CLOUDSTACK-9720: [VMware] template_spool_ref table is not getting updated with correct template physical size in template_size column.Updated the template_spool_ref table with the correct template (VMware - OVA file) size.
* pr/1880:
CLOUDSTACK-9720: [VMware] template_spool_ref table is not getting updated with correct template physical size in template_size column.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Currently ACS waits for 15 seconds (hard coded) for hot-plugged NIC in VR to get detected by guest OS.
The time taken to detect hot plugged NIC in guest OS depends on type of NIC adapter like (E1000, VMXNET3, E1000e etc.)
and guest OS itself. In uncommon scenarios the NIC detection may take longer time than 15 seconds,
in such cases NIC hotplug would be treated as failure which results in VPC tier configuration failure.
Alternatively making the wait timeout for NIC adapter hotplug as configurable will be helpful for admins in such scenarios.
Also in future if VMware introduces new NIC adapter types which may take time to get detected by guest OS, it is good to have flexibility of
configuring the wait timeout as fallback mechanism in such scenarios.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
Issue
====
Exception occured while creating the CPVM in the VmWare Setup using standard vswitches.
StartCommand failed due to Exception: com.vmware.vim25.AlreadyExists
message: [] com.vmware.vim25.AlreadyExistsFaultMsg: The specified key, name, or identifier already exists
Fix
===
Ensure synchronization while attempting to create port group such that simultaneous attempts are not made with same port group name on same ESXi host.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor## Introduction
[JIRA TICKET](https://issues.apache.org/jira/browse/CLOUDSTACK-9379)
It is desired to support nested virtualization at VM level for VMware hypervisor. Current behaviour supports enabling/desabling global nested virtualization by modifying global config `'vmware.nested.virtualization'`. It is wished to improve this feature, having control at VM level instead of a global control only.
A new global configuration is added, to enable/disable VM nested virtualization control: `'vmware.nested.virtualization.perVM'`. Default value=false
After a vm deployment or start command, vm params include `'nestedVirtualizationFlag'` key and its value is:
- true -> nested virtualization enabled
- false -> nested virtualization disabled
**We will determinate nested virtualization enabled/disabled by examining this 3 values:**
- **(1)** global configuration `'vmware.nested.virtualization'` value
- **(2)** global configuration `'vmware.nested.virtualization.perVM'` value
- **(3)** `'nestedVirtualizationFlag'` value in `user_vm_details` if present, `null` if not.
Using this 3 values, there are different use cases:
- **(1)** = TRUE, **(2)** = TRUE, **(3)** is null -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = TRUE, **(2)** = FALSE, **(3)** indifferent -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** is null -> _DISABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = FALSE, **(2)** = FALSE, **(3)** indifferent -> _DISABLED_
* pr/1542:
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
* 4.9:
CLOUDSTACK-8830: Fix for vm snapshots in Vmware, could not create vm snapshot until 12 minutes after vm creation due to vCenter sent null name on snpashot recent task
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
- Refactor and move VirtualMachineDiskInfo to cloud-utils
- Allows mixing of scsi controller types
- Fixes a NPE case with map passed as null, for example in case of detach volume
command
- Use a osdefault translator that allow use of recent os types added (enums of
which) are not available in the sdk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMfor xenserver,kvm and for vmware.
* pr/780:
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Kishan Kavala <kishan@apache.org>
CLOUDSTACK-9252: Support configurable NFS version for Secondary Storage mountsJIRA Ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9252
### Description of the problem
After starting secondary storage VM, secondary storage tries to be mounted but fails with error: <code>Protocol family not supported</code>
It was found out that adding <code>-o vers=X</code> to mount command it would work, where <code>X</code> is the desired NFS version to use.
If it is desired to mount a store with a specific NFS version, it has passed in <code>image_store_details</code> table for a store with id <code>Y</code> as a property:
| store_id| name| value |
|:-------------:|:-------------:|:-------------:|
|Y|nfs.version|X (e.g. 3)|
Where X stands for NFS version
* pr/1361:
CLOUDSTACK-9252: Last refactor, passing nfs version to ssvm
CLOUDSTACK-9252: Add missing licence header
CLOUDSTACK-9252: Little refactor
CLOUDSTACK-9252: Mock application context for unit test
CLOUDSTACK-9252: Add unit tests
CLOUDSTACK-9252: New refactor
CLOUDSTACK-9252: Remove static dependencies, refactor
CLOUDSTACK-9252: Remove duplicates getNfsVersion, refactor
CLOUDSTACK-9252: Support configurable nfs version
CLOUDSTACK-9252: Add nfs version to commands
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
CLOUDSTACK-9211: Support passing vRAM size to support 3D GPU on VmwareJIRA TICKET:
https://issues.apache.org/jira/browse/CLOUDSTACK-9211
CS support passing hypervisor options by creating entries in <code>vm_template_details</code> or <code>user_vm_details</code>
To enable software 3D GPU 4 options needs to be added:
| name| value |
|:-------------:|:-------------:|
|mks.enable3d|true|
|mks.use3dRenderer|automatic|
|svga.autodetect|false|
|svga.vramSize|(size in KB) e.g. 131072|
Currently all options except <code>svga.vramSize</code> works, VMs always get configured with default 64Mb videoRAM instead of the one provided on the option.
* pr/1310:
CLOUDSTACK-9211: Unit test for 3dgpu support
CLOUDSTACK-9211: Refactor vm vram size setter method
CLOUDSTACK-9211: Add javadoc and refactor method
CLOUDSTACK-9211: Support passing vRAM size to support 3D GPU on Vmware
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Daan Hoogland
Rajani Karuturi
Suresh Kumar Anaparti
Sateesh Chodapuneedi
nvazquez
Rohit Yadav
Suresh Kumar Anaparti
John Burwell
Abhinandan Prateek
Murali Reddy
Mike Tutkowski
Will Stevens
Maneesha.P
Kishan Kavala
gabrascher
Rafael Weingärtner