due to Exception: com.vmware.vim25.AlreadyExists
message: [] com.vmware.vim25.AlreadyExistsFaultMsg: The specified key, name, or identifier already exists
Fix
===
Ensure synchronization while attempting to create port group such that simultaneous attempts are not made with same port group name on same ESXi host.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9403 : Support for shared networks in Nuage VSP pluginThis is first phase of support of Shared Network in cloudstack through NuageVsp Network Plugin. A shared network is a type of virtual network that is shared between multiple accounts i.e. a shared network can be accessed by virtual machines that belong to many different accounts. This basic functionality will be supported with the below common use case:
- shared network can be used for monitoring purposes. A shared network can be assigned to a domain and can be used for monitoring VMs belonging to all accounts in that domain.
With the current implementation with NuageVsp plugin, Each shared network needs its unique IP address range, and can not overlap with another shared network.
In VSD, it is implemented in below manner:
- In order to have tenant isolation for shared networks, we will have to create a Shared L3 Subnet for each shared network, and instantiate it across the relevant enterprises. A shared network will only exist under an enterprise when it is needed, so when the first VM is spinned under that ACS domain inside that shared network.
PR contents:
1) Support for shared networks with tenant isolation on master with Nuage VSP SDN Plugin.
2) Marvin test coverage for shared networks on master with Nuage VSP SDN Plugin.
3) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
4) PEP8 & PyFlakes compliance with our Marvin test code.
* pr/1579:
CLOUDSTACK-9403: Support for shared networks in Nuage VSP plugin
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
-when processing static nat rule, add a mangle table rule, to mark the traffic
from the guest vm when it has associated static nat rule so that traffic gets
routed using the route tabe of the device which has public ip associated
-fix the case where nic_device_id is empty when ip is getting disassociated
resulting in empty deviceid in ips.json
-add utility methods in CsRule, and CsRoute to add 'ip rule' and 'ip route' rules respectivley
-ensure traffic from all public interfaces are connection marked with device number, and restored
for the reverse traffic. use the connection marked number to do device specific routing table lookup
fill the device specific routing table with default route
-component tests for testing multiple public interfaces of VR
- Upgrades Maven dependency version to v1.55
- Fixes bountycastle usages and issues
- Adds timeout to jetty/annotation scanning
- Fixes servlet issue, uses servlet 3.1.0
- Downgrade javassist used by reflections to fix annotation process errors
- Make console-proxy-rdp bc dependency same as rest of the codebase
- Picks up PR #1510 by Daan
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary storeThe race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
* pr/1765:
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary store The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously. Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Introduced a global configuration flag 'cluster.threshold.enabled'. By default the flag is true.
If the value is false, then a VM can be started in a cluster even if the cluster thresholds are
crossed. However, for a new VM deployment the cluster threshold will always be honoured.
The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9321 : Multiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg fileMultiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg file. Moreover, each time a new Internal LB rule is added to the corresponding InternalLbVm instance, it replaces the existing one. Thus, traffic corresponding to these un-resolved (old) Internal LB rules are getting dropped by the InternalLbVm instance.
PR contents:
1) Fix for this bug.
2) Marvin test coverage for Internal LB feature on master with native ACS setup (component directory) including validations for this bug fix.
3) Enhancements on our exiting Internal LB Marvin test code (nuagevsp plugins directory) to validate this bug fix.
4) PEP8 & PyFlakes compliance with the added Marvin test code.
* pr/1577:
CLOUDSTACK-9321 : Multiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg file
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP pluginSupport for underlay features (Source & Static NAT to underlay) with Nuage VSP SDN Plugin including Marvin test coverage for corresponding Source & Static NAT features on master. Moreover, our Marvin tests are written in such a way that they can validate our supported feature set with both Nuage VSP SDN platform's overlay and underlay infra.
PR contents:
1) Support for Source NAT to underlay feature on master with Nuage VSP SDN Plugin.
2) Support for Static NAT to underlay feature on master with Nuage VSP SDN Plugin.
3) Marvin test coverage for Source & Static NAT to underlay on master with Nuage VSP SDN Plugin.
4) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
5) PEP8 & PyFlakes compliance with our Marvin test code.
* pr/1580:
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP plugin
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns IDThere is difference in instance-id metadata across baremetal and other hypervisors.
On Baremetal
[root@ip-172-17-0-144 ~]# curl http://8.37.203.221/latest/meta-data/instance-id
6021
on Xen
[root@ip-172-17-2-103 ~]# curl http://172.17.0.252/latest/meta-data/instance-id
cbeb517a-e833-4a0c-b1e8-9ed70200fbbf
In both cases it should be vm's uuid.
* pr/1738:
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns ID
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Marvin tests for Source NAT and Static NAT features verification with NuageVsp (both overlay and underlay infra).
Co-Authored-By: Prashanth Manthena <prashanth.manthena@nuagenetworks.net>, Frank Maximus <frank.maximus@nuagenetworks.net>
This commit adds a additional VirtIO channel with the name
'org.qemu.guest_agent.0' to all Instances.
With the Qemu Guest Agent the Hypervisor gains more control over the Instance if
these tools are present inside the Instance, for example:
* Power control
* Flushing filesystems
* Fetching Network information
In the future this should allow safer snapshots on KVM since we can instruct the
Instance to flush the filesystems prior to snapshotting the disk.
More information: http://wiki.qemu.org/Features/QAPI/GuestAgent
Keep in mind that on Ubuntu AppArmor still needs to be disabled since the default
AppArmor profile doesn't allow libvirt to write into /var/lib/libvirt/qemu
This commit does not add any communication methods through API-calls, it merely
adds the channel to the Instances and installs the Guest Agent in the SSVMs.
With the addition of the Qemu Guest Agent channel a second channel appears in /dev
on a SSVM as a VirtIO port.
The order in which the ports are defined in the XML matters for the naming inside
the SSVM VM and by not relying on /dev/vportXX but looking for a static name the
SSVM still boots properly if the order in the XML definition is changed.
A SSVM with both ports attached will have something like this:
root@v-215-VM:~# ls -l /dev/virtio-ports
total 0
lrwxrwxrwx 1 root root 11 May 13 21:41 org.qemu.guest_agent.0 -> ../vport0p2
lrwxrwxrwx 1 root root 11 May 13 21:41 v-215-VM.vport -> ../vport0p1
root@v-215-VM:~# ls -l /dev/vport*
crw------- 1 root root 251, 1 May 13 21:41 /dev/vport0p1
crw------- 1 root root 251, 2 May 13 21:41 /dev/vport0p2
root@v-215-VM:~#
In this case the SSVM port points to /dev/vport0p1, but if the order in the XML
is different it might point to /dev/vport0p2
By looking for a portname with a pre-defined pattern in /dev/virtio-ports we
do not rely on the order in the XML definition.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor## Introduction
[JIRA TICKET](https://issues.apache.org/jira/browse/CLOUDSTACK-9379)
It is desired to support nested virtualization at VM level for VMware hypervisor. Current behaviour supports enabling/desabling global nested virtualization by modifying global config `'vmware.nested.virtualization'`. It is wished to improve this feature, having control at VM level instead of a global control only.
A new global configuration is added, to enable/disable VM nested virtualization control: `'vmware.nested.virtualization.perVM'`. Default value=false
After a vm deployment or start command, vm params include `'nestedVirtualizationFlag'` key and its value is:
- true -> nested virtualization enabled
- false -> nested virtualization disabled
**We will determinate nested virtualization enabled/disabled by examining this 3 values:**
- **(1)** global configuration `'vmware.nested.virtualization'` value
- **(2)** global configuration `'vmware.nested.virtualization.perVM'` value
- **(3)** `'nestedVirtualizationFlag'` value in `user_vm_details` if present, `null` if not.
Using this 3 values, there are different use cases:
- **(1)** = TRUE, **(2)** = TRUE, **(3)** is null -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = TRUE, **(2)** = FALSE, **(3)** indifferent -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** is null -> _DISABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = FALSE, **(2)** = FALSE, **(3)** indifferent -> _DISABLED_
* pr/1542:
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
* 4.9:
CLOUDSTACK-8830: Fix for vm snapshots in Vmware, could not create vm snapshot until 12 minutes after vm creation due to vCenter sent null name on snpashot recent task
CLOUDSTACK-8830 - [Vmware] VM snapshot fails for 12 min after instance creation (Targeted for 4.9)Continuing work by @maneesha-p in #798
This closes#798
* pr/1677:
CLOUDSTACK-8830: Fix for vm snapshots in Vmware, could not create vm snapshot until 12 minutes after vm creation due to vCenter sent null name on snpashot recent task
Signed-off-by: John Burwell <meaux@cockamamy.net>
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Support Backup of Snapshots for Managed Storage```
This PR adds an ability to Pass a new parameter, locationType,
to the createSnapshot API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Primary`: The standard operation for managed storage is to
keep the snapshot on the device (primary). For non-managed storage, this will
give an error as this option is only supported for managed storage
2) `Secondary`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
```
* pr/1600:
Support Backup of Snapshots for Managed Storage
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UIJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9438
### Introduction
From #1361 it was possible to configure NFS version for secondary storage mount.
However, changing NFS version requires inserting an new detail on `image_store_details` table, with `name = 'nfs.version'` and `value = X` where X is desired NFS version, and then restarting management server for changes to take effect.
Our improvement aims to make NFS version changeable from UI, instead of previously described workflow.
### Proposed solution
Basically, NFS version is defined as an image store ConfigKey, this implied:
* Adding a new Config scope: **ImageStore**
* Make `ImageStoreDetailsDao` class to extend `ResourceDetailsDaoBase` and `ImageStoreDetailVO` implement `ResourceDetail`
* Insert `'display'` column on `image_store_details` table
* Extending `ListCfgsCmd` and `UpdateCfgCmd` to support **ImageStore** scope, which implied:
** Injecting `ImageStoreDetailsDao` and `ImageStoreDao` on `ConfigurationManagerImpl` class, on `cloud-server` module.
### Important
It is important to mention that `ImageStoreDaoImpl` and `ImageStoreDetailsDaoImpl` classes were moved from `cloud-engine-storage` to `cloud-engine-schema` module in order to Spring find those beans to inject on `ConfigurationManagerImpl` in `cloud-server` module.
We had this maven dependencies between modules:
* `cloud-server --> cloud-engine-schema`
* `cloud-engine-storage --> cloud-secondary-storage --> cloud-server`
As `ImageStoreDaoImpl` and `ImageStoreDetailsDao` were defined in `cloud-engine-storage`, and they needed in `cloud-server` module, to be injected on `ConfigurationManagerImpl`, if we added dependency from `cloud-server` to `cloud-engine-storage` we would introduce a dependency cycle. To avoid this cycle, we moved those classes to `cloud-engine-schema` module
* pr/1615:
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Wido den Hollander
Rohit Yadav
Dingane Hlaluku
Gabriel Beims Bräscher
Craig Squire
Bitworks LLC
Rohit Yadav
Paul Angus
Nicolas Vazquez
Simon Weller
Abhishek
Frank Maximus
Kui LIU
Mike Tutkowski
sureshanaparti
Slair1
Bruno P. Kinoshita
lzh3636
Mike Tutkowski
Kris Sterckx
Khosrow Moossavi
Paul Angus
Daan Hoogland
dahn
Daan Hoogland
David Passante
cl-k-takahashi
瓜@アイソマ:ゆるゆりはいいぞ
Nathan Johnson
Rafael Weingärtner
brett
Olivier Lemasle
lzh3636
Raf Smeets
mrunalinikankariya
Sigert Goeminne
Khosrow Moossavi
Marc-Aurèle Brothier
Abhinandan Prateek
koushik-das
jayakarteek
WingKai Ho
Remi Bergsma
Sigert Goeminne
pedro-martins
kishankavala
ming416
Rohit Yadav
Frank Maximus
SudharmaJain
vedulasantosh
subhash yedugundla
Boris Stoyanov
Jayapal
digitalgust
sureshanaparti
SowjanyaPatha
Sateesh Chodapuneedi
subhash yedugundla
Nitesh Sarda
Rajani Karuturi
Rene Moser
Anshul Gangwar
Nick Livens
nvazquez
Syed Mushtaq Ahmed
Wei Zhou
Nitin Kumar Maharana
Nitin Kumar Maharana
Priyank Parihar
Rajesh Battala
Rajani Karuturi
Rajani Karuturi
Bharat Kumar
Jayapal
rashmidixit
Sudhansu
Mowgli
Nathan Johnson
Anshul And Priyank
Kishan Kavala
Anshul Gangwar
Koushik Das
Murali Reddy
Abhinandan Prateek
Suresh Kumar Anaparti
John Burwell
Eric Waegeman
