CLOUDSTACK-9238: Fix URL length to 2048 for all url fields in VOI will update the PR to add max field length in the API commands too
* pr/1567:
API: update url field max length
not needed on host table
Fix URL length to 2048 for all url fields in VO
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.7:
Fix Sync of template.properties in Swift
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
CLOUDSTACK-9265 cleanup around httpclient versionssome cleanup done
- replaced HttpStatus from org.apache.commons.httpclient with that from org.apache.http
- removed unthrown HttpException
- left auto reformat in place
* pr/1385:
CLOUDSTACK-9265 cleanup around httpclient versions
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Snapshot removing implemented on RBD.
1. On management side: when created new shanpshot we checking if our primary storage is RBD,
then do not remove record from cloud.snapshot_store_ref with link to Ceph
image via 'install_path' field.
2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'.
3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
Fixed return type Void to void in DataMotionStrategy.The main changes are:
- Changing methods Void to void.
- Removal of the method Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback<CopyCommandResult> callback) that was
never used.
We noticed that methods form that class are using the return type Void
with capital V. This way that method has to return a null value at the
end.
Removed trim lines from XenServerStorageMotionStrategy.
The trim lines were removed from XenServerStorageMotionStrategy.
* pr/969:
Changed return of methods from DataMotionStrategy, Void to void
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The main changes are:
• Changing methods “Void” to “void”.
• Removal of the method “Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback callback)” that was never used. We
noticed that methods form that class are using the return type Void with
capital V. This way that method has to return a null value at the end.
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
CLOUDSTACK-8964: Can't create volume from snapshot of a removed volumeThis issue happens on KVM as well.
This is because the volume info is missing in the CopyCommand once the volume has been removed.
When the KVM agent tries to process the command, it will throws a NPE.
* pr/976:
CLOUDSTACK-8964: Can't create volume from snapshot of a removed volume
Signed-off-by: Remi Bergsma <github@remi.nl>
This issue happens on KVM as well.
This is because the volume info is missing in the CopyCommand once the volume has been removed.
When the KVM agent tries to process the command, it will throws a NPE.
Guys, can you review it? things need to be discussed:
(1) this supports KVM/QCOW2 only. Anyone want to implement for other Hypervisor/format ?
(2) The original data volume (on primary storage) will be removed.
(3) The script uses the default timeout in libvirtComputingResource. Do we need to add one in global configuration (like copy.volume.wait or backup.snapshot.wait, create.volume.from.snapshot.wait)
(4) In scripts/storage/qcow2/managesnapshot.sh, I use "qemu-img convert -f qcow2 -O qcow2" to copy the snapshot from secondary to primary (hence there is no base image file), instead of "cp -f", this is because convert is faster than cp in my testing.
* pr/732:
CLOUDSTACK-5863: revert volume snapshot for KVM/QCOW2
Signed-off-by: Wei Zhou <w.zhou@tech.leaseweb.com>
This reverts commit cd7218e241, reversing
changes made to f5a7395cc2.
Reason for Revert:
noredist build failed with the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.2:compile (default-compile) on project cloud-plugin-hypervisor-vmware: Compilation failure
[ERROR] /home/jenkins/acs/workspace/build-master-noredist/plugins/hypervisors/vmware/src/com/cloud/hypervisor/guru/VMwareGuru.java:[484,12] error: non-static variable logger cannot be referenced from a static context
[ERROR] -> [Help 1]
even the normal build is broken as reported by @koushik-das on dev list
http://markmail.org/message/nngimssuzkj5gpbz
This patch makes it possible to expose VM UUID to subsystems, this can be
useful for implementing VM Snapshots for KVM in future.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This reverts commit 180afe52e5.
This broke the build on master:
master build broken with the below error http://jenkins.buildacloud.org/job/build-master-slowbuild/2101/consoleText
```
[INFO] -------------------------------------------------------------
[ERROR] COMPILATION ERROR :
[INFO] -------------------------------------------------------------
[ERROR] /home/jenkins/acs/workspace/build-master-slowbuild/plugins/hypervisors/xenserver/test/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixRequestWrapperTest.java:[1581,51] error: constructor CreateVMSnapshotCommand in class CreateVMSnapshotCommand cannot be applied to given types;
[ERROR] required: String,String,VMSnapshotTO,List<VolumeObjectTO>,String
found: String,VMSnapshotTO,List<VolumeObjectTO>,String
reason: actual and formal argument lists differ in length
/home/jenkins/acs/workspace/build-master-slowbuild/plugins/hypervisors/xenserver/test/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixRequestWrapperTest.java:[1623,53] error: no suitable constructor found for RevertToVMSnapshotCommand(String,VMSnapshotTO,List<VolumeObjectTO>,String)
[INFO] 2 errors
[INFO] -------------------------------------------------------------
```
This was PR #717 towards 4.5
This patch makes it possible to expose VM UUID to subsystems, this can be
useful for implementing VM Snapshots for KVM in future.
This was PR #717 towards 4.5
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 0062ff2672)
Signed-off-by: Remi Bergsma <github@remi.nl>
* pr/547:
CLOUDSTACK-8601. VMFS storage added as local storage can be re-added as shared storage. Fail addition of a VMFS shared storage pool in case it has already been added as local storage in CS.
Signed-off-by: Mike Tutkowski <mike.tutkowski@solidfire.com>
As part of volume sync, that runs during of SSVM start-up, the volume_store_ref entry was getting deleted. Volume GC relies on this entry to move volume to destroyed state.
Since the entry was getting deleted, GC thread never moved the volume from UploadError/UploadAbandoned to Destroyed. Fix is to not remove the volume_store_ref entry as part
of volume sync and let GC thread handle the clean up.
This closes#611
The volume is already deleted (may be by the cleanup thread) and hence
the NPE. Added a not null check for the volumevo and returning false
from the state transition
This closes#321
... of new volumes. Following changes are implemented 1. Disable or enable a pool with the
updateStoragePool api. A new 'enabled' parameter added for the same. 2. When a
pool is disabled the state of the pool is updated to 'Disabled' in the db. On
enabling it is updated back to 'Up'. Alert is raised when a pool is disabled or
enabled. 3. Updated other storage providers to also honour the disabled state.
4. A disabled pool is skipped by allocators for provisioing of new volumes. 5.
Since the allocators skip a disabled pool for provisioning of volumes, the
volumes are also not listed as a destination for volume migration.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Disabling+Storage+Pool+for+Provisioning
This closes#257
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Removes awsapi db properties usage across codebase
- Removes references from spring xmls, test cases and TransactionLegacy
- Adds sql command to drop database cloudbridge in schema-451to460-cleanup.sql
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Correctly update the status of an uploaded volume upon failure to attach it to a VM.
(cherry picked from commit 10a106f5d8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
inconsistent state (NotUploaded or UploadInProgress) and doesn't transition to any terminal
state (Uploaded, Uploaded). As a result these volumes/templates cannot be removed. Fix is to handle such
volume/template entries correctly.
Set destination volume path as NULL while duplicating volume during migration.
If migration fails, destination volume will be marked as removed. And if migration succeeds, volume path will be rightly updated.
(cherry picked from commit d30d5644bb)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The copy command reply can have null size returned, so check and set values
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 53ca0b1861)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Set destination volume path as NULL while duplicating volume during migration.
If migration fails, destination volume will be marked as removed. And if migration succeeds, volume path will be rightly updated.
Update volume chain_info to NULL during cold migration.
Otherwise during VM start, CCP will configure and try to power-on the VM with wrong disk information.
(cherry picked from commit 7b32b8a268)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fixed the following:
- Destroying volume in 'UploadAbandoned' state resulted in NPE
- Existing upload volume functionality interfered with this, added proper checks to prevent that
While taking a snapshot of a volume, CS chooses the endpoint to perform backup snapshot operation by selecting any host that has the storage containing the volume mounted on it.
Instead, if the volume is attached to a VM, the endpoint chosen by CS should be the host that contains the VM.
(cherry picked from commit a75a431373)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When we download volume then we create entry in volume_store_ref table.
We mark the volume entry to ready state once download_url gets generated.
When we migrate that volume, then again one more entry is created with same volume id.
Its state is marked as allocated. Later we try to list only one dataobject in datastore
for state transition during volume migration. If the listed volume's state is allocated
then migration passes otherwise it fails.
Below fix will remove the randomness and give priority to volume entry which is made for
migration (download_url/extracturl will be null in case of migration). Giving priority to
download volume case is not needed as there will be only one entry in that case so no randomness.
Update volume chain_info to NULL during cold migration.
Otherwise during VM start, CCP will configure and try to power-on the VM with wrong disk information.
While taking a snapshot of a volume, CS chooses the endpoint to perform backup snapshot operation by selecting any host that has the storage containing the volume mounted on it.
Instead, if the volume is attached to a VM, the endpoint chosen by CS should be the host that contains the VM.
on calling GetUploadParamsForVolume, persisting the metadata to db
validating the account limits and incrementing the appropriate limits
encoded the metadata on management server using preshared key
When a template a copied from a secondary to primary, we were trying to release a lock
twice, once in the create/copy base image function and in the create/copy base image
complete callback routine. This caused the exception as reported in the bug. Fixed by
updating the code make sure we release the lock in copy base image function only as
this is the place we took acquired the lock.
Also when the ssvm is destroyed all the download urls are expired to be cleaned up in the next run by the new ssvm.
(cherry picked from commit ce90837357)
While expunging a volume, CS chooses the endpoint to perform delete operation by selecting any host that has the storage containing the volume mounted on it.
Instead, if the volume to be deleted is attached to a VM, the endpoint chosen by CCP should be the host that contains the VM.
(cherry picked from commit f1e3e83bbf)
While expunging a volume, CS chooses the endpoint to perform delete operation by selecting any host that has the storage containing the volume mounted on it.
Instead, if the volume to be deleted is attached to a VM, the endpoint chosen by CCP should be the host that contains the VM.
to support IOPS capacity control in a cluster wide storage pool and a
local storage pool
to enable hypervisor type check, storage type check for root volume and
avoid list check
Since original commit(31de58edab) contained
a bug, it was reverted and this commit is a revised one.
to support IOPS capacity control in a cluster wide storage pool and a
local storage pool
to enable hypervisor type check, storage type check for root volume and
avoid list check
1. Adding the missing Template/Volume URLs expiration functionality
2. Improvement - While deleting the volume during expiration use rm -rf as vmware now contains directoy
3. Improvement - Use standard Answer so that the error gets logged in case deletion of expiration link didnt work fine.
4. Improvement - In case of domain change, expire the old urls
with hostid included was passed to the local storage pool allocator, it returned all the local
storage pools in the cluster, instead of just the local pool on the given host in the plan.
This was happening the search at a host level was happening only for data disk. Fixed this.
Additionally, the query to list the storage pools on a host was failing if the pool did have
tags. Fixed the query too.
CLOUDSTACK-6802: Fix for not being able to attach data disk on local. This issue gets fixed
with the above issue too. The query to list pools on a host was failing if there were no
tags on the storage pool.
the folder column. For an smb share the smb credentials are in the query string of the path.
Before adding the path, smb shares query string should be cleaned up.
template is downloading, template_store_ref has leftover not in ready
state, when create vm from that template, the code doesn't check either
zone id, nor template_store_ref state.
Conflicts:
engine/orchestration/src/org/apache/cloudstack/engine/orchestration/VolumeOrchestrator.java
storage pool (SMB) and attached to a running vm can be live migrated to another shared storage
pool. Also a vm and its volumes can be live migrated to another host and storage pool respectively.
2) Corrected some logging in MidoNetPublicNetworkGuru - removed .toString method call on the objects in the log body as toString is called on the object by default when use log4j
Moving default transport for console proxy, SSVM to http.
See
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Realhost+IP+changes
for more info.
jlk ported Amogh's patch for 4.3 to master - code base is different
enough that patch has multiple issues.
Author: Amogh Vasekar <Amogh Vasekar <amogh.vasekar@citrix.com>
Signed-off-by: John Kinsella <jlk@stratosec.co> 1394398017 -0700
encoded. This cause createStoragePool or addImageStore command to fail if special
characters were present. Updated the code to pass user, password and domain as part
of details while adding primary or secondary. Also made changes on server side to
handle it.
Will Stevens
Marc-Aurèle Brothier
Nick Livens
nvazquez
Mike Tutkowski
Syed
Daan Hoogland
Dmytro Shevchenko
SudharmaJain
weingartner
Rohit Yadav
Remi Bergsma
Wei Zhou
cirstofolini
Boris Schrijver
Rajani Karuturi
Sanjay Tripathi
Likitha Shetty
Daan Hoogland
Koushik Das
Hiroki Ohashi
Rajani Karuturi
Devdeep Singh
Santhosh Edukulla
Damodar
Nitin Mehta
Min Chen
Abhinandan Prateek
Anshul Gangwar
Laszlo Hornyak
Edison Su
Prachi Damle
Hugo Trippaers
Kishan Kavala
Bharat Kumar
Anthony Xu
amoghvk
ynojima
Funs
Tim Mackey
Saksham Srivastava
Ding Yuan
Marcus Sorensen
Chris Suich
Alex Hitchins
Alena Prokharchyk
John Kinsella
Prachi Damle