In order to make sure next time, booting process would use cloud-early-config's
setup, rather than networking scripts to bring up interfaces.
Reviewed-by: Kelven Yang
Summary of changes: Added Hairpin Nat.
- defined Harpin NAT function.
- Called Hairpin NAT while adding/deleting port forwading and Static NAT rules.
- added rules in IPtables config file, this will be iniated during bootup to forward New/established connectons from eth0 to eth0.
I can't see why we set eth0 to dhcp by default. It would result in eth0 want to
get a DHCP address from outside. We should always assign ip through
cloud-early-config for it.
But one point is, the priority of cloud-early-config and networking script is
the same. So even networking got some ip from outside, cloud-early-config
should able to override it(if cloud-early-config runs after networking) or
networking script won't get dhcp (if cloud-early-config runs before networking),
so I am not quite understand why router would get DHCP address in fact. Maybe
there are other issues.
Summary of changes :
- Added a new flag -s to ipassoc command to carry if the ip address is
used for SNAT or not.
- SNAT is completly decoupled from the first flag. first flag is used
to decide if the ip address is first ip address of the interface.
- -s and -f are independent, SNAT can be enabled on the non-first ip
also.
Summary of changes:
- Mutiple routing table for each public interface is added (previously there is only one routing table ). when the packet is send out of public interface corresponding per-interface routing table will be used. per-interface routing table will modified when ever ip/interface added/deleted.
- New parameter is added to ipassoc command to include the default gateway for every interface/ip. prevously it is using only one public interface to send out, default gateway is obtained at the boot up time.
- In the DNAT case. In the revese path(from guest vm to outside, or when DNAT packet receives from the eth0) the public ip/source ip will not be available till POSTROUTING. to overcome this, DNAT connection are marked with routing table number at the time of connection creation, in the reverse path the routing table# from DNAT connection is used to detect per-interface routing table.
The following are summary of changes:
1) when network.disable.rpfilter is set to true, then rp_filter will be disadbled(set to 0) on all the public interfaces and also default setting of the system.
2) when network.disable.rpfilter is set to false, then rp_filter will be enabled(set to 1) on all the public interfaces and also default setting of the system.
3) here public public interface means , eth2 ... ethN. default setting means (/proc/sys/net/ipv4/conf/default/rp_filter).
4) Default setting change will have impact on non-public interface. Due to these, rp_filter is always enabled on Non-public interfaces(eth0,eth1 and lo).
5) when a new public interface is created, new interface will take rp_filter value from the default setting.
The following are summary of changes:
1) when network.disable.rpfilter is set to true, then rp_filter will be disadbled(set to 0) on all the public interfaces and also default setting of the system.
2) when network.disable.rpfilter is set to false, then rp_filter will be enabled(set to 1) on all the public interfaces and also default setting of the system.
2) here public public interface means , eth2 ... ethN. default setting means (/proc/sys/net/ipv4/conf/default/rp_filter).
3) Default setting change will have impact on non-public interface.if there is no specific setting for other interfaces in /etc/sysctl.conf or otherexplict setting , they will follow this default settings. currently non-public interface like eth0 ,eth1 does not have any specific setting in sysctl.conf, due to this there rp_filters will be changed when ever network.disable.rpfilter setting is changed.
4) default setting is required to changes beacuse when a new public interface is created, new interface will take rp_filter value from the default setting.
anthony
Murali Reddy
Alena Prokharchyk
Sheng Yang
JohnZ
Naredula Janardhana Reddy
frank
Sheng Yang
Chiradeep Vittal
Edison Su
Edison Su
Kelven Yang