CLOUDSTACK-5806: add presetup to storage types that support over provisioning
Ideally this should be configurable via global settings
* pr/1958:
CLOUDSTACK-5806: add presetup to storage types that support over provisioning Ideally this should be configurable via global settings
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This closes#1644
* 4.9:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage.
This is the same as PR #1644 applied to 4.9, as per @jburwell
* pr/1697:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UIJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9438
### Introduction
From #1361 it was possible to configure NFS version for secondary storage mount.
However, changing NFS version requires inserting an new detail on `image_store_details` table, with `name = 'nfs.version'` and `value = X` where X is desired NFS version, and then restarting management server for changes to take effect.
Our improvement aims to make NFS version changeable from UI, instead of previously described workflow.
### Proposed solution
Basically, NFS version is defined as an image store ConfigKey, this implied:
* Adding a new Config scope: **ImageStore**
* Make `ImageStoreDetailsDao` class to extend `ResourceDetailsDaoBase` and `ImageStoreDetailVO` implement `ResourceDetail`
* Insert `'display'` column on `image_store_details` table
* Extending `ListCfgsCmd` and `UpdateCfgCmd` to support **ImageStore** scope, which implied:
** Injecting `ImageStoreDetailsDao` and `ImageStoreDao` on `ConfigurationManagerImpl` class, on `cloud-server` module.
### Important
It is important to mention that `ImageStoreDaoImpl` and `ImageStoreDetailsDaoImpl` classes were moved from `cloud-engine-storage` to `cloud-engine-schema` module in order to Spring find those beans to inject on `ConfigurationManagerImpl` in `cloud-server` module.
We had this maven dependencies between modules:
* `cloud-server --> cloud-engine-schema`
* `cloud-engine-storage --> cloud-secondary-storage --> cloud-server`
As `ImageStoreDaoImpl` and `ImageStoreDetailsDao` were defined in `cloud-engine-storage`, and they needed in `cloud-server` module, to be injected on `ConfigurationManagerImpl`, if we added dependency from `cloud-server` to `cloud-engine-storage` we would introduce a dependency cycle. To avoid this cycle, we moved those classes to `cloud-engine-schema` module
* pr/1615:
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage
* 4.6:
[UI] bug fix: Delete added ACL lists is not available for Domain Admin and normal users
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
[4.6] CLOUDSTACK-4787 - vmware diskcontrollersSame as #1131 (see this for screenshots etc)
* pr/1132:
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9047 rename enumsmake enums adhere to best practice naming conventions
* pr/1049:
CLOUDSTACK-9046 rename enums to adhere to naming conventions
CLOUDSTACK-9046 renamed enums in kvm plugin
CLOUDSTACK-9047 use 'State's only with context there are more types called 'State' (or to be called so but now 'state') So remove imports and prepend their enclosing class/context to them.
Signed-off-by: Daan Hoogland <daan@onecht.net>
* 4.6:
CLOUDSTACK-9075 - Uses the same vlan since it should have been already released
CLOUDSTACK-9075 - Adds VPC static routes test
CLOUDSTACK-9075 - Covers Private GW ACL with Redundant VPCs
CLOUDSTACK-9075 - Add method to get list of Physical Networks per zone
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
CLOUDSTACK-6276 Fixing affinity groups for projectsWith some contributions from @resmo and @ustcweizhou.
This closes https://github.com/apache/cloudstack/pull/508
To test manually (need at least 2 hosts):
Create a project
Create an affinity group in that project
Deploy a vm with that affinity group
Deploy a second vm with that affinity group
They should be on different hosts
Ran old and new tests for affinity groups on the simulator
Test create affinity group as admin in project ... === TestName: test_01_admin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as domain admin for projects ... === TestName: test_02_doadmin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as user for projects ... === TestName: test_03_user_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) for projects ... === TestName: test_4_user_create_aff_grp_existing_name_for_project | Status : SUCCESS ===
ok
#Delete Affinity Group by id. ... === TestName: test_01_delete_aff_grp_by_id | Status : SUCCESS ===
ok
#Delete Affinity Group by id should fail for user not in project ... === TestName: test_02_delete_aff_grp_by_id_another_user | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_01_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups with more vms than hosts. ... === TestName: test_02_deploy_vm_anti_affinity_group_fail_on_not_enough_hosts | Status : SUCCESS ===
ok
List affinity group for a vm for projects ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm for projects ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id for projects ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name for projects ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id for projects ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name for projects ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group for projects ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 16 tests in 581.706s
OK
Deploy vm as Admin in Affinity Group belonging to regular user (should fail) ... === TestName: test_01_deploy_vm_another_user | Status : SUCCESS ===
ok
Create Affinity Group as admin for regular user ... === TestName: test_02_create_aff_grp_user | Status : SUCCESS ===
ok
List Affinity Groups as admin for all the users ... === TestName: test_03_list_aff_grp_all_users | Status : SUCCESS ===
ok
List Affinity Groups belonging to admin user ... === TestName: test_04_list_all_admin_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing account id and domain id ... === TestName: test_05_list_all_users_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing group id ... === TestName: test_06_list_all_users_aff_grp_by_id | Status : SUCCESS ===
ok
Delete Affinity Group belonging to regular user ... === TestName: test_07_delete_aff_grp_of_other_user | Status : SUCCESS ===
ok
Test create affinity group as admin ... === TestName: test_01_admin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as domain admin ... === TestName: test_02_doadmin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as user ... === TestName: test_03_user_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) ... === TestName: test_04_user_create_aff_grp_existing_name | Status : SUCCESS ===
ok
Test create affinity group with existing name but within different account ... === TestName: test_05_create_aff_grp_same_name_diff_acc | Status : SUCCESS ===
ok
Test create affinity group of non-existing type ... === TestName: test_06_create_aff_grp_nonexisting_type | Status : SUCCESS ===
ok
Delete Affinity Group by name ... === TestName: test_01_delete_aff_grp_by_name | Status : SUCCESS ===
ok
Delete Affinity Group as admin for an account ... === TestName: test_02_delete_aff_grp_for_acc | Status : SUCCESS ===
ok
Delete Affinity Group which has vms in it ... === TestName: test_03_delete_aff_grp_with_vms | Status : SUCCESS ===
ok
Delete Affinity Group with id which does not belong to this user ... === TestName: test_05_delete_aff_grp_id | Status : SUCCESS ===
ok
Delete Affinity Group by name which does not belong to this user ... === TestName: test_06_delete_aff_grp_name | Status : SUCCESS ===
ok
Delete Affinity Group by id. ... === TestName: test_08_delete_aff_grp_by_id | Status : SUCCESS ===
ok
Root admin should be able to delete affinity group of other users ... === TestName: test_09_delete_aff_grp_root_admin | Status : SUCCESS ===
ok
Deploy VM without affinity group ... === TestName: test_01_deploy_vm_without_aff_grp | Status : SUCCESS ===
ok
Deploy VM by aff grp name ... === TestName: test_02_deploy_vm_by_aff_grp_name | Status : SUCCESS ===
ok
Deploy VM by aff grp id ... === TestName: test_03_deploy_vm_by_aff_grp_id | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_04_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
Deploy vms by affinity group id ... === TestName: test_05_deploy_vm_by_id | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by name ... === TestName: test_06_deploy_vm_aff_grp_of_other_user_by_name | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by id ... === TestName: test_07_deploy_vm_aff_grp_of_other_user_by_id | Status : SUCCESS ===
ok
Deploy vm in multiple affinity groups ... === TestName: test_08_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy multiple vms in multiple affinity groups ... === TestName: test_09_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy VM by aff grp name and id ... === TestName: test_10_deploy_vm_by_aff_grp_name_and_id | Status : SUCCESS ===
ok
List affinity group for a vm ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupnames ... === TestName: test_02_update_aff_grp_by_names | Status : SUCCESS ===
ok
Update the list of affinityGroups for vm which is not associated ... === TestName: test_03_update_aff_grp_for_vm_with_no_aff_grp | Status : SUCCESS ===
ok
Update the list of Affinity Groups to empty list ... SKIP: Skip - Failing - work in progress
Update the list of Affinity Groups on running vm ... === TestName: test_05_update_aff_grp_on_running_vm | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 42 tests in 976.432s
OK (SKIP=1)
* pr/1134:
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9022: move storage.cleanup related global configurations to StorageManager
CLOUDSTACK-9022: keep Destroyed volumes for sometime
Conflicts:
server/src/com/cloud/storage/StorageManagerImpl.java
CLOUDSTACK-8868: use PasswordGenerator.generateRandomPassword() to generate systemvm passwordsgenerateRandomPassword() is supposed to create root user passwords. Right now it is only used on the guest VMs. The format of the passwords it creates are of the form "random 3-character string with a lowercase character, uppercase character, and a digit" + random n-character string with only lowercase characters".
For whatever reason it was that we use generateRandomPassword() for guest VM root user passwords(maybe more secure?) we should use the same function for system VM root user passwords.
Tests:
manually tested that password is generated in proper format and am able to login to cpvm with the new password. ex: zD2ztm, tR8snbwhq
```
$ mvn -pl server test -Dtest=ConfigurationServerImplTest#testUpdateSystemvmPassword
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running com.cloud.server.ConfigurationServerImplTest
log4j:WARN No appenders could be found for logger (com.cloud.utils.crypt.EncryptionSecretKeyChecker).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info.
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.487 sec - in com.cloud.server.ConfigurationServerImplTest
Results :
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 7.781 s
[INFO] Finished at: 2015-09-16T14:17:07+05:30
[INFO] Final Memory: 60M/466M
[INFO] ------------------------------------------------------------------------
```
* pr/841:
CLOUDSTACK-8868: change the default vm.password.length to 10
CLOUDSTACK-8868: use same method to generate passwords for system/guest vms
removed commented code
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] CLOUDSTACK-8958: add dedicated ips to domain (account for now)For now, we dedicate ip pool to account, however, other accounts in the same domain cannot fetch the ip from this ip pool.
By dedicating ip pool to domain, accounts in the domain can fetch the public ip from same ip pool.
* pr/1007:
CLOUDSTACK-8958: throw an exception if project account cannot be found
CLOUDSTACK-8958: add dedicated ips to domain (account for now)
Signed-off-by: Remi Bergsma <github@remi.nl>
- Adds new controller types in the UI, for selecting root disk controller while
registering templates
- Fixes bug to not override disk controller type if provided in the details (either
vm details or from template details)
(cherry picked from commit c7d67628b3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removed unnecessary @Local annotations and their respective importsFollowing @rafaelweingartner 's findings in PR #714 that many spring beans contained an @Local annotation, we've decided to remove said annotations and their imports from the ComponentLifecycleBase class and its subclasses seeking a reduction of a few hundred lines of useless code.
I had already opened a pull request for this (#853) but at some point my commit disappeared from the PR entirely, showing no new changes in code, which caused it to be merged automatically (with no changes).
* pr/1102:
Removed unnecessary @Local annotations and their respective imports from the ComponentLifecycleBase class and its subclasses.
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] CLOUDSTACK-8951: validation for config param "remote.access.vpn.psk.length"throwing error for value < 8 and value > 256
right now, 8, 256 are hardcoded in the code. They should be moved to a
constant and has to be reused everywhere.
will update with test cases/testing later.
* pr/929:
CLOUDSTACK-8951: validation for "remote.access.vpn.psk.length"
Signed-off-by: Remi Bergsma <github@remi.nl>
throwing error for value < 8 and value > 256
right now, 8, 256 are hardcoded in the code. They should be moved to a
constant and has to be reused everywhere.
This reverts commit cd7218e241, reversing
changes made to f5a7395cc2.
Reason for Revert:
noredist build failed with the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.2:compile (default-compile) on project cloud-plugin-hypervisor-vmware: Compilation failure
[ERROR] /home/jenkins/acs/workspace/build-master-noredist/plugins/hypervisors/vmware/src/com/cloud/hypervisor/guru/VMwareGuru.java:[484,12] error: non-static variable logger cannot be referenced from a static context
[ERROR] -> [Help 1]
even the normal build is broken as reported by @koushik-das on dev list
http://markmail.org/message/nngimssuzkj5gpbz
* Move config options to SAML plugin
This moves all configuration options from Config.java to SAML auth manager. This
allows us to use the config framework.
* Make SAML2UserAuthenticator validate SAML token in httprequest
* Make logout API use ConfigKeys defined in saml auth manager
* Before doing SAML auth, cleanup local states and cookies
* Fix configurations in 4.5.1 to 4.5.2 upgrade path
* Fail if idp has no sso URL defined
* Add a default set of SAML SP cert for testing purposes
Now to enable and use saml, one needs to do a deploydb-saml after doing a deploydb
* UI remembers login selections, IDP server
- CLOUDSTACK-8458:
* On UI show dropdown list of discovered IdPs
* Support SAML Federation, where there may be more than one IdP
- New datastructure to hold metadata of SP or IdP
- Recursive processing of IdP metadata
- Fix login/logout APIs to get new interface and metadata data structure
- Add org/contact information to metadata
- Add new API: listIdps that returns list of all discovered IdPs
- Refactor and cleanup code and tests
- CLOUDSTACK-8459:
* Add HTTP-POST binding to SP metadata
* Authn requests must use either HTTP POST/Artifact binding
- CLOUDSTACK-8461:
* Use unspecified x509 cert as a fallback encryption/signing key
In case a IDP's metadata does not clearly say if their certificates need to be
used as signing or encryption and we don't find that, fallback to use the
unspecified key itself.
- CLOUDSTACK-8462:
* SAML Auth plugin should not do authorization
This removes logic to create user if they don't exist. This strictly now
assumes that users have been already created/imported/authorized by admins.
As per SAML v2.0 spec section 4.1.2, the SP provider should create authn requests using
either HTTP POST or HTTP Artifact binding to transfer the message through a
user agent (browser in our case). The use of HTTP Redirect was one of the reasons
why this plugin failed to work for some IdP servers that enforce this.
* Add new User Source
By reusing the source field, we can find if a user has been SAML enabled or not.
The limitation is that, once say a user is imported by LDAP and then SAML
enabled - they won't be able to use LDAP for authentication
* UI should allow users to pass in domain they want to log into, though it is
optional and needed only when a user has accounts across domains with same
username and authorized IDP server
* SAML users need to be authorized before they can authenticate
- New column entity to track saml entity id for a user
- Reusing source column to check if user is saml enabled or not
- Add new source types, saml2 and saml2disabled
- New table saml_token to solve the issue of multiple users across domains and
to enforce security by tracking authn token and checking the samlresponse for
the tokens
- Implement API: authorizeSamlSso to enable/disable saml authentication for a
user
- Stubs to implement saml token flushing/expiry
- CLOUDSTACK-8463:
* Use username attribute specified in global setting
Use username attribute defined by admin from a global setting
In case of encrypted assertion/attributes:
- Decrypt them
- Check signature if provided to check authenticity of message using IdP's
public key and SP's private key
- Loop through attributes to find the username
- CLOUDSTACK-8538:
* Add new global config for SAML request sig algorithm
- CLOUDSTACK-8539:
* Add metadata refresh timer task and token expiring
- Fix domain path and save it to saml_tokens
- Expire hour old saml tokens
- Refresh metadata based on timer task
- Fix unit tests
This closes#489
(cherry picked from commit 20ce346f3a)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
client/WEB-INF/classes/resources/messages_hu.properties
plugins/hypervisors/xenserver/src/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixCheckHealthCommandWrapper.java
plugins/user-authenticators/saml2/src/org/apache/cloudstack/api/command/SAML2LoginAPIAuthenticatorCmd.java
ui/scripts/ui-custom/login.js
Rajani Karuturi
Rajani Karuturi
Abhinandan Prateek
Jayapal
Bharat Kumar
Sigert Goeminne
pallavi_dumbre
Suresh Kumar Anaparti
Rohit Yadav
Nitin Kumar Maharana
Frank Maximus
nvazquez
Syed
Mike Tutkowski
Nathan Johnson
nvazquez
jeff
Remi Bergsma
Daan Hoogland
Wei Zhou
Patrick Dube
cirstofolini
Rajani Karuturi
Nick Livens
Boris Schrijver
Rene Moser
Rafael Weingartner
Damodar