Send success answer of type CopyCmdAnswer with full snapshot backup path in secondary store (image store role)
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
- Move vnetBridge clean up function from LibvirtComputingResource to BridgeVifDriver
-- since only BridgeVifDriver have to handle this event
- LibvirtComputingResource now properly call VifDriver.unplug() when it receives UnPlugCommand
- Remove not working and no longer used method getVnet(String) from VirtualMachineName
- Remove not working and no longer used method getVnet() from StopCommand
- Remove unused constructer StopCommand(VirtualMachine, String, boolean) from StopCommand
- Remove unused member vnet from StopCommand
- Remove unused member _modifyVlanPath from OvsVifDriver
Tested with 2 KVM hosts and confirmed it correctly manipulate vnetBridge with start, stop, migrate, plug, and unplug event
Signed-off-by: Hugo Trippaers <htrippaers@schubergphilis.com>
Fix the name of the interface id in extra config, so the nic is found up using the nic uuid instead of the vm id.
getVlanInfo should return null when the nic is plugged on a Lswitch network.
On a distributed portgroup all vms should be connected to a single
portgroup and set a specific vlan on the port. On a standard switch each nic should have its own portgroup with a dedicated vlan (not related to CS vlans)
For legacy zones insist on the old model of asking for credentials for each cluster being added.
For non-legacy zones check if username & password are provided. If either or both not provided, try to retrieve & use the credentials from database, which are provided earlier while adding VMware DC to zone.
This lets user to not specify credentials while adding VMware cluster to zone, if the credentials are same as that of provided while adding VMware DC to zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Description:
a) Fixing NPE when wrong path is provided for primary datastore.
b) No error dialog shows up in GUI when wrong path is provided,
after NPE fix - propagating exception upward.
c) If the KVM agent is down, an invalid datastore gets logged in
storage_pool table and doesn't get removed, so it shows up
in the GUI in the list of datastores - fixing this as well.
listVmwareDcs API is added. Takes 1 parameter (mandatory) which is zoneId.
Returns list of VMware DCs associated with specified zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Following Hotadd memory checks are included now.
1) Check if guest operating system supports memory hotadd
2) Check if virtual machine is using hardware version 7 or later before enabling memory hotadd
Following Hotadd CPU checks are included now.
1) Check if guest operating system supports cpu hotadd
2) Check if virtual machine is using hardware version 8 or later.
3) Check if virtual machine has only 1 core per socket. If hardware version is 7, then only 1 core per socket is supported. Hot adding multi-core vcpus is not allowed if hardware version is 7.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
The problem was because in cloudstack when a vm is stopped it gets destroyed on the host. For a
windows vm the timeoffset (which can be set by changing the timezone from within the vm) is stored
in the platform:timeoffset attribute of vm record. The information is lost when the vm is destroted.
Made change to read and persist the platform:timeoffset vm attribute when an instance is stopped.
The value is persisted in the user_vm_details table. When the vm is started again the attribute is
set for the vm instance that gets created.
Retrieve maximum hotadd memory limit & hotadd memory increment size from running VM's configuration to validate dynamic scale memory limit while scaling up a VM.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Now ESXi server license would be fetched to see if HOTPLUG feature is license or not.
Throw Exception if the feature is not licensed.
Also added FeatureKeyConstants enum type to maintain list of various features to be checked whether licensed or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Check if the associated VMware DC matches the one specified in API params. This check would yield success as the association exists between same entities (zone and VMware DC)
This scenario would result in if the API addVmwareDc is called more than once with same parameters. For such scenario, return success response with VmwareDatacenter object read from database. Also returns success even if the zone has resources (clusters) already.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
on adding sec. storage no need to report back to resourceManager since
the sc. storage is no longer a directly connected host.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
Currently it is very hard to see which tasks are pending in cloudstack
that need to be executed by xapi. Ideally we would like to have a
central overview of all tasks centrally. But for now being able to
enable tracelogging should give some insight in what is going on.
- writeToFile removed since no references to it
- readFileAsString replaced with FileUtils.readFileToString
- minor code duplication removed in dependent method getNicStats
- unit test added
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
instead of a dynamically configured one.
Refactor bits of the HypervisorHostHelper to better
support multiple BroadcastDomainTypes
Cleanup some parts of the code that was using tab indents and removed some dead code.
Read the global configuration setting while configuring VmwareManager.
Also enabling autoExpand feature for supported distributed virtual switch versions.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
The file cloudstack-oss.asf/client/target/cloud-client-ui-4.2.0-SNAPSHOT/WEB-INF/classes/scripts/util/ipmi.py
is not mark as executible, so we cannot execute it directly.
Involve "/usr/bin/python" for it. The position of python file maybe different in
the different machines.
1. Baremetal doesn't have secondary storage, so we don't need check them.
2. The new "AddBaremetalHostCmd" hasn't been used by UI, so keep the validity
checking out for now. "AddHostCmd" would still works.
3. Baremetal haven't implemented multiple ip range feature(CLOUDSTACK-702),
return true for now for single range.
Introduced the SimulatorStorageProcessor to handle image store related
commands. Right now only mock implementations are provided, no error
handling, logging, runtime exception scenarios limited. SystemVMs are
able to start up but the default built-in template has trouble in going
to Ready state.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
CLOUDSTACK-3042 - handle Scaling up of vm memory/CPU based on the presence of XS tools in the template
This also takes care of updation of VM after XS tools are installed in the vm and set memory values accordingly to support dynamic scaling after stop start of VM
Signed-off-by: Abhinandan Prateek <aprateek@apache.org>
for number of commands participating in Vm deployment process, as parallel deployment is supported on the hypervisor side.
The behavior is controlled by global config varirables:
"execute.in.sequence.hypervisor.commands" (false by default) sets/resets the synchronization for commands:
=========================
StartCommand
StopCommand
CreateCommand
CopyVolumeCommand
"execute.in.sequence.network.element.commands" (false by default) sets/resets the synchronization for commands:
==========================
DhcpEntryCommand
SavePasswordCommand
UserDataCommand
VmDataCommand
As a part of the fix, increased the global lock timeout to 30 mins in several VR scripts:
===========================
edithosts.sh
savepassword.sh
userdata.sh
to support situations when multiple concurrent calls to the script are being made.
During Scale up of VM, memory/cpu calculations should consider the memory/cpu overprovisioning factors which are set per cluster.
CLOUDSTACK-2939: CPU limit is not getting set for vm after scaleup to a service offering which have cpu cap enabled
Signed-off-by: Abhinandan Prateek <aprateek@apache.org>
Currently XcpServerDiscoverer.java is only allowing till XenServer 6.1.0. Added
code to support XenServer 6.2.0. Also, added support to allow the RC build
of XenSever 6.2.0.
Signed-off-by: venkataswamybabu budumuru <venkataswamybabu.budumuru@citrix.com>
Signed-off-by: Abhinandan Prateek <aprateek@apache.org>
Made vcenter as required parameter to addVmwareDc API.
Removed stale parameter url from addVmwareDc API.
Improved Exception handling, logging remote exception details.
Provide mock implementations for all network commands in the
MockNetworkManagerImpl of the simualtor
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
Renaming the method in the command objects to be uniform with
PlugNicCommand/UnplugNicCommand.getVmName
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
And the components-simulator.xml configuration. Both are unused as we
use Spring injection now.
Remove unused rebootVM method
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
inactive VM definitions block a new VM starting. Definitions aren't supposed to
be persistent, but sometimes a crash or failed migration can leave behind a
definition.
Signed-off-by: Marcus Sorensen <marcus@betterservers.com> 1370299734 -0600
Whitespace cleanup
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Removing injections which are not required in Vmware Manager
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to application context.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
Unit tests for vmware storage motion. These test the VmwareStorageMotionStrategy.
CLOUDSTACK-659
Fixing migrate volume.
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
Added vm type to prepareNetworkFromNicInfo in MigrateWithStorageCommand implementation.
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Fixing attach volume and delete volume cases for volumes that are moved off original path in datastore when created.
If volume is not found in root directory or datastore, do search in sub folders.
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Sending command MigrateWithStorageCommand to source host instead of target host for the case of migration of VM within cluster.
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Searching for virtual disk during device tear down.
Adding dependency of 'cloud-engine-storage' to vmware hypervisor plugin.
Add hypervisor capability storage_motion_supported for VMware 5.0 and 5.1
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to deal with storage motion tasks.
Added target host parameter to MigrateWithStorageCommand.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to application context.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
Unit tests for vmware storage motion. These test the VmwareStorageMotionStrategy.
CLOUDSTACK-659
Fixing migrate volume.
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
Added vm type to prepareNetworkFromNicInfo in MigrateWithStorageCommand implementation.
Adding dependency of 'cloud-engine-storage' to vmware hypervisor plugin.
Add hypervisor capability storage_motion_supported for VMware 5.0 and 5.1
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to deal with storage motion tasks.
Added target host parameter to MigrateWithStorageCommand.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to application context.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
Unit tests for vmware storage motion. These test the VmwareStorageMotionStrategy.
CLOUDSTACK-659
Fixing migrate volume.
Adding dependency of 'cloud-engine-storage' to vmware hypervisor plugin.
Add hypervisor capability storage_motion_supported for VMware 5.0 and 5.1
Adding dependency of 'cloud-engine-storage' to vmware hypervisor plugin.
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to deal with storage motion tasks.
Added target host parameter to MigrateWithStorageCommand.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware Added
Resource changes to perform VM live migration along with virtual disks across the clusters in a zone.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-659
Support for storage migration in Cloudstack deployment over VMware
Added VmwareStorageMotionStrategy to application context.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for volume live migration across datastores
CLOUDSTACK-659
Fixing migrate volume.
Unit tests for vmware storage motion. These test the VmwareStorageMotionStrategy.
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Sending command MigrateWithStorageCommand to source host instead of target host for the case of migration of VM within cluster.
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Moved 2 methods that are not specific to VMware but Volume are moved to VolumeManager from VmwareManager.
Moved datastore volume path constructing code to separate method.
Added check for source and target host, if they are from different DCs/vCenter instances.
Updated error message & removed stale comment
CLOUDSTACK-2701 - Enable storage migration for VMware resources
Injecting component VolumeManager into VmwareResource.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Introduced 2 new API command classes AddVmwareDcCmd & RemoveVmwareDcCmd.
The new APIs are addVmwareDc & removeVmwareDc, these APIs will associate a Vmware datacenter to a cloudstack zone & dis-associate a Vmware datacenter from a cloudstack zone.
Constraint checks are added for infrastructure change operations in zone that encompass resources like clusters.
Constraint checks are added in discoverer and manager classes.
Added a service 'VmwareDatacenterService' to expose methods that will have API implementation for 2 APIs addVmwareDc & removeVmwareDc
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Support for DB changes for Vmware datacenter objects
Support for DB changes to store mapping with CloudStack zones.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
DevCloud is a XCP Kronos based xen. For this we use the XcpOssResource
whose memory limits were not set explicitly. Instead the base
CitrixResourceBase would set the limits. static_min was set to 128MB
failing the cpvm and ssvm start fails whose offerings have 100MB set to
the max limits.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
RBD format 2 supports cloning (aka layering) where one base image can serve
as a parent image for multiple child images.
This enables fast deployment of a large amount of virtual machines, but it also
saves spaces on the Ceph cluster and improves performance due to better caching.
Qemu-img doesn't support RBD format 2 (yet), so to enable these functions the
RADOS/RBD Java bindings are required.
This patch also enables deployment of System VMs on RBD storage pools. Since we
no longer require a patchdisk for passing the boot arguments we are able to deploy
these VMs on RBD.
Detail: We do two strange things, #1, when a vm is created, we create the uuid
for the domain by converting the name into a uuid, then subsequently, any time
we look for a domain, we convert its name to a uuid and domainLookupByUUID. This
is an unnecessary obfuscation, so instead we just do a domainLookupByName. As
a bonus, we are now setting the domain's uuid to be the cloudstack uuid. It is
no longer used anywhere, but will be less confusing to admins. This shouldn't
affect upgrades, since we can always lookup existing VMs by name.
Signed-off-by: Marcus Sorensen <marcus@betterservers.com> 1369287049 -0600
Detail: Undefine VM after migration. Lingering domain definitions cause
migrations back to the original host to fail, since domain already exists.
BUG-ID: CLOUDSTACK-2640
Bugfix-for: 4.1.0,4.2.0
Signed-off-by: Marcus Sorensen <marcus@betterservers.com> 1369285950 -0600
When dmc is enabled allow cloudstack to scale the VM between dynamic
ranges. This requires a further commit where there is enough memory
available between dynamic-max and static-max for the VM to scale under
memory pressure. See the TODO in Xenserver56FP1Resource.java
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
23e54bb0 introduced multiple hypervisors support for cpu and memory
overcommit. Here the HypervisorGuru base which determines the min, max
range for the memory for all hypervisors computes the minCpu using the
MemoryOverCommit ratio and minMemory using the CpuOverCommit ratio.
Minor typo/logic issue but massive damage across all HV if enabled ;)
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
When setting memory constraints on Xen guests we should honor:
static-min <= dynamic-min <= dynamic-max <= static-max
Our VmSpec while allows the guests to like between dynamic-min and
dynamic-max the memory set by the resource set the static min to be
equal to the dynamic max. This restricts the hypervisor from ensuring
optimized memory handling of guests.
see: http://wiki.xen.org/wiki/XCP_FAQ_Dynamic_Memory_Control#How_does_XCP_choose_targets_for_guests_in_dynamic_range_mode.3F
Another fix was related the restrict_dmc option. when enabled (true)
this option disallows scaling a vm. The logic was reverse handled
allowing scaling when restrict_dmc was on. This control flow is now
fixed.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
Missing default constructor fails the agent manager reloading the XCP
resource on reboot of management server. This is fixed by using the
default constructor as do other Xen resources and include a new resource
ala XenServers for XCP1.6.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
- Changes merged from planner_reserve branch
- Exposing deploymentplanner as an optional parameter while creating a service offering
- changes to DeploymentPlanningManagerImpl to make sure host reserve-release happens between conflicting planner usages.
Fixed by updating the patch files that has
entries to copy scipts on xenserver. Here we added
Add-To-VCPUs-Params-Live.sh
Added a check on Host params whether host restricts Dynamic memory control(DMC) to able to allow scale up VM.
If DMC is not enabled then static max and min are set to SO.
Signed Off by - Nitin Mehta <nitin.mehta@citrix.com>
Fixed by updating the patch files that has
entries to copy scipts on xenserver. Here we added
Add-To-VCPUs-Params-Live.sh
Added a check on Host params whether host restricts Dynamic memory control(DMC) to able to allow scale up VM.
If DMC is not enabled then static max and min are set to SO.
Signed Off by - Nitin Mehta <nitin.mehta@citrix.com>
This feature enables adding of guest ip ranges (public ips) form different subnets.
In order to provide the dhcp service to a different subnet we create an ipalias on the router. This allows the router to listen to the dhcp request from the guest vms and respond accordingly. Every time a vm is deployed in the new subnet we configure an ip alias on the router. Cloudstack uses dnsmasq to provide dhcp service. We need to configure the dnsmasq to issue ips on the new subnets. Added a new class dnsmasqconfigurator which generates the dnsmasq confg file, this file replaces the old config in the router.
The details of the alias ips are stored in db in the nic_ip_alias table. Every time a new subnet is added one of the ip from the subnet is used to configure the ip alias.
I have pushed the code to https://github.com/bvbharatk/cloud-stack/tree/Cloudstack-702 , also rebased the code with master.
I need to test the code for advanced sg enabled network using kvm.
I have added the unit test
Marvin tests are at https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;h=53e4965
Also accomodated some of the changes suggested by koushik.
corrected the import statements. renamed the IpAlias command to createIpAlias command.
This feature supports only ipv4
Harikrishna Patnala
Bharat Kumar
Amogh Vasekar
Anthony Xu
Wei Zhou
Edison Su
Mike Tutkowski
frank
Sateesh Chodapuneedi
Vijayendra Bhamidipati
Jayapal
Hugo Trippaers
Kishan Kavala
Toshiaki Hatano
Amogh Vasekar
Devdeep Singh
Nitin Mehta
Sheng Yang
Prasanna Santhanam
Sanjay Tripathi
Fang Wang
Laszlo Hornyak
Hiroaki KAWAI
Abhinandan Prateek
Edison Su
Alena Prokharchyk
Jayapal
Min Chen
venkataswamybabu budumuru
Marcus Sorensen
Wido den Hollander
Wido den Hollander
Prachi Damle
Alex Huang
Hari Patanala
Mice Xia