The view "service_offering_view" doesn't include removed SOs, as a result when SO is removed, the bug happens. The PR introduces a change for resource calculation changing "service_offering_view" to "service_offering" table which has all service offerings.
Must be fixed in:
4.12
4.11
Fixes: #3009
This adds a new API updateVmwareDc that allows admins to update the
VMware datacenter details of a zone. It also recursively updates
the cluster_details for any username/password updates
as well as updates the url detail in cluster_details table and guid
detail in the host_details table with any newly provided vcenter
domain/ip. The update API assumes that there is only one vCenter per
zone. And, since the username/password for each VMware host could be different
than what gets configured for vcenter at zone level, it does not update the
username/password in host_details.
Previously, one has to manually update the db with any new vcenter details for the zone.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Remove some unused Classes
These classes were deleted because they have no references in our code base. They are not in Spring execution flow nor instantiated with "new":
- com.cloud.agent.api.CheckStateAnswer
- com.cloud.agent.api.StartupVMMAgentCommand
- com.cloud.agent.api.routing.UserDataCommand
- remove from description at
com.cloud.configuration.Config.ExecuteInSequenceNetworkElementCommands
enum
- com.cloud.agent.api.storage.UpgradeDiskCommand
- com.cloud.agent.api.storage.CreatePrivateTemplateCommand
- com.cloud.agent.api.storage.DestroyAnswer
- Note: "FIXME: Should have an DestroyAnswer" at
com.cloud.storage.resource.StoragePoolResource
- com.cloud.agent.api.storage.UpgradeDiskAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityCommand
- com.cloud.exception.UsageServerException
- com.cloud.info.SecStorageVmLoadInfo
- com.cloud.serializer.SerializerHelper
* PR#1448 update description of 'execute.in.sequence.network.element.commands' param
Update description of 'execute.in.sequence.network.element.commands'parameter to reflect an unused command that has been removed. The removed class command is 'UserDataCommand'.
* Add cloud schema to update SQL
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These boolean-return methods are named as "getXXX".
Other boolean-return methods are named as "isXXX".
Considering there methods will return boolean values, it should be more clear and consistent to rename them as "isXXX".
(rebase #2602 and #2816)
This fixes a regression introduced in #2799, by exporting $TYPE
before the `patch` is called to patch/extract archives for ssvm/cpvm.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMware router will be rebooted based on #2794, per current config
the VRs on reboot will go through fsck checks slowing down the deployment
process by few seconds. This will ensure that fsck checks are done
on every 3rd boot of the VR. The `4` is used because 1st boot is done
during the build of systemvmtemplate appliance.
Add upgrade path for a new 4.11.2 systemvmtemplate.
Other changes:
- Add support for XS 7.5 Fixes#2834.
- Reboot VR only if mgmt gw is not pingable on vmware.
- Enable passive ftp by enabling nf_conntrack_helper. This is change in behaviour since linux 4.7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Fix the problem at #1740 when it loads all snapshots in the primary storage
While checking a problem with @mike-tutkowski at PR #1740, we noticed that the method `org.apache.cloudstack.storage.snapshot.SnapshotDataFactoryImpl.getSnapshots(long, DataStoreRole)` was not loading the snapshots in `snapshot_store_ref` table according to their storage role. Instead, it would return a list of all snapshots (even if they are not in the storage role sent as a parameter) saying that they are in the storage that was sent as parameter.
* Add unit test
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
* 4.11:
comment on unencryption
ui: fix create VPC dialog box failure when zone is SG enabled (#2704)
CLOUDSTACK-10381: Fix password reset / reset ssh key with ConfigDrive
isisnot=
extra message
debug message
imports
update without decrypt doesn't work
set unsensitive attributes as not 'Secure'
remove old config artifacts from update path
* CLOUDSTACK-9184: Fixes#2631 VMware dvs portgroup autogrowth
This deprecates the vmware.ports.per.dvportgroup global setting.
The vSphere Auto Expand feature (introduced in vSphere 5.0) will take
care of dynamically increasing/decreasing the dvPorts when running out
of distributed ports . But in case of vSphere 4.1/4.0 (If used), as this
feature is not there, the new default value (=> 8) have an impact in the
existing deployments. Action item for vSphere 4.1/4.0: Admin should
modify the global configuration setting "vmware.ports.per.dvportgroup"
from 8 to any number based on their environment because the proposal
default value of 8 would be very less without auto expand feature in
general. The current default value of 256 may not need immediate
modification after deployment, but 8 would be very less which means
admin need to update immediately after upgrade.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a rolling restart of VRs when networks are restarted
with cleanup option for isolated and VPC networks. A make redundant option is
shown for isolated networks now in UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Using a hierarchy of database version rather than a flat
list of them. Adding a new schema upgrade path was really
cumbersome and error-prone, because we needed to maintain
a flat map of versions and their corresponding list of
upgrade paths (`DbUpgrade`). Instead we're using a logical
hierarchy structure of versions:
```
DatabaseVersionHierarchy.builder()
.next("4.0.0" , new Upgrade40to41())
.next("4.0.1" , new Upgrade40to41())
.next("4.0.2" , new Upgrade40to41())
.next("4.1.0" , new Upgrade410to420())
.next("4.1.1" , new Upgrade410to420())
.next("4.2.0" , new Upgrade420to421())
...
.next("4.2.1" , new Upgrade421to430())
.next("4.9.3.0" , new Upgrade4930to41000())
.next("4.10.0.0", new Upgrade41000to41100())
.next("4.11.0.0", new Upgrade41100to41110())
.build();
```
With this change, when we need to add a new version upgrade
path, we only need to add it in correct place in the hierarchy
rather than add that in dozens of places in `_upgradeMap`.
* CLOUDSTACK-10147 Disabled Xenserver Cluster can still deploy VM's. Added code to skip disabled clusters when selecting a host (#2442)
(cherry picked from commit c3488a51db)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10318: Bug on sorting ACL rules list in chrome (#2478)
(cherry picked from commit 4412563f19)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10284:Creating a snapshot from VM Snapshot generates error if hypervisor is not KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10221: Allow IPv6 when creating a Basic Network (#2397)
Since CloudStack 4.10 Basic Networking supports IPv6 and thus
should be allowed to be specified when creating a network.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit 9733a10ecd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10214: Unable to remove local primary storage (#2390)
Allow admins to remove primary storage pool.
Cherry-picked from eba2e1d8a1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dateutil: constistency of tzdate input and output (#2392)
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
Signed-off-by: Daan Hoogland <daan.hoogland@shapeblue.com>
(cherry picked from commit 2ad5202823)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10054:Volume download times out in 3600 seconds (#2244)
(cherry picked from commit bb607d07a9)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* When creating a new account (via domain admin) it is possible to select “root admin” as the role for the new user (#2606)
* create account with domain admin showing 'root admin' role
Domain admins should not be able to assign the role of root admin to new users. Therefore, the role ‘root admin’ (or any other of the same type) should not be visible to domain admins.
* License and formatting
* Break long sentence into multiple lines
* Fix wording of method 'getCurrentAccount'
* fix typo in variable name
* [CLOUDSTACK-10259] Missing float part of secondary storage data in listAccounts
* [CLOUDSTACK-9338] ACS not accounting resources of VMs with custom service offering
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
* [CLOUDSTACK-10230] User should not be able to use removed “Guest OS type” (#2404)
* [CLOUDSTACK-10230] User is able to change to “Guest OS type” that has been removed
Users are able to change the OS type of VMs to “Guest OS type” that has been removed. This becomes a security issue when we try to force users to use HVM VMs (Meltdown/Spectre thing). A removed “guest os type” should not be usable by any users in the cloud.
* Remove trailing lines that are breaking build due to checkstyle compliance
* Remove unused imports
* fix classes that were in the wrong folder structure
* Updates to capacity management
This moves db upgrade paths and checks around a new systemvmtemplate
for 4.11.1. The new systemvmtemplate compared to 4.11.0 template
is slightly smaller and has meltdown/spectre fixes among few other
security fixes from Debian and changes to cloud-early-config.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This adds support for XenServer 7.3 and 7.4, and XCP-ng 7.4 version as hypervisor hosts. Fixes#2523.
This also fixes the issue of 4.11 VRs stuck in starting for up-to 10mins, before they come up online.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* [CLOUDSTACK-10323] Allow changing disk offering during volume migration
This is a continuation of work developed on PR #2425 (CLOUDSTACK-10240), which provided root admins an override mechanism to move volumes between storage systems types (local/shared) even when the disk offering would not allow such operation. To complete the work, we will now provide a way for administrators to enter a new disk offering that can reflect the new placement of the volume. We will add an extra parameter to allow the root admin inform a new disk offering for the volume. Therefore, when the volume is being migrated, it will be possible to replace the disk offering to reflect the new placement of the volume.
The API method will have the following parameters:
* storageid (required)
* volumeid (required)
* livemigrate(optional)
* newdiskofferingid (optional) – this is the new parameter
The expected behavior is the following:
* If “newdiskofferingid” is not provided the current behavior is maintained. Override mechanism will also keep working as we have seen so far.
* If the “newdiskofferingid” is provided by the admin, we will execute the following checks
** new disk offering mode (local/shared) must match the target storage mode. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** we will check if the new disk offering tags match the target storage tags. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** check if the target storage has the capacity for the new volume. If it does not have enough space, then an exception is thrown and the operator will receive a message indicating the problem.
** check if the size of the volume is the same as the size of the new disk offering. If it is not the same, we will ALLOW the change of the service offering, and a warning message will be logged.
We execute the change of the Disk offering as soon as the migration of the volume finishes. Therefore, if an error happens during the migration and the volume remains in the original storage system, the disk offering will keep reflecting this situation.
* Code formatting
* Adding a test to cover migration with new disk offering (#4)
* Adding a test to cover migration with new disk offering
* Update test_volumes.py
* Update test_volumes.py
* fix test_11_migrate_volume_and_change_offering
* Fix typo in Java doc
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
* Add stack traces information
* update stack trace info
* update stack trace to make them consistent
* update stack traces
* update stacktraces
* update stacktraces for other similar situations
* fix some other situations
* enhance other situations
* Create database upgrade from 4.11.0.0 to 4.11.1.0 & VMWare version to OS mappings (#2490)
* Create database upgrade from 4.11.0.0 to 4.11.1.0. Add missing VMWare version to OS mapping SQL in the schema-41100to41110.sql.
* add unit test and add 4.11.0.0 entry to _upgradeMap
* upgrade 4.11.1 to 4.12 definition
* applied Nitin's comments
* Create database upgrade from 4.11.0.0 to 4.11.1.0. Add missing VMWare version to OS mapping SQL in the schema-41100to41110.sql.
* add unit test and add 4.11.0.0 entry to _upgradeMap
* CLOUDSTACK-10278 - WIP: need to test this script before create a pull request
* CLOUDSTACK-10278 - added more idempotent stored procs and moved all lines, that end with a semicolon in existing proc, onto one line because com/cloud/utils/db/ScriptRunner.java executes the sql as soon as it reads in line with a semicolon delimeter at the end.
* CLOUDSTACK-10278 - changed more sql statements to call idempotent stored procs
* CLOUDSTACK-10278 - WIP: need to test this script before create a pull request
* CLOUDSTACK-10278 - added more idempotent stored procs and moved all lines, that end with a semicolon in existing proc, onto one line because com/cloud/utils/db/ScriptRunner.java executes the sql as soon as it reads in line with a semicolon delimeter at the end.
* CLOUDSTACK-10278 - changed more sql statements to call idempotent stored procs
CLOUDSTACK-10341: VR minor fixes to systemvmtemplate (#2468)
CLOUDSTACK-10340: Add setter to hypervisorType in VMInstanceVO (#2504)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- new flag `-T, --use-timestamp` to use `timestamp` when POM version contains SNAPSHOT
- in the final artifacts (jar) name
- in the final package (rpm, deb) name
- in `/etc/cloudstack-release` file of SystemVMs
- in the Management Server > About dialog
- if there's a "branding" string in the POM version (e.g. `x.y.z.a-NAME[-SNAPSHOT]`),
the branding name will be used in the final generated pacakge name such as following:
- `cloudstack-management-x.y.z.a-NAME.NUMBER.el7.centos.x86_64`
- `cloudstack-management_x.y.z.a-NAME-NUMBER~xenial_all.deb`
- branding string can be overriden with newly added `-b, --brand` flag
- handle the new format version for VR version
- fix long opts (they were broken)
- tolerate and show a warning message for unrecognized flags
- usage help reformat
* Deprecate Version class in favor or CloudStackVersion
* CLOUDSTACK-8855 Improve Error Message for Host Alert State
* [CLOUDSTACK-9846] create column to save the content of alert messages
Remove declaration of throws CloudRuntimeException
I also removed some unused variables and comments left behind
This closes#837
* Isolate a problematic test "smoke/test_certauthority_root"
* [CLOUDSTACK-10314] Add Text-Field to each ACL Rule
It is interesting to have a text field (e.g. CHAR-256) added to each ACL rule, which allows to enter a "reason" for each FW Rule created. This is valuable for customer documentation, as well as best practice for an evidence towards auditing the system
* Formatting to make check style happy and code clean ups
* [CLOUDSTACK-10240] ACS cannot migrate a volume from local to shared storage.
CloudStack is logically restricting the migration of local storages to shared storage and vice versa. This restriction is a logical one and can be removed for XenServer deployments. Therefore, we will enable migration of volumes between local-shared storages in XenServers independently of their service offering. This will work as an override mechanism to the disk offering used by volumes. If administrators want to migrate local volumes to a shared storage, they should be able to do so (the hypervisor already allows that). The same the other way around.
* Cleanups implemented while working on [CLOUDSTACK-10240]
* Fix test case test_03_migrate_options_storage_tags
The changes applied were:
- When loading hypervisors capabilities we must use "default" instead of nulls
- "Enable" storage migration for simulator hypervisor
- Remove restriction on "ClusterScopeStoragePoolAllocator" to find shared pools
4.10.0.0 users when upgrade to 4.11.0.0 may face db related
discrepancies due to some PRs that got merged without moving their sql
changes to 4.10->4.11 upgrade path. The 4.10.0.0 users can run those
missing sql statements manually and then upgrade to 4.11.0.0, since a
workaround like this is possible this ticket is not marked a blocker. In
4.11.1.0+, we'll move those changes from 4.9.3.0->4.10.0.0 upgrade path
to 4.10.0.0->4.11.0.0 upgrade path. Ideally we should not be doing this,
but this will fix issues for a future 4.10.0.0 user who may want to
upgrade to 4.11.1.0 or 4.12.0.0+.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
Automate dynamic roles migration for missing props file
- In case commands.properties file is missing, enables dynamic roles.
- Adds a new -D or --default flag to migrate-dynamicroles.py script
to simply update the global setting and use the default role-rule
permissions.
- Add warning message, ask admins to move to dynamic roles during upgrade
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes move refactoring error introduced in #2283
For instance, the class DatadiskTO is supposed to be in com.cloud.agent.api.to package. However, the folder structure it was placed in is com.cloud.agent.api.api.to.
Skip tests for cloud-plugin-hypervisor-ovm3:
For some unknown reason, there are quite a lot of broken test cases for cloud-plugin-hypervisor-ovm3. They might have appeared after some dependency upgrade and was overlooked by the person updating them. I checked them to see if they could be fixed, but these tests are not developed in a clear and clean manner. On top of that, we do not see (at least I) people using OVM3-hypervisor with ACS. Therefore, I decided to skip them.
Identention corrected to use spaces instead of tabs in XML files
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
This fixes regression failures seen in Trillian, fixes NPEs that cause Travis related failures.
This also removes the aria2 dependency from rpms that require users to enable/install epel-release.
This finally updates the checksums for 4.11 systemvmtemplates in db upgrade path.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
Steps to reproduce issue
Deploy a VM
Take snapshot of the root volume
Delete the snapshot
Before the garbage collector has run, shutdown the VM and assign the VM to other user.
When garage collector executes NPE shows in the logs.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
The first PR(#1176) intended to solve #CLOUDSTACK-9025 was only tackling the problem for CloudStack deployments that use single hypervisor types (restricted to XenServer). Additionally, the lack of information regarding that solution (poor documentation, test cases and description in PRs and Jira ticket) led the code to be removed in #1124 after a long discussion and analysis in #1056. That piece of code seemed logicless (and it was!). It would receive a hostId and then change that hostId for other hostId of the zone without doing any check; it was not even checking the hypervisor and storage in which the host was plugged into.
The problem reported in #CLOUDSTACK-9025 is caused by partial snapshots that are taken in XenServer. This means, we do not take a complete snapshot, but a partial one that contains only the modified data. This requires rebuilding the VHD hierarchy when creating a template out of the snapshot. The point is that the first hostId received is not a hostId, but a system VM ID(SSVM). That is why the code in #1176 fixed the problem for some deployment scenarios, but would cause problems for scenarios where we have multiple hypervisors in the same zone. We need to execute the creation of the VHD that represents the template in the hypervisor, so the VHD chain can be built using the parent links.
This commit changes the method com.cloud.hypervisor.XenServerGuru.getCommandHostDelegation(long, Command). From now on we replace the hostId that is intended to execute the “copy command” that will create the VHD of the template according to some conditions that were already in place. The idea is that starting with XenServer 6.2.0 hotFix ESP1004 we need to execute the command in the hypervisor host and not from the SSVM. Moreover, the method was improved making it readable and understandable; it was also created test cases assuring that from XenServer 6.2.0 hotFix ESP1004 and upward versions we change the hostId that will be used to execute the “copy command”.
Furthermore, we are not selecting a random host from a zone anymore. A new method was introduced in the HostDao called “findHostConnectedToSnapshotStoragePoolToExecuteCommand”, using this method we look for a host that is in the cluster that is using the storage pool where the volume from which the Snaphost is taken of. By doing this, we guarantee that the host that is connected to the primary storage where all of the snapshots parent VHDs are stored is used to create the template.
Consider using Disabled hosts when no Enabled hosts are found
This also closes#2317
This extends work presented on #2048 on which the ability to extend the management range is provided.
Aim
This PR allows separating the management network subnet on which SSVM and CPVM are from the virtual routers management subnet.
Detailed use case
PCI compliance requires that network elements are defined as ‘in scope’ or ‘out of scope’, for compliance purposes. The SSVM and CPVM are both in scope as they allow public HTTP or HTTPS connections. The virtual routers have been defined as out of scope as they have been placed entirely in a firewalled network's segment. However, all of the system VM types share management network. As SSVM and CPVM are both in scope this would bring the virtual routers into scope as well, requiring individual audits of every virtual router. As this is not practical, the ‘management network’ which the SSVM and CPVM are on, and the management network which the virtual routers are on, must be separated by a firewall.
Description
By this feature it is possible to dedicate a created range for SSVM and CPVM (system vms) and provide a VLAN ID for its range.
A new boolean global configuration is added: system.vm.management.ip.reservation.mode.strictness. If enabled, the use of System VMs management IP reservation is strict, preferred if not. Default value is false (preferred).
Strict reservation: System VMs should try to get a private IP from a range marked for system vms. If not available, deployment fails
Preferred reservation: System VMS will try to get a private IP from a range marked for system vms. If not available, IP for range not marked for system vms is taken.
In CLOUDSTACK-9886, we are reading ping.interval and ping.timeout using configdao which involves direct reading of DB. So, replaced it with ConfigKey based approach.
Consider this scenario:
1. User launches a VM from Template and keep it running
2. Admin logins and deleted that template [CloudPlatform does not check existing / running VM etc. while the deletion is done]
3. User resets the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
It throws error as
java.lang.RuntimeException: Job failed due to exception Resource [Host:11] is unreachable: Host 11: Unable to start instance due to can't find ready template: 209 for data center 1
at com.cloud.vm.VmWorkJobDispatcher.runJob(VmWorkJobDispatcher.java:113)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl$5.runInContext(AsyncJobManagerImpl.java:495)
Client is requesting better handing of this scenario. We need to check existing / running VM's when the template is deleted and warn admin about the possible issue that may occur.
REPRO STEPS
==================
1. Launches a VM from Template and keep it running
2. Now delete that template
3. Reset the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
EXPECTED BEHAVIOR
==================
Cloud platform should throw some warning message while the template is deleted if that template is being used by existing / running VM's
ACTUAL BEHAVIOR
==================
Cloud platform does not throw as waring etc.
Ran into an issue today where we passed both the "id" and "domainid" parameters into "listAccounts" and received a response despite the account id passed not belonging to the domainid passed.
Allow usage of "domainid" AND "id" in "listAccounts"
- Adding "AccountDoa::findActiveAccountById"
- Adding "AccountDaoImpl::findActiveAccountById"
- Removing seemingly pointless "listForDomain" parameter
- Updating "typeNEQ" value from "5" to "Account.ACCOUNT_TYPE_PROJECT"
(which is "5")
- Only attempt to load domain for "path" query parameter once
"searchForAccountsInternal" input validation logic pseudo-code:
- If "domainid" set, check immediately
- If "id" not set:
- and user is admin and "listall" is true
- if "domainid" not set, use caller domain id
- force "isrecursive" true
- else use caller account id
- Else if "domainid" and "name" set
- verify existence of account and that user has access
- Else:
- if "domainid" not set, locate account by "id"
- else, locate account by "id" and "domainid"
- verify account found and caller has access rights
Python base64 requires that the string is a multiple of 4 characters but
the Apache codec does not. RFC states is not mandatory so the data should
not fail the VR script (vmdata.py).
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This includes test related fixes and code review fixes based on
reviews from @rafaelweingartner, @marcaurele, @wido and @DaanHoogland.
This also includes VMware disk-resize limitation bug fix based on comments
from @sateesh-chodapuneedi and @priyankparihar.
This also includes the final changes to systemvmtemplate and fixes to
code based on issues found via test failures.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This moves the systevmtemplate migration logic from previous upgrade path
to 4.10.0.0->4.11.0.0 upgrade path.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In default/fresh installations, the guest os type for systemvms with id=15
or Debian 5 (32-bit) can cause memory allocation issues to guest. Using
Other Linux 64-bit as guest OS systemvms get all the allocated RAM. This
avoids OOM related kernel panics for certain VRs such as rVRs, lbvm etc.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes timezone issue where dates show up as nvalid in UI
- Introduces new event timeline listing/filtering of events
- Several UI improvements to add columns in list views
- Bulk operations support in instance list view to shutdown and destroy
multiple-selected VMs (limitation: after operation, redundant entries
may show up in the list view, refreshing VM list view fixes that)
- Align table thead/tbody to avoid splitting of tables
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactor cloud-early-config and make appliance specific scripts
- Make patching work without requiring restart of appliance and remove
postinit script
- Migrate to systemd, speedup booting/loading
- Takes about 5-15s to boot on KVM, and 10-30seconds for VMware and XenServer
- Appliance boots and works on KVM, VMware, XenServer and HyperV
- Update Debian9 ISO url with sha512 checksum
- Speedup console proxy service launch
- Enable additional kernel modules
- Remove unknown ssh key
- Update vhd-util URL as previous URL was down
- Enable sshd by default
- Use hostnamectl to add hostname
- Disable services by default
- Use existing log4j xml, patching not necessary by cloud-early-config
- Several minor fixes and file refactorings, removed dead code/files
- Removes inserv
- Fix dnsmasq config syntax
- Fix haproxy config syntax
- Fix smoke tests and improve performance
- Fix apache pid file path in cloud.monitoring per the new template
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows CloudStack administrators to create layer 2 networks on CloudStack. As these networks are purely layer 2, they don't require IP addresses or Virtual Router, only VLAN is necessary (provided by administrator or assigned by CloudStack). Also, network services should be handled externally, e.g. DNS, DHCP, as they are not provided by L2 networks.
As a consequence, a new Guest Network type is created within CloudStack: L2
Description:
Network offerings and networks support new guest type: L2.
L2 Network offering creation allows administrator to select Specify VLAN or let CloudStack assign it dynamically.
L2 Network creation allows administrator to specify VLAN tag (if network offerings allows it) or simply create network.
VM deployments on L2 networks:
VMs should not IP addresses or any network service
No Virtual Router deployed on network
If Specify VLAN = true for network offering, network gets implemented using a dynamically assigned VLAN
UI changes
A new button is added on Networks tab, available for admins, to allow L2 networks creation
At present, The management IP range can only be expanded under the same subnet. According to existing range, either the last IP can be forward extended or the first IP can be backward extended. But we cannot add an entirely different range from the same subnet. So the expansion of range is subnet bound, which is fixed. But when the range gets exhausted and a user wants to deploy more system VMs, then the operation would fail. The purpose of this feature is to expand the range of management network IPs within the existing subnet. It can also delete and list the IP ranges.
Please refer the FS here: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Expansion+of+Management+IP+Range
MySQLTransactionRollbackException is seen frequently in logs
Root Cause
Attempts to lock rows in the core data access layer of database fails if there is a possibility of deadlock. However Operations are not getting retried in case of deadlock. So introducing retries here
Solution
Operations would be retried after some wait time in case of dead lock exception.
When a template is copied back to zone after it is deleted. deleted field gets reset to null. delete field is added to Search on template zone mapping table to take care of the existing mapping.
Related 86bbe211f2 and CLOUDSTACK-494. Currently we can not have serveral VPCs in one account with different VPN customer gateways configuration per same gateway IP.
This commit adds support for passing IPv6 Addresses and/or Subnets as
Secondary IPs.
This is groundwork for CLOUDSTACK-9853 where IPv6 Subnets have to be
allowed in the Security Groups of Instances to we can add DHCPv6
Prefix Delegation.
Use ; instead of : for separating addresses, otherwise it would cause
problems with IPv6 Addresses.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Tags field to be included in the listusagerecords response such that it can be used in billing report. E.g.
"tags":[
{"key":"city","value":"Toronto","resourcetype":"UserVm","resourceid":"a0cca906-f985-4b56-ad11-f33e59c4c733","account":"admin","domainid":"dec39eb8-4f81-11e7-8315-067fa0000031","domain":"ROOT"}
,
{"key":"region","value":"canada","resourcetype":"UserVm","resourceid":"a0cca906-f985-4b56-ad11-f33e59c4c733","account":"admin","domainid":"dec39eb8-4f81-11e7-8315-067fa0000031","domain":"ROOT"}
- Migrate to embedded Jetty server.
- Improve ServerDaemon implementation.
- Introduce a new server.properties file for easier configuration.
- Have a single /etc/default/cloudstack-management to configure env.
- Reduce shaded jar file, removing unnecessary dependencies.
- Upgrade to Spring 5.x, upgrade several jar dependencies.
- Does not shade and include mysql-connector, used from classpath instead.
- Upgrade and use bountcastle as a separate un-shaded jar dependency.
- Remove tomcat related configuration and files.
- Have both embedded UI assets in uber jar and separate webapp directory.
- Refactor systemd and init scripts, cleanup packaging.
- Made cloudstack-setup-databases faster, using `urandom`.
- Remove unmaintained distro packagings.
- Moves creation and usage of server keystore in CA manager, this
deprecates the need to create/store cloud.jks in conf folder and
the db.cloud.keyStorePassphrase in db.properties file. This also
remove the need of the --keystore-passphrase in the
cloudstack-setup-encryption script.
- GZip contents dynamically in embedded Jetty
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* VSP ID Caching
* VSP call Statistics
* 5.0 Support
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Allow security policies to apply on port groups:
- Accepts security policies while creating network offering
- Deployed network will have security policies from the network offering
applied on the port group (in vmware environment)
- Global settings as fallback when security policies are not defined for a network
offering
- Default promiscuous mode security policy set to REJECT as it's the default
for standard/default vswitch
Portgroup vlan-trunking options for dvswitch: This allows admins to define
a network with comma separated vlan id and vlan
range such as vlan://200-400,21,30-50 and use the provided vlan range to
configure vlan-trunking for a portgroup in dvswitch based environment.
VLAN overlap checks are performed for:
- isolated network against existing shared and isolated networks
- dedicated vlan ranges for the physical/public network for the zone
- shared network against existing isolated network
Allow shared networks to bypass vlan overlap checks: This allows admins
to create shared networks with a `bypassvlanoverlapcheck` API flag
which when set to 'true' will create a shared network without
performing vlan overlap checks against isolated network and against
the vlans allocated to the datacenter's physical network (vlan ranges).
Notes:
- No vlan-range overlap checks are performed when creating shared networks
- Multiple vlan id/ranges should include the vlan:// scheme prefix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This implements a CloudStack Prometheus exporter as a plugin, that serves
metrics on a HTTP port.
New global settings:
1. prometheus.exporter.enable - (default: false), Enable the prometheus
exporter plugin, management server restart needed.
2. prometheus.exporter.port - (default: 9595), The prometheus exporter
server port.
3. prometheus.exporter.allowed.ips - (default: 127.0.0.1), List of comma
separated prometheus server ips (with no spaces) that should be allowed to
access the URLs.
The following list of metrics are provided per pop (zone) with the exporter:
• Per host:
o CPU cores: used, total
o CPU usage: used, total (in MHz)
o Memory usage: used, total (in MiBs)
o Total VMs running on the host
• CPU cores: allocated (per zone)
• CPU usage: allocated (per zone, in MHz)
• Memory usage: allocated (per zone, in MiBs)
• Hosts: online, offline, total
• VMs: in all states -- starting, running, stopping, stopped, destroyed,
expunging, migrating, error, unknown
• Volumes: ready, destroyed, total
• Primary Storage Pool: (Disk size) used, allocated, unallocated, total (in GiBs)
• Secondary Storage Pool: (Disk size) used, allocated, unallocated, total (in GiBs)
• Private IPs: allocated, total
• Public IPs: allocated, total
• Shared Network IPs: allocated, total
• VLANs: allocated, total
Additional metrics for the environment:
• Summed domain (level=1) limit for CPU cores
• Summed domain (level=1) limit for memory/ram
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Added ability to specify mac in deployVirtualMachine and
addNicToVirtualMachine api endpoints.
Validates mac address to be in the form of:
aa:bb:cc:dd:ee:ff , aa-bb-cc-dd-ee-ff , or aa.bb.cc.dd.ee.ff.
Ensures that mac address is a Unicast mac.
Ensures that the mac address is not already allocated for the
specified network.
Host-HA offers investigation, fencing and recovery mechanisms for host that for
any reason are malfunctioning. It uses Activity and Health checks to determine
current host state based on which it may degrade a host or try to recover it. On
failing to recover it, it may try to fence the host.
The core feature is implemented in a hypervisor agnostic way, with two separate
implementations of the driver/provider for Simulator and KVM hypervisors. The
framework also allows for implementation of other hypervisor specific provider
implementation in future.
The Host-HA provider implementation for KVM hypervisor uses the out-of-band
management sub-system to issue IPMI calls to reset (recover) or poweroff (fence)
a host.
The Host-HA provider implementation for Simulator provides a means of testing
and validating the core framework implementation.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new certificate authority framework that allows
pluggable CA provider implementations to handle certificate operations
around issuance, revocation and propagation. The framework injects
itself to `NioServer` to handle agent connections securely. The
framework adds assumptions in `NioClient` that a keystore if available
with known name `cloud.jks` will be used for SSL negotiations and
handshake.
This includes a default 'root' CA provider plugin which creates its own
self-signed root certificate authority on first run and uses it for
issuance and provisioning of certificate to CloudStack agents such as
the KVM, CPVM and SSVM agents and also for the management server for
peer clustering.
Additional changes and notes:
- Comma separate list of management server IPs can be set to the 'host'
global setting. Newly provisioned agents (KVM/CPVM/SSVM etc) will get
radomized comma separated list to which they will attempt connection
or reconnection in provided order. This removes need of a TCP LB on
port 8250 (default) of the management server(s).
- All fresh deployment will enforce two-way SSL authentication where
connecting agents will be required to present certificates issued
by the 'root' CA plugin.
- Existing environment on upgrade will continue to use one-way SSL
authentication and connecting agents will not be required to present
certificates.
- A script `keystore-setup` is responsible for initial keystore setup
and CSR generation on the agent/hosts.
- A script `keystore-cert-import` is responsible for import provided
certificate payload to the java keystore file.
- Agent security (keystore, certificates etc) are setup initially using
SSH, and later provisioning is handled via an existing agent connection
using command-answers. The supported clients and agents are limited to
CPVM, SSVM, and KVM agents, and clustered management server (peering).
- Certificate revocation does not revoke an existing agent-mgmt server
connection, however rejects a revoked certificate used during SSL
handshake.
- Older `cloudstackmanagement.keystore` is deprecated and will no longer
be used by mgmt server(s) for SSL negotiations and handshake. New
keystores will be named `cloud.jks`, any additional SSL certificates
should not be imported in it for use with tomcat etc. The `cloud.jks`
keystore is stricly used for agent-server communications.
- Management server keystore are validated and renewed on start up only,
the validity of them are same as the CA certificates.
New APIs:
- listCaProviders: lists all available CA provider plugins
- listCaCertificate: lists the CA certificate(s)
- issueCertificate: issues X509 client certificate with/without a CSR
- provisionCertificate: provisions certificate to a host
- revokeCertificate: revokes a client certificate using its serial
Global settings for the CA framework:
- ca.framework.provider.plugin: The configured CA provider plugin
- ca.framework.cert.keysize: The key size for certificate generation
- ca.framework.cert.signature.algorithm: The certificate signature algorithm
- ca.framework.cert.validity.period: Certificate validity in days
- ca.framework.cert.automatic.renewal: Certificate auto-renewal setting
- ca.framework.background.task.delay: CA background task delay/interval
- ca.framework.cert.expiry.alert.period: Days to check and alert expiring certificates
Global settings for the default 'root' CA provider:
- ca.plugin.root.private.key: (hidden/encrypted) CA private key
- ca.plugin.root.public.key: (hidden/encrypted) CA public key
- ca.plugin.root.ca.certificate: (hidden/encrypted) CA certificate
- ca.plugin.root.issuer.dn: The CA issue distinguished name
- ca.plugin.root.auth.strictness: Are clients required to present certificates
- ca.plugin.root.allow.expired.cert: Are clients with expired certificates allowed
UI changes:
- Button to download/save the CA certificates.
Misc changes:
- Upgrades bountycastle version and uses newer classes
- Refactors SAMLUtil to use new CertUtils
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes issue of enabling dynamic roles based on the global setting
only. This also fixes application of the default role/permissions mapping
on upgrade from 4.8 and previous versions to 4.9+.
Previously, it would make additional check to ensure commands.properties
is not in the classpath however this creates confusion for admins who
may skip/skim through the rn/docs and assume that mere changing the
global settings was not enough.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows changing permission for existing role permissions, as those were static and could not be changed once created. It also provides the ability to change these permissions in the UI using a drop down menu for each permission rule, in which admin can select ‘Allow’ or ‘Deny’ permission.
Changes in the API:
This feature modifies behaviour of updateRolePermission API method:
New optional parameters ‘ruleid’ and ‘permission’ are introduced, they are mutual exclusive to ‘ruleorder’ parameter. This defines two use cases:
Update role permission: ‘ruleid’ and ‘permission’ parameters needed
Update rules order: ‘ruleorder’ parameter needed
Parameter ‘ruleorder’ is now optional
updateRolePermission providing ‘ruleorder’ parameter should be sent via POST
CloudStack has several background polling tasks that are spread across
the codebase, the aim of this work is to provide a single manager to
handle submission, execution and handling of background tasks. With
the framework implemented, existing oobm background task has been
refactored to use this manager.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
removed code which nullifies vm_instance_id
Also modified QueryManagerImpl to ignore volume which does not have uuid. This is to avoid duplicate volume listing.
(cherry picked from commit 3cced927c4)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In case of vmware host failure, all the VMs including stopped VMs migrate
to the new host. For the Stopped Vms powerhost gets updated. This was
triggering HandlePowerStateReport which finally calls updatePowerState
updating update_time for the VM. This cause the capacity being reserved
for stopped VMs.
(cherry picked from commit 9d268c8cd5)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Update the volume id in volume_store_ref table to newly created volume for migration
(cherry picked from commit 42b89278e9)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit contains following changes
(1) add CPU CORE information in op_host_capacity
(2) add capacity name in the CapacityResponse
(3) add allocatedCapacity for CPU/MEMORY/CPU CORE for zones
(4) sort CapacityResponse by zonename and CapacityType
CLOUDSTACK-9669:egress destination cidr VR python script changes
CLOUDSTACK-9669:egress destination API and orchestration changes
CLOUDSTACK-9669: Added the ipset package in systemvm template
CLOUDSTACK-9669:Added licence header for new files
CLOUDSTACK-9669: replacing 0.0.0.0/0 with the network cidr
ipset member add with 0.0.0.0/0 fails. So 0.0.0.0/0 replaced with the network cidr.
In source cidr 0.0.0.0/0 is nothing but network cidr.
updated the default egress all cidr with network cidr
A root volume can be replaced by a different root volume without the VM it belongs to being expunged.
From dev@:
For example: Let’s say we have a system VM running on NFS primary storage. We then put this primary storage into maintenance mode, which creates the system VM (with the same name) on a different primary storage (we do not create a new row in the cloud.vm_instance table for this VM). While this VM works, the original root disk of the system VM remains on the original primary storage and is not destroyed by the code in StorageManagerImpl.cleanupStorage(boolean) in 4.10 because 4.10 (as shown above) only asks for non-root volumes to consider for deletion. In the 4.9 version of the code, the original root disk is cleaned up in StorageManagerImpl.cleanupStorage(boolean). The problem with 4.10 relying on a root disk always being deleted when the VM it belongs to is deleted is that in a situation like this that the system VM doesn’t get deleted at this point – it gets a new root disk that’s hosted by a different primary storage (so now it’s original root disk is stranded).
1. Removed XenServerGuestOsMemoryMap from CitrixHelper.java
This java file was holding a static in memory map named XenServerGuestOsMemoryMap. This was the source for xenserver dynamic memory values(max and min). These values were moved to guest_os_details table.
2. DAO layer was modified to access these values.
3. VirtualMachineTo object was modified to populate the dynamic memory values.
4. addGuestOs and UpdateGuestOS api has been modified to update memory values.
removed code which nullifies vm_instance_id
Also modified QueryManagerImpl to ignore volume which does not have uuid. This is to avoid duplicate volume listing.
[4.10-blocker] Fix error in restart network in 4.10.0.0 RCThe PR fixes the error in restart network:
2017-04-04 10:27:39,217 DEBUG [c.c.n.r.NetworkHelperImpl] (API-Job-Executor-2:ctx-08904854 job-29417 ctx-3405d3f2) (logid:19bbd6e6) Router requires upgrade. Unable to send command to router:9784, router template version : Cloudstack Release 4.10.0 Wed Feb 15 05:42:18 UTC 2017, minimal required version : 4.10.0.0
It works after changing minreq.sysvmtemplate.version from 4.10.0.0 to 4.10.0
* pr/2025:
Fix error in restart network in 4.10.0.0 RC
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
There are some VM deployment failures happening when multiple VMs are deployed at a time, failures mainly due to NetworkModel code that iterates over all the vlans in the pod. This causes each deployVM thread to hold the global lock on Network longer and cause delays. This delay in turn causes more threads to choose same host and fail since capacity is not available on that host.
Following are some changes required to be done to reduce delays during VM deployments which in turn causes some vm deployment failures when multiple VMs are launched at a time.
In Planner, remove the clusters that do not contain a host with matching service offering tag. This will save some iterations over clusters that dont have matching tagged host
In NetworkModel, do not query the vlans for the pod within the loop. Also optimized the logic to query the ip/ipv6
In DeploymentPlanningManagerImpl, do not process the affinity group if the plan has hostId provided.
In case of vmware host failure, all the VMs including stopped VMs migrate
to the new host. For the Stopped Vms powerhost gets updated. This was
triggering HandlePowerStateReport which finally calls updatePowerState
updating update_time for the VM. This cause the capacity being reserved
for stopped VMs.
CLOUDSTACK 9601: Upgrade: change logic for update path for filesFor going from version A to version D, it uses to run the SQL files in
that order: A -> B -> C -> D -> A-cleanup -> B-cleanup -> C-cleanup ->
D-cleanup. If you had upgraded each version separatively you would have
run A -> A-cleanup -> B -> B-cleanup -> C -> C-cleanup -> D ->
D-cleanup.
This change the logic to follow the same path if you are jumping over
versions.
Signed-off-by: Marc-Aurle Brothier <m@brothier.org>
* pr/1768:
Upgrade: change logic for update path for files
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This improves the metrics view feature by improving the rendering performance
of metrics view tables, by reimplementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9660: NPE while destroying volumes during 1000 VMs deploy and destroy tests
NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle
only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
* pr/1825:
CLOUDSTACK-9660: NPE while destroying volumes during 1000 VMs deploy and destroy tests NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
For going from version A to version D, it uses to run the SQL files in
that order: A -> B -> C -> D -> A-cleanup -> B-cleanup -> C-cleanup ->
D-cleanup. If you had upgraded each version separatively you would have
run A -> A-cleanup -> B -> B-cleanup -> C -> C-cleanup -> D ->
D-cleanup.
This change the logic to follow the same path if you are jumping over
versions.
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
CLOUDSTACK-9766 : Executing deleteSnapshot api with already deleted sIf we try to delete the snapshot which is already deleted, then no proper error appears in the log and it just try to delete the snapshot which is already deleted.
Steps to reproduce :
-------
1-create a snapshot
2-delete the snapshot
3-try to delete snapshot which is deleted in step 2
Expected Result
-------------
Result should show proper error message. Request for deleting already deleted snapshot should not be placed.
* pr/1924:
CLOUDSTACK-9766 : Executing deleteSnapshot api with already deleted snapshot does not throw any exception or failure message
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9574: Redesign storage views## Part 1: Redesign storage tags
### Actual behavior
Primary storage tags are being saved as an entry on `storage_pool_details` with:
* name = TAG_NAME
* value = "true"
When a boolean property is defined in {{storage_pool_details}} and has value = "true", it is displayed as a tag.
### Goal
Redesign `Storage Tags` for Primary Storage view, to list only tags, as it is done in Host Tags (Hosts view).
## Part 2: Remove details from listImageStores API call response and UI
### Description
In Secondary Storage view we propose removing `Details` field, as `Setting` tab list details for a given image store. We also remove details from response on `listImageStores` API method
* pr/1747:
CLOUDSTACK-9574: Redesign storage tags and remove details from listImageStores response and UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9456: Migrate master to Spring 4.xThis changes makes CloudStack use spring 4:
```
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK7
- Bump servet dependency version
- Migrates various xmls to use version independent schema uris
```
Outstanding issue:
- Testing of various non-standard plugins such as network and storage plugins etc.
Since, this is a big change pinging for review -- @jburwell @karuturi @wido @murali-reddy @abhinandanprateek @DaanHoogland @GaborApatiNagy @JayapalUradi @kishankavala @K0zka @nvazquez @rafaelweingartner @pyr and others
@blueorangutan package
* pr/1638:
CLOUDSTACK-9456: Update Spring version in maven poms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9597: Should not fetch resource count for removed entityFetch the number of resourceCount by domain and account excluding the removed ones.
Signed-off-by: Marc-Aurle Brothier <m@brothier.org>
* pr/1764:
CLOUDSTACK-9597: Should not fetch resource count for removed entity
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Rvr Network with cleanup which is updated from the isolated network is failed.
Corrected the column name string issue.
This closes#1781
(cherry picked from commit 0f742e1723)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Paul Angus
Rohit Yadav
Bitworks LLC
Rohit Yadav
Mike Tutkowski
Gabriel Beims Bräscher
Kui LIU
Frank Maximus
Nicolas Vazquez
Khosrow Moossavi
Rafael Weingärtner
lzh3636
SowjanyaPatha
ernjvr
dahn
Paul Angus
Daan Hoogland
Daan Hoogland
Mike Tutkowski
brett
lzh3636
Marc-Aurèle Brothier
Abhinandan Prateek
jayakarteek
mrunalinikankariya
Mowgli
Daniel Carbone
Sigert Goeminne
Sigert Goeminne
Nitin Kumar Maharana
subhash yedugundla
René Moser
Wido den Hollander
Frank Maximus
Rohit Yadav
Harika Punna
Nathan Johnson
sureshanaparti
Nitesh Sarda
Wei Zhou
Sudharma Jain
Sudhansu
Sudhansu
SudharmaJain
Anshul Gangwar
Wei Zhou
Nitin Kumar Maharana
Priyank Parihar
Rajesh Battala
Rajani Karuturi
Rajani Karuturi
Jayapal
Bharat Kumar
Kishan Kavala
Rajani Karuturi
Harikrishna Patnala
nvazquez
Jayapalu
