CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UIJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9438
### Introduction
From #1361 it was possible to configure NFS version for secondary storage mount.
However, changing NFS version requires inserting an new detail on `image_store_details` table, with `name = 'nfs.version'` and `value = X` where X is desired NFS version, and then restarting management server for changes to take effect.
Our improvement aims to make NFS version changeable from UI, instead of previously described workflow.
### Proposed solution
Basically, NFS version is defined as an image store ConfigKey, this implied:
* Adding a new Config scope: **ImageStore**
* Make `ImageStoreDetailsDao` class to extend `ResourceDetailsDaoBase` and `ImageStoreDetailVO` implement `ResourceDetail`
* Insert `'display'` column on `image_store_details` table
* Extending `ListCfgsCmd` and `UpdateCfgCmd` to support **ImageStore** scope, which implied:
** Injecting `ImageStoreDetailsDao` and `ImageStoreDao` on `ConfigurationManagerImpl` class, on `cloud-server` module.
### Important
It is important to mention that `ImageStoreDaoImpl` and `ImageStoreDetailsDaoImpl` classes were moved from `cloud-engine-storage` to `cloud-engine-schema` module in order to Spring find those beans to inject on `ConfigurationManagerImpl` in `cloud-server` module.
We had this maven dependencies between modules:
* `cloud-server --> cloud-engine-schema`
* `cloud-engine-storage --> cloud-secondary-storage --> cloud-server`
As `ImageStoreDaoImpl` and `ImageStoreDetailsDao` were defined in `cloud-engine-storage`, and they needed in `cloud-server` module, to be injected on `ConfigurationManagerImpl`, if we added dependency from `cloud-server` to `cloud-engine-storage` we would introduce a dependency cycle. To avoid this cycle, we moved those classes to `cloud-engine-schema` module
* pr/1615:
CLOUDSTACK-9438: Fix for CLOUDSTACK-9252 - Make NFS version changeable in UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9504: System VMs on Managed StorageThis PR makes it easier to spin up system VMs on managed storage.
Managed storage is when you have a dedicated volume on a SAN for a particular virtual disk (making it easier to deliver QoS).
For example, with this PR, you'd likely have a single virtual disk for a system VM. On XenServer, that virtual disk resides by itself in a storage repository (no other virtual disks share this storage repository).
It was possible in the past to spin up system VMs that used managed storage, but this PR facilitates the use case by making changes to the System Service Offering dialog (and by putting in some parameter checks in the management server).
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9504
* pr/1642:
Added support for system VMs to make use of managed storage
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Currently the logic about volume deletion seems to be that an event
should be emitted when the volume delete is requested, not when the
deletion completes.
The VolumeStateListener specifically ignores destroy events for ROOT
volumes, assuming that the ROOT volume only gets deleted when the
instance is destroyed and the UserVmManager should take care of it.
When deleting an account, all of its resources get destroyed, but the
instance expunging circumvents the UserVmManager, and thus we miss the
VOLUME_DESTROY usage event. The account manager now attempts to
propperly destroy the vm before expunging it. This way the destroy
logic is respected, including the event emission.
KVM hosts on shared storage failure was accepted by mgmt server with the
host state as Up, even though there was no primary/shared storage available on
it. This patch offers a quick fix by throwing an exception in the storage monitor
which connects storage pool on host. The failure is trapped by agent manager
that disconnects the agent without any investigation.
Based on Lab tests, KVM agent may take upto 2 minutes to attempt NFS mount when
the storage is inaccessible (firewalled, or shutdown) before returning back with
an error. It is safe to assume that this won't add pressure on mgmt server due to
several reconnection attempts, and KVM agent would retry reconnection every 2
minutes.
For such KVM hosts, where failure happens due to storage issues; they will be
briefly put in Alert state but will be mostly be in Connecting state during which
the KVM host attempts to mount/reconfigure NFS storage pool.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage
Both host and path could have been NULL which causes the StatsCollector
no to start properly.
By checking if the Strings are not Empty or Null we make sure the StatsCollector
always runs and does not prevent the Management Server from starting.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Conflicts:
server/src/com/cloud/server/StatsCollector.java
We use some JSP file just for translation of strings in the UI. This is
achievable purely in JavaScript. This removes those JSPs, simplifies
translation usage and workflow (purely JS based). The l10n js (dictionary)
files are generated from existing messages.properties files during client-ui
code generation phase.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9422: Granular 'vmware.create.full.clone' as Primary Storage setting### Introduction
For VMware, It is possible to decide creating VMs as full clones on ESX HV, adjusting `vmware.create.full.clone` global setting. We would like to introduce this property as a primary storage detail, and use its value instead of global setting's value.
We propose introducing `fullCloneFlag` on `PrimaryDataStoreTO` sent on `CopyCommand`. This way we can reconfigure `VmwareStorageProcessor` and `VmwareStorageSubsystemCommandHandler` similar as it was done for `nfsVersion` but refactoring it to be more general.
* pr/1602:
CLOUDSTACK-9422: Granular VMware vms creation as full clones on HV
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Export UUID for zone creation event completion.Action events have support for exporting their "first class entities" over the event bus, if it's turned on. This works mostly for BaseAsyncCmds and any synchronous command that operates on already-existing entities. They are populated by the ApiServer and found by ActionEventUtils.
Where it tends to falter is when dealing with synchronous creation commands. This commit makes createZone export the zone UUID over the event bus once the zone has been created.
* pr/1661:
Export UUID for zone creation event completion.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[4.9/LTS] Add upgrade path from 4.9.0 to 4.9.1, change version to 4.9.1.0-SNAPSHOTThis adds db upgrade path from 4.9.0 to 4.9.1 and fixes a typo in default user role description (CLOUDSTACK-9449)
/cc @karuturi @jburwell -- this will cause issues when fwd-merged to master, I can do the fwd-merging if you would like to avoid fixing the conflicts yourself
@blueorangutan package
* pr/1646:
Updating pom.xml version numbers for release 4.9.1.0-SNAPSHOT
cloudstack: upgrade path from 4.9.0 to 4.9.1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Increases allowed max and permgen memory flags to maven-surefire plugins.
This fixes unit test failures in cloud-server.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit fd7273b446)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Increases allowed max and permgen memory flags to maven-surefire plugins.
This fixes unit test failures in cloud-server.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Simplifies change password transactional logic without using pessmistic locks
- Adds a re-enter password field in the UI to valid ipmi/oobm password
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9180: Optimize concurrent VM deployment operation on same network
Check if VR needs to be allocated for a given network and only acquire lock if required
Refer to the bug for details.
* pr/1251:
CLOUDSTACK-9180: Optimize concurrent VM deployment operation on same network Check if VR needs to be allocated for a given network and only acquire lock if required
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9238: Fix URL length to 2048 for all url fields in VOI will update the PR to add max field length in the API commands too
* pr/1567:
API: update url field max length
not needed on host table
Fix URL length to 2048 for all url fields in VO
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.7:
CLOUDSTACK-9376: Restrict listTemplates API with filter=all for root admin
CLOUDSTACK-9369: Restrict default login to ldap/native users
Add lsb-release dependency to mgmt server and agent on Debian/Ubuntu.
Emit template UUID and class type over event bus when deleting templates.
Emit template UUID and class type over event bus when deleting templatesNew version of #1378 for the 4.7b branch instead of 4.6.
* pr/1564:
Emit template UUID and class type over event bus when deleting templates.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Restricts default login auth handler to ldap and native-cloudstack users
- Refactors and create re-usable method to find domain by id/path
- Adds unit test for refactored method in DomainManagerImpl
- Adds smoke test for login handler
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The behavior is now consistent with template creation. This commit
also adds a unit test for this functionality to make sure that it will
always happen.
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Refactor system VM default network creationTwo small commits which moves the retrieval of the default network for the console proxy and the SSVM into a separate protected method. It's a small change that makes the code more readable/maintainable and also makes the class more suitable for overriding should one want to do this. It's forward-ported from our 4.2 branch.
No new tests since this should not change any functionality, and thus should be covered by the existing unit tests.
Now on the master branch (#1359 was on the wrong branch).
* pr/1360:
Refactor ssvm default network retrieval.
Refactor console proxy default network retrieval.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Dynamically load drivers before creating our DB connectionsSolution to the mailing thread titled "MySQL : No suitable driver found for jdbc:mysql".
It doesn't harm that we explicitely load the MySQL driver, and for those which would use a commons-dbcp version < 1.4 this would fix it as well. Since JDBC 4.0, the JDBC driver can auto-register itself, but for some weird cases (like ours), it's not working. Therefore we need to explicitly load the JDBC driver.
* pr/1553:
Dynamic loading of DB driver + support for other DB providers
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9203 Implement security group move on updateVM API call cherry-picked from a exoscale internal fix
Conflicts:
api/src/org/apache/cloudstack/api/command/user/vm/UpdateVMCmd.java
server/src/com/cloud/vm/UserVmManager.java
server/src/com/cloud/vm/UserVmManagerImpl.java
* pr/1297:
CLOUDSTACK-9203 refactorred DeployVM code to be used by UpdateVM as well
CLOUDSTACK-9203 security group update on running instance
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9380: fix NPE in listDomains API for a mistakeThe issue happens if volumeTotal is NULL in database.
This is caused by commit 0407fb334f for CLOUDSTACK-7847.
* pr/1550:
CLOUDSTACK-9380: fix NPE in listDomains API for a mistake
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9358: StringIndexOutOfBoundsException on eventsFixes JSON deserialization of `cmdInfo` (current process fails with `StringIndexOutOfBoundsException` when `cmdEventType` is the last parameter in the JSON string).
A `StringIndexOutOfBoundsException` is thrown in some cases during event publication.
Example: a stopVirtualMachine API request is executed, and fails with:
```
2016-04-15 09:24:43,080 ERROR [o.a.c.f.m.MessageDispatcher] (catalina-exec-1:ctx-840cbaa7 ctx-8daf0e9c ctx-f63af073) Unexpected exception when calling com.cloud.api.ApiServer.handleAsyncJobPublishEvent
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor307.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.apache.cloudstack.framework.messagebus.MessageDispatcher.dispatch(MessageDispatcher.java:75)
at org.apache.cloudstack.framework.messagebus.MessageDispatcher.onPublishMessage(MessageDispatcher.java:45)
at org.apache.cloudstack.framework.messagebus.MessageBusBase$SubscriptionNode.notifySubscribers(MessageBusBase.java:441)
at org.apache.cloudstack.framework.messagebus.MessageBusBase.publish(MessageBusBase.java:178)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.publishOnEventBus(AsyncJobManagerImpl.java:1052)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.submitAsyncJob(AsyncJobManagerImpl.java:180)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.submitAsyncJob(AsyncJobManagerImpl.java:168)
at com.cloud.api.ApiServer.queueCommand(ApiServer.java:687)
at com.cloud.api.ApiServer.handleRequest(ApiServer.java:528)
at com.cloud.api.ApiServlet.processRequestInContext(ApiServlet.java:296)
at com.cloud.api.ApiServlet$1.run(ApiServlet.java:127)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext$1.call(DefaultManagedContext.java:56)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext.callWithContext(DefaultManagedContext.java:103)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext.runWithContext(DefaultManagedContext.java:53)
at com.cloud.api.ApiServlet.processRequest(ApiServlet.java:124)
at com.cloud.api.ApiServlet.doGet(ApiServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:620)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:52)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:950)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1040)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1720)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.run(NioEndpoint.java:1679)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -468
at java.lang.String.substring(String.java:1967)
at com.cloud.api.ApiServer.handleAsyncJobPublishEvent(ApiServer.java:270)
at sun.reflect.GeneratedMethodAccessor307.invoke(Unknown Source)
... 41 more
```
The VM is not stopped, and the API returns the following error:
HTTP/1.1 530 : InvocationTargetException when invoking event handler for subject: job.eventpublish
The error comes from JSON parsing in 339355594c/server/src/com/cloud/api/ApiServer.java (L270)
The `substring()` method throws a StringIndexOutOfBoundsException when `cmdEventType` is the last field in the JSON object.
The JSON object being the JSON serialization of a `HashMap` object, the order of the fields is not guaranteed. In my tests, I observed that there is no error with Java 7, but it fails with Java 8, which has a different Hashmap implementation.
For example, with request http://127.0.0.1:8096/client/api?command=stopVirtualMachine&id=734ef752-fe99-4d46-8f31-18130496473c, cmdInfo is:
```
{"ctxUserId":"1","httpmethod":"GET","ctxStartEventId":"105","id":"734ef752-fe99-4d46-8f31-18130496473c","ctxDetails":"{\"interface com.cloud.vm.VirtualMachine\":\"734ef752-fe99-4d46-8f31-18130496473c\"}","ctxAccountId":"1","uuid":"734ef752-fe99-4d46-8f31-18130496473c","cmdEventType":"VM.STOP"}
```
and it fails.
Please note that the error is not present for all API requests, depending on the parameters fields.
* pr/1503:
CLOUDSTACK-9358: StringIndexOutOfBoundsException on events
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices existexternal network device usage monitor thread that runs every 5mins by default (based on global config external.network.stats.interval) and runs coalesce query to acquire a lock. When there are no external devices exist, there is no need to run usage collection.
Added test case to verify that usage collection task is not run when there are no External LB or External FW
* pr/846:
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices exist
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6928: fix issue disk I/O throttling not appliedDisk IO throttling (for KVM) is not applied in the merge of 4.2.
Tests passed:
(1) start vm
(2) attach volume
(3) start vm with volume
(4) migrate vm (with volume)
* pr/1410:
CLOUDSTACK-6928: fix issue disk I/O throttling not applied
Signed-off-by: Will Stevens <williamstevens@gmail.com>
cherry-picked from a exoscale internal fix:
Implement security group move on updateVM API call
Prevent security group update while instance is running
Conflicts:
api/src/org/apache/cloudstack/api/command/user/vm/UpdateVMCmd.java
server/src/com/cloud/vm/UserVmManager.java
server/src/com/cloud/vm/UserVmManagerImpl.java
CLOUDSTACK-9365 : updateVirtualMachine with userdata should not error when a VM is attached to multiple networks from which one or more doesn't support userdata
* pr/1523:
Marvin script for cloudstack-9365
CLOUDSTACK-9365 : updateVirtualMachine with userdata should not error when a VM is attached to multiple networks from which one or more doesn't support userdata
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignoredDisable and Remove Host operation disables the primary storage capacity.
Steps to replicate:
Base Condition: There exists a host and storage pool with same id
Steps:
1. Find a host and storage pool having same id
2. Disable the host
3. CPU(1) and MEMORY(0) capacity in op_host_capacity for above host is disabled
4. STORAGE(3) capacity in op_host_capacity for storage pool with id same as above host is also disabled
RCA:
'host_id' column in 'op_host_capacity' table used for storing both storage pool id (for STORAGE capacity) and host id (MEMORY and CPU). While disabling a HOST we also disable the capacity associated with host.
Ideally while disabling capacity we should only disable MEMORY and CPU capacity, but we are not doing so.
Code Path:
ResourceManagerImpl.doDeleteHost() -> ResourceManagerImpl.resourceStateTransitTo() -> CapacityDaoImpl.updateCapacityState(null, null, null, host.getId(), capacityState.toString())
updateCapacityState is updating disabling all entries which matches the host_id. This will also disable a entry having storage pool id same as that of host id.
Changes:
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Test Result:
```
Before Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
9 rows in set (0.00 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Disabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
After Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.01 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.00 sec)
Sudhansus-MAC:cloudstack sudhansu$ nosetests-2.7 --with-marvin --marvin-config=setup/dev/advanced.cfg test/integration/component/maint/test_capacity_host_delete.py
==== Marvin Init Started ====
=== Marvin Parse Config Successful ===
=== Marvin Setting TestData Successful===
==== Log Folder Path: /tmp//MarvinLogs//Apr_22_2016_22_42_27_X4VBWD. All logs will be available here ====
=== Marvin Init Logging Successful===
==== Marvin Init Successful ====
===final results are now copied to: /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB===
Sudhansus-MAC:cloudstack sudhansu$ cat /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB/results.txt
test_01_op_host_capacity_disable_host (integration.component.maint.test_capacity_host_delete.TestHosts) ... === TestName: test_01_op_host_capacity_disable_host | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 0.168s
OK
```
* pr/1516:
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Added conditions to ensure the capacity_type is added only when capacity_type length is greater than 0.
Added checks in marvin test to ensure the capacity exists for a host before disabling it.
Added checks to avoid index out of range exception
* 4.7:
Fix Sync of template.properties in Swift
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
Fix Sync of template.properties in SwiftWhen using Swift as a secondary storage, we create a template.properties file which stores the metadata about the template. Currently the data which is present in the file is incorrect which leads to templates becoming unavailable after they are downloaded. This fix makes sure that the template.properties has the correct "path" set so that templates are available.
I've also done a bit of cleanup and made the code bit more clean.
* pr/1331:
Fix Sync of template.properties in Swift
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It defaults to 1, which is hardcoded in the template:
./cosmic/cosmic-core/systemvm/patches/debian/config/opt/cloud/templates/keepalived.conf.templ
As non-VPC redundant routers use this setting, I think it makes sense to use it for rVPCs as well.
We also need a change to pickup the cmd_line parameter and use it in the Python code that configures the router.
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
This PR addresses the following JIRA ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-8813
The problem is that there needs to be notifications sent when a host is added to, about to be removed from, and removed from a cluster.
Such notifications can be used for many purposes. For example, it can allow storage plug-ins to update ACLs on their storage systems. Also, it can allow us to clean up IQNs from ESXi hosts that are no longer needed.
* pr/816:
CLOUDSTACK-8813: Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9299: Out-of-band Management for CloudStackSupport access to a hosts out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature, please install `ipmitool` (using yum/apt/brew) and `ipmisim`:
https://pypi.python.org/pypi/ipmisim
The default ipmitool location is assumed in /usr/bin, if this is different in your env please fix the global setting, see FS for details on various global settings.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
/cc @jburwell @swill @abhinandanprateek @murali-reddy @borisstoyanov
* pr/1502:
maven: ignore utils/testsmallfileinactive for rat checking
CLOUDSTACK-9378: Fix for #1497
HypervisorUtilsTest: increate timeout to 8seconds
travis: Use patched version of ipmitool for tests
CLOUDSTACK-9299: Out-of-band Management for CloudStack
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
* 4.7:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
Handle private gateways more reliablyWhen initialising a VPC router we need to know which IP/device corresponds to a private gateway. This is to solve a problem when stop/starting a VPC router (which gets the private gateway config as a guest network and as a result breaks the functionality). You read it right, the private gateway is sent as type=guest after reboot and type=public initially.
Before this change, you could add a private gw to a running router but you couldn't restart it (it would mix up the tiers). Now the private gateway is detected properly and it works just fine.
Booting without private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.0.42",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "None",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
Booting with private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.2.227",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "10.201.10.1",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
And:
```
cat cmdline
vpccidr=10.0.0.0/24 domain=cs2cloud dns1=8.8.8.8 privategateway=10.201.10.1 template=domP name=r-167-VM eth0ip=169.254.2.227 eth0mask=255.255.0.0 type=vpcrouter disable_rp_filter=true baremetalnotificationsecuritykey=OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w baremetalnotificationapikey=V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw host=192.168.22.61 port=8080
```
Logs:
```
2016-02-24 20:08:45,723 DEBUG [c.c.n.r.VpcVirtualNetworkApplianceManagerImpl] (Work-Job-Executor-4:ctx-458d4c52 job-1402/job-1403 ctx-d5355fca) (logid:5772906c) Set privategateway field in cmd_line.json to 10.201.10.1
```
* pr/1474:
Handle private gateways more reliably
Add private gateway IP to router initialization config
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9287 - Fix unique mac address per rVPC routerThis is work by @wilderrodrigues, see PR #1413 It contains important fixes and I think it needs to be included so I send the PR again.
* pr/1483:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Support access to a host’s out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature `ipmisim` can be used:
https://pypi.python.org/pypi/ipmisim
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This would fix regression from recent mvn version changes. Without this
patch users get redirected to error.jsp as jstl-1.2 jar is not installed
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Removes commands.properties file
- Fixes apidocs and marvin to be independent of commands.properties usage
- Removes bundling of commands.properties in deb/rpm packaging
- Removes file references across codebase
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Validate API arguments based on annotations. Introduces:
- NotNullOrEmpty: for doing null and empty string checks
- PositiveNumber: number > 0 (natural number)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8901: PrepareTemplate job thread hard-coded to max 8 threads The thread pool was hardcoded to use 8 threads,
com.cloud.template.TemplateManagerImpl.configure(String, Map<String, Object>):
_preloadExecutor = Executors.newFixedThreadPool(8, new NamedThreadFactory("Template-Preloader"));
Added the change to pick threadpool size from configuration.
* pr/880:
CLOUDSTACK-8901: PrepareTemplate job thread hard-coded to max 8 threads
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9351: Add ids parameter to resource listing API calls## General behaviour
A new parameter is added in each method, its type a list of IDs of the entity, it will be mutually exclusive with id. (Similar to <code>id</code> and <code>ids</code> parameters in <code>listVirtualMachines</code> method)
### API Methods affected
* <code>listTemplates</code>: new parameter **<code>ids</code>**, mutually exclusive with <code>id</code>
* <code>listVolumes</code>: new parameter **<code>ids</code>**, mutually exclusive with <code>id</code>
* <code>listSnapshots</code>: new parameter **<code>ids</code>**, mutually exclusive with <code>id</code>
* <code>listVMSnapshots</code>: new parameter **<code>vmsnapshotids</code>**, mutually exclusive with <code>vmsnapshotid</code>
* pr/1497:
CLOUDSTACK-9351: Add marvin test and add it to travis file
CLOUDSTACK-9351: Add ids parameter to resource listing API calls
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage- KVM-HA- Fix CheckOnHost for Local storage
- Also skip HA on VMs that are using local storage
* pr/1496:
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage - Also skip HA on VMs that are using local storage
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Fixes JSON deserialization of cmdInfo (current process fails with
StringIndexOutOfBoundsException when cmdEventType is the last parameter
in the JSON string.
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM idWhen calling listServiceOfferings with VM id as parameter. It is returning incompatible tagged offerings. It should only list all compatible tagged offerings. Compatible means the new service offering should contain all the tags of the existing service offering(Existing offering SUBSET of new offering). If that is the case It should list in the result and can be upgraded to that offering.
* pr/1321:
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM id
Signed-off-by: Will Stevens <williamstevens@gmail.com>
[4.7] vmware: improve support for disks- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
* pr/1365:
vmware: improve support for disks
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9323: Fix cancel host maintenance canFix cancel host maintenance so that if maintenance is cancelled the host come back to normal state gracefully.
Added marvin tests for host maintennace.
* pr/1454:
CLOUDSTACK-9323: Fix Cancel maintenance so that if maintenance is cancelled the host come back to normal state gracefully. Added marvin tests for host maintennace.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
* 4.7:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
CLOUDSTACK-9349: Enable root disk detach for KVM with new Marvin testsThis PR addresses the KVM detach/attach ROOT disks from VMs (CLOUDSTACK-9349). In short, this allows the KVM Hypervisor, and I added the Simulator as a valid hypervisor for ease of development and testing of marvin, to detach a root volume and the reattach a root volume using the deviceid=0 flag to the attachVolume API. I have also written a marvin integration test that verifies this feature works for both KVM and the Simulator.
Below is the marvin results files of the full marvin test_volumes.py. All tests pass, including the new root detach/attach, on our KVM lab running with the patches in this PR.
[test_volumes_KIR4G3.zip](https://github.com/apache/cloudstack/files/223799/test_volumes_KIR4G3.zip)
* pr/1500:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Log asynchronous responses in the api logCurrently API responses for synchronous calls are logged, but asynchronous call responses are not. This pull request makes a minor modification that logs the response including the JobId of all asynchronous requests.
As an example, here is what a stopVirtualMachine request looked like in the logs:
2016-04-27 10:43:11,084 INFO [a.c.c.a.ApiServer] (catalina-exec-3:ctx-37d9f693 ctx-d2368de3) (logid:3a0fad97) (userId=2 accountId=2 sessionId=AF8B1F726ACB5C3A637B8B300AA218A7) 10.103.0.207 -- GET command=stopVirtualMachine&id=f63b6fcc-e0b0-480f-8f7a-cba329634ba1&forced=false&response=json&_=1461771791036 200
After this modification, here is what the logs look like:
2016-04-27 13:37:11,338 INFO [a.c.c.a.ApiServer] (catalina-exec-6:ctx-915b5c84 ctx-a03152fa) (logid:66249df0) (userId=2 accountId=2 sessionId=9EF127EED5CA6E74797DFE487D980FAF) 10.103.0.207 -- GET command=stopVirtualMachine&id=f63b6fcc-e0b0-480f-8f7a-cba329634ba1&forced=false&response=json&_=1461782231194 200 {"stopvirtualmachineresponse":{"jobid":"5b9f4a9b-eabe-4fa4-849d-3d004bb65634"}}
* pr/1522:
Log responses from asynchronous api commands
Signed-off-by: Will Stevens <williamstevens@gmail.com>
4.9 mvn version safeupgradeonlyUpgrades maven dependencies versions that can be safely upgraded without breaking console-proxy/crypto usage.
Bisected changes from: https://github.com/apache/cloudstack/pull/1397
cc @swill @DaanHoogland
* pr/1510:
maven: fix dependency version support by JDK7
further maven dependency updates from Daan
framework/quota: fix checkstyle issue
maven: Upgrade dependency versions
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Fixed: Error given when creating VPN user in one network if VR for another network is stopped.
Problem: Adding a VPN user to an IP on an isolated network fails with an exception if the end-user has two isolated networks and one of them is not in use (i.e. VR is stopped).
Fix: Presently in the code, all the VR which are not in Running state are forced to throw error. Added a check for the Stopped and Stopping state routers. Configurations will be applied to them when they get restarted.
* pr/826:
Fixed Coverity Issue: Unintentional Integer FLow
Fixed: Error given when creating VPN user in one network if VR for another network is stopped
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9322: Support for Internal LB fuctionality with Nuage VSP SDN Plugin including Marvin test coverageTask: https://issues.apache.org/jira/browse/CLOUDSTACK-9322
PR contents:
1) UI changes to support LB provider InternalLbVm during VPC offering creation.
2) Bug fix for CLOUDSTACK-9320.
3) Nuage VSP SDN Plugin related enhancements for VPC network functionality.
4) Marvin test coverage for Internal LB support on master with Nuage VSP SDN Plugin.
5) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
6) PEP8 & PyFlakes compliance with our Marvin test code.
Test run:
CloudStack$ nosetests --with-marvin --marvin-config=nuage_ant.cfg test/integration/plugins/nuagevsp/ -a tags=nuagevsp
Test results:
Test user data and password reset functionality with Nuage VSP SDN plugin ... === TestName: test_nuage_UserDataPasswordReset | Status : SUCCESS ===
ok
Test Nuage VSP VPC Offering with different combinations of LB service providers ... === TestName: test_01_nuage_internallb_vpc_Offering | Status : SUCCESS ===
ok
Test Nuage VSP VPC Network Offering with and without Internal LB service ... === TestName: test_02_nuage_internallb_vpc_network_offering | Status : SUCCESS ===
ok
Test Nuage VSP VPC Networks with and without Internal LB service ... === TestName: test_03_nuage_internallb_vpc_networks | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with different combinations of Internal LB rules ... === TestName: test_04_nuage_internallb_rules | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality by performing (wget) traffic tests within a VPC ... === TestName: test_05_nuage_internallb_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with different LB algorithms by performing (wget) traffic tests ... === TestName: test_06_nuage_internallb_algorithms_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with restarts of VPC network components by performing (wget) ... === TestName: test_07_nuage_internallb_vpc_network_restarts_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with InternalLbVm appliance operations by performing (wget) ... === TestName: test_08_nuage_internallb_appliance_operations_traffic | Status : SUCCESS ===
ok
Test Basic VPC Network Functionality with Nuage VSP SDN plugin ... === TestName: test_nuage_vpc_network | Status : SUCCESS ===
ok
Test Nuage VSP SDN plugin with basic Isolated Network functionality ... === TestName: test_nuage_vsp | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 11 tests in 12094.705s
OK
Test run logs:
[results.txt](https://github.com/apache/cloudstack/files/187587/results.txt)
[runinfo.txt](https://github.com/apache/cloudstack/files/187588/runinfo.txt)
Test config file:
[nuage_ant.txt](https://github.com/apache/cloudstack/files/222711/nuage_ant.txt)
Note: Attached the Marvin config file as .txt instead of .cfg.
PEP8 & PyFlakes Compliance:
CloudStack$ pep8 --max-line-length=150 test/integration/plugins/nuagevsp/*.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/nuageTestCase.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_password_reset.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vpc_internal_lb.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vpc_network.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vsp.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/*.py
#CLOUDSTACK-9322
* pr/1452:
CLOUDSTACK-9322 : Marvin tests for Internal Lb with Nuage VSP
CLOUDSTACK-9320 : InternalLBVM is not getting destroyed when the last Internal Load Balancer rule is removed for the corresponding source IP address
CLOUDSTACK-9322 : Changes to support InternalLbVm with Nuage VSP plugin
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
- Refactor and move VirtualMachineDiskInfo to cloud-utils
- Allows mixing of scsi controller types
- Fixes a NPE case with map passed as null, for example in case of detach volume
command
- Use a osdefault translator that allow use of recent os types added (enums of
which) are not available in the sdk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removed unused code from com.cloud.api.ApiServer**Removed \_ from variables names**: private variables with \_ at the beginning is common in C++ but not in Java.
**Removed unused code from ApiServer:**
- com.cloud.api.ApiServer.getPluggableServices(): unused method;
- com.cloud.api.ApiServer.getApiAccessCheckers(): unused method;
**Methods and variables access level reviewed:**
- com.cloud.api.ApiServer.handleAsyncJobPublishEvent(String, String ,Object): this method was private but the annotation @MessageHandler requests public methods, as can be seen in org.apache.cloudstack.framework.messagebus.MessageDispatcher.buildHandlerMethodCache(Class\<?\>), which searches methods with the @MessageHandler annotation and changes
it to be accessible (setAccessible(true)). Thus, there is no reason for handleAsyncJobPublishEvent be a private method and lead some other dev to wrong conclusions about the use of the method;
- Global variables and methods called just by this class (ApiServer) were changed to private.
**Changed variables and methods from static to non-static (if possible):** as some variables/methods are used just by one object of this class, instantiated by Spring, they were changed to non-static.
With that, calls from com.cloud.api.ApiServlet.ApiServlet() that used static methods from ApiServer, were changed from ApiServer.\<staticMethodName\> to \_apiServer.\<methodName\> that refers to the org.apache.cloudstack.api.ApiServerService interface. Thus, methods com.cloud.api.ApiServer.getJSONContentType() and com.cloud.api.ApiServer.isSecureSessionCookieEnabled() had to be added in the interface (org.apache.cloudstack.api.ApiServerService, interface implemented by class ApiServer).
* pr/1263:
The goal of this PR is to review com.cloud.api.ApiServer class, with the following actions:
Signed-off-by: Will Stevens <williamstevens@gmail.com>
following actions:
Removed “_” in beginning of global variables names:
Variables was changed from “_<variablename>” to “<variablename>”, as
this convension (private veriables with “_”) is common in C++ but not in
Java.
Removed unused code from ApiServer:
- com.cloud.api.ApiServer.getPluggableServices():
Unused method.
- com.cloud.api.ApiServer.getApiAccessCheckers():
Unused method.
Methods and variables access level reviewed:
- com.cloud.api.ApiServer.handleAsyncJobPublishEvent(String, String,
Object):
This method was private but the annotation @MessageHandler requests
public methods, as can be seen in
org.apache.cloudstack.framework.messagebus.MessageDispatcher.buildHandlerMethodCache(Class<?>),
which searches methods with the @MessageHandler annotation and changes
it to accessible (“setAccessible(true)”). Thus, there is no reason for
handleAsyncJobPublishEvent be a private method.
- Global variables and methods called just by this class (ApiServer)
were changed to private.
Changed variables and methods from static to non static (if possible):
As some variables/methods are used just by one object of this class
(instantiated by springer), they were changed to non static.
With that, calls from com.cloud.api.ApiServlet.ApiServlet() that used
static methods from ApiServer, was changed from
ApiServer.<staticMethodName> to _apiServer.<methodName> that refers to
the org.apache.cloudstack.api.ApiServerService interface. Thus, methods
com.cloud.api.ApiServer.getJSONContentType() and
com.cloud.api.ApiServer.isSecureSessionCookieEnabled() had to be
included in the interface (org.apache.cloudstack.api.ApiServerService,
interface implemented by class ApiServer).
However, com.cloud.api.ApiServer.isEncodeApiResponse() was keept static,
as its call hierarchy would have to be changed (more than planed for
this PR).
SecurityGroupRulesCmd code cleanupWrote a test and cleaned some duplicate code with the objective to evaluate the jenkins pull request process at builds.a.o
worthwhile to keep, IMHO.
* pr/1287:
SecurityGroupRulesCmd code cleanup review comments handled
deal with PMD warnings
code cleanup
security rules test
remove autogenerated pydev files
Signed-off-by: Koushik Das <koushik@apache.org>
- In case of redundant VPCs, the ACL items are revoked in the first iteration. Since the econd iteration
is needed in order to remove the private network, we have to check if the nic profile is gone before trying
to revoke the ACL items again, which would throw a NPE.
- Some variable extraction in order to ease debugging.
CLOUDSTACK-9333: Exclude clusters from OVF operationsJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9333
## Introduction
In some environments there is a need to exclude certain VMware clusters from performing OVF operations. This operations are part of:
* create template
* create volume snaphsot
* copy template, volume, images from primary storage to secondary storage
* migrate volume
* participate when a template gets cached over to primary storage.
In ESX/ESXi, OVF operations are low priority and bound to a single CPU and most likely get throttled to certain IOPS and network limits.
If the hypervisor chosen for OVF operations is weak or overloaded this results in significantly longer execution of such OVF command and therefore degraded performance of underlying CloudStack API call.
### Proposed solution
It is proposed to add a way to exclude hosts from selected clusters for OVF operations.
To exclude a cluster, would be necessary to insert a record in <code>cluster_details</code> specifying property **vmware.exclude_from_ovf** in this way: (supposing we want to exclude cluster X)
| cluster_id | name| value |
|:-------------:|:-------------:|:-------------:|
|X|vmware.exclude_from_ovf|true|
* pr/1457:
CLOUDSTACK-9333: Exclude clusters for OVF operations
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Add ability to download templates in SwiftThis PR adds the ability to download templates when using Swift as a secondary storage. Uses the "temp_url" feature of Swift so that tempates can be downloaded without authenticaiton.
* pr/1332:
Add ability to download templates in Swift
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9298: Improve performance of resource retrieval that have tags associated and target volumes, VMs and templatesJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9298
## Description of the problem
When retrieving a large number of resources which have tags associated with, retrieval methods took too long. Our goal is to improve performance of this methods avoiding query the database for each tag, managing that information in memory.
API methods to improve: <code>listTemplates</code>, <code>listVolumes</code>, <code>listVirtualMachines</code>
To achive it, it's necessary to include new columns in <code>template_view</code>, <code>volume_view</code> and <code>user_vm_view</code>:
* tag_account_name
* tag_domain_name
* tag_domain_uuid
* pr/1425:
CLOUDSTACK-9298: Remove user definer from view creations
CLOUDSTACK-9298: Add @MappedSuperClass support for persistence inheritance
CLOUDSTACK-9298: Improve ListTemplatesCmd, ListVolumesCmd and ListVMsCmd performance
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It is now broken into separate methods for more readability and
flexibility. Each zone type (basic, advanced) has its own method for
getting the default network when creating the VM.
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMfor xenserver,kvm and for vmware.
* pr/780:
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Kishan Kavala <kishan@apache.org>
Removed unused variables from "NetworkStateListener" classWe removed the following variables from "com.cloud.network.NetworkStateListener"
. UsageEventDao _usageEventDao
. NetworkDao _networkDao
We changed the EventBus s_eventBus variable to private, the constructor not to use those variables and applied this change in classes com.cloud.network.IpAddressManagerImpl and org.apache.cloudstack.engine.orchestration.NetworkOrchestrator
* pr/1261:
Removed unused variables from class NetworkStateListener
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removal of class AgentBasedStandaloneConsoleProxyManagerThe AgentBasedStandaloneConsoleProxyManager class is neither manually
instatiated anywhere in the code nor via Spring. Further checking in the
interface which the class implements, shows that the use for classes
implementing the EventBus interface relies on instances generated by the
Spring framework, which discards the possibility of the class being
created by EJB. Being the class useless, it was discarded.
* pr/855:
Add Javadoc to AgentBasedStandaloneConsoleProxyManager
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8858: listVolumes API fails for a particular domain with NPE.CLOUDSTACK-8858: listVolumes API fails for a particular domain with NPE.
Summary: listVolumes API fails when volume associated vm instance has NULL or invalid state. Fix the code to guard this situation since this should not block volume listing.
* pr/830:
CLOUDSTACK-8858: listVolumes API fails for a particular domain with NPE.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.7:
CLOUDSTACK-9254: Make longer names display pretty
CLOUDSTACK-9245 - Deletes ACL items when destroying the VPC or deleting the ACL itself
CLOUDSTACK-9245 - Formatting NetworkACLServiceImpl class
CLOUDSTACK-9245 - Formatting VpcManagerImpl class
CLOUDSTACK-9245 - Formatting NetworkACLManagerImpl class
More VR performance!
* 4.7:
CLOUDSTACK-9237: Create LB Healthcheck issues - button alignment and error message goes outside the window
CLOUDSTACK-9235: Autoscale button is missing in VPC
CLOUDSTACK-9229: Autoscale policy creation failing in VPC due to zoneid missing in createAutoScaleVmProfile
CLOUDSTACK-8860: improve error messages in VM deployment code path.improved the error messages in vm deployment code path. added some more data to the error messages and also fixed some errors using internal ids to use uuids.
* pr/864:
CLOUDSTACK-8860: improve error messages in VM deployment code path.
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9132: API createVolume takes empty string for name parameterSteps to Reproduce:
================
Create a volume using createVolume API where parameter name is empty.
It creates a volume with empty name.
But the name parameter is mandatory.(Issue)
Expected Behaviour:
================
It shouldn't create a volume with an empty name. Error should be returned.
Solution:
=======
Added a condition to check in case of empty string. If the name is an empty string, it generates a random name for the volume. Made the name field optional in UI as well as in API.
* pr/1319:
CLOUDSTACK-9132: API createVolume takes empty string for name parameter
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9222 Prevent cloud.log.1 filling up the disk
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
NicProfileHelperImpl NullpointerException when ipVO is nullWhen a VPC has a private gateway, and one would like to restart the VPC with **cleanup** it would fail.
This PR adds a NullPointer check and verifies it with an integration test.
```
test_01_vpc_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_01_vpc_privategw_acl | Status : SUCCESS ===
ok
test_02_vpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_02_vpc_privategw_static_routes | Status : SUCCESS ===
ok
test_03_vpc_privategw_restart_vpc_cleanup (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS ===
ok
test_04_rvpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_04_rvpc_privategw_static_routes | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 4 tests in 2945.055s
OK
```
* pr/1328:
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin user
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failing
CLOUDSTACK-6485 prevent ip asignment of private gw iface
CLOUDSTACK-9204 Do not error when staticroute is already gone
make both check lines consistent
CLOUDSTACK-9181 Prevent syntax error in checkrouter.sh
CLOUDSTACK-9202 Bump ssh timeout
[4.7] FIX Site2SiteVPN on redundant VPCThis PR:
- fixes the inability to setup more than one Site2Site VPN connection from a VPC
- fixes starting of Site2Site VPN on redundant VPC
- fixes Site2Site VPN state checking on redundant VPC
- improves the vpc_vpn test to allow multple hypervisors
- adds an integration test for Site2Site VPN on redundant VPC
Tested it on 4.7 single Xen server zone:
command:
```
nosetests --with-marvin --marvin-config=/data/shared/marvin/mct-zone1-xen1.cfg -a tags=advanced,required_hardware=true /tmp/test_vpc_vpn.py
```
results:
```
Test Site 2 Site VPN Across redundant VPCs ... === TestName: test_01_redundant_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_01_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test Site 2 Site VPN Across VPCs ... === TestName: test_01_vpc_site2site_vpn | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 3 tests in 1490.076s
OK
```
also performed numerous manual inspections of state of VPN connections and connectivity between VPC's
* pr/1276:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-6485 prevent ip asignment of private gw ifacePrevent ipaddress asignment of gateway to gateway-interface on vpc router by setting vpcid to null in network. This was fixed in 4.4 by 1f209ff226, reimplemented for 4.7
* pr/1299:
CLOUDSTACK-6485 prevent ip asignment of private gw iface
Signed-off-by: Remi Bergsma <github@remi.nl>
Added conditions to check if the name is empty or blank.
If it is empty or blank, then it generates a random name.
Made the name field as optional in UI as well as in API.
Added required unit tests.
Prevent ipaddress asignment of gateway to gateway-interface on vpc router by setting vpcid to null in network
Was fixed in 4.4 by 1f209ff226
Reimplemented for 4.7
Rohit Yadav
Marc-Aurèle Brothier
Rajani Karuturi
subhash_y
Mike Tutkowski
nnesic
nvazquez
Nathan Johnson
Wido den Hollander
nvazquez
Will Stevens
Bharat Kumar
John Burwell
jeff
Nick Livens
Daan Hoogland
Loic Lambiel
Kishan Kavala
Sudhansu
Wei Zhou
Priyank Parihar
Syed
Remi Bergsma
Paul Angus
weingartner
Olivier Lemasle
Maneesha.P
Abhinandan Prateek
Abhinandan Prateek
Kshitij Kansal
SudharmaJain
David Mabry
gabrascher
Koushik Das
Wilder Rodrigues
Miguel Ferreira
Nitin Kumar Maharana
Michael Andersen
Boris Schrijver
Nitin Kumar Maharana
pedro-martins
