Adding the missing file
During HA and maintenance call different planners (if the original planners are not able to find capacity) which skip some heurestics
brought back up after being down for few hours,snapshot jobs do not get
triggered with reason "there is other active snapshot tasks on the
instance to which the volume is attached".
The systemvm iso file is copied only when a systemvm or router vm is to be started on
a host. The file gets copied to the secondary storage. The mount point used is the one
that has permissions for regular user to mount a share.
CLOUDSTACK-5275: The failure was because a secondary storage wasn't available when the
host was added. When a setup is done through wizard the hosts get added before the
secondary storage. CS was tying to copy yhe systemvm iso to secondary and it used to
fail if it wasn't available. Made a change to copy the iso only when a systemvm is
being started on a host.
CLOUDSTACK-5202: Made changes to clean up mount points on stop and start.
All the three are related fixes; so putting a fix in one commit.
1. Egress default policy rules is send to the firewall provider. It is up to the
provider to configure the rules.
2. The default policy rules are send for both allow and deny default policy.
3. On network shutdown rules for delete are send.
4. For VR and SRX, by default deny the traffic. So no default rule to deny traffic is required.
service and not used for LB
Fix adds a boolean flag to addNetscalerLoadBalancer api, which
will mark added NetScaler for exclusive GSLB service. A netscaler marked
as exclusive gslb service provider is not picked for any guest network's
lb provider.
This patch adds support for trust chains in the netscaler.
I initially planned on using the 10.1 API's "bundle" feature but during
my testing I found that was not working. So I am doing the chain linking
myself. Also NS can have only one entity of a certificate ie lets say
two different users try to add the same certificate on the netscaler
only one of them will go through. The other one says resouce already
exists even though they have different files.
This can be a problem in trust chains where the chain can be shared
between multiple accounts/certificates. So, I am using the figerprint as
an identifier of a certificate and making sure that we delete it only
when no one references it.
While VRs upgrade, cloudstack should still be able to work with older
/newer version of the scripts within VRs. To allow this, the simulator
needs to send the version strings for the domr version response or the
VR start is interrupted.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
In VMware during VM start the existing disk information is used to configure the VMs. So even if a new disk is created using the new template VM continues to use the old disk.
Once the old root disk is marked for destroy force expunge it and sync the new disk into the VM folder before VM start
- the result of dividing long with long resulted in loss of precision both for network and IO
- unit tests included
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
replace vlanid wih broadcast uri to support vxlan to identify whether id is VLAN ID or VNI
Signed-off-by: ynojima <mail@ynojima.net>
Signed-off-by: Hugo Trippaers <htrippaers@schubergphilis.com>
Those bugs are related to classes not implementing Serializable, nox overriding the equals and/or hashCode methods and with empty finalize method.
Signed-off-by: Hugo Trippaers <htrippaers@schubergphilis.com>
This patch adds a network plugin to support Palo Alto Networks firewall (their appliance and their VM series firewall).
More information in the FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Palo+Alto+Firewall+Integration
Features supported are:
- List/Add/Delete Palo Alto service provider
- List/Add/Delete Palo Alto network service offering
- List/Add/Delete Palo Alto network with above service offering
- Add instance to the new network (creates the public IP and private gateway/cidr on the PA as well as the source nat rule)
- List/Add/Delete Ingress Firewall rule
- List/Add/Delete Egress Firewall rule
- List/Add/Delete Port Forwarding rule
- List/Add/Delete Static Nat rule
- Supports Palo Alto Networks 'Log Forwarding' profile globally per device (additional docs to come)
- Supports Palo Alto Networks 'Security Profile Groups' functionality globally per device (additional docs to come)
Knowns limitations:
- Only supports one public IP range in CloudStack.
- Currently not verifying SSL certificates when creating a connection between CloudStack and the Palo Alto Networks firewall.
- Currently not tracking usage on Public IPs.
Signed-off-by: Sheng Yang <sheng.yang@citrix.com>
Fixing rebase issues after integrating with wmi v2 implementation.
Removing the executable attribute from some files.
Remove the unused wmi v1 interface file.
Unit test for DestroyCommand implementation in hyperv agent.
Fixed VM state changes w.r.t wmi version 2 changes
If a VM is already running, deploy virtual machine shouldn't fail and throw an exception.
Don't run vhd-util on templates which are present on CIFS. Hyperv uses cifs as secondary storage
Add a SCSI controller by default. This is needed so that data volumes can be added/removed
on a running vm.
Remove the hard coded path in the agent code.
Rat fixes for hyper agent. Added the missing headers in files where it was missing.
Copy the iso to the secondary storage and let the hypervisor agent know of its
location during setup. The agent will copy it over once it handles the setup
command.
Changes for attaching the systemvm iso to virtual router will booting it -
part 2. The agent copies over the systemvm iso during setup. When a
virtual router is being booted it attaches the iso to it.
Hyperv unit tests for the agent. Unit tests are written using NSubstitute and XUnit and
they test the create, stop and start commands in the agent.
Fix to make sure the hyperv agent and the funcitonal tests are working after the unit tests update.
Fixing the warnings while running unit tests for hyper agent.
Added a new switch for functional tests.
Update the unit test to create a fake vhd file on the fly and run the test. The file is removed when the test completes.
Fix for functional tests. The test was failing to build on java 1.6.
Fix to bring up SSVM and Console Proxy systemvms
Fix to discover the seeded template to bring up the systemvm's for the first startup and fixed UNC path isues
Fixed the UNC path for copying the files from CIFS, and from seeded template
Fixed the issues for ssvm and cpvm to wait until it gets configured and then return the status. Made checksum method to return true.
Fixed HypervDirectConnect resource to figure out the status of systemvms, Need to fix this issue by connecting to public/control ip instead of local ip
checksum is failing for the copied system vm images, currently bypassing.
Implemented commands that are required for VR to bootup and Vm deployment to work
Modified hyperv agent code, to deploy VR with Boot Args, boot args passed to VR using KVP Exchange Component.
Fix for VR to boot up and get configured with boot args, Fixed issue in VolumeOrchestrator
Implemented SetFirewallRulesCommand in HyperV Resource
Implemented VR network commands to provide the necessary services from VR
Fixed hyperv localstorage path encode url issue. encode is converting space to '+'
architecture allows additional functionality to be easily added. Incorporating the plugin in CloudStack will allow
the community to participate in improving the features available with Hyper-V. The plugin uses a Director Connect
Agent architecture described here: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Progress
Add ability to pass kvp data via the key cloudstack-vm-userdata
Rearrange code to make it clearer what .NET objects are being used.
Test failures are easier to deal with if test key is not deleted.
Acquire management/pod ip for control ip when VR deploys in HyperV
Fixed deletion on VM's on hyperv host when mgmt server gets restarted due to HA
Implementation for attach iso command. Attaches an iso to a given vm.
Detail: getPhysicalDisk() was not matching on volumes with .raw, so
instead setting disk format to QCOW2.
BUG-ID: CLOUDSTACK-5018
Bugfix-for:
Reviewed-by:
Reported-by:
Signed-off-by: John Kinsella <jlk@stratosec.co> 1383287538 -0700
Now VPN connection can be created as "passive", which would enable the ability
of remote peer initiate the connection. So it's possible for VPC VR to
establish the connection to another VPC VR of CloudStack.
Test case also included.
The test case would create 2 vpcs and using VPN to connect them.
1) vxlan will use bridge scheme 'brvx-<vni>'. Multiple physical networks can host guest
traffic type with vxlan isolation, so long as they don't use the same VNI range.
2) Guest traffic labels can be physical interface if bridge by given name is not found.
Normally we take traffic label name, find the matching bridge, then resolve that to a
physical interface. Then we create guest bridges on that interface. Now we can just
specify the interface.
TODO:
1. error handling of no domains present, nested hierarchy
2. handling the case when the api call fails for a specific user/users
3. test cases for LdapUserManager
Signed-off-by: Ian Duffy <ian@ianduffy.ie>
When a ROOT volume is created from base template, if a folder already exists for the ROOT volume's VM then replace the old ROOT disk files with the new one.
The simulator uses the default planners of cloudstack and does not
require a separate planner context (as of now). This was just c&p from
baremetal planners.
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
Currently any new API extension to CloudStack must edit
commands.properties to add the appropriate ACLs. This generally works
fine for ACS as we control the contents of that file and distribute
all the code ourself. The hang up comes when somebody develops code
outside of ACS and want to add their code to an existing ACS
installation. The Spring work that has been done has made this much
easier, but you are still required to manually edit
commands.properties. This change introduces the following logic.
First check commands.properties for ACL info. If ACL info exists, use
that to authorize the command. If no ACL information exists (ie
null), then look at the @APICommand annotation. The defaults of
@APICommand will provide no ACL info. If the @APICommand annotation
provides no ACL info, use that.
commit c9ee0d12e191e803fb341f3f96e95ca434a36f6c
Author: Wei Zhou <w.zhou@leaseweb.com>
Date: Wed Oct 23 16:55:10 2013 +0200
CLOUDSTACK-4931, CLOUDSTACK-4937: setDetails to user VMs only
(cherry picked from commit a94acc5a43)
commit fe1586c71377bc6d219db2dcf088c40b65dd1fc4
Author: Anthony Xu <anthony.xu@citrix.com>
Date: Tue Oct 22 11:20:27 2013 -0700
CLOUDSTACK-4649:
vm sync tracks the pv driver version for xenserver
Anthony
commit 56a218f66eda540b4b4b04030ee71fc6863f8532
Author: Anthony Xu <anthony.xu@citrix.com>
Date: Mon Oct 21 16:10:07 2013 -0700
CLOUDSTACK-4649:
xs 6.1/6.2 introduce the new virtual platform, so there are two virtual platforms, windows PV driver version must match virtual platforms,
this patch tracks PV driver versions in vm details and template details.
Anthony
commit 4e85d28c678a6f96b5b70d8d33fc60f9d1ea3df6
Author: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Date: Mon Oct 21 21:17:33 2013 +0200
removed unused static field
- s_httpClientManager was not used
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
commit d4121fa26023db236f7396cea455ef090672ae9a
Author: Chris Suich <chris.suich@netapp.com>
Date: Tue Oct 22 10:45:22 2013 -0400
Updated DataMotionServiceImpl and ApiResponseHelper based on review feedback.
commit aaf026e1e4204d405bcda2ae4f1a01b1d0f7e7cb
Author: Chris Suich <chris.suich@netapp.com>
Date: Thu Oct 17 14:27:12 2013 -0400
Added context to strategy sorting error responses
Added TODOs for DRYing out pickStrategy() overloading
commit a221f4aa3fb2ddc255bc35cf753f98f88f5bf44e
Author: Chris Suich <chris.suich@netapp.com>
Date: Wed Oct 16 09:57:28 2013 -0400
Updated inefficient strategy sorting/selection
Removed unnecessary canRevertSnapshot from PrimaryDataStoreDriver
Other general cleaup and fixes from reviews
commit 7d58949c6a1b7e853e891b59387a9620e8cd7a91
Author: Chris Suich <chris.suich@netapp.com>
Date: Mon Oct 14 14:01:22 2013 -0400
Added volume snapshot revert capability to SnapshotResponse
Updated UI to hide/show snapshot revert action per snapshot
Signed-off-by: Edison Su <sudison@gmail.com>
xs 6.1/6.2 introduce the new virtual platform, so there are two virtual platforms, windows PV driver version must match virtual platforms,
this patch tracks PV driver versions in vm details and template details.
Anthony
Detail: Checks for other Ethernet interface names uses startsWith(),
whereas the p1p1 style interface uses a regex that doesn't allow for
tailing characters, and so blocks vlan IDs. Fixed.
BUG-ID: CLOUDSTACK-4884
Bugfix-for: 4.2.1
Reviewed-by:
Reported-by:
Signed-off-by: John Kinsella <jlk@stratosec.co> 1381965250 -0700
Introduction of a new Transaction API that is more consistent with the style
of Spring's transaction managment. The existing Transaction class was renamed
to TransactionLegacy. All of the non-DAO code in the management server has been
updated to use the new Transaction API.
I don't think host kernel version has any bearing on it. Original code
was tested with CentOS 6.3 and 6.4, but it seems to succeed or fail per-host,
e.g. a fast host might work and a slow host might not. I was getting intermittent
failures with ubuntu 12.04.3 prior to this patch.
These changes are a joint effort between Edison and I to refactor some
of the code around snapshotting VM volumes and creating
templates/volumes from VM volume snapshots. In general, we were working
towards allowing PrimaryDataStoreDrivers to create snapshots on primary
storage and not requiring the snapshots to be transferred to secondary
storage.
High level changes:
-Added uuid to NfsTO, SwiftTO & S3TO to cut down on the requirement of
PrimaryDataStoreTO and ImageStoreTO which don't really serve much of a
purpose
-Initial work towards enable reverting VM volume from snapshots
-Added hypervisor commands for introducing and forgetting new hypervisor
objects (snapshots, templates & volumes)
Signed-off-by: Edison Su <sudison@gmail.com>
ACS is now comprised of a hierarchy of spring application contexts.
Each plugin can contribute configuration files to add to an existing
module or create it's own module.
Additionally, for the mgmt server, ACS custom AOP is no longer used
and instead we use Spring AOP to manage interceptors.
The managed context framework provides a simple way to add logic
to ACS at the various entry points of the system. As threads are
launched and ran listeners can be registered for onEntry or onLeave
of the managed context. This framework will be used specifically
to handle DB transaction checking and setting up the CallContext.
This framework is need to transition away from ACS custom AOP to
Spring AOP.
Various classes are using member injection to inject extensible objects.
Really those object should come from an AdapterList that is injected in.
This patch switches the code to use setter injection that will later allow
spring to inject an AdapterList or something similar to allow
extensibility.
DefaultUserAuthenticator maskes the _name varible in ComponentLifecycleBase
making the setName() method not work as expected. This patch cleans up the
code such that getName() will be getClass().getSimpleName() unless
overridden in the Spring configuration.
Edison Su
Nitin Mehta
Min Chen
Marcus Sorensen
Likitha Shetty
Devdeep Singh
Rajani Karuturi
Alex Huang
Donal Lafferty
Bharat Kumar
Anthony Xu
Jayapal
tuna
Will Stevens
Murali Reddy
Wido den Hollander
Anshul Gangwar
Syed Ahmed
Rajesh Battala
Alena Prokharchyk
Wei Zhou
wilderrodrigues
Darren Shepherd
Hugo Trippaers
Ian Duffy
afornie
Kelven Yang
Prasanna Santhanam
Laszlo Hornyak
John Kinsella
Chris Suich
Sheng Yang
ynojima
Mike Tutkowski
wilderrodrigues
Harikrishna Patnala
Pedro Marques
Koushik Das
dhoogland
Darren Shepherd