* add dedicated resource response
* populate dedicatedresources field
* change affinity group name and description when it contains dedicated resources
* display dedicatedresources on UI
* add end of line to DedicatedResourceResponse class
* remove unnecessary fully qualified names
This introduces the multi-arch zones, allowing users to select the VM arch upon deployment.
Multi-arch zone support in CloudStack can allow admins to mix x86_64 & arm64 hosts within the same zone with the following changes proposed:
- All hosts in a clusters need to be homogenous, wrt host CPU type (amd64 vs arm64) and hypevisor
- Arch-aware templates & ISOs:
- Add support for a new arch field (default set of: amd64 and arm64), when unspecified defaults to amd64 and for existing templates & iso
- Allow admins to edit the arch type of the registered template & iso
- Arch-aware clusters and host:
- Add new attribute field for cluster and hosts (kvm host agents can automatically report this, arch of the first host of the cluster is cluster's architecture), defaults to amd64 when not specified
- Allow admins to edit the arch of an existing cluster
- VM deployment form (UI):
- In a multi-arch zone/env, the VM deployment form can allow some kind of template/iso filtration in the UI
- Users should be able to select arch: amd64 & arm64; but this is shown only in a multi-arch zone (env)
- VM orchestration and lifecycle operations:
- Use of VM/template's arch to correctly decide where to provision the VM (on the correct strictly arch-matching host/clusters) & other lifecycle operations (such as migration from/to arch-matching hosts)
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR contains 3 features
- IPv4 Static Routing (Routed mode) #9346
Design document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=306153967
- AS Numbers Management #9410
Design Document: https://cwiki.apache.org/confluence/display/CLOUDSTACK/BGP+AS+Numbers+Management
- Dynamic routing
Design Document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=315492858
- Document: https://github.com/apache/cloudstack-documentation/pull/419
Rename nsx mode to routing mode
by
```
git grep -l nsx_mode |xargs sed -i "s/nsx_mode/routing_mode/g"
git grep -l nsxmode |xargs sed -i "s/nsxmode/routingmode/g"
git grep -l nsxMode |xargs sed -i "s/nsxMode/routingMode/g"
git grep -l NsxMode |xargs sed -i "s/NsxMode/RoutingMode/g"
```
- re-organize sql changes
- fix NPE as rules do not have public ip
- fix missing destination cidr in ingress rules
- disable network usage for routed network
- fix DB exception as network_id is -1 during network creation
- apply ingress/egress routing rules
- VR changes to configure nft rules for isolated network
- VR: setup nft rule for control network
- VR: flush all iptables rules
- fix NPE which is because ingress rules do not have public ip associated
- fix dest cidr is missing in nft tables
- add ip4 routing and ip4 routes to list network and list vpc response
- fix ingress rule is missing when vr is restarted
- fix icmp types in nft rules
- add tab to manage routing firewall rules
- fix ingress rules are not applied when VR is restarted
- add default rules in FORWARD chain
- fix create vpc offerings
- fix public ip is not assigned to vpc
- fix network offering is not listed when create vpc tier
- add is_routing to boot args of vpc vr
- remove table ip4_firewall in vpc vr
- release or remove subnet when remove a network
- implemenent fw_vpcrouter_routing
- fix wrong ip familty when flush ipv4 rules
- fix acl rules are not applied due to wrong version (should be 6 which means ip6 rules are removed)
- add default rules for vpc tiers so that tcp connections (e.g. ssh) work
- append policy rules after default rules
- remove /usr/local/cloud/systemvm/ in routers
- throw an exception when allocate subnet with cidrsize
- fix some TODOs
- add new parameters to update API
- return type Ipv4GuestSubnetNetworkMap when get or create subnet
- fix firewall rules are broken
- add domain_id and account_id to db
- add domain/account/project to ipv4 subnet response
- create ipv4 subnet for domain/account/project
- check conflict when update ipv4 subnet
- ui changes
- add parent subnet to response
- add list for ipv4 subnet
- implement some methods
- fix list subnets for guest networks by zoneid
- UI changes
- fix delete ipv4 subnet for network
- fix ipv4 subnet is set to zone guest network cidr if cidrsize is specified
- add zone info to response if parent subnet is null but network is not
- fix gateway/cidr is not set when create network with cidrsize
- fix order of nft rules in the VRs
* Routed v24
- add classes in marvin base.py
* Routed v25
- add test_01_subnet_zone
- fix dedicate to domain/account failure
- list subnets for network by keyword and subnet
* Routed v26: implement subnet auto-allocation
- add utils for split ip ranges into small subnets
- add utils to get start/end ip of a cidr
- implement subnet auto-generation
- add global settings
* Routed 27: add subnet for VPC
- add db column for vpc_id
- add db record for vpc
- remove db record when delete a vpc
- add checkConflicts methods
- remove duplicated settings
- check ipv4 cidr when create subnet
* Routed v28: update smoke tests
- update test_ipv4_routing.py
- search subnets by networkid
* Routed 29: fix vpc and add more tests
- fix createnetwork in vpc
- add vpc id/name to response
- fix zone id/name are not displayed in some cases
- add smoke test for vpc
- add smoke tests for failed cases
- add smoke test for connectivity checks
- marvin: add "-q" to ssh command
* Routed 31: ui and smoke tests
- UI: add link to network in list view
- add nftables rules check in VRs
* Routed 32: add chain OUTPUT and more rules
- fix the issue 80/443/8080 is not reachable from VR itself
```
2024-06-27 10:21:52,121 INFO Executing: systemctl start cloud-password-server@172.31.1.1
2024-06-27 10:21:52,128 INFO Service cloud-password-server@172.31.1.1 start
2024-06-27 10:21:52,129 INFO Executing: ps aux
2024-06-27 10:24:02,175 ERROR Failed to update password server due to: <urlopen error [Errno 110] Connection timed out>
```
* Routed: fix dns search from VMs in Isolated networks
* Routed: fix VPC dns issue due to gateway IP is missing in cloud.conf
This is caused by NSX integration, and fixed by
https://github.com/apache/cloudstack/pull/9102/
* Routed: rename routing_mode to network_mode
* Routed: replace centos5.5 template in smoke test as dhclient does not work in the vms
// this does not work
refer to https://dominikrys.com/posts/disable-udp-checksum-validation/#ignoring-udp-checksums-with-nftables
and
https://forum.openwrt.org/t/udp-checksum-with-nftables/161522/11
the vm should have checksum offloading disabled
* Routed: fix smoke test due to wrong cidrlist of egress rules and missing ingress rule from VR
* PR 9346: fix lint error schema-41910to42000.sql
* PR 9346: ui polish v1
* PR 9346: create VPC with cidrsize
* Routed: fix test failures with test_network_ipv6 and test_vpc_ipv6 due to 'ssh -q'
* Routed: fix /usr/local/cloud/systemvm/ are removed after SSVM/CPVM reboot
* Routed: fix IP of additional nics of VPC VR is not gateway
* PR 9346: fix cidrsize check when create VPC with cidrsize
* Routed: fix test/integration/smoke/test_ipv4_routing.py:279:16: E713 test for membership should be 'not in'
* PR9346: fix/Update api
* PR 9346: set response object name
* PR9346: UI refactor and small fixes
* PR9346: change return type of getNetworkMode
* PR9346: move IPv4 subnet to seperated tab
* PR9346: revert IpRangesTabGuest.vue back to original
* PR9346: fix remove ipv4 subnet on UI
* PR9346: fix test_ipv4_routing.py
* AS Number Range Management
* Create AS Number Range for a Zone
* Fix build
* Add ListASNRange and fix create ASN range
* Add List AS numbers
* Add UI for AS Numbers
* Fix UI and filter AS Numbers
* Add AS Number on Isolated network creation and refactor UI and response
* Release AS Number
* Add network offering new columns
* Add UI support to view and add AS number and configure network offering
* Automatically assign AS Number if not specify AS number
* update variable name
* Fix routing mode check
* UI: Only allow selecting AS number when routing mode is Dynamic and specifyAsNumber is true
* UI: Only pass AS number when supported by the network offering
* Release AS number on network deletion
* Add deleteASNRange command (#81)
* API: List ASNumbers by asnumber (#83)
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* AS number management extensions
* Support AS number on VPC tier creation based on the offering
* Fix delete AS Range
* Fix UI values
* UI: Minor fix for releasing AS number
* UI: Move management of AS Range to Zone details view
* Fix specify_as_number column in network_offering table to set the default false
* Add events for AS number operations
* Allow users to list AS Numbers and fix network form for Normal users
* Add AS number details to list networks response
* Fix Allocated time format
* Fix Allocated time format
* support in details view too
* Fix: Do not release AS number if acquired network requires AS number
* Fix: Do not release AS number if acquired network requires AS number
* Fix typo
* Fix allocated release
* Fix event type
* UI: Add Routing mode and Specify AS to the network offering details
* UI: Add Routing mode and Specify AS to the network offering details
* Address comment
* Fix release AS number of network deletion
* Fix release AS number of network deletion
* Fix
* Restore release to its place based on the boolean
* Rename boolean
* API: Add networkId as listASNumber parameter
* Add Network name to the search view filter for AS numbers
* Present allocated time in human readable format - Pubilc IP / AS Numbers
* Add account / domain filter for AS numbers
* Add support for AS numbers on VPC offerings
* Refactor AS number allocation to VPC and non VPC isolated networks
* Checkstyle
* Add support for AS numbers on VPC offerings
* extend vpc offering view and vpcoffering response
* merge https://github.com/shapeblue/cloudstack-playtika/pull/115 and change network_id of as_numbers to include vpc_id
* Display AS number of VPC tiers as the AS number of the VPC
* extend asnumber response and ui support
* improve UI and as number response to view VPC details
* List only dynamic offerings for vpc tiers with specify as numbers
* Fix release AS number
* Fix AS number displayed as 0 when no AS number assigned
* Fix VPC offering creation without specify AS
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix release AS number on VPC deletion
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Fix missing column on asnumber table
* Fix listASNumbers API to support vpcid and obtain AS number from vpc for tiers
* Prevent listing 0 AS number for VPC
* Fix create Isolated Network form
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Dynamic: move routingmode/specifyasn after networkmode in AddNetworkOffering.vue on UI
* Dynamic: fix ip4routing in network response
* Dynamic/systemvm: add FRR to systemvm template
* Dynamic: BGP peers (DB,VO,Dao)
* Dynamic: BGP peers (VR/server)
* Dynamic: v3
- remove BgpPeer class
- fix vpc vr has bgp peers of only 1 tier
- rename ip4_cidr to guest_ip4_cidr
- rename ip6_cidr to guest_ip6_cidr
- generate /etc/frr/frr.conf
- apply BGP peers on Dynamic-Routed network even if there is no BGP peers
* Dynamic v4: fix vpc vr
- fix duplicated guest cidr in frr.conf in vpc vr
todo
- restart frr / reload frr (reload will cause bgp session to Policy state)
- apis for bgp peers
- assign/release bgp peer from/to network
* Dynamic v5: add apis for bgp peers
* Dynamic v6: fix bugs
- set response object name
- remove required as number when update
- fix checks when update
- allow regular users to list bgp peers
* Dynamic v7: move apis to bgp sub-dir
* Dynamic v8: add tab for manage BGP peers on UI
* Dynamic v9: fix update bgp with same config
* Dynamiv v10: add changeBgpPeersForNetworkCmd
* Dynamic v11: create network with bgppeerids
- create network with bgppeerids
- add marvin classes
- add smoke tests
- remove uuid from bgp_peer_network_map
- fix created/removed in bgp_peer_network_map
- remove bgppeers when remove a network
- UI: fix delete bgp peer
* Dynamic v12: add test for vpc tiers
* Dynamic v13: bug fixes
- fix change BGP peers for network in Allocated state
- fix listing network returns removed record
- fix all vpc tiers have the same settings
- remove BGP peers as part of network removal
- remove FRR settings for vpc tiers without any BGP peers
- UI: fix no error msg when change BGP peers
* Dynamic v14: assign BGP Peers for VPC instead of VPC tiers
- create vpc with bgppeerids
- do not allow create/update vpc tier with bgppeerids
- apply all bgp peers when create/delete a vpc tier
- UI: change bgp peers for vpc
- test: update tests on vpc
* Dynamic: fix build errors after merging as number PR
* Dynamic: fix TODOs
* Dynamic: fix smoke test on VPC
* Allow creation of networks by users with as numbers
* Address review comments
* Move BGPService to bgp package and inject it on BaseCmd
* Revert changes for CKS and address more comments
* Display left side menu option for AS number only for root admin
* Dynamic: create/update BGP peer with details
refer to https://docs.frrouting.org/en/latest/bgp.html
* Dynamic: fix build error and remove access to ListBgpPeers cmd for regular users
* Dynamic: assign all zone BGP peers to user networks
* Dynamic: show BGP peer info of networks only for root admin
* AS number: disable specifyasnumber for non-NSX offerings
* Dynamic: pass bgppeer details to command and fix typo with ip6 addr
* Dynamic: list BGP peers by isdedicated, and fix change bgppeers for network/vpc
* Dynamic: add UI labels
* Dynamic: add bgp peers to vpc response
* Dynamic: list bgp peers by keyword, fix list by asnumber
* Dynamic: fix list bgppeers by keyword and db schema
* Dynamic: fix list bgppeers do not return dedicated peers
* Dynamic: update UI when create network/vpc offering
* Update server/src/main/java/com/cloud/configuration/ConfigurationManagerImpl.java
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Update tools/marvin/setup.py
* Dynamic: network mode must be same when update a network with new offering
* Dynamic: add method networkModel.isAnyServiceSupportedInNetwork
* Dynamic: rename APIs and classes
* Dynamic: fix unit tests due to previous changes
* Dynamic: validateNetworkCidrSize when auto-create subnet
* Dynamic: check AS number overlap
* Dynamic: add ActionEvent
* Dynamic: small code optimization
* Dynamic: fix ui bugs after api rename
* Dynamic: add marvin and test for ASN ranges and AS numbers
* Dynamic: add account setting use.system.bgp.peers
also
- change the default value of routed.ipv4.vpc.max.cidr.size and routed.ipv4.vpc.min.cidr.size
- change the category of settings
* static: fix ui error when delete zone ipv4 subnets
* static: small UI polish
* Dynamic: throw exception when as number is required but not passed
* Dynamic: fix typo when create FRR directory which causes network deletion failures
* Dynamic: connect to ALL (or ALL dedicated) BGP peers if no BGP peer mapping for the network/vpc
* Dynamic: throw exception when as number is required for VPC but not passed
* Dynamic: list bgp peers by useSystemBgpPeers
* Dynamic: fix frr config in VPC VR when change bgp peers
* Dynamic: create frr config even if there is no VPC tiers
* Dynamic: list bgp peers by zoneid (required for account) and account
* Dynamic: only apply FRR config for vpc tiers with dynamic routing
* Dynamic: donot send commands to router if commands size is 0
* Dynamic: fix 'new IPv6 address is not valid' when update bgp peer without IPv6
* Dynamic: throw exception if fail to allocate AS number when create network/vpc with dynamic routing
* Dynamic: enable ipv6 unicast and 'ip nht resolve-via-default'
* Dynamic: delete network/vpc if fail to allocate AS number when create network/vpc with dynamic routing
* test: add unit tests for ASN APIs
* test: add unit tests for core module
* test: add unit tests for API responses
* test: add unit tests for BgpPeerTO
* test: add minor changes
* test: add tests for create/delete/update/list RoutingFirewallRuleCmd
* Static: show ip4 routes for vpc tiers
* test: fix smoke test failure caused by type change of as number
* test: add test for Ipv4SubnetForZoneCmd
* test: add test for Ipv4SubnetForGuestNetworkCmd and BgpPeerCmd
* UI: do not show redundant router when network mode is ROUTED as RVR is not supported
* UI: hide 'Conserve mode' when networkmode is ROUTED
* test: add unit tests for ListASNumbersCmdTest
* Static: remove allocated IPv4 subnet when delete a network or vpc
* test: add unit tests for BgpPeersRules
* Dynamic: set ipv4routing from network offering
* server: list as numbers and ipv4 subnets by keyword
* server: remove dedicated bgp peers and ipv4 subnets when delete an account or domain
* server: fix dedicated ipv4 subnet is allocated to other accounts
* UI: fix allocated time format
* server: ignore project is projectid is -1 so bgppeers/ipv4subnets works in project view
* UI: add project column to bgp peers and ipv4 subnets
* server: fix list AS numbers by domain admin or normal user
* server: fix network creation when ipv4 subnet is dedicated
* UI: polish network.js
* Dynamic: fix frr config for ipv6 routing
* Static routing: support cks cluster
* Static: get/create IPv4 subnet from dedicated subnets at first
* Dynamic: add BGP peers tab
* Static: remove redundant loops
* api: add since to api and response
* server: add unit tests
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This is a simple NAS backup plugin for KVM which may be later expanded for other hypervisors. This backup plugin aims to use shared NAS storage on KVM hosts such as NFS (or CephFS and others in future), which is used to backup fully cloned VMs for backup & restore operations. This may NOT be as efficient and performant as some of the other B&R providers, but maybe useful for some KVM environments who are okay to only have full-instance backups and limited functionality.
Design & Implementation follows the `networker` B&R plugin, which is simply:
- Implement B&R plugin interfaces
- Use cmd-answer pattern to execute backup and restore operations on KVM host when VM is running (or needs to be restored) - instead of a B&R API client, relies on answers from KVM agent which executes the operations
- Backups are full VM domain snapshots, copied to a VM-specific folders on a NAS target (NFS) along with a domain XML
- Backup uses libvirt feature: https://libvirt.org/kbase/live_full_disk_backup.html orchestrated via virsh/bash script (nasbackup.sh) as the libvirt-java lacks the bindings
- Supported instance volume storage for restore operations: NFS & local storage
Refer the doc PR for feature limitations and usage details:
https://github.com/apache/cloudstack-documentation/pull/429
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
Added caching for ConfigKey value retrievals based on the Caffeine
in-memory caching library.
https://github.com/ben-manes/caffeine
Currently, expire time for a cache is 30s and each update of the
config key invalidates the cache. On any update or reset of the
configuration, cache automatically invalidates for it.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* reface quotaTariffList process and add listOnlyRemoved parameter
* add unit tests for createQuotaTariffResponse and isUserAllowedToSeeActivationRules methods
* update QuotaTariffListCmdTest
* refactor quota tariffs creation
* refactor quota tariffs update
* fix unit test in JsInterpreter
* remove unused import
* refactor quota listing and add quota deletion
* add functionality to create tariff from UI, not working when specifying dates
* fix date parsing
* add labels
* fix details view of tariffs
* new update tariff view
* fix filter placeholder
* remove debug html
* add labels
* make value field to be required when updating a tariff
* add labels
* add portuguese labels
* remove unused label
* fix updating tariff when there was no enddate specified
* refactor dates
* refactor dates
* clear code
* update disabled dates in date picker
* clear ListView component
* fix unnecessary updates when the new end date was equal to the exising end date
* fix when today was selected to start date
* add keyword to filter
* change usage type response
* add keyword and usagetype filter on UI
* fix disabled end dates in date picker
* modify datepickers to use datetime
* small fixes
* make value an unrequired field on update form
* remove duplicate import
* remove unused css classes
* add UI support for position parameter
* resize input fields to fill all available horizontal space
* remove console.log()
* remove unnecessary fully qualified names
* replace `usagetypeid` property name to `id` on `listUsageTypes` API call
* replace `usagetypeid` property name to `id` on `listUsageTypes` API call
This PR adds a new UI tool for admins for viewing and downloading usage records.
This PR also makes startdate and enddate as non required params for generateUsageRecords. (Fixes: #7133)
The metrics for VMs and VM disks in CloudStack depend on the hypervisor plugin used for each hypervisor. The behavior can vary across different hypervisors. For VMware, metrics are retrieved as average value for the time interval defined in the global configuration - vmware.stats.time.window.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* ui: add new API docs tab
This introduces a new API docs table which is enabled by default but
the admin can disable it via config.json. This uses the discovered
APIs for logged in user/account to show them the APIs accessible to them
and generates dynamic API docs based on them which are searchable. Also
introduces some common auto-completed API groups that are available to
most roles.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Update ui/src/views/plugins/ApiDocsPlugin.vue
* Update ui/src/views/plugins/ApiDocsPlugin.vue
* Update ui/src/views/plugins/ApiDocsPlugin.vue
* Update ui/src/views/plugins/ApiDocsPlugin.vue
* Update ui/src/views/plugins/ApiDocsPlugin.vue
* fix performance issues
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Update ui/src/views/plugins/ApiDocsPlugin.vue
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* Update ui/public/locales/en.json
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* address Suresh's feedback
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* filter example/options as we type
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Address Joao's comments
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* config.json: make configuration names consistent with other
Makes login related config param to be consistent with the original
`loginFooter`. Group them together.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* ui: assorted UI fixes and copy console URL fix
This brings in related buttons across some infra views and new columns
which are missing. Also fixes the copy console URL issue on some
browsers.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* New feature: Change storage pool scope
* Added checks for Ceph/RBD
* Update op_host_capacity table on primary storage scope change
* Storage pool scope change integration test
* pull 8875 : Addressed review comments
* Pull 8875: remove storage checks, AbstractPrimayStorageLifeCycleImpl class
* Pull 8875: Fixed integration test failure
* Pull 8875: Review comments
* Pull 8875: review comments + broke changeStoragePoolScope into smaller functions
* Added UT for changeStoragePoolScope
* Rename AbstractPrimaryDataStoreLifeCycleImpl to BasePrimaryDataStoreLifeCycleImpl
* Pull 8875: Dao review comments
* Pull 8875: Rename changeStoragePoolScope.vue to ChangeStoragePoolScope.vue
* Pull 8875: Created a new smokes test file + A single warning msg in ui
* Pull 8875: Added cleanup in test_primary_storage_scope.py
* Pull 8875: Type in en.json
* Pull 8875: cleanup array in test_primary_storage_scope.py
* Pull:8875 Removing extra whitespace at eof of StorageManagerImplTest
* Pull 8875: Added UT for PrimaryDataStoreHelper and BasePrimaryDataStoreLifeCycleImpl
* Pull 8875: Added license header
* Pull 8875: Fixed sql query for vmstates
* Pull 8875: Changed icon plus info on disabled mode in apidoc
* Pull 8875: Change scope should not work for local storage
* Pull 8875: Change scope completion event
* Pull 8875: Added api findAffectedVmsForStorageScopeChange
* Pull 8875: Added UT for findAffectedVmsForStorageScopeChange and removed listByPoolIdVMStatesNotInCluster
* Pull 8875: Review comments + Vm name in response
* Pull 8875: listByVmsNotInClusterUsingPool was returning duplicate VM entries because of multiple volumes in the VM satisfying the criteria
* Pull 8875: fixed listAffectedVmsForStorageScopeChange UT
* listAffectedVmsForStorageScopeChange should work if the pool is not disabled
* Fix listAffectedVmsForStorageScopeChangeTest UT
* Pull 8875: add volume.removed not null check in VmsNotInClusterUsingPool query
* Pull 8875: minor refactoring in changeStoragePoolScopeToCluster
* Update server/src/main/java/com/cloud/storage/StorageManagerImpl.java
* fix eof
* changeStoragePoolScopeToZone should connect pool to all Up hosts
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* Create/Export OVA file of the VM on external vCenter host, to temporary conversion location (NFS)
* Fixed ova issue on untar/extract ovf from ova file
"tar -xf" cmd on ova fails with "ovf: Not found in archive" while extracting ovf file
* Updated VMware to KVM instance migration using OVA
* Refactoring and cleanup
* test fixes
* Consider zone wide pools in the destination cluster for instance conversion
* Remove local storage pool support as temporary conversion location
- OVA export not possible as the pool is not accessible outside host, NFS pools are supported.
* cleanup unused code
* some improvements, and refactoring
* import nic unit tests
* vmware guru unit tests
* Separate clone VM and create template file for VMware migration
- Export OVA (of the cloned VM) to the conversion location takes time.
- Do any validations with cloned VM before creating the template (and fail early).
- Updated unit tests.
* Check conversion support on host before clone vm / create template on vmware (and fail early)
* minor code improvements
* Auto select the host with instance conversion capability
* Skip instance conversion supported response param for non-KVM hosts
* Show supported conversion hosts in the UI
* Skip persistence map update if network doesn't exist
* Added support to export OVA from KVM host, through ovftool (when installed in KVM host)
* Updated importvm api param 'usemsforovaexport' to 'forcemstodownloadvmfiles', to be generic
* Updated hardcoded UI messages with message labels
* Updated UI to support importvm api param - forcemstodownloadvmfiles
* Improved instance conversion support checks on ubuntu hosts, and for windows guest vms
* Use OVF template (VM disks and spec files) for instance conversion from VMware, instead of OVA file
- this would further increase the migration performance (as it reduces the time for OVA preparation / archiving of the VM files into a single file)
* OVF export tool parallel threads code improvements
* Updated 'convert.vmware.instance.to.kvm.timeout' config default value to 3 hrs
* Config values check & code improvements
* Updated import log, with time taken and vm details
* Support for parallel downloads of VMware VM disk files while exporting OVF from MS, and other changes below.
- Skip clone for powered off VMs
- Fixes to support standalone host (with its default datacenter)
- Some code improvements
* rebase fixes
* rebase fixes
* minor improvement
* code improvements - threads configuration, and api parameter changes to import vm files
* typo fix in error msg
* Ability to specify NFS mount options while adding a primary storage and modify it later
* Pull 8947: Rename all occurrence of nfsopt to nfsMountOpt and added nfsMountOpts to ApiConstants
* Pull 8947: Refactor code - move into separate methods
* Pull 8947: CollectionsUtils.isNotEmpty and switch statement in LibvirtStoragePoolDef.java
* Pull 8947: UI - cancel maintainenace will remount the storage pool and apply the options
* Pull 8947: UI - moved edit NFS mount options to edit Primary Storage form
* Pull 8947: UI - moved 'NFS Mount Options' to below 'Type' in dataview
* Pull 8947: Fixed message in AddPrimaryStorage.vue
* Pull 8947: Convert _nfsmountOpts to Set in libvirtStoragePoolDef
* Pull 8947: Throw exception and log error if mount fails due to incorrect mount option
* Pull 8947: Added UT and moved integration test to component/maint
* Pull 8947: Review comments
* Pull 8947: Removed password from integration test
* Pull 8947: move details allocation to inside the if loop in getStoragePoolNFSMountOpts
* Pull 8947: Fixed a bug in AddPrimaryStorage.vue
* Pull 8947: Pool should remain in maintenance mode if mount fails
* Pull 8947: Removed password from integration test
* Pull 8947: Added UT
* Pull 8875: Fixed a bug in CloudStackPrimaryDataStoreLifeCycleImplTest
* Pull 8875: Fixed a bug in LibvirtStoragePoolDefTest
* Pull 8947: minor code restructuring
* Pull 8947 : added some ut for coverage
* Fix LibvirtStorageAdapterTest UT
This PR introduces the functionality of purging removed DB entries for CloudStack entities (currently only for VirtualMachine). There would be three mechanisms for purging removed resources:
Background task - CloudStack will run a background task which runs at a defined interval. Other parameters for this task can be controlled with new global settings.
API - New admin-only API purgeExpungedResources. It will allow passing the following parameters - resourcetype, batchsize, startdate, enddate. Currently, API is not supported in the UI.
Config for service offering. Service offerings can be created with purgeresources parameter which would allow purging resources immediately on expunge.
Following new global settings have been added:
expunged.resources.purge.enabled: Default: false. Whether to run a background task to purge the expunged resources
expunged.resources.purge.resources: Default: (empty). A comma-separated list of resource types that will be considered by the background task to purge the expunged resources. Currently only VirtualMachine is supported. An empty "value will result in considering all resource types for purging
expunged.resources.purge.interval: Default: 86400. Interval (in seconds) for the background task to purge the expunged resources
expunged.resources.purge.delay: Default: 300. Initial delay (in seconds) to start the background task to purge the expunged resources task.
expunged.resources.purge.batch.size: Default: 50. Batch size to be used during expunged resources purging.
expunged.resources.purge.start.time: Default: (empty). Start time to be used by the background task to purge the expunged resources. Use format yyyy-MM-dd or yyyy-MM-dd HH:mm:ss.
expunged.resources.purge.keep.past.days: Default: 30. The number of days in the past from the execution time of the background task to purge the expunged resources for which the expunged resources must not be purged. To enable purging expunged resource till the execution of the background task, set the value to zero.
expunged.resource.purge.job.delay: Default: 180. Delay (in seconds) to execute the purging of an expunged resource initiated by the configuration in the offering. Minimum value should be 180 seconds and if a lower value is set then the minimum value will be used.
Documentation PR: apache/cloudstack-documentation#397
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Wei Zhou <weizhou@apache.org>
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
* ui: change reporting link to Github Discussions
Many users are using the footer link to open questions about CloudStack
that are usually discussed on the users@ mailing list. This fixes that
behaviour by diverting them to Github Discussions which are linked with
the user@ ML, smart users can still report actual bugs/issues via the
issues tab.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Update en.json
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.19:
linstor: disconnect-disk also search for resource name in Linstor (#9035)
ui: add support to change Account role for admins (#9012)
Use parameter dcId as wrapper to prevent NPE (#8986)
- Move allow.additional.vm.configuration.list.kvm from Global to Account setting
- Disallow VM details start with "extraconfig" when deploy VMs
- Skip changes on VM details start with "extraconfig" when update VM settings
- Allow only extraconfig for DPDK in service offering details
- Check if extraconfig values in vm details are supported when start VMs
- Check if extraconfig values in service offering details are supported when start VMs
- Disallow add/edit/update VM setting for extraconfig on UI
(cherry picked from commit e6e4fe16fb)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 7aea9db1c8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Move allow.additional.vm.configuration.list.kvm from Global to Account setting
- Disallow VM details start with "extraconfig" when deploy VMs
- Skip changes on VM details start with "extraconfig" when update VM settings
- Allow only extraconfig for DPDK in service offering details
- Check if extraconfig values in vm details are supported when start VMs
- Check if extraconfig values in service offering details are supported when start VMs
- Disallow add/edit/update VM setting for extraconfig on UI
(cherry picked from commit e6e4fe16fb)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* NSX integration - skeletal code
* Fix module not loading on startup
* add upgrade path and daos
\n add nsx controller command
* add support for adding and listing nsx provider to a zone
* add license
* add default VPC offering and update upgrade path
* add global setting to enable nsx plugin
* add delete nsx controller operation
* add nsxresource
* add NSX resource , api client, create tier1 gw
* update db
* update response and add license
* Add support to create and delete nsx tier-1 gateway
* add license
* cleanup and add skeletal code for network creation
* add create/delete segment and UI integration
* add license
* address code smells - part 1
* fix test / build failure
* NSX integration - skeletal code
* Fix module not loading on startup
* add upgrade path and daos
\n add nsx controller command
* add support for adding and listing nsx provider to a zone
* add license
* add default VPC offering and update upgrade path
* add global setting to enable nsx plugin
* add delete nsx controller operation
* add nsxresource
* add NSX resource , api client, create tier1 gw
* update db
* update response and add license
* Add support to create and delete nsx tier-1 gateway
* add license
* cleanup and add skeletal code for network creation
* add create/delete segment and UI integration
* add license
* address code smells - part 1
* fix test / build failure
* add ui changes + update nsx_provider table transport zones + use NSX broadcast domain for add nics to router
* ui: fix password field, and backend changes
* add route advertisement
* update offering
* update offering
* add sleep before deletion of vpc / tier g/w for ports to be removed
* move creation of segments to design phase
* change provider to VPC router for Dhcp & dns service in an nsx offering
* Add public nic for NSX
* reserve first IP (after g/w) of subnet for router nic - NSX
* revert reserving 1st IP in vpc segments
* [NSX] Create a DHCP relay and add it to a VPC tier segment (#107)
* Create DHCP relay command and execute request
* In progress integrate with networking
* Create DHCP relay config on the network VR allocation
* Revert domain router dao changes
* Create DHCP relay con VR nic plug to NSX network
* Link DHCP relay config to segment after creation
* [NSX] Cleanup DHCP Relay config on segment deletion (#108)
* Cleanup DHCP Relay config on segment deletion
* update segment & relay name generators and call delete dhcprelay after deletion of segment
* address comment
* [NSX] Fix DHCP relay config deletion was missing zone name (#8068)
* [NSX] Refactor API wrapper operations (#8059)
* [NSX] Refactor API wrapper operations
* Big refactor
* Address review comment
* change network cidr to cidr to prevent NPE
* add domain and zone names to the various networks - vpc & tier
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* Nsx unit tests (#8090)
* Add tests
* add test for NsxGuestNetworkGuru
* add unit tests for NsxResource
* add unti tests for NsxElement
* cleanup
* [NSX] Refactor API wrapper operations
* update tests
* update tests - add nsxProviderServiceImpl test
* add unit test - NsxServiceImpl
* add license
* Big refactor
* Address review comment
* change network cidr to cidr to prevent NPE
* add domain and zone names to the various networks - vpc & tier
* fix tests
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* modify NSX resource naming convention (#8095)
* modify NSX resource naming convention
* remove unused imports
* add a setup phase between desgin and implementation of a network for intermediary steps
* add method to all classes
* NSX: Refactor Network & VPC offering (#8110)
* [NSX] Refactor API wrapper operations
* Network offering changes for NSX
* fix services and provider combination
* address comments: rename param
* update nsx_mode parameter
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix test
* [NSX] Allow NSX isolated networks (#8132)
* Add network offerings for NSX on isolated networks
* Fix offerings creation
* In progress NSX isolated network
* Fixes
* Fix NIC allocation to router
* NSX: Add Step for Adding Public traffic network for NSX During zone creation (#8126)
* NSX: Add Step for Adding Public traffic network for NSX
* address comments and cleanup
* address comment
* remove indent
* NSX: Create and Delete static NAT & Port forward rules (#8131)
* NSX: Create and delete NSX Static Nat rules
* fix issues with static nat
* add static nat
* Support to add and delete Port forward rules
* add license
* fix adding multiple pf rules
* cleanup
* fix lint check
* fix smoke tests
* fix smoke tests
* Nsx add lb rule (#8161)
* NSX: Create and delete NSX Static Nat rules
* fix issues with static nat
* add static nat
* Support to add and delete Port forward rules
* add license
* fix adding multiple pf rules
* cleanup
* NSX: Add support to create and delete Load balancer rules
* fix deletion of lb rules
* add header file and update protocol detail
* build failure fix
* [NSX] Add SNAT support (#8100)
* In progress add source NAT
* Fix after merge
* Fix tests
* Fix NPE on isolated network deletion
* Reserve source NAT IP when its not passed for NSX VPC
* Create source NAT rule on VR NIC allocation
* Fix update VPC and remove VPC to update and remove SNAT rule
* Fix packaging
* Address review comment
* Fix build
* fix build - unused import
* Add defensive checks
* Add missing design to NSX public guru
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* NSX: Fix VR public NIC allocation (#8166)
* NSX: fix LB member addition and deletion and add defensive checks (#8167)
* Fix public NIC NPE on broadcast URI
* NSX: Router Public nic to get IP from systemVM Ip range (#8172)
* NSX: Router Public nic to get IP from systemVM Ip range
* Fix VR IP address and setSourceNatIp command
* NSX: hide systemVM reserved IP range SourceNAT
* fix test
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix test failure
* test failure fix
* [NSX] Fix update source NAT IP (#8176)
* [NSX] Fix update source NAT IP
* Fix startup
* Fix API result
* NSX - add LB route Advertizement (#8192)
* [NSX] Add ACL types support (#8224)
* NSX: Create segment group on segment creation
* Add unit tests
* Remove group for segment before removing segment
* Create Distributed Firewall rules
* Remove distributed firewall policy on segment deletion
* Fix policy rule ID and add more unit tests
* Fix DROP action rules and transform tests
* Add new ACL rules
* Fixes
* associate security policies with groups and not to DFW and add deletion of rules
* Fix name convention
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* NSX: Fix creation of VPCs (#8320)
* Fix ACL rules creation (#8323)
* [NSX] Fix database views (#8325)
* NSX: Add CKS Support & Firewall rules for Isolated Networks (#8189)
* NSX: Add ALL LB IP to the list of route advertisements in tier1
* NSX: Support Source NAT on NSX Isolated networks
* NSX: Cks Support
* NSX: Create segment group on segment creation
* Add unit tests
* Remove group for segment before removing segment
* Create Distributed Firewall rules
* Remove distributed firewall policy on segment deletion
* Fix policy rule ID and add more unit tests
* Add support for routed NSX Isolated networks \n and non RFC 1918 compliant IPs
* Add support for routed NSX Isolated networks \n and non RFC 1918 compliant IPs
* Add Firewall rules
* build failure - fix unit test
* fix npes
* Add support to delete firewall rules
* update nsx cks offering
* add license
* update order of ports in PF & FW rules
* fix filter for getting transport zones
* CKS support changed - MTU updated, etc
* add LB for CKS on VPC
* address comments
* adapt upstream cks logic for vpc
* rever mtu hack
* update UI changes as per upstream fix
* change display test for CKS n/w offerings for isolated and VPC tiers
* add extra line for linter
* address comment
* revert list change
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix ui build failure
* [NSX] Address SonarCloud Bugs (#8341)
* [NSX] Address SonarCloud Bugs
* Fix NSX API connection issues
* NSX: Add unit tests to increase coverage (#8355)
* NSX: Add unit tests
* cleanup unused imports
* add more unit tests
* add tests for publicnsxnetworkguru
* add license
* fix build failures
* address sonar comment
* fix security hotspots
* NSX: Add more unit tests (#8381)
* NSX : Unit tests
* remove unused imports
* remove unused import causing build failure
* fix build failures due to unused imports
* fix build failure
* fix test assertion
* remove unused imports
* remove unused import
* Nsx UI zone bug (#8398)
* NSX: Attempt to fix NSX Zone creation bug for public networks
* fix zone wizard public traffic issue
* add proper filtering of offerings based on VPC nsx mode
* clean up console logs
* NSX: Fix code smells and reported bugs (#8409)
* NSX: Fix code smells and reported bugs
* fox override issue
* remove unused imports
* fix test
* refactor code to reduce complexity
* add lisence
* cleanup
* fix build failure
* fix build failure
* address comments
* test - add config to ignore certain files from test coverage
* test exclusion of classes from test cov
* rever pom changes
* [NSX] Add more unit tests (#8431)
* [NSX] Add more unit tests
* More tests
* Fix build errors
* NSX: Prevent creation of L2 and Shared networks for NSX (#8463)
* NSX: Prevent creation of L2 and Shared networks for NSX
* add checks to backend to prevent creation of l2 and shared networks in nsx zones and filter only nsx offerings when creating isolated networks
* cleanup
* NSX: Fix code smells (#8436)
* NSX: Fix code smells
* Add changes to service creation logic
* CKS: Add action to during firewall rule creation (#8498)
* NSX,UI: Deduplicate network list when creating kubernetes clusters (#8513)
* NSX: Make LB service selectable in network offering (#8512)
* NSX: Make LB service selectable in network offering
* fix label
* address comments
* address comments
* NSX: Add appropriate error message when icmp type is set to -1 for NSX (#8504)
* NSX: Add appropriate error message when icmp type is set to -1 for NSX
* address comments
* update text
* fix test
* fix test - build failure
* fix test - build failure
* NSX: Cleanup NSX resources during k8s cluster cleanup (#8528)
* fix test failure
* NSX: Improve segment deletion process (#8538)
* NSX: Add passive monitor for NSX LB to test whether a server is available (#8533)
* NSX: Add passive monitor for NSX LB to test whether a server is available
* Add active monitors too
* fix build failure
* NSX: Add check for ICMP code / type for NSX zones (#8542)
* NSX: Fix Routed Mode for Isolated and VPC networks (#8534)
* NSX: Fix Routed Mode for Isolated and VPC networks
* NSX: Fix Routed mode - add checks for ports added for FW rules
* clean up code
* fix build failure
* NSX: Add retry logic with sleep to delete segments (#8554)
* NSX: Add retry logic with sleep to delete segments
* add logs
* NSX: Fix custom ACL check (#2)
* NSX: Fix custom ACL check
* NSX: Fix custom ACL check
* Nsx vpc routed mode (#5)
* NSX: Fix VPC routed mode
* NSX: VPC route mode
* remove unnecessary changes
* Nsx: Support internal LB (#4)
* NSX: Support internal LB service in NSX
* add lb removal logic
* Fix UI issue hiding internal LB tab
* Refactor method name
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* NSX: Improve NSX resource cleanup process (#3)
* Fix unit test
* NSX: Add SourceNAT service to the default Routed offering for VPC (#13)
* Fix VPC restart with cleanup (#12)
* NSX: Fix ACL rule removal on replacement and fix rule order (#11)
* NSX: fix smoke test failure for ACLs (#9)
* Fix unit tests
* Fix NSX plugin pom XML
* NSX: Add support to re-order ACL rules (NSX FW rules) (#14)
* [WIP] NSX: Add support to re-order ACL rules (NSX FW rules)
* fix reordering of acl rules on all networks that it is associated to
* clean up and attempt test fix
* Fix tests
* Remove unused import
* tweak reorder logic
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix zone creation issue for internal load balancer
* Fix
* Fix unit test
* fix logger
* fix logger
* fix logger
* NSX: Fix VPC form to ignore source NAT IP when creating VPCs and fix label
* Move SQL changes to the newest schema file
* NSX: Last Fixes
* Fix build
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
Feature spec: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Granular+Resource+Limit+Management
Introduces the concept of tagged resource limits for granular resource limit management. Limits can be enforced on accounts and domains for the deployment of entities for a tagged resource. Current tagged resource limits can be used for the following resource types,
Host limits
- user_vm
- cpu
- memory
Storage limits
- volume
- primary_storage
Following global settings can used to specify tags for which limit needs to be enforced,
Host: `resource.limit.host.tags`
Storage: `resource.limit.storage.tags`
Option for specifying tagged resource limits and viewing tagged resource usage are made available in the UI.
Enhances the use of templatetag for VM deployment and template creation
Adds option to list service/compute offerings that can be used with a given template. A new parameter named templateid has been added.
Adds option to list disk offering with suitability flag for a virtual machine. A new parameter named virtualmachineid has been added to the listDiskOfferings API which when passed returns suitableforvirtualmachine param in the response.
* Use free/total instead of free metric to calculate imbalance
* Filter out hosts for condensed while checking imbalance
* Make DRS more configurable
* code refactor
* Add unit tests
* fixup
* Fix validation for drs.imbalance.condensed.skip.threshold
* Add logging and other minor changes for drs
* Add some logging for drs
* Change format for drs imbalance to string
* Show drs imbalance as percentage
* Fixup label for memorytotal in en.json
This PR provides a new primary storage volume type called "FiberChannel" that allows access to volumes connected to hosts over fiber channel connections. It requires Multipath to provide path discovery and failover. Second, the PR adds an AdaptivePrimaryDatastoreProvider that abstracts how volumes are managed/orchestrated from the connector to communicate with the primary storage provider, using a ProviderAdapter interface, allowing the code interacting with the primary storage provider API's to be simpler and have no direct dependencies on Cloudstack code. Lastly, the PR provides an implementation of the ProviderAdapter classes for the HP Enterprise Primera line of storage solutions and the Pure Flash Array line of storage solutions.
This PR adds the capability in CloudStack to convert VMware Instances disk(s) to KVM using virt-v2v and import them as CloudStack instances. It enables CloudStack operators to import VMware instances from vSphere into a KVM cluster managed by CloudStack. vSphere/VMware setup might be managed by CloudStack or be a standalone setup.
CloudStack will let the administrator select a VM from an existing VMware vCenter in the CloudStack environment or external vCenter requesting vCenter IP, Datacenter name and credentials.
The migrated VM will be imported as a KVM instance
The migration is done through virt-v2v: https://access.redhat.com/articles/1351473, https://www.ovirt.org/develop/release-management/features/virt/virt-v2v-integration.html
The migration process timeout can be set by the setting convert.instance.process.timeout
Before attempting the virt-v2v migration, CloudStack will create a clone of the source VM on VMware. The clone VM will be removed after the registration process finishes.
CloudStack will delegate the migration action to a KVM host and the host will attempt to migrate the VM invoking virt-v2v. In case the guest OS is not supported then CloudStack will handle the error operation as a failure
The migration process using virt-v2v may not be a fast process
CloudStack will not perform any check about the guest OS compatibility for the virt-v2v library as indicated on: https://access.redhat.com/articles/1351473.
In UI, shared network IP addresses are shown in a tab named Public IP addresses inside the network view.
Public IP addresses have their own subsection in the UI. Network → Public IP address. Shared network IP addresses are not shown in this view.
This is confusing for users and Public IP addresses tab in the network view has been renamed as IP addresses for a shared network.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
This PR aligns the use of terminology, renaming VM / virtual machine references to 'Instance' and also capitalising the terms Templates, Network, Snapshot, User, Account in CloudStack UI. “VM snapshots” moved under the “Compute” main menu, and renamed to “Instance Snapshots”. “Snapshots” (under Storage section) renamed to “Volume Snapshots”.
OAuth2, the industry-standard authorization or authentication framework, simplifies the process of
granting access to resources. CloudStack supports OAuth2 authentication wherein users can login into
CloudStack without using a username and password. Support for Google and Github providers has been added.
Other OAuth2 providers can be easily integrated with CloudStack using its plugin framework.
The login page will show provider options when the OAuth2 is enabled and corresponding providers are configured.
"OAuth configuration" sub-section is present under "Configuration" where admins can register the corresponding
OAuth providers.
This pull request (PR) implements a Distributed Resource Scheduler (DRS) for a CloudStack cluster. The primary objective of this feature is to enable automatic resource optimization and workload balancing within the cluster by live migrating the VMs as per configuration.
Administrators can also execute DRS manually for a cluster, using the UI or the API.
Adds support for two algorithms - condensed & balanced. Algorithms are pluggable allowing ACS Administrators to have customized control over scheduling.
Implementation
There are three top level components:
Scheduler
A timer task which:
Generate DRS plan for clusters
Process DRS plan
Remove old DRS plan records
DRS Execution
We go through each VM in the cluster and use the specified algorithm to check if DRS is required and to calculate cost, benefit & improvement of migrating that VM to another host in the cluster. On the basis of cost, benefit & improvement, the best migration is selected for the current iteration and the VM is migrated. The maximum number of iterations (live migrations) possible on the cluster is defined by drs.iterations which is defined as a percentage (as a value between 0 and 1) of total number of workloads.
Algorithm
Every algorithms implements two methods:
needsDrs - to check if drs is required for cluster
getMetrics - to calculate cost, benefit & improvement of a migrating a VM to another host.
Algorithms
Condensed - Packs all the VMs on minimum number of hosts in the cluster.
Balanced - Distributes the VMs evenly across hosts in the cluster.
Algorithms use drs.level to decide the amount of imbalance to allow in the cluster.
APIs Added
listClusterDrsPlan
id - ID of the DRS plan to list
clusterid - to list plans for a cluster id
generateClusterDrsPlan
id - cluster id
iterations - The maximum number of iterations in a DRS job defined as a percentage (as a value between 0 and 1) of total number of workloads. Defaults to value of cluster's drs.iterations setting.
executeClusterDrsPlan
id - ID of the cluster for which DRS plan is to be executed.
migrateto - This parameter specifies the mapping between a vm and a host to migrate that VM. Format of this parameter: migrateto[vm-index].vm=<uuid>&migrateto[vm-index].host=<uuid>.
Config Keys Added
ClusterDrsPlanExpireInterval
Key drs.plan.expire.interval
Scope Global
Default Value 30 days
Description The interval in days after which old DRS records will be cleaned up.
ClusterDrsEnabled
Key drs.automatic.enable
Scope Cluster
Default Value false
Description Enable/disable automatic DRS on a cluster.
ClusterDrsInterval
Key drs.automatic.interval
Scope Cluster
Default Value 60 minutes
Description The interval in minutes after which a periodic background thread will schedule DRS for a cluster.
ClusterDrsIterations
Key drs.max.migrations
Scope Cluster
Default Value 50
Description Maximum number of live migrations in a DRS execution.
ClusterDrsAlgorithm
Key drs.algorithm
Scope Cluster
Default Value condensed
Description DRS algorithm to execute on the cluster. This PR implements two algorithms - balanced & condensed.
ClusterDrsLevel
Key drs.imbalance
Scope Cluster
Default Value 0.5
Description Percentage (as a value between 0.0 and 1.0) of imbalance allowed in the cluster. 1.0 means no imbalance
is allowed and 0.0 means imbalance is allowed.
ClusterDrsMetric
Key drs.imbalance.metric
Scope Cluster
Default Value memory
Description The cluster imbalance metric to use when checking the drs.imbalance.threshold. Possible values are memory and cpu.
This PR adds new functionality to copy snapshots across zones and take snapshots for multiple zones.
Copy functionality is similar to template copy. The source zone acts as the web server from where the destination zone(s) can download the snapshot files. For this purpose, a new API - `copySnapshot` has been added. The response for copySnapshot will be returning zone and download details from the first destination zone of the request. This behaviour is similar to the `copyTemplate` API.
In a similar manner, multiple zones can be selected while taking the snapshots or creating snapshot policies. For this snapshot will be taken in the base zone(in which volume is present) and then copied to the additional zones. A new parameter - `zoneids` has been added to `createSnapshot` and `createSnapshotPolicy` APIs.
As snapshots can be present on multiple zones (secondary stores), a new parameter `zoneid` has been added to delete the snapshot copy on a specific zone.
`listSnapshots` API has been updated to allow listing snapshot entries for different zones/datastores. New parameters - `showUnique`, `locationType` have been added.
Events generated during snapshot operations will now be linked to the snapshot itself rather than the volume of the snapshot.
`listSnapshotPolicies` and `createSnapshotPolicy` APIs will return zone details of the zones in which backup will be scheduled for the policy.
----
New API added
`copySnapshot`
Request and response params updated for APIs
```
- listSnapshots
- deleteSnapshot
- createTemplate
- listZones
- listSnapshotPolicies
- createSnapshotPolicy
```
UI updated for
- Snapshot detail view
- Create snapshot form
- Create snapshot policy form
- Create volume (from snapshot) form
- Create template (from snapshot) form
Doc PR: https://github.com/apache/cloudstack-documentation/pull/344
PR: https://github.com/apache/cloudstack/pull/7873
This PR aims at improving the CloudStack dashboard and introduces the following:
Admin dashboard: six cards that are responsive to screen sizes and show zone specific compute, storage and network allocation, as well as instance/hosts stats, alerts and events. Now, by default, the admin dashboard shows aggegate data from all zones, with option for admin to select individual zone to see individual zone stats
Account/project dashboard: six cards that are responsive to screen sizes and show account or project specific resource lists/counts, and limits shown in three cards as (a) compute (with running stopped instances), (b) storage and (c) network allocation, an admin-defined links/docs card (via config.json) and events cards. Admin is allowed to configure project limits on project dashboards.
A global create button on the top global header/user-menu to allow for quick actions such as to deploy a VM, CKS cluster and create a volume (more actions can be added as desired via code changes) etc.
Doc PR - apache/cloudstack-documentation#349
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR aims to polish the UI with following tweaks and changes:
- Increase resource and os-logo icons both in list view, user-menu bar and VM deployment form
- Fix css issues in VM deployment form when resource icons are on some of the templates/isos but not all
- Replace edit icon in the resource icon editting button on the infocard, in resource view
- Fix css marging/padding issue for nav bar and left-branding/logo
- Introduce a new Limits option in the user menu, to allow users to see their own limits when they log in
- Rename resource tab to limits tab for accounts, project and domains
- Introduce a new copy-label component, that can be clicked to copy strings; use in info-card and list view for entites such as IP addresses and UUIDs
- Add router-link to /zones/ in case of user-accounts (when /zone isn't routable in the UI)
- Show better list of nics and ssh keys pairs in infocard for VM resource view
- Standardise most resources to show state/status columns right after resource name (wherever applicable)
- Remove displayname column in VM list view, add cpu number and memory by default
- Add k8s version column in k8s list view
- Add size and phy size columns in case of template and ISOs list view, only for root/domain admins
- Add phy network router-link in case of guest VLAN list view; rearrange columns list for consistency
- Add snapshot phy size column in the snapshot list view; and router-link for volume in the snapshot list view; and missing/useful details in the volume snapshot details view
- Add a create and add data disk feature in Instances tab, just like we've add nic feature in the same
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.18:
UI: allow new keys for VM details (#7793)
Refactoring StorPool's smoke tests (#7392)
UI: decode userdata in EditVM dialog (#7796)
packaging: unalias cp before package upgrade (#7722)
make NoopDbUpgrade do a systemvm template check (#7564)
UI unit test: fix expected values (#7792)
Since Kubernetes v1.24.0, there is no auto-generation of secret-based service account token due to security reason. see https://github.com/kubernetes/kubernetes/pull/108309
To access kubernetes dashboard, users need to create a service account and an optional long-lived Bearer Token for the service account.
There are tools like cluster-api which create and manage kubernetes cluster on CloudStack. This PR adds the option to add unmanaged kubernetes cluster which are not managed by CKS plugin. This helps provide a consolidated view of unmanaged clusters on CloudStack. The changes done make sure that operations for managed clusters are not executed for unmanaged clusters.
Two new APIs have also been added:
1. addVirtualMachinesToKubernetesCluster - to add VMs to unmanaged clusters.
2. removeVirtualMachinesFromKubernetesCluster - to remove VMs to unmanaged clusters.
Two APIs have been updated:
1. createKubernetesCluster - made KUBERNETES_VERSION_ID, SERVICE_OFFERING_ID, SIZE as not required for unmanaged clusters. Add an additional parameter, managed, which is true by default.
2. listKubernetesClusters - Add a parameter managed to filter on managed field.
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: dahn <daan.hoogland@gmail.com>
* Guest OS mapping improvements
- Checks the OS mapping name in hypervisor (VMware, XenServer)
- Displays guest OS mappings in UI
* Added API getHypervisorGuestOsNames to list the guest OS names in the hypervisor, and code improvements
* Some static analysis fixes
* Removed commented code in listview
* Guest OS list
* UI changes for adding guest os and mappings
* Added guest os mappings in guest os form
* Added new filter to guest os mapping
* Name and description changes
* VMWare Host and cluster MO unit tests
* CheckGuestOsMapping command and answer unit tests
* GetHypervisorGuestOsNames command and answer unit tests
* VmwareResource unitests
* GuestOsMapper unittests
* icon changes
* Addressed review comments
* Renaming fixes
* Removed comments
* marvin tests for guest os operations
* Added marvin tests for OS mappings
* Document links and UI improvements
* Added deduplication for the list guest OS API
* Fixed linter failure
* Few bug fixes and UI changes
* Few improvements
* Addressed code smells
* Fixed UI issues after rebase
---------
Co-authored-by: Suresh Kumar Anaparti <sureshkumar.anaparti@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
This PR adds two vm setting for user vms on KVM
- nic multiqueue number
- packed virtqueues enabled . optional are true and false (false by default). It requires qemu>=4.2.0 and libvirt >=6.3.0
Tested ok on ubuntu 22 and rocky 8.4
Some UI actions were missing title and description in pollJob method preventing notification for them to be published.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Better hover label and message for generate API/secret keys form
* Added a message to select network during instance deployment
* Removed project icon in dashboard listing
* Disable network operations for the user who does not have permission
* UI allignments
* added document help for sticky policy secion under load balancer
* Added tooltips and some form layout changes
* donot display options to configure when stickypolicy is none
* Network selection message allignment
* Fixed the grid view to be uniform in infra summary page
This PR allows admin to filter resources by state for systemvms, router & storagepool. This is part of #7366 .
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Abhisar Sinha
Vishesh
Bernardo De Marco Gonçalves
Nicolas Vazquez
Wei Zhou
Rohit Yadav
Abhishek Kumar
NuxRo
Gabriel Pordeus Santos
Pearl Dsilva
dahn
Suresh Kumar Anaparti
Fabricio Duarte
Bryan Lima
Oleg Chuev
Leo
Andrija Panic
kishankavala
Rene Glover
João Jandre
vladimirpetrov
Harikrishna
sato03
David Jumani
kiranchavala
Eduardo Zanetta
slavkap
Rodrigo D. Lopez
John Bampton
Alexandre Mattioli