The following are summary of changes:
1) when network.disable.rpfilter is set to true, then rp_filter will be disadbled(set to 0) on all the public interfaces and also default setting of the system.
2) when network.disable.rpfilter is set to false, then rp_filter will be enabled(set to 1) on all the public interfaces and also default setting of the system.
3) here public public interface means , eth2 ... ethN. default setting means (/proc/sys/net/ipv4/conf/default/rp_filter).
4) Default setting change will have impact on non-public interface. Due to these, rp_filter is always enabled on Non-public interfaces(eth0,eth1 and lo).
5) when a new public interface is created, new interface will take rp_filter value from the default setting.
The following are summary of changes:
1) when network.disable.rpfilter is set to true, then rp_filter will be disadbled(set to 0) on all the public interfaces and also default setting of the system.
2) when network.disable.rpfilter is set to false, then rp_filter will be enabled(set to 1) on all the public interfaces and also default setting of the system.
2) here public public interface means , eth2 ... ethN. default setting means (/proc/sys/net/ipv4/conf/default/rp_filter).
3) Default setting change will have impact on non-public interface.if there is no specific setting for other interfaces in /etc/sysctl.conf or otherexplict setting , they will follow this default settings. currently non-public interface like eth0 ,eth1 does not have any specific setting in sysctl.conf, due to this there rp_filters will be changed when ever network.disable.rpfilter setting is changed.
4) default setting is required to changes beacuse when a new public interface is created, new interface will take rp_filter value from the default setting.
Added global config to enable/disable rp_filter for domR.
previous commit: d966906374d4a0cb8fa57326a1f7625c871f64fd
Test Case-1 :
1) Set network.disable.rpfilter global config to true
2) Restart the domR
3) check the settings reflected in proc filesystem
- for public interface like eth2,eth3 : /proc/sys/net/ipv4/conf/eth2/rp_filter should have 0 , and rest other interfaces should have value of 1
Test Case-2 :
1) set network.disable.rpfilter global config to false
2) Restart the domR
3) check the settings reflected in proc filesystem
- for public interface like eth2,eth3 : /proc/sys/net/ipv4/conf/eth2/rp_filter should have 1 , and rest other interfaces should also have value of 1
The reason is:
1. In redundant router, we won't enable eth2(public network interface) until
keepalived determine the router is MASTER.
2. ipassoc.sh normally kick in before keepalived process running. And it would
set eth2's IP address using "ip addr add $dev $ip"
3. "ip addr add $dev $ip" won't add mask for the device, then there is no way to
update broadcast address for eth2. Then broadcast address is 0.0.0.0.
4. As long as "ip addr add $dev $ip" executed, later executed "ifconfig $dev $ip
netmask $mask" won't calculated the broadcast address from $ip and $mask.
To fix this, we enable and configure eth2 temporaily when cloud-early-config
executed, then disable eth2 interface. By this way, broadcast address of should
be calculated and set correctly.
status 11083: resolved fixed
The issue happened quite rare, but indeed can show.
And when the issue happen, the status of redundant router would be "Status:
FAULT".
It's due to ipassoc.sh wasn't executed before the system bring eth2 up and go to
master mode, then eth2 wasn't configured correctly. Then "ip route add default
xx" can't complete.
This commit should fixes the issue.
commit e4fe14a9ce19fbbdb15bbfaad586d80031ca9fbc break redundant router, because
at time of ping, the network is not up for redundant router.
Add timout for ping
Part 1
This backport contained:
commit 52317c718c25111c2535657139b541db0c9d1e1f
bug 9154: Initial check in for enabling redundant virtual router
commit 54199112055d754371bfb141168fb5538bf6d6ea
Add host verification for CheckRouterCommand
commit cef978a228c90056ead9be10cbc4de74c2b8de76
Fix CheckRouterAnswer's isMaster report
commit 4072f0a6991ac3b63601a1764fbe14188965f62f
Some build fixes and code refactoring for redundant router
commit 4d3350b7cd8ee2706a9bace4437fc194e36c8dd5
Redundant Router: Fix OVS
commit 6a228830e7c46d819fa0c3317e159e041337e887
Fix findByNetwork()/findByNetworkAndPod()'s return
commit c627777b3d5bdbcd60db4032cebd349a5b1ecd83
Redundant Router: Fix isVmAlive()
commit e1275d2514adc41f8744f5107d4069c38be195f1
Only issue CheckRouterCommand to redundant routers
And all modification to the scripts till
commit 4e3942462ed3fde3a3d7011e95839e2128fba514
logging changes
in the master branch.
Naredula Janardhana Reddy
Kelven Yang
frank
Sheng Yang
Abhinandan Prateek
Chiradeep Vittal
anthony
Edison Su
Murali Reddy
alena