* scaleio: prototype storage plugin
- plugin skeleton
- add storage pool, create/attach data disk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* kvm: attach disk example
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Updated ScaleIO storage plugin to support Volume operations
* ScaleIO storage plugin - Support for VM operations and other updates
* ScaleIO storage pool plugin changes
- Added validation to check existing ScaleIO storage pool and update capacity details
- Updated resize volume for ScaleIO to pick the rounded 8GB boundary size
- Added support for setting ScaleIO storage pool statistics (bandwidthLimitInKbps, iopsLimit)
* Fixed IOPS validation and volume size update when resizing ScaleIO volume
* Removed connect/disconnect disk changes from ScaleIO storage adaptor
- ScaleIO datastore driver does map/unmap ScaleIO volume (from MS) using grant/revoke access
- Not required to map/unmap ScaleIO volume from the storage adaptor
* Updated connect disk, to wait for ScaleIO volume to become available in the KVM host
* Updated ScaleIO storage provider, pool type, url scheme and related paramters to the new "PowerFlex" brand
* Fixed size rounding issue while creating PowerFlex volume and added validations to PowerFlex Gateway API client
* Updated host sdc connection check for ScaleIO/PowerFlex pool on host connect
* Updated volume snapshots support for volumes on ScaleIO/PowerFlex storage pool and Added some validations for ScaleIO disks in host
* Added primary storage level configurable setting "storage.pool.disk.wait" to wait for disk availability
- Confiure the disk availability wait time, mainly introduced for ScaleIO/PowerFlex storage pool (can be used for other managed storages), to wait for the disk to become available in the host before performing any operation on it
* Enabled template spooling to ScaleIO/PowerFlex storage pool and create VM from the spooled template.
Added ScaleIO SDC limits support for volumes using offering parameters: bandwidthLimitInKbps, iopsLimit.
* Added support for VM snapshots on ScaleIO/PowerFlex storage pool
Minor improvements for IOPS (SDC Limits) configuration
* Updated access for ScaleIO/PowerFlex volumes on VM Start and Stop
Added primary storage level configurable setting "storage.pool.client.timeout" for storage API client
Enabled cluster wide storage pool support for ScaleIO/PowerFlex storage
Minor improvements for ScaleIO/PowerFlex disk access in the KVM host
* Added support for direct download of templates (raw, qcow2) on ScaleIO/PowerFlex storage pool
* Added support for config drives in host cache for KVM
- Changed configuration "vm.configdrive.primarypool.enabled" scope from Global to Zone level
- Introduced new zone level configuration "vm.configdrive.force.host.cache.use" (default: false) to force host cache for config drives
- Introduced new zone level configuration "vm.configdrive.use.host.cache.on.unsupported.pool" (default: true) to use host cache for config drives when storage pool doesn't support config drive
- Added new parameter "vm.configdrive.host.cache.location" (default: /var/cache/cloud) in KVM agent.properties for specifying the host cache path for config drives
* Updated disk access while migrating the VM with volumes on ScaleIO/PowerFlex storage pool
Changed the parameter "vm.configdrive.host.cache.location" to "host.cache.location" (default: /var/cache/cloud) in KVM agent.properties to specify the host cache path
Changes to create config drives on the "/config" directory on the host cache path
Changes to suppport migrate VM with config drive on the host cache path
* Additonal changes to support migrate VM with config drive on the host cache
* Detect virtual size from the template URL while registering direct download qcow2 (of KVM hypervisor) templates
Updated full deployment destination for preparing the network(s) on VM start
* Propagate the direct download certificates uploaded to the newly added KVM hosts
* Code improvements for ScaleIO/PowerFlex storage plugin
* Updated storage stats collection and tests for ScaleIO/PowerFlex storage plugin
* Fix for template size of direct download templates on capacity check for ScaleIO/PowerFlex storage pool
Updated data object grant and revoke access for connected SDCs to ScaleIO/PowerFlex storage pool
* Discover the template size for direct download templates using any available host from the zones specified on template registration
When zones are not specified while registering template, template size discovery is performed using any available host, which is picked up randomly from one of the available zones
* Maintain the config drive location and use it when required on any config drive operation (migrate, delete)
* Ensure the volume to be expunged, is expunge ready on storage cleanup
* Do not set the storage migration flag for the volumes on zone wide PowerFlex/ScaleIO pool when listing the hosts available for cross-cluster migration
* Release the VM resources when VM is sync-ed to Stopped state on PowerReportMissing (after graceful period)
* Added alerts for PowerFlex/ScaleIO SDC disconnection on the host(s)
* Retry VM deployment/start when the host cannot access volume/template on the ScaleIO/PowerFlex storage
* Changes to find a potential host that can access the ScaleIO/PowerFlex storage pool
* Updated ScaleIO/PowerFlex storage pool stats for checking the available capacity and usage
* Updated ScaleIO/PowerFlex volumes naming convention to avoid the naming conflicts on sharing
* Mark never-used or downloaded templates as Destroyed on deletion, without sending any DeleteCommand
- Do not trigger any DeleteCommand for never-used or downloaded templates as these doesn't exist and cannot be deleted from the datastore
* Updated ScaleIO/PowerFlex storage pool capacity stats
* Cleanup unused templates and host entries on PowerFlex/ScaleIO storage pool deletion
* Check the router filesystem is writable or not, before performing health checks
- Introduce a new test "filesystem.writable.test" to check the filesystem is writable or not
- The router health checks keeps the config info at "/var/cache/cloud" and updates the monitor results at "/root" for health checks, both are different partitions. So, test at both the locations.
* Updated the router filesystem writable check using script, instead cmd execution
- Added new script: "filesystem_writable_check.py" at /opt/cloud/bin/ to check the filesystem is writable or not
* Update volume stats (physical and virtual size) for the volumes on PowerFlex/ScaleIO storage pool
Co-authored-by: Suresh Kumar Anaparti <suresh.anaparti@shapeblue.com>
* Remove constraint for NFS storage
* Add new property on agent.properties
* Add free disk space on the host prior template download
* Add unit tests for the free space check
* Fix free space check - retrieve avaiable size in bytes
* Update default location for direct download
* Improve the method to retrieve hosts to retry on depending on the destination pool type and scope
* Verify location for temporary download exists before checking free space
* In progress - refactor and extension
* Refactor and fix
* Last fixes and marvin tests
* Remove unused test file
* Improve logging
* Change default path for direct download
* Fix upload certificate
* Fix ISO failure after retry
* Fix metalink filename mismatch error
* Fix iso direct download
* Fix for direct download ISOs on local storage and shared mount point
* Last fix iso
* Fix VM migration with ISO
* Refactor volume migration to remove secondary storage intermediate
* Fix simulator issue
This adds support for JDK11 in CloudStack 4.14+:
- Fixes code to build against JDK11
- Bump to Debian 9 systemvmtemplate with openjdk-11
- Fix Travis to run smoketests against openjdk-11
- Use maven provided jdk11 compatible mysql-connector-java
- Remove old agent init.d scripts
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The VM ingestion feature allows CloudStack to discover, on-board, import existing VMs in an infra. The feature currently works only for VMware, with a hypervisor agnostic framework which may be extended for KVM and XenServer in future.
* * Complete API implementation
* Complete UI integration
* Complete marvin test
* Complete Secondary storage GC background task
* improve UI labels
* slight reword and add another missing description
* improve download message clarity
* Address comments
* multiple fixes and cleanups
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* fix more bugs, let it return ip rule list in another log file
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* fix missing iprule bug
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* add support for ARCHIVE type of object to be linked/setup on secstorage
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Fix retrieving files for Xenserver
* Update get_diagnostics_files.py
* Fix bug where executable scripts weren't handled
* Fixed error on script cmd generation
* Do not filter name for log files as it would override similar prefix script names
* Addressed code review comments
* log error instead of printstacktrace
* Treat script as executable and shell script
* Check missing script name case and write to output instead of catching exception
* Use shell = true instead of shlex to support any executable
* fix xenserver bug
* don't set dir permission for vmware
* Code review comments - refactoring
* Add check for possible NPE
* Remove unused imoprt after rebase
* Add better description for configs
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Rohit Yadav <rohit@apache.org>
Co-authored-by: Anurag Awasthi <anurag.awasthi@shapeblue.com>
* Avgload (#2)
* Adding avgload for kvm
* Fix coding style issue
* Add getter/setter
* Fix several small errors
* Add override
* Uncomment getAverageLoad
* Override getAverageLoad()
* Checkstyle bug?
* Delete trailing spaces
* Renaming function
* Change interface to match
* Rename method in GetHostStatsAnswer
* Change method call name
* Convert double to long
* Remove trailing whitespace
* Change names around
* Make load visible to return it
* Parse string to double
* Change Long to Double
* Fix getter
* Unify naming to cpuloadaverage
* Change cpuloadaverage String to Double in listHostsMetrics
Remove some unnecessary whitespaces
* Add CPU_LOAD_AVERAGE to ApiConstants
When add a acl rule with protocol number, the iptables rules in vpc vr is not applied correctly.
for example, when add an ingress acl rule (protocol number:50, cidr: 2.2.2.2/32), we expect to have a iptables rule: "-A ACL_INBOUND_eth2 -s 2.2.2.2/32 -p esp -j ACCEPT"
the actual rule is "-A ACL_INBOUND_eth2 -j DROP"
It is because the rules in json are not correct.
network_acl.json.a8c52dca-0278-4e1c-b72b-987ca7121f4f.gz:{"device":"eth2","mac_address":"02:00:7d:27:00:02","private_gateway_acl":false,"nic_ip":"192.168.11.12","nic_netmask":"28","ingress_rules":[{"type":"protocol","protocol":50,"cidr":"ACCEPT","allowed":false},{"type":"all","cidr":"0.0.0.0/0","allowed":true},],"egress_rules":[],"type":"networkacl"}
Fixes: #3602
Refactor: Cleanup duplicate code
Make use of Java 8 default implementation in interfaces,
to remove code duplication between XxxCmd and XxxCmdAsAdmin.
Refactor checkFormat by pre-calculating the supported
extensions. Also make use of this in ImageStoreUtil.
Makes it easier to add new file and compression formats.
Problem: In Vmware, appliances that have options that are required to be answered before deployments are configurable through vSphere vCenter user interface but it is not possible from the CloudStack user interface.
Root cause: CloudStack does not handle vApp configuration options during deployments if the appliance contains configurable options. These configurations are mandatory for VM deployment from the appliance on Vmware vSphere vCenter. As shown in the image below, Vmware detects there are mandatory configurations that the administrator must set before deploy the VM from the appliance (in red on the image below):
Solution:
On template registration, after it is downloaded to secondary storage, the OVF file is examined and OVF properties are extracted from the file when available.
OVF properties extracted from templates after being downloaded to secondary storage are stored on the new table 'template_ovf_properties'.
A new optional section is added to the VM deployment wizard in the UI:
If the selected template does not contain OVF properties, then the optional section is not displayed on the wizard.
If the selected template contains OVF properties, then the optional new section is displayed. Each OVF property is displayed and the user must complete every property before proceeding to the next section.
If any configuration property is empty, then a dialog is displayed indicating that there are empty properties which must be set before proceeding
image
The specific OVF properties set on deployment are stored on the 'user_vm_details' table with the prefix: 'ovfproperties-'.
The VM is configured with the vApp configuration section containing the values that the user provided on the wizard.
Fix regression bug that affects KVM local storage migration. Some of the desired execution flows for KVM local storage migration had been altered to allow only managed storage to execute. Fixed allowing managed and non managed storages to execute.
Fixes#3521
This reverts commit 7a27e35a61.
We're near 4.13 RC1, we've low confidence if the changes from #3152
would cause other regressions so reverting this. The author may send a
PR again towards 4.14.
Regressions found are all related to template and iso registration and
upload.
Make use of Java 8 default implementation in interfaces,
to remove code duplication between XxxCmd and XxxCmdAsAdmin.
Refactor checkFormat by pre-calculating the supported
extensions. Also make use of this in ImageStoreUtil.
Makes it easier to add new file and compression formats.
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
When checking if the console proxy URL domain starts with *, the code
does not check if the provided string is null. When domain is not
configured the IP address should be used.
Fixes#3164
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Feature Specification: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=95653548
Live storage migration on KVM under these conditions:
From source and destination hosts within the same cluster
From NFS primary storage to NFS cluster-wide primary storage
Source NFS and destination NFS storage mounted on hosts
In order to enable this functionality, database should be updated in order to enable live storage capacibilty for KVM, if previous conditions are met. This is due to existing conflicts between qemu and libvirt versions. This has been tested on CentOS 6 hosts.
Additional notes:
To use this feature set the storage_motion_supported=1 in the hypervisor_capability table for KVM. This is done by default as the feature may not work in some environments, read below.
This feature of online storage+VM migration for KVM will only work with CentOS6 and possible Ubuntu as KVM hosts but not with CentOS7 due to:
https://bugs.centos.org/view.php?id=14026https://bugzilla.redhat.com/show_bug.cgi?id=1219541
On CentOS7 the error we see is: " error: unable to execute QEMU command 'migrate': this feature or command is not currently supported" (reference https://ask.openstack.org/en/question/94186/live-migration-unable-to-execute-qemu-command-migrate/). Reading through various lists looks like the migrate feature with qemu may be available with paid versions of RHEL-EV but not centos7 however this works with CentOS6.
Fix for CentOS 7:
Create repo file on /etc/yum.repos.d/:
[qemu-kvm-rhev]
name=oVirt rebuilds of qemu-kvm-rhev
baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7Server/
mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el7Server
enabled=1
skip_if_unavailable=1
gpgcheck=0
yum install qemu-kvm-common-ev-2.3.0-29.1.el7.x86_64 qemu-kvm-ev-2.3.0-29.1.el7.x86_64 qemu-img-ev-2.3.0-29.1.el7.x86_64
Reboot host
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Improvements on upload direct download certificates
* Move upload direct download certificate logic to KVM plugin
* Extend unit test certificate expiration days
* Add marvin tests and command to revoke certificates
* Review comments
* Do not include revoke certificates API
Since the CloudStack virtual router was redesigned on version 4.6 it has been observed that the DHCP leases file is not persistent across network operations. This causes conflicts on guest VMs static IPs, causing these static IPs to not be renewed by the DHCP server running on isolated and VPC networks' virtual routers (dnsmasq). On stopping or destroying a VM, its dhcp/dns records are not removed from the virtual router causing ghost effects.
Fixes#3272Fixes#3354
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Fix XenServer Security Groups 'vmops' script
- fix tokens = line.split(':') to tokens = line.split(';')
- fix expected tokens size from 5 to 4
- enhance logs
- remove unused vmops script. The XCP patch points to the vmops script
on the parent folder [1]. Thus, all XenServer versions are considering
the vmops script located at [2].
- fix UI ipv4/ipv6 cidr validator to allow a list of cidirs.
Fixing issue: #3192 Security Group rules not applied at all for
XenServer 6.5 / Advanced Zone
https://github.com/apache/cloudstack/issues/3192
* Update security group rules after VM migration
Add security group rules on target host
Cause: vmops script expected secondary IPs as "0;" but received "0:"
Remove security group network rules on source host.
Cause: destroy_network_rules_for_vm function on vmops script was not
called when migrating VM
* Add unit tests and address reviewers
* feature: add libvirt / qemu io bursting
Adds the ability to set bursting features from libvirt / qemu
This allows you to utilize the iops and bytes temporary "burst" mode
introduced with libvirt 2.4 and improved upon with libvirt 2.6.
https://blogs.igalia.com/berto/2016/05/24/io-bursts-with-qemu-2-6/
* updates per rafael et al
* - Offline VM and Volume migration on Vmware hypervisor hosts
- Also add VM disk consolidation call on successful VM migrations
* Fix indentation of marvin test file and reformat against PEP8
* * Fix few comment typos
* Refactor debug messages to use String.format() when debug log level is enabled.
* Send list of commands returned by hypervisor Guru instead of explicitly selecting the first one
* Fix unhandled NPE during VM migration
* Revert back to distinct event descriptions for VM to host or storage pool migration
* Reformat test_primary_storage file against PEP-8 and Remove unused imports
* Revert back the deprecation messages in the custom StringUtils class to favour the use of the ApacheUtils
* Add Support for InfluxDB on StatsCollector
* Code refactored to fit Inner Class architecture.
Due to the inner class structure, test case for some methods will not be
implemented. On the future it will be necessary to refactor the whole
StatsCOllector architecture and extract inner classes.
Each Inner Class that is a "stats collector" and sends data to Influx
will extend AbstractStatsCollector to send metrics to the correct
measure ("table"). For instance, HostCollector sends data to host_stats,
VmStatsCollector sends data to vm_stats.
Add ping test for ensure that the target InfluxDB host is reachable
* Address PR reviews
* Enhance and tests implemented addressing reviewers.
* Set variables to private
* Allow KVM VM live migration with ROOT volume on file
* Allow KVM VM live migration with ROOT volume on file
- Add JUnit tests
* Address reviewers and change some variable names to ease future
implementation (developers can easily guess the name and use
autocomplete)
Users reported that they weren't getting all apis listed in cloudmonkey when running a sync. After some debugging, I found that the problem is that the ApiDiscoveryService is calling ApiRateLimitServiceImpl.checkAccess(), so the results of the listApis command are being truncated because Cloudstack believes the user has exceeded their API throttling rate.
I enabled throttling with a 25 request per second limit. I then created a test role with only list* permissions and assigned it to a test user. When this user calls listApis, they will typically receive anywhere from 15-18 results. Checking the logs, you see The given user has reached his/her account api limit, please retry after 218 ms..
I raised the limit to 200 requests per second, restarted the management server and tried again. This time I got 143 results and no log messages about the user being throttled.
This increases and uses a default 15mins timeout for VR scripts and for
KVM agent increases timeout from 60s to 5mins. The timeout can
specifically occur when keystore does not get enough entropy from CPU
and script gets killed due to timeout. This is a very specific corner
case and generally should not happen on baremetal/prod environment, but
sometimes seen in nested/test environments.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Remove some unused Classes
These classes were deleted because they have no references in our code base. They are not in Spring execution flow nor instantiated with "new":
- com.cloud.agent.api.CheckStateAnswer
- com.cloud.agent.api.StartupVMMAgentCommand
- com.cloud.agent.api.routing.UserDataCommand
- remove from description at
com.cloud.configuration.Config.ExecuteInSequenceNetworkElementCommands
enum
- com.cloud.agent.api.storage.UpgradeDiskCommand
- com.cloud.agent.api.storage.CreatePrivateTemplateCommand
- com.cloud.agent.api.storage.DestroyAnswer
- Note: "FIXME: Should have an DestroyAnswer" at
com.cloud.storage.resource.StoragePoolResource
- com.cloud.agent.api.storage.UpgradeDiskAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityCommand
- com.cloud.exception.UsageServerException
- com.cloud.info.SecStorageVmLoadInfo
- com.cloud.serializer.SerializerHelper
* PR#1448 update description of 'execute.in.sequence.network.element.commands' param
Update description of 'execute.in.sequence.network.element.commands'parameter to reflect an unused command that has been removed. The removed class command is 'UserDataCommand'.
* Add cloud schema to update SQL
Prevents errors while migrating VM from ISO:
Test 1: Deploy VM from ISO -> Live migrate VM to another host -> ERROR
Test 2: Register ISO using Direct Download on KVM -> Deploy VM from ISO -> Live migrate VM to another host -> ERROR
- Prevent NullPointerException migrating VM from ISO
- Prevent mount secondary storage on ISO direct downloads on KVM
Rohit Yadav
Spaceman1984
andrijapanicsb
Nicolas Vazquez
Abhishek Kumar
Wei Zhou
Abhishek Kumar
Anurag Awasthi
Paul Angus
Dennis Konrad
Gabriel Beims Bräscher
Frank Maximus
Gabriel Beims Bräscher
Nathan Johnson
dahn
Craig Squire
Rohit Yadav