Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9619: Updates for SAN-assisted snapshotsThis PR is to address a few issues in #1600 (which was recently merged to master for 4.10).
In StorageSystemDataMotionStrategy.performCopyOfVdi we call getSnapshotDetails. In one such scenario, the source snapshot in question is coming from secondary storage (when we are creating a new volume on managed storage from a snapshot of ours thats on secondary storage).
This usually worked in the regression tests due to a bit of "luck": We retrieve the ID of the snapshot (which is on secondary storage) and then try to pull out its StorageVO object (which is for primary storage). If you happen to have a primary storage that matches the ID (which is the ID of a secondary storage), then getSnapshotDetails populates its Map<String, String> with inapplicable data (that is later ignored) and you dont easily see a problem. However, if you dont have a primary storage that matches that ID (which I didnt today because I had removed that primary storage), then a NullPointerException is thrown.
I have fixed that issue by skipping getSnapshotDetails if the source is coming from secondary storage.
While fixing that, I noticed a couple more problems:
1) We can invoke grantAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
2) We can invoke revokeAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
I have corrected those issues, as well.
I then came across one more problem:
When using a SAN snapshot and copying it to secondary storage or creating a new managed-storage volume from a snapshot of ours on secondary storage, we attach to the SR in the XenServer code, but detach from it in the StorageSystemDataMotionStrategy code (by sending a message to the XenServer code to perform an SR detach). Since we know to detach from the SR after the copy is done, we should detach from the SR in the XenServer code (without that code having to be explicitly called from outside of the XenServer logic).
I went ahead and changed that, as well.
JIRA Ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-9619
* pr/1749:
CLOUDSTACK-9619: Updates for SAN-assisted snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
Fixed return type Void to void in DataMotionStrategy.The main changes are:
- Changing methods Void to void.
- Removal of the method Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback<CopyCommandResult> callback) that was
never used.
We noticed that methods form that class are using the return type Void
with capital V. This way that method has to return a null value at the
end.
Removed trim lines from XenServerStorageMotionStrategy.
The trim lines were removed from XenServerStorageMotionStrategy.
* pr/969:
Changed return of methods from DataMotionStrategy, Void to void
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The main changes are:
• Changing methods “Void” to “void”.
• Removal of the method “Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback callback)” that was never used. We
noticed that methods form that class are using the return type Void with
capital V. This way that method has to return a null value at the end.
the folder column. For an smb share the smb credentials are in the query string of the path.
Before adding the path, smb shares query string should be cleaned up.
storage pool (SMB) and attached to a running vm can be live migrated to another shared storage
pool. Also a vm and its volumes can be live migrated to another host and storage pool respectively.
Instead of injecting object of VolumeOrchestrationService into VmwareResource, we now populate the command object (MigrateVolumeCommand here) with required information. Thus we dont need volume orchestration service to query that information from resource.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Mike Tutkowski
Rohit Yadav
Abhinandan Prateek
Harika Punna
Rajani Karuturi
Rajani Karuturi
Mike Tutkowski
Syed
nvazquez
Will Stevens
Remi Bergsma
weingartner
Likitha Shetty
Daan Hoogland
Hiroki Ohashi
Hugo Trippaers
Devdeep Singh
Min Chen
Sateesh Chodapuneedi