CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP pluginSupport for underlay features (Source & Static NAT to underlay) with Nuage VSP SDN Plugin including Marvin test coverage for corresponding Source & Static NAT features on master. Moreover, our Marvin tests are written in such a way that they can validate our supported feature set with both Nuage VSP SDN platform's overlay and underlay infra.
PR contents:
1) Support for Source NAT to underlay feature on master with Nuage VSP SDN Plugin.
2) Support for Static NAT to underlay feature on master with Nuage VSP SDN Plugin.
3) Marvin test coverage for Source & Static NAT to underlay on master with Nuage VSP SDN Plugin.
4) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
5) PEP8 & PyFlakes compliance with our Marvin test code.
* pr/1580:
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP plugin
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Marvin tests for Source NAT and Static NAT features verification with NuageVsp (both overlay and underlay infra).
Co-Authored-By: Prashanth Manthena <prashanth.manthena@nuagenetworks.net>, Frank Maximus <frank.maximus@nuagenetworks.net>
CLOUDSTACK-9561 After domain/account deletion, snapshot taken by the
domain/account remains undeleted
While deleting the UserAccount Cleanup for the removed VMs/volumes are not
happening. For the removed VMs, snapshots doesn't get cleaned. Only for running
VMs(volumes in ready state) the cleanup happens.
When the VM is desroyed, the volume is marked as destroyed and later storage
garbage collector perform the cleanup. But if we try delete domain/account
before storage garbage collector runs, then it fails.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
KVM hosts on shared storage failure was accepted by mgmt server with the
host state as Up, even though there was no primary/shared storage available on
it. This patch offers a quick fix by throwing an exception in the storage monitor
which connects storage pool on host. The failure is trapped by agent manager
that disconnects the agent without any investigation.
Based on Lab tests, KVM agent may take upto 2 minutes to attempt NFS mount when
the storage is inaccessible (firewalled, or shutdown) before returning back with
an error. It is safe to assume that this won't add pressure on mgmt server due to
several reconnection attempts, and KVM agent would retry reconnection every 2
minutes.
For such KVM hosts, where failure happens due to storage issues; they will be
briefly put in Alert state but will be mostly be in Connecting state during which
the KVM host attempts to mount/reconfigure NFS storage pool.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
Conflicts:
engine/schema/src/com/cloud/upgrade/DatabaseUpgradeChecker.java
engine/schema/test/com/cloud/upgrade/DatabaseUpgradeCheckerTest.java
tools/marvin/setup.py
This fixes class names to make things consistent as per the 4.9 PR on master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Renames schema-490to491*.sql to schema490to4910*.sql
* Renames the Upgrade490to491 class to Upgrade490to4910
* Removes the unused s_logger contant from Upgrade490to4910
* Updates the version in tools/marvin/setup to 4.9.1.0-SNAPSHOT
Updating pom.xml version numbers for release 4.8.2.0-SNAPSHOTOften, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: John Burwell <meaux@cockamamy.net>
/cc @rhtyd @karuturi
* pr/1654:
Adds support for four position versions and optional db upgrades
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In the 4.1.0-4.2.0 db upgrade path, it creates new tables to store secondary
(nfs) storage in image_store table and volumes in volume_store_ref table. In
the upgrade path, it first tries to migrate NFS storage pool where it excludes
storage pools which have been removed, but it migrates all the volumes without
checking if their storage pools have been removed. This causes fk constraint
failure as the volume/row being inserted refers to a storage pool which does
not exist in the image_store table.
The fix migrates all the nfs storage pools to image_store including removed
storage pools and in doing so migrates with the 'removed' field. This fixes
db upgrade for old pre-4.0 and 4.0/4.1 CloudStack clouds.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[4.9/LTS] Add upgrade path from 4.9.0 to 4.9.1, change version to 4.9.1.0-SNAPSHOTThis adds db upgrade path from 4.9.0 to 4.9.1 and fixes a typo in default user role description (CLOUDSTACK-9449)
/cc @karuturi @jburwell -- this will cause issues when fwd-merged to master, I can do the fwd-merging if you would like to avoid fixing the conflicts yourself
@blueorangutan package
* pr/1646:
Updating pom.xml version numbers for release 4.9.1.0-SNAPSHOT
cloudstack: upgrade path from 4.9.0 to 4.9.1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Adds db upgrade path from 4.9.0 to 4.9.1
- CLOUDSTACK-9449: Fix typo in default user role description
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Adds role_id column to cloud_usage.account, fixes UsageDaoImpl to insert
Accounts with role_id from account table.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9238: Fix URL length to 2048 for all url fields in VOI will update the PR to add max field length in the API commands too
* pr/1567:
API: update url field max length
not needed on host table
Fix URL length to 2048 for all url fields in VO
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Rohit Yadav
Nick Livens
Eric Waegeman
Syed
Sudharma Jain
Nemo
nvazquez
nvazquez
Rajani Karuturi
Mike Tutkowski
Bharat Kumar
Nathan Johnson
John Burwell
Abhinandan Prateek
Will Stevens
Marc-Aurèle Brothier