service and not used for LB
Fix adds a boolean flag to addNetscalerLoadBalancer api, which
will mark added NetScaler for exclusive GSLB service. A netscaler marked
as exclusive gslb service provider is not picked for any guest network's
lb provider.
scaling up vms was not considering parameter cluster.(memory/cpu).allocated.capacity.disablethreshold. Fixed it
Also added overprovisioning factor retrieval at the cluster level for host capacity check
This patch adds support for trust chains in the netscaler.
I initially planned on using the 10.1 API's "bundle" feature but during
my testing I found that was not working. So I am doing the chain linking
myself. Also NS can have only one entity of a certificate ie lets say
two different users try to add the same certificate on the netscaler
only one of them will go through. The other one says resouce already
exists even though they have different files.
This can be a problem in trust chains where the chain can be shared
between multiple accounts/certificates. So, I am using the figerprint as
an identifier of a certificate and making sure that we delete it only
when no one references it.
Resource limit shouldnt be counted for resources with display flag = 0. Adding functions to resourcelimitmanager and doing it for the volumes at the moment.
used cpu is getting bumped up when the over provisioning factor > 1. This was because we didnt record the overprovisioning factors of the vms which got deployed pre 4.2
Upgrade path will fix that by populating the cpu/mem overprovisioning factors for each of the vms in user_vm_details table using the global overprovisioning factor.
Reviewed by : bharat kumar <bharat.kumar@citrix.com>
Signed off by : nitin mehta<nitin.mehta@citrix.com>
If the VM has snapshots then the chain_info of a volume can be longer than 255 characters.
Increasing the column length of chain_info in VolumeVO to match the maximum length of type text(db schema type)
Now VPN connection can be created as "passive", which would enable the ability
of remote peer initiate the connection. So it's possible for VPC VR to
establish the connection to another VPC VR of CloudStack.
Test case also included.
The test case would create 2 vpcs and using VPN to connect them.
1) added createDetail to ResourceDetailDao interface to provide generic way of creating resourceDetail DB objects
2) added resource details support for firewall rules
1) Added support for Zone resource details
2) Renamed DcDetailsDao to DataCenterDetailsDao to follow the CS name convention for DataCenter related classes
* changed name for TaggedResourceType enum to ResourceObjectType as this enum is used both by ResourceMetaData and ResourceTags code
* enhanced the enum with extra fields resourceTagsSupport (boolean) and metadataSupport identifying if the resource supports tags and/or metadata.
* cleanup unused @Inject objects from the ResourceMetaDataManager
xs 6.1/6.2 introduce the new virtual platform, so there are two virtual platforms, windows PV driver version must match virtual platforms,
this patch tracks PV driver versions in vm details and template details.
Anthony
list Clusters/pods/zones API not accounting for reserved in the used capacity percentage.
Fix listCapacity cmd for reserved as well
Signed off by : nitin mehta<nitin.mehta@citrix.com>
Introduction of a new Transaction API that is more consistent with the style
of Spring's transaction managment. The existing Transaction class was renamed
to TransactionLegacy. All of the non-DAO code in the management server has been
updated to use the new Transaction API.
When running DatabaseUpgradeChecker as a standalone program _dao will not
be injected. Still create an instance of VersionDaoImpl in constructor
and when DatabaseUpgradeChecker is ran in the mgmt server it will be
overwritten by the injected value.
ACS is now comprised of a hierarchy of spring application contexts.
Each plugin can contribute configuration files to add to an existing
module or create it's own module.
Additionally, for the mgmt server, ACS custom AOP is no longer used
and instead we use Spring AOP to manage interceptors.
Also fixed existing bugs for the API:
* corrected action event to be VOLUME.UPDATE (was VOLUME.ATTACH)
* all parameters to update, should be optional - fixed that. If nothing is specified, the db object will remain with its original fields
Check for the all the transition states for Maintenance. Also corrected the isMaintenance function for StoragePoolVo
Signed off by : nitin mehta<nitin.mehta@citrix.com>
Description:
Set the criterion for overriding/preserving the vmware.create.full.clone
flag so that if past version deployments have any deployments (data centers),
this flag will be set to false. Else, it will be set to true.
The earlier criterion to set this flag was based on the CS version numbers,
but that is not a good business logic to serve as a basis to set the flag.
Changes:
- In the upgrade path, for a private zone, entry needs to be added in the affinity_group_domain_map to provide access to the private zone for the domains it belongs too.
Changes:
- Implict creation of the 'ExplicitDedication' Affinity group during resource dedication
- Only one group per account or per domain will be present
- ListDedicatedResources by affinityGroup
- Deployment should consider dedicated resources associated to the group only
- Deleting affinity group should release the dedicated resouces
- Releasing the dedicated resources should remove the group associated if there are no more resources.
Conflicts:
plugins/dedicated-resources/src/org/apache/cloudstack/dedicated/DedicatedResourceManagerImpl.java
plugins/dedicated-resources/test/org/apache/cloudstack/dedicated/manager/DedicatedApiUnitTest.java
server/src/com/cloud/configuration/ConfigurationManagerImpl.java
Changes:
- 'ExcplicitDedication' type of group can be created/deleted by Root admin only
- Users can no longer create this type of affinity group
- RootAdmin can create this type of affinitygroup at domain level. Such a domain level group is available for all accounts in that domain for listing and for use during deployVM.
- The domain level affinitygroup should be visible to the users in that domain, domain admins and Root admin.
Conflicts:
server/src/com/cloud/api/query/QueryManagerImpl.java
server/src/org/apache/cloudstack/affinity/AffinityGroupServiceImpl.java
server/test/org/apache/cloudstack/affinity/AffinityApiUnitTest.java
On a fresh environment, some values in cloud.configuration table are persisted in com.cloud.server.ConfigurationServerImpl.persistDefaultValues()
A default value need to be set before com.cloud.upgrade.DatabaseUpgradeChecker
UI support for baremetal PXE server
CloudStack CLOUDSTACK-1364
UI support for baremetal DHCP server
Conflicts:
plugins/hypervisors/baremetal/src/com/cloud/baremetal/networkservice/BareMetalPingServiceImpl.java
plugins/hypervisors/baremetal/src/com/cloud/baremetal/networkservice/BaremetalKickStartServiceImpl.java
plugins/hypervisors/baremetal/src/com/cloud/baremetal/networkservice/BaremetalPxeManagerImpl.java
While upgrading to 4.2, the type of vswitch being used by each cluster is persisted to cluster_details table. This helps if user want to change the type of vswitch used in a zone or entire cloud later on but leave existing cluster continue to use old vswitches. Hence even after modifying the type of vswitch at cloud level (by modifying global configuration parameters) or modifying the type vswitch at zone level (by modifying the traffic label) would not disturb operation of existing clusters.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
only when there is portable IP range added at region level.
region response will now have details if portable IP service is enabled
or not. Portable IP service for a region is turned off by default. when
adming adds a portable ip range portable ip service is enabled for the
region.
Updating the new system template URLs for the existing templates during upgrade to 4.2.
If new 4.2 system template is registered before upgrade then marking the old templates as removed during upgrade.
The time increased due to the newly added dedicated resources feature. During regular VM deployment, all dedicated resources are put in avoid list so that they are not considered for deployment.
Now the way to compute the list of dedicated resources is not optimal and performance deteriorates in an environment having lot of pods, clusters and hosts as the logic is to query db. for each suc resource.
The fix is to optimize the logic not to loop through all resources but get the list of each resource type in a single query.
Conflicts:
server/src/com/cloud/deploy/DeploymentPlanningManagerImpl.java
Snapshot object is being accessed even when it is null. In case snapshot is not present in backup store the code should return after cleaning db entry.
Also noticed discrepancy in the upgraded db setup but couldn't fully verify it, so added logging in the upgrade logic for template/snapshots etc.
Track the Datacenter of previous cluster correctly while going through each cluster in the zone to see if 2 clusters are from different DC/vCenter.
Cherry picked from 4.2 commit a3450afff5
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
System template upgrade is not required during 4.0 upgrade since we handle the same during 4.2 upgrade. So removing the system template update during 4.0 upgrade.
KVM.snapshot.enabled is lowercased by f025db95 to keep the configs
uniformly lower-case. But it missed the upgrade script and the
references in SnapshotManagerImpl. This commit will fix the issue in all
locations
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
(cherry picked from commit 0e216fa7e41bdfe0cc744006bb896c8b00138ca2)
Persist the download url in the db for volume download.
Signed off by : nitin mehta<nitin.mehta@citrix.com>
Conflicts:
server/src/com/cloud/storage/VolumeManagerImpl.java
Marked the system template new system template as dynamicallyScalable
- handled upgrade case
- moved "dynamicallyScalable" flag to vm_instance table from user_vm_details to support dynamic scaling of system vm
Signed off by : Nitin Mehta<nitin.mehta@citrix.com>
Changes:
- During host deletion, host entry in databse gets removed prior to the disconnect task getting processed.
- This causes the disconnect task to get NPE while trying to do the host state transition
The issue is that while calculating the used primary storage size, the updateResourceCount
API is also calculating the disk size of virtual router VM, created for that account and
because of this, the API is returning the incorrect result.
Changes:
- Locking the group and save reservation mechanism done by DPM
- Added admin operation to cleanup VM reservations
- DPM will also cleanup VM reservations on startup
User should be able to delete/archive alerts and events by selecting a time period or by
choosing the alerts and events older than a date. Added the ability to choose a time period
too.
Summary of changes in the fix
- Optimized host scan logic, now instead of iterating over each cluster host scan is done for a batch of clusters
- Made host scan task interval configurable
only on first rule is created on the IP and last rule is revoked on the
IP
Current suboptima logic of IP Assoc
- On associate IP to GuestNetwork there is an IPAssoc command sent to
corresponding network service providers of the network
- On every rule apply on IP associated with the network send IP assoc
to the network service providers
- On every rule deletion on IP associated with a network sernd IP assoc
command to the network service providers
With this fix logic of IP assoc is changed as below which eliminates
executio of unnessary and expensive IpAssocCommand resource command
- On associate IP to GuestNetwork, associate IP only to the network,
Untill any service is associated with the IP dont send IP Assoc
- On creation of first rule on the IP send IPAssoc to corresponding
network service provider. Since IP is used for a service, IPAssoc
need to be sent to correpondign service provider
- On deletion of last rule on the IP send IPAssoc to corresponding
network service provider. When last rule is deleted, IP has no
service associated with it, so send IP assoc to service provider to
remove the IP association
involved in the GSLB
add weights to each site participating in the GSLB. Traffic will be load
balanced across the sites based on the weigths associated with each
site. If not specified weight of site is defaulted to 1.
NAT does not work
making an exception for portabe IP, so that if the current datacenter with
portable IP is associated is different from destiantion data center
also on transfer on to new zone, transfer the portable ip association to
new data center, physical network id's
CLOUDSTACK-3042 - handle Scaling up of vm memory/CPU based on the presence of XS tools in the template
This also takes care of updation of VM after XS tools are installed in the vm and set memory values accordingly to support dynamic scaling after stop start of VM
Signed-off-by: Abhinandan Prateek <aprateek@apache.org>
has dedicated resources and the dedicated resources have all been consumed - use.system.public.ips and use.system.guest.vlans
Both configs are configurable at the account level too.
Recurring snapshot schedule not showing up in UI
For some of the volumes Recurring snapshot schedule was not showing up in UI because the active column was set to false. Since we dont use this column anymore I am removing the active=true check in the listSnapshotPolicies call.
combination prior to 3.0 release
Fix does following:
- add F5 network service provider into a physical network if there if F5
deployed in the zone
- add instance of F5 network service provider
- add SRX network service provider into a physical network if there if
SRX deployed in the zone
- add instance of SRX network service provider
- upgrade all the guest networks to network offering '"Isolated with
external providers"
Upgrade handling.
Detect legacy zones during db upgrade and perform data migration.
If legacy zone is detected the table 'cloud'.'legacy_zones' is populated.
If an existing zone which has resources that belong to single VMware datacenter then such zone would not be marked as legacy zone. Such zone would be automatically associated with the specific Vmware datacenter of the clusters inside the zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
This feature allows a user to deploy VMs only in the resources dedicated to his account or domain.
1. Resources(Zones, Pods, Clusters or hosts) can be dedicated to an account or domain.
Implemented 12 new APIs to dedicate/list/release resources:
- dedicateZone, listDedicatedZones, releaseDedicatedZone for a Zone.
- dedicatePod, listDedicatedPods, releaseDedicatedPod for a Pod.
- dedicateCluster, listDedicatedClusters, releaseDedicatedCluster for a Cluster
- dedicateHost, listDedicatedHosts, releaseDedicatedHost for a Host.
2. Once a resource(eg. pod) is dedicated to an account, other resources(eg. clusters/hosts) inside that cannot be further dedicated.
3. Once a resource is dedicated to a domain, other resources inside that can be further dedicated to its sub-domain or account.
4. If any resource (eg.cluster) is dedicated to a account/domain, then resources(eg. Pod) above that cannot be dedicated to different accounts/domain (not belonging to the same domain)
5. To use Explicit dedication, user needs to create an Affinity Group of type 'ExplicitDedication'
6. A VM can be deployed with the above affinity group parameter as an input.
7. A new ExplicitDedicationProcessor has been added which will process the affinity group of type 'Explicit Dedication' for a deployment of a VM that demands dedicated resources.
This processor implements the AffinityGroupProcessor adapter. This processor will update the avoid list.
8. A VM requesting dedication will be deployed on dedicatd resources if available with the user account.
9. A VM requesting dedication can also be deployed on the dedicated resources available with the parent domains iff no dedicated resources are available with the current user's account or
domain.
10. A VM (without dedication) can be deployed on shared host but not on dedicated hosts.
11. To modify the dedication, the resource has to be released first.
12. Existing Private zone functionality has been redirected to Explicit dedication of zones.
13. Updated the db upgrade schema script. A new table "dedicated_resources" has been added.
14. Added the right permissions in commands.properties
15. Unit tests: For the new APIs and Service, added unit tests under : plugins/dedicated-resources/test/org/apache/cloudstack/dedicated/DedicatedApiUnitTest.java
16. Marvin Test: To dedicate host, create affinity group, deploy-vm, check if vm is deployed on the dedicated host.
Squashed commit of the following:
commit f244f9ce7982db16984dd87c31545f1c0240c704
Merge: 993cbb0 f5c8e38
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Mon May 20 18:54:05 2013 +0530
Merge branch 'master' into portablepublicip
Conflicts:
server/src/com/cloud/server/ManagementServerImpl.java
server/test/org/apache/cloudstack/networkoffering/ChildTestConfiguration.java
commit 993cbb0df9fa6e64b96b18ed775b73cdf4a8f5d7
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Mon May 20 18:49:54 2013 +0530
introduce 'transferPortableIP' interface method in network manger. This
method will transfer association of portable ip from one network to
another network.
commit 0c1c2652c1b39e9a81ca35464360e11ed9ef23f1
Merge: a718d35a29e393
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Fri May 17 02:48:54 2013 +0530
Merge branch 'master' into portablepublicip
Conflicts:
utils/src/com/cloud/utils/net/NetUtils.java
commit a718d353f7
Merge: ecca117c211818
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Mon May 13 21:22:19 2013 +0530
Merge branch 'master' into portablepublicip
Conflicts:
api/src/org/apache/cloudstack/api/ResponseGenerator.java
server/src/com/cloud/api/ApiResponseHelper.java
server/src/com/cloud/network/NetworkServiceImpl.java
server/src/com/cloud/network/addr/PublicIp.java
server/src/com/cloud/server/ManagementServerImpl.java
server/test/com/cloud/network/MockNetworkManagerImpl.java
server/test/com/cloud/vpc/MockConfigurationManagerImpl.java
server/test/com/cloud/vpc/MockNetworkManagerImpl.java
setup/db/db/schema-410to420.sql
commit ecca117e34
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Mon May 13 20:05:29 2013 +0530
added integration tests for testing portable ip ranges
commit 895a27c277
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Mon May 13 15:12:19 2013 +0530
- establish model for transferring portable IP association from a network
with which it is associated to another network.
- enabling static nat api, extended to transfer potrtable IP across the
networks if the VM/network is different from the current associate
network of the portable ip
commit 51509751b2
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Mon May 13 12:05:33 2013 +0530
seperate out associate/disassociate with guest network operations from
alloc and release of portable ip
commit bd058f58c2
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Sun May 12 21:14:48 2013 +0530
enhance disasociateIPAddr API to release protable IP associated with a
guest network or VPC
commit 27504d9098
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Sun May 12 16:53:45 2013 +0530
enhance asociateIPAddr API to acquire a protable IP and associate with a
guest network or VPC
commit f82c6a8431
Merge: 3dbfb440749013
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Sat May 11 23:32:13 2013 +0530
Merge branch 'master' into portablepublicip
Conflicts:
api/src/com/cloud/network/IpAddress.java
api/src/org/apache/cloudstack/api/ResponseGenerator.java
client/tomcatconf/commands.properties.in
server/src/com/cloud/api/ApiResponseHelper.java
server/src/com/cloud/configuration/ConfigurationManagerImpl.java
server/src/com/cloud/server/ManagementServerImpl.java
server/test/org/apache/cloudstack/affinity/AffinityApiTestConfiguration.java
server/test/org/apache/cloudstack/networkoffering/ChildTestConfiguration.java
setup/db/db/schema-410to420.sql
commit 3dbfb44eb5
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Sat May 11 20:33:19 2013 +0530
- add 'portable' boolean as property of IpAddress, persist the property in
IPAddressVO, return the property in IpAddressResponse
- add ability to request portable IP in associateIpAddress api
commit bf3cb274cf
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Sat May 11 16:08:40 2013 +0530
add the status of each portable IP (its state, details of associated data
center/VPC/guest network etc) in the PortableIpRangeResponse returned by
listPortableIpRanges API
commit e7b2fb2255
Author: Murali Reddy <muralimmreddy@gmail.com>
Date: Sat May 11 14:36:01 2013 +0530
Introdcues notion of 'portable IP' pool at region level.
Introduces root admin only API's to provision portable ip to a region
- createPortableIpRange
- deletePortableIpRange
- listPortableIpRanges
1. A new implicit planner which extends the functionality provided by FirstFitPlanner.
2. Implicit planner can be used in either strict or preferred mode. In strict mode it tries to deploy a vm of a given account on a host on which vms of the account are already running. If no such host is found it'll search for an empty host to service the request. Otherwise the deploy vm request fails.
3. In preferred mode, if a host which is running vms of the account or an empty host isn't found, the planner then tries to deploy on any other host provided it isn't running implicitly dedicated strict vms of any other account.
4. Updated the createServiceOffering api to configure the details for the planner that the service offering is using.
5. Made db changes to store the service offering details for the planner.
6. Unit tests for testing the implicit planner functionality.
7. Marvin test for validating the functionality.
- Changes merged from planner_reserve branch
- Exposing deploymentplanner as an optional parameter while creating a service offering
- changes to DeploymentPlanningManagerImpl to make sure host reserve-release happens between conflicting planner usages.
Public IP addresses resource count of an account - number of ip addresses dedicated to an account
plus the number of ip addresses belonging to the system that have been allocated to the account
1) Only PrivateNetworkGuru handles network creation for the private gateway. Exluded Guest Network Guru from this list (was mistakenly included as a part of merge for Nicira integration)
2) Pass vpc_id to createNetwork call when the network is created as a part of private gateway creation
3) Fixed VPC restart when there are multiple private gateways present (have to grab all the private gateways when creating nic profiles for the VPC router that is being re-created)
4) 41-42 db upgarde: set vpc_id for the private networks of the existing VPCs
Public IP addresses resource count of an account - number of ip addresses dedicated to an account
plus the number of ip addresses belonging to the system that have been allocated to the account
Jayapal
Alena Prokharchyk
Prachi Damle
Alex Huang
Antonio Fornie
Min Chen
tuna
Murali Reddy
Nitin Mehta
Syed Ahmed
Bharat Kumar
Harikrishna Patnala
Hugo Trippaers
Wido den Hollander
Kishan Kavala
Edison Su
Dave Brosius
Laszlo Hornyak
Rajesh Battala
Chris Suich
Mike Tutkowski
Kelven Yang
Likitha Shetty
Darren Shepherd
Sheng Yang
Anthony Xu
dhoogland
Wei Zhou
Darren Shepherd
Daan Hoogland
Sanjay Tripathi
Vijayendra Bhamidipati
frank
Sateesh Chodapuneedi
Koushik Das
Prasanna Santhanam
Marcus Sorensen
Chip Childers
Mice Xia
Saksham Srivastava
Koushik Das
Edison Su
Jessica Wang
Jayapal
Devdeep Singh