This commit allows deploying VMs with a specific IPv4 address.
DirectPodBasedNetworkGuru does not support requesting a custom
IP-Address while creating a new NIC/Instance, throwing the following
error:
Error 530: Does not support custom ip allocation at this time:
NicProfile[0-0-null-null-null
Unknown macro: { "cserrorcode"}
Some use-cases prefer the ability to request the IPv4 address which the
Instance will get.
This implementation adds unit test cases to cover and it was manually
tested in Basic Networking. I can perform more tests if requested.
With earlier work in Basic Networking and the security group provider IPv6 is
supported and we can allow IPv6 to be supplied in networks with SG enabled.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The view "service_offering_view" doesn't include removed SOs, as a result when SO is removed, the bug happens. The PR introduces a change for resource calculation changing "service_offering_view" to "service_offering" table which has all service offerings.
Must be fixed in:
4.12
4.11
Fixes: #3009
This adds a new API updateVmwareDc that allows admins to update the
VMware datacenter details of a zone. It also recursively updates
the cluster_details for any username/password updates
as well as updates the url detail in cluster_details table and guid
detail in the host_details table with any newly provided vcenter
domain/ip. The update API assumes that there is only one vCenter per
zone. And, since the username/password for each VMware host could be different
than what gets configured for vcenter at zone level, it does not update the
username/password in host_details.
Previously, one has to manually update the db with any new vcenter details for the zone.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Remove some unused Classes
These classes were deleted because they have no references in our code base. They are not in Spring execution flow nor instantiated with "new":
- com.cloud.agent.api.CheckStateAnswer
- com.cloud.agent.api.StartupVMMAgentCommand
- com.cloud.agent.api.routing.UserDataCommand
- remove from description at
com.cloud.configuration.Config.ExecuteInSequenceNetworkElementCommands
enum
- com.cloud.agent.api.storage.UpgradeDiskCommand
- com.cloud.agent.api.storage.CreatePrivateTemplateCommand
- com.cloud.agent.api.storage.DestroyAnswer
- Note: "FIXME: Should have an DestroyAnswer" at
com.cloud.storage.resource.StoragePoolResource
- com.cloud.agent.api.storage.UpgradeDiskAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityCommand
- com.cloud.exception.UsageServerException
- com.cloud.info.SecStorageVmLoadInfo
- com.cloud.serializer.SerializerHelper
* PR#1448 update description of 'execute.in.sequence.network.element.commands' param
Update description of 'execute.in.sequence.network.element.commands'parameter to reflect an unused command that has been removed. The removed class command is 'UserDataCommand'.
* Add cloud schema to update SQL
This force stops old VRs when performing rolling restart with
cleanup=true. This will ensure that VRs are powered off quickly than
wait longer for the normal ACPI shutdown. During testing, it was found
on VMware where VM stops are slow compared to XenServer and KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This adds a global setting for admins who may not want the rolling
restart of routers or are seeing any issues around it. In future, this
setting may be removed.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These boolean-return methods are named as "getXXX".
Other boolean-return methods are named as "isXXX".
Considering there methods will return boolean values, it should be more clear and consistent to rename them as "isXXX".
(rebase #2602 and #2816)
This fixes a regression introduced in #2799, by exporting $TYPE
before the `patch` is called to patch/extract archives for ssvm/cpvm.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMware router will be rebooted based on #2794, per current config
the VRs on reboot will go through fsck checks slowing down the deployment
process by few seconds. This will ensure that fsck checks are done
on every 3rd boot of the VR. The `4` is used because 1st boot is done
during the build of systemvmtemplate appliance.
Add upgrade path for a new 4.11.2 systemvmtemplate.
Other changes:
- Add support for XS 7.5 Fixes#2834.
- Reboot VR only if mgmt gw is not pingable on vmware.
- Enable passive ftp by enabling nf_conntrack_helper. This is change in behaviour since linux 4.7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Add managed storage pool constraints to MigrateWithVolume API method
* Apply mike's suggestions
* Apply Mike's suggestion in a second review
* Mike's suggestions
* Confused bit
* just executeManagedStorageChecks
* Created methods `executeManagedStorageChecksWhenTargetStoragePoolNotProvided` and `executeManagedStorageChecksWhenTargetStoragePoolProvided`
* improve "executeManagedStorageChecksWhenTargetStoragePoolNotProvided"
* Fix "findVolumesThatWereNotMappedByTheUser" method
* Applu Mike's suggestion to improve "createMappingVolumeAndStoragePool" method
* Unit tests to cover modified code
* CLOUDSTACK-9473: storage pool capacity check when volume is resized or migrated
Storage pool checker is not being called on resize and migrate volume.
This may lead to allocated percentage of storage above 100%.
Setup:
1 VMware cluster with 2 Hosts.
Executed Steps:
Applied the following global settings:
storage.overprovisioning.factor = 1
pool.storage.allocated.capacity.disablethreshold = 1
pool.storage.capacity.disablethreshold = 1
Restarted management server
Executed Resize and migrate pool and Observed that Storage pool checker is not performed on resizeVolume and migrateVolume.
Result:
Root cause analysis shows storage pool checker is not called when doing migration and resizing.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In integration work for CCS I found that the service call UserVmService.destroyVm(long uuid, boolean expunge) does not honour the expunge flag. I traced it down to the implementation VirtualMachineManagerImpl.destroy(String vmUuid, boolean expunge).
Testing: manual testing so far, testing will pose some crosscutting challanges as the behaviour and implementation are seperated by about five layers of abstraction.
* rename package from "src" to "org.apache.cloudstack.storage.vmsnapshot"
* Remove Empty test class "SnapshotDataFactoryTest"
* Remove redundant imports (importing a class from its own package)
* Fix the problem at #1740 when it loads all snapshots in the primary storage
While checking a problem with @mike-tutkowski at PR #1740, we noticed that the method `org.apache.cloudstack.storage.snapshot.SnapshotDataFactoryImpl.getSnapshots(long, DataStoreRole)` was not loading the snapshots in `snapshot_store_ref` table according to their storage role. Instead, it would return a list of all snapshots (even if they are not in the storage role sent as a parameter) saying that they are in the storage that was sent as parameter.
* Add unit test
* 4.11:
Changed the implementation of isVolumeOnManagedStorage(VolumeInfo) to check if the data store in question is for primary storage (and added a unit test from Daan Hoogland)
vmware: reboot VR after mac updates (#2794)
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
This PR fixes NPE with the provisionCertificateCmd when reconnect is set to True.
Also fixes the following Marvin test failures:
- test_certauthority_root.py
Andrija Panic
Gabriel Beims Bräscher
Wido den Hollander
Rohit Yadav
Bitworks LLC
Rohit Yadav
Mike Tutkowski
Nicolas Vazquez
Paul Angus
Kui LIU
René Moser
Frank Maximus
Khosrow Moossavi
Rafael Weingärtner
dahn
lzh3636
SowjanyaPatha
Mike Tutkowski
ernjvr
Dingane Hlaluku