* Add jQuery ui stylings to the project
* Adapt stylings to jquery ui stylings
- remove unnecessary (empty) style definitions
* Check if jquery autocomplete is initialized before destroying it
* Use dialog modal option instead of setting z-index styling
- set minimum heigth of dialog
* Swap removeAttr() for prop() since it's not longer recommended as of jQuery 3.0
* Fix reccuring snapshots modal view
* Further style improvements
* More improvements on the instance-wizard (and multi-wizard in general)
* Raise input hints over modal z-index
* Adapt/fix stylings
- center buttons of create form modals
- fix width of select menu in service offerings
- fix width of modal in Network -> VPC -> configure -> static NAT -> aquire new Ip -> enable static nat
* Adapt width of dynamic-input container
Hide multiselectaction buttons when selection is resetted after a action is performed
Use checked prop instead of attr to show/hide triggered selection when box was clicked by a user before.
How to reproduce:
Select one entry in a multiSelect listView (e.g. instance list) and then deselect it again. Now click on the "select all" checkbox. The entries which were clicked previously are not displayed as selected.
Select at least one entry. Use the multiSelectAction buttons to trigger an action. Wait for completion. The list refreshes and no entry is selected but the multiSelectAction buttons are displayed.
Fix:
Use "checked" property instead of the attribute to select all entries. This is necessary because when you checked an entry by clicking on it the property gets set and the browser is preferably using this. So setting the attribute by clicking on the "select all" checkbox had no impact anymore on the checkBox of the previously clicked entries.
Hide the multiSelectAction buttons when the list is refreshed after an action is performed and no element is selected anymore.
* Update jquery, jquery ui, jquery validate and flot to current versions
update jquery to 3.3.1
update jqueryui to 1.12.1
update jquery validate to 1.17.0
update jquery flot to 0.8.3
* Replace deprecated removed jquery functions
* Fix initial tab content loading in detailView
* Fix logout for new jquery version
* Fix tooltip detail displaying for new JQuery version
* Fix view all trigger in detailView for new JQuery version
* Fix breadcrumb click event handler for JQuery update
* Fix displaying of preselected zone in instanceWizard for new jQuery verion
In the UI, when a user navigates to a screen that displays a table of data and hovers the mouse over a sortable column header, the cursor does not change to a hand pointer, indicating to the user that it can be clicked on, in order to sort the table's data rows according to that column.
When the mouse hovers over the non-sortable 'Quickview' column header, it incorrectly displays a hand pointer cursor instead of a default cursor.
When the mouse hovers over a column header, it also does not display the column header's value as a tooltip.
Expected Behaviour:
The cursor type for a sortable column header must display a hand pointer.
The cursor type for the non-sortable 'Quickview' column header must display a default pointer.
When the mouse hovers over a column header it must display the column header's value as a tooltip.
Actual Behaviour:
The cursor type for a sortable column header incorrectly displays a default pointer.
The cursor type for the non-sortable 'Quickview' column header incorrectly displays a hand pointer.
When the mouse hovers over a column header it does not display the column header's value as a tooltip.
To Reproduce:
In the UI, navigate to a screen that displays a table of data and hover the mouse over a sortable column header, the cursor does not change to a hand pointer.
Hover the mouse over the non-sortable 'Quickview' column header and notice that it incorrectly displays a hand pointer cursor instead of a default cursor.
Hover the mouse over a column header and notice that it does not display the column header's value as a tooltip.
* [CLOUDSTACK-9261] Upgrate jQuery-UI to 1.11 (JQuery UI 1.8.4 prone to XSS)
* fix problems in the UI for lbCertificatePolicy and StaticNAT
* force jenkins build
* Fix about dialog
* Fix position of network service offering
The ACL rules editing/addition page is not user-friendly. Users are not able to see in a single view all of the detail of the ACL rule (they need to use a scroll bar on the horizontal). The problem becomes worse when there are a considerable number of rules. Therefore, we are proposing the following changes:
1- Instead of using the table to create new ACL, we can create a button like the one presented in attached pictures, where users can click, and then a modal popup would appear and users would be able to create the new ACL there. This is similar to the workings of the ACL edit button.
2 - Remove the ability to add new ACL via table where they are presented. All ACLs should be entered via the “New ACL” button. Therefore, the section “Add ACL” would be removed as well;
3 - Move the action section of the list ACL table to the most left position;
These changes would reduce the information in the table and facilitate users to add new rules and easily edit them as well.
This extends work presented on #2048 on which the ability to extend the management range is provided.
Aim
This PR allows separating the management network subnet on which SSVM and CPVM are from the virtual routers management subnet.
Detailed use case
PCI compliance requires that network elements are defined as ‘in scope’ or ‘out of scope’, for compliance purposes. The SSVM and CPVM are both in scope as they allow public HTTP or HTTPS connections. The virtual routers have been defined as out of scope as they have been placed entirely in a firewalled network's segment. However, all of the system VM types share management network. As SSVM and CPVM are both in scope this would bring the virtual routers into scope as well, requiring individual audits of every virtual router. As this is not practical, the ‘management network’ which the SSVM and CPVM are on, and the management network which the virtual routers are on, must be separated by a firewall.
Description
By this feature it is possible to dedicate a created range for SSVM and CPVM (system vms) and provide a VLAN ID for its range.
A new boolean global configuration is added: system.vm.management.ip.reservation.mode.strictness. If enabled, the use of System VMs management IP reservation is strict, preferred if not. Default value is false (preferred).
Strict reservation: System VMs should try to get a private IP from a range marked for system vms. If not available, deployment fails
Preferred reservation: System VMS will try to get a private IP from a range marked for system vms. If not available, IP for range not marked for system vms is taken.
- Several systemvmtemplate optimizations
- Uses new macchinina template for running smoke tests
- Switch to latest Debian 9.3.0 release for systemvmtemplate
- Introduce a new `get_test_template` that uses tiny test template
such as macchinina as defined test_data.py
- rVR related fixes and improvements
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes timezone issue where dates show up as nvalid in UI
- Introduces new event timeline listing/filtering of events
- Several UI improvements to add columns in list views
- Bulk operations support in instance list view to shutdown and destroy
multiple-selected VMs (limitation: after operation, redundant entries
may show up in the list view, refreshing VM list view fixes that)
- Align table thead/tbody to avoid splitting of tables
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows changing permission for existing role permissions, as those were static and could not be changed once created. It also provides the ability to change these permissions in the UI using a drop down menu for each permission rule, in which admin can select ‘Allow’ or ‘Deny’ permission.
Changes in the API:
This feature modifies behaviour of updateRolePermission API method:
New optional parameters ‘ruleid’ and ‘permission’ are introduced, they are mutual exclusive to ‘ruleorder’ parameter. This defines two use cases:
Update role permission: ‘ruleid’ and ‘permission’ parameters needed
Update rules order: ‘ruleorder’ parameter needed
Parameter ‘ruleorder’ is now optional
updateRolePermission providing ‘ruleorder’ parameter should be sent via POST
This improves the metrics view feature by improving the rendering performance
of metrics view tables, by reimplementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9194: Making the console popup window resizable in IE to make sure the focus is not losthttps://issues.apache.org/jira/browse/CLOUDSTACK-9194
To test:
Open any VM console in IE, and try resizing the browser window of console
It should be resizable.
* pr/1270:
CLOUDSTACK-9194: Making the console popup window resizable in IE to make sure the focus is not lost.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Quota service while allowing for scalability will make sure that the cloud is
not exploited by attacks, careless use and program errors. To address this
problem, we propose to employ a quota-enforcement service that allows resource
usage within certain bounds as defined by policies and available quotas for
various entities. Quota service extends the functionality of usage server to
provide a measurement for the resources used by the accounts and domains using a
common unit referred to as cloud currency in this document. It can be configured
to ensure that your usage won’t exceed the budget allocated to accounts/domain
in cloud currency. It will let user know how much of the cloud resources he is
using. It will help the cloud admins, if they want, to ensure that a user does
not go beyond his allocated quota. Per usage cycle if a account is found to be
exceeding its quota then it is locked. Locking an account means that it will not
be able to initiat e a new resource allocation request, whether it is more
storage or an additional ip. Needless to say quota service as well as any action
on the account is configurable.
Changes from Github code review:
- Added marvin test for quota plugin API
- removed unused commented code
- debug messages in debug enabled check
- checks for nulls, fixed access to member variables and feature
- changes based on PR comments
- unit tests for UsageTypes
- unit tests for all Cmd classes
- unit tests for all service and manager impls
- try-catch-finally or try-with-resource in dao impls for failsafe db switching
- remove dead code
- add missing quota calculation case (regression fixed)
- replace tabs with spaces in pom.xmls
- quota: though default value for quota_calculated is 0, the usage server
makes it null while entering usage entries. Flipping the condition so
as to acocunt for that.
- quotatypes: fix NPE in quota type
- quota framework test fixes
- made statement period configurable
- changed default email templates to reflect the fact that exhausted quota may not result in a locked account
- added quotaUpdateCmd that refreshes quota balances and sends alerts and statements
- report quotaSummary command returns quota balance, quota usage and state for all account
- made UI framework changes to allow for text area input in edit views
- process usage entries that have greater than 0 usage
- orocess quota entries only if tariff is non zero
- if there are credit entries but no balance entry create a dummy balance entry
- remove any credit entries that are before the last balance entry
when displaying balance statement
- on a rerun the last balance is now getting added
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Quota+Service+-+FS
PR: https://github.com/apache/cloudstack/pull/768
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.6:
Fix event UUIDS missing on event bus
Add select template dropdown when reinstall VM
CLOUDSTACK-9068: Listing Port Forwarding Rules take too much time to load
Implements various metrics views based on a listView based widget that has following
properties:
- vertically and horizontally scrollable with pagination/infinite scrolling
- sortable columns (client side)
- groupable/collapsible columns
- alternate row coloring
- refresh button to refresh views
- threshold table cell coloring
- panel/breadcrumb navigation
- quick view action column
- translatable labels
- sorts after metrics is refreshed, if a column was previously sorted
- sorts after adding rows on infinite scrolling if a column was pre-sorted
- Metrics views: Zones, Clusters, Hosts, Instances, Storage pools, Volumes
- Resource filtering/navigation: Zones->Clusters->Hosts->Instances->Volumes,
Storage Pool->Volumes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Implements following in listView that generates tabular views;
- Collapsible columns in case of multi-header groupable columns
- Implements threshold coloring of cells in table
- Implements option to render a table that is scrollable in both x-y directions
- Support to only display status icon instead of label if compact is set to true
- Fixes quick-view alignment issue on Safari
- If a column was previously sorted, sorts after adding new rows
- If a supercolumn was collapsed, hides cell after adding new rows
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Implements sorting for tables across CloudStack UI;
- General alphabetic/string based sorting
- Numeric sorting for columns if data appears numeric
- Special sorting comparator for state columns
- Avoids sorting quick view columns and other specific columns
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Adds a new method to cloudBrowser that can remove the last panel and link/ref
from the breadcrumb
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
For setting the width of each data item for each row of Port Forwarding rules, it was processing all rules.
Basically for each data item, it was searching in all rules, which is un-necessary.
If there are N-Rules, It was processing N-times.
Now, it only processes one time by taking all N-rules at a time.
The previous solution was of O(NxN). Now its changed to O(N).
- l10n for the SSH Key Pairs behavior
- l10n for Autoscaling / LB sections
- l10n for Reset password
- l10n on some strings for the installation Wizard
- l10n on some strings in VPN/VPC section
- l10n on Service offerings sections
- improve some FR translations
Introduces a boolean option in UI plugins setting it to 'true' would display
the UI plugin on the left navigation bar.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#563
Nico Wohlfarth
Philipp Bankonier
Henko
Rafael Weingärtner
Rohit Yadav
ernjvr
Nicolas Vazquez
Sigert Goeminne
rashmidixit
Rajani Karuturi
Sanket Thite
Will Stevens
Nitin Kumar Maharana
Remi Bergsma
Anshul Gangwar
Abhinandan Prateek
Milamber
Kevin Dierkx
Rajani Karuturi
Brian Federle
ramamurtis
Jessica Wang