CLOUDSTACK-3317 - DVS does not support management\storage network
Added support for Management and Storage Network traffic over VMware DVS in CloudStack deployments. Also added support for storage VLAN over dvPortGroup.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-3317 - DVS does not support management\storage network
Use non-zero dvport count while updating dvportgroups of system traffic.
Updated configuration compare logic to avoid update dvportgroup operation unless required.
This would help improve speed in vm/network deployment as the update calls would reduce. Also improved logging.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Adding unit tests in class HypervisorHostHelperTest
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Added license header to new file being added to repo/branch.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Assertion is not used in runtime, correct way is throw and handle exception without killing app
Signed-off-by: Daan Hoogland <daan.hoogland@gmail.com>
This closes#362
VmwareResource.java:315, MS_SHOULD_BE_FINAL, Priority: High
com.cloud.hypervisor.vmware.resource.VmwareResource.s_serviceContext isn't final but should be
VmwareResource.java:331, MS_SHOULD_BE_FINAL, Priority: High
com.cloud.hypervisor.vmware.resource.VmwareResource.s_powerStatesTable isn't final but should be
Signed-off-by: Daan Hoogland <daan.hoogland@gmail.com>
This closes#363
KVM hosts which are actuall up, but if their agents are shutdown should be put
in disconnected state. This would avoid getting the VMs HA'd and other commands
such as deploying a VM will exclude that host and save us from errors.
The improvement is that, we first try to contact the KVM host itself. If it fails
we assume that it's disconnected, and then ask its KVM neighbours if they can
check its status. If all of the KVM neighbours tell us that it's Down and we're
unable to reach the KVM host, then the host is possibly down. In case any of the
KVM neighbours tell us that it's Up but we're unable to reach the KVM host then
we can be sure that the agent is offline but the host is running.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#340
When executing the tests in an environment where Libvirt is also installed, it
caused errors.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#342
Maven was bulding the project and executing the tests just fine because it uses "-sourcepath". However,
with IDEs and javac it would fail.
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#317
Pull average Cpu util report between polling intervals instead of since boot
instead of using values since uptime
(cherry picked from commit 04176eaf17)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/LibvirtComputingResource.java
This closes#297
Passing the file argument to the xml break for EL 7.1, the fix removes
the argument as just passing rombar='off' with its file arg to be empty string.
This closes#290
(cherry picked from commit aafa0c80b3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
EL7 has a different output to 'free', use /proc/meminfo instead of a tool to be
more consistent across distros
(cherry picked from commit 212a05a345)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/LibvirtComputingResource.java
Removing real IPs from the tests because they cause a long running time for LibvirtComputingResourceTest
- In a local machine it takes 1.977s, but in a KVM test environment it's taking 257.879 sec
Fixing typo on LibvirtRequestWrapper
- Replace linbvirtCommands by libvirtCommands on LibvirtRequestWrapper
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#255
- The test was okay, but when running in an environment where a /root/.ssh/id_rsa existed, it would return true then fail
- We now mock the calls to methods that return the key paths, instead of relying in the static variables
- Adding LibvirtNetworkElementCommandWrapper and LibvirtStorageSubSystemCommandWrapper
- 2 unit tests added
- KVM hypervisor plugin with 22.2% coverage
I also refactored the StorageSubSystemCommand interface into an abstract class
- Remove the pseudo-multiple-inheritance implementation
- The StorageSubSystemCommand was an interface, not related to the Command class
and its implementation were extending the Command class anyway. The whole structure is better now.
- Addin LibvirtPvlanSetupCommandWrapper
- 6 unit tests added
- KVM hypervisor plugin with 21% coverage
From the 6 tests added, 2 were extra tests to increase the coverage of the LibvirtStopCommandWrapper
- Increased from 35% to 78.7%
- Adding LibvirtCopyVolumeCommandWrapper
Refactoring the LibvirtUtilitiesHelper
- Changing method name
Did not add any test to this commit due to the refactor mentioned abot.
Will proceed and add the tests
i# Please enter the commit message for your changes. Lines starting
- Gave it a better, more suggestive, name since I now added other methods to the class.
- It makes easier to mock objects and get a better coverage of the classes
- Adding LibvirtBackupSnapshotCommandWrapper, LibvirtCreatePrivateTemplateFromVolumeCommandWrapper and LibvirtManageSnapshotCommandWrapper
- 3 unit tests added
- KVM hypervisor plugin with 18.3% coverage
Less tests added to those classes because the code is quite complex and way too long.
The tests added are just covering the new flow, to make sure it works fine. I will come back to those classes later.
- Adding LibvirtOvsDestroyBridgeCommandWrapper, LibvirtOvsSetupBridgeCommandWrapper
- 4 unit tests added
- KVM hypervisor plugin with 13.9% coverage
More tests added to cover LibvirtPrepareForMigrationCommandWrapper
- Coverage of this wrapper broght from 37% to 90.6%
- 4 new tests added
- Adding LibvirtCheckConsoleProxyLoadCommandWrapper, LibvirtConsoleProxyLoadCommandWrapper, LibvirtWatchConsoleProxyLoadCommandWrapperand CitrixConsoleProxyLoadCommandWrapper
- 2 unit tests added
- KVM hypervisor plugin with 12% coverage
Refactored the CommandWrapper interface in order to remove the esecuteProxyLoadScan, which is now
implemented bu subclasses.
- Adding LibvirtGetHosStatsCommandWrapper
- 1 unit test added
- KVM hypervisor with 10.5% coverage
Tests are a bit limited on this one becuause of the current implementation. Would clean it up later in a separate branch
- Adding LibvirtGetVmStatsCommandWrapper
- 3 unit tests
Refactored the LibvirtConnectiobn by surrounding it with an wrapper.
- Make it easier to cover the static/native calls
- Added better coverage to StopCommand tests
- Adding LibvirtStopCommandWrapper
- LibvirtRequestWrapper
- 1 unit tests
Refactored the RequestWrapper to make it better.
- Changes also applied to the CitrixRequestWrapper
Linux kernel supports vmxnet3, allowing it in KVM plugin would allow us to
run ESX hosts on KVM hosts using CloudStack with vmxnet3 nic which can be
passed as VM's nicAdapter detail
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit e02d787f30)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This improvements checks for "guest.cpu.features" property which is a space
separated list of cpu features that is specific for a host. When added, it
will add <feature policy='require' name='{{feature-you-listed}}'/> in the
<cpu> section of the generated vm spec xml.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit ea7fd37783)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The only artifact resolved from libvirt.org was org.libvirt:libvirt:0.5.1
this artifact is now available from maven's default central repository
This closes#180
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
As suggested by Wido on the dev ML changing the repo to eu.ceph.com to avoid
build failures. Will revert if ceph.com is up again.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit c9fd57fff3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CentOS 7 does not ship with ifconfig anymore. We should use ip commands instead.
This also works on older versions, like CentOS 6 and Ubuntu 12.x/14.x, that we
support.
This closes#165
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- use sticky chmod 1777 on the mountpoint
- remove dead code
(cherry picked from commit eea716b791)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
1. provide compatibility with the Big Cloud Fabric (BCF) controller
L2 Connectivity Service in both VPC and non-VPC modes
2. virtual network terminology updates: VNS --> BCF_SEGMENT
3. uses HTTPS with trust-always certificate handling
4. topology sync support with BCF controller
5. support multiple (two) BCF controllers with HA
6. support VM migration
7. support Firewall, Static NAT, and Source NAT with NAT enabled option
8. add VifDriver for Indigo Virtual Switch (IVS)
This closes#151
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- With the changes added by the rVPC work, the bump priority became deprecated.
This commit includes a refactor to get it removed from the following resources:
* Java classes
* domain_router table - removing the is_priority_bumpup column
* Fixing unit tests
All changes were tested with:
XenServer 6.2 running under our VMWare zone
CloudStack Management Server running on MacBook Pro
MySql running on MackBook Pro
Storage Type: Local
Started the refactor of the XenServer56Resource class
- Unit test added
Changing the CitrixRequestWrapper in order to cope with multiple resources classes and commands
Still have to remove few methods form CitrixResourceBase
- Unit tests added
In the executeRequest I needed to keep the following:
// We need this one because the StorageSubSystemCommand is from another hierarchy.
if (cmd instanceof StorageSubSystemCommand) {
return storageHandler.handleStorageCommands((StorageSubSystemCommand) cmd);
}
- Added basic tests
- Changed the way RebootCommand gets called from RebootRouterCommand
- Made a couple of methods public in the CitrixResourceBase and its subclasses
Sonarcube is great, but has no context and can be wrong, in this
case File.separator is nice if you're running platform independent,
the agent on OVM3 is however NOT platform independent and will break
if we feed it windows separators.
The copy command reply can have null size returned, so check and set values
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 53ca0b1861)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fix: RTNETLINK errors
- Management Server health check trying to create already existing interface
- Changes on update_config.py, cs_guestnetwork.py, merger.py
Fix: replace RRouTER_LOG in the CsRedundant.py per log file location
Fix: Guest Net address association during Router restart
- Changes on NicProfileHelper, NicProfileHelperImpl
Fix: aggregationExecution() method on VirtualNetworkApplianceManagerImpl
- Do not send an AggregationControlCommand to a non-configured router
Some classes have been formatted.
Added a source column to the user table.
Source now has only two values UNKNOWN,LDAP with UNKNOWN being the
default and is an enum is com.cloud.User.
When the source is UNKNOWN, the old method of authenticating against all
the available authenticators is used. If a source is available, only
that particular authenticator will be used.
added overloaded methods in AccountService to createUserAccount and
createUser with source specified.
(cherry picked from commit 5da733072e)
MigrateVMWithVolumes-
1. If ESXi host version is below 5.1, ensure destination datastore(s) is mounted on the source host, then migrate the storage and then finally migrate the VM.
If destination storage(s) is not mounted on the source host,
- In case of NFS storage mount the storage(s).
- In case of VMFS storage fail the request for migration.
2. If EXi host version is 5.1 or above, simultaneously migrate the VM and its storage to the destination host and storage(s) respectively for both NFS and VMFS storage.
This is a plugin that puts in ovm3 support ranging from 3.3.1 to 3.3.2. Basic
functionality is in here, advanced networking etc..
Snapshots only work when a VM is stopped now due to the semantics of OVM's raw
image implementation (so snapshots should work on a storage level underneath the
hypervisor shrug)
This closes#113
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When there is large size VR configuration (aggregate commands) copying data to VR using vmops plugin was failed
because of the ARG_MAX size limitation. The configuration data size is around 300KB.
Updated this to create file in host by scp with file contents. This will create file in host.
Then copy the file from the host to VR using hte vmops createFileInDomr method.
In host file get created in /tmp/ with name VR-<UUID>.cfg, once it copied to VR this file will be removed.
Refactored to use the XPatch expressions to check the generated domain xml rathern than string comparison.
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Rafael da Fonseca
Sateesh Chodapuneedi
Daan Hoogland
wilderrodrigues
Rohit Yadav
Jayapal
Wido den Hollander
Laszlo Hornyak
Anshul Gangwar
Daan Hoogland
Rajani Karuturi
Likitha Shetty
Remi Bergsma
KC Wang
Daan Hoogland
Funs
afornie
Hugo Trippaers
Sanjay Tripathi
punith-cloudbyte
Marcus Sorensen
Mike Tutkowski