The bus type to `data disk` volumes is hardcoded to `virtio` or `scsi`, when using virtio-scsi (or, based on the template type). Therefore, there is no way to specify the bus type to data disk volumes (as we have for root disks).
This PR intends to replicate the `rootDiskController` behavior to `dataDiskController`, allowing the definition of the controller.
Co-authored-by: Daniel Augusto Veronezi Salvador <daniel@scclouds.com.br>
Add RBD main storage through UI, it will fail when there is no host port parameter;
Because when we created the pool, we did not add the port target in the xml
This fixes issue introduced in c3554ec31d
which enable block of code that will double escape rados host/monitor
port.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR fixes a regression issue in #4497
In cloudstack 4.14 or before, the cpu topology is set only when cpucore per socket is set (to 4 or 6).
in other conditions, there is no cpu topology in vm xml definition.
with #4497, vm will have cpu topology in its xml definition, if cpucore per socket is not set.
<topology sockets='<vm cpu cores>' cores='1' threads='1'/>
Not sure if it causes any issue. I think it would be better not to add this part in vm xml definition if cpucore per socket is not set.
Added property to agent.properties that enables or disables the iscsi session clean up feature. #4210
Added a condition to prevent disk partitions from being cleaned up. #4216
This is an extention of #3732 for kvm.
This is restricted to ovs > 2.9.2
Since Xen uses ovs 2.6, pvlan is unsupported.
This also fixes issues of vms on the same pvlan unable to communicate if they're on the same host
* DB : Add support for MySQL 8
- Splits commands to create user and grant access on database, the old
statement is no longer supported by MySQL 8.x
- `NO_AUTO_CREATE_USER` is no longer supported by MySQL 8.x so remove
that from db.properties conn parameters
For mysql-server 8.x setup the following changes were added/tested to
make it work with CloudStack in /etc/mysql/mysql.conf.d/mysqld.cnf and
then restart the mysql-server process:
server_id = 1
sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION,ERROR_FOR_DIVISION_BY_ZERO,NO_ZERO_DATE,NO_ZERO_IN_DATE,NO_ENGINE_SUBSTITUTION"
innodb_rollback_on_timeout=1
innodb_lock_wait_timeout=600
max_connections=1000
log-bin=mysql-bin
binlog-format = 'ROW'
default-authentication-plugin=mysql_native_password
Notice the last line above, this is to reset the old password based
authentication used by MySQL 5.x.
Developers can set empty password as follows:
> sudo mysql -u root
ALTER USER 'root'@'localhost' IDENTIFIED BY '';
In libvirt repository, there are two related commits
2019-08-23 13:13 Daniel P. Berrangé ● rpm: don't enable socket activation in upgrade if --listen present
2019-08-22 14:52 Daniel P. Berrangé ● remote: forbid the --listen arg when systemd socket activation
In libvirt.spec.in
/bin/systemctl mask libvirtd.socket >/dev/null 2>&1 || :
/bin/systemctl mask libvirtd-ro.socket >/dev/null 2>&1 || :
/bin/systemctl mask libvirtd-admin.socket >/dev/null 2>&1 || :
/bin/systemctl mask libvirtd-tls.socket >/dev/null 2>&1 || :
/bin/systemctl mask libvirtd-tcp.socket >/dev/null 2>&1 || :
Co-authored-by: Wei Zhou <w.zhou@global.leaseweb.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR adds outputting human readable byte sizes in the management server logs, agent logs, and usage records. A non-dynamic global variable is added (display.human.readable.sizes) to control switching this feature on and off. This setting is sent to the agent on connection and is only read from the database when the management server is started up. The setting is kept in memory by the use of a static field on the NumbersUtil class and is available throughout the codebase.
Instead of seeing things like:
2020-07-23 15:31:58,593 DEBUG [c.c.a.t.Request] (AgentManager-Handler-12:null) (logid:) Seq 8-1863645820801253428: Processing: { Ans: , MgmtId: 52238089807, via: 8, Ver: v1, Flags: 10, [{"com.cloud.agent.api.NetworkUsageAnswer":{"routerName":"r-224-VM","bytesSent":"106496","bytesReceived":"0","result":"true","details":"","wait":"0",}}] }
The KB MB and GB values will be printed out:
2020-07-23 15:31:58,593 DEBUG [c.c.a.t.Request] (AgentManager-Handler-12:null) (logid:) Seq 8-1863645820801253428: Processing: { Ans: , MgmtId: 52238089807, via: 8, Ver: v1, Flags: 10, [{"com.cloud.agent.api.NetworkUsageAnswer":{"routerName":"r-224-VM","bytesSent":"(104.00 KB) 106496","bytesReceived":"(0 bytes) 0","result":"true","details":"","wait":"0",}}] }
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Human+Readable+Byte+sizes
Ceph used to use port 6789 (no need to specify it), but with the messenger v2
from Ceph it switched to port 3300 while 6789 still works.
librados/librbd/libvirt will automatically figure out the ports to use if none is
specified.
Therefor there is no need for CloudStack to explicitely define the port in the XML
passed to Libvirt or Qemu.
Leave blank if no port number has been defined by the user.
When you migrate volume between data stores CS keeps the original UUID and changes the path of the volume.
When volume is not found by the given path the agent throws CloudRuntimeException but it's not catched in LibvirtGetVolumeStatsCommandWrapper.java
* 4.13:
Snapshot deletion issues (#3969)
server: Cannot list affinity group if there are hosts dedicated… (#4025)
server: Search zone-wide storage pool when allocation algothrim is firstfitleastconsumed (#4002)
* Fixes snapshot deletion
* Remove legacy '@Component', it is not necessary in this bean/class.
* Fix log message missing %d and remove snapshot on DB
* Remove "dummy" boolean return statement
* Manage snapshot deletion for KVM + NFS (primary storage)
* checkstyle trailing spaces
* rename options strings to *_OPTION
* Fix typo on deleteSnapshotOnSecondaryStorage and enhance log message
* Move the snapshotDao.remove(snapshotId); (#4006)
* Fix deletesnapshot worflow to handle both snapshots created in primary storage and snapshots backed up to secondary storage
* Fix extra space
* refactor out separate handling methods for secondary and primary (reducing returns)
* return false on unexpected error or log when expected
* != instead of ==
* secondary instead of backup storage
* init to null
* Handle snapshot deletion on primary storage. When primary store ref not found for snapshot do not fail the operation.
* Fix debug levels on log messages
Co-authored-by: GabrielBrascher <gabriel@apache.org>
Co-authored-by: Andrija Panic <45762285+andrijapanicsb@users.noreply.github.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Remove constraint for NFS storage
* Add new property on agent.properties
* Add free disk space on the host prior template download
* Add unit tests for the free space check
* Fix free space check - retrieve avaiable size in bytes
* Update default location for direct download
* Improve the method to retrieve hosts to retry on depending on the destination pool type and scope
* Verify location for temporary download exists before checking free space
* In progress - refactor and extension
* Refactor and fix
* Last fixes and marvin tests
* Remove unused test file
* Improve logging
* Change default path for direct download
* Fix upload certificate
* Fix ISO failure after retry
* Fix metalink filename mismatch error
* Fix iso direct download
* Fix for direct download ISOs on local storage and shared mount point
* Last fix iso
* Fix VM migration with ISO
* Refactor volume migration to remove secondary storage intermediate
* Fix simulator issue
This adds support for JDK11 in CloudStack 4.14+:
- Fixes code to build against JDK11
- Bump to Debian 9 systemvmtemplate with openjdk-11
- Fix Travis to run smoketests against openjdk-11
- Use maven provided jdk11 compatible mysql-connector-java
- Remove old agent init.d scripts
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* [CLOUDSTACK-10408] Fix String.replaceAll() to replace() for better performance
* improve with replace char but string
Co-authored-by: Rohit Yadav <rohit@apache.org>
* * Complete API implementation
* Complete UI integration
* Complete marvin test
* Complete Secondary storage GC background task
* improve UI labels
* slight reword and add another missing description
* improve download message clarity
* Address comments
* multiple fixes and cleanups
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* fix more bugs, let it return ip rule list in another log file
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* fix missing iprule bug
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* add support for ARCHIVE type of object to be linked/setup on secstorage
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Fix retrieving files for Xenserver
* Update get_diagnostics_files.py
* Fix bug where executable scripts weren't handled
* Fixed error on script cmd generation
* Do not filter name for log files as it would override similar prefix script names
* Addressed code review comments
* log error instead of printstacktrace
* Treat script as executable and shell script
* Check missing script name case and write to output instead of catching exception
* Use shell = true instead of shlex to support any executable
* fix xenserver bug
* don't set dir permission for vmware
* Code review comments - refactoring
* Add check for possible NPE
* Remove unused imoprt after rebase
* Add better description for configs
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Rohit Yadav <rohit@apache.org>
Co-authored-by: Anurag Awasthi <anurag.awasthi@shapeblue.com>
* Suqash commits to a single commit and rebase against master
Update marvin tests to use white list
* * Fix marvin test failure
* Add new marvin negative tests cases
* Remove hard-coded hypervisor types in marvin tests
* Fix build error after rebase and add hugepagesless
* Fix readability of python code
* Fix failing test
* Adding cleanup of vms for negative tests
* Bug fixes - change config checks properly and block extraconfig in details
* Trim to compare the keys
* CR comments
* Don't skip extraconfig without exception
Co-authored-by: Boris Stoyanov - a.k.a Bobby <bss.stoyanov@gmail.com>
* Avgload (#2)
* Adding avgload for kvm
* Fix coding style issue
* Add getter/setter
* Fix several small errors
* Add override
* Uncomment getAverageLoad
* Override getAverageLoad()
* Checkstyle bug?
* Delete trailing spaces
* Renaming function
* Change interface to match
* Rename method in GetHostStatsAnswer
* Change method call name
* Convert double to long
* Remove trailing whitespace
* Change names around
* Make load visible to return it
* Parse string to double
* Change Long to Double
* Fix getter
* Unify naming to cpuloadaverage
* Change cpuloadaverage String to Double in listHostsMetrics
Remove some unnecessary whitespaces
* Add CPU_LOAD_AVERAGE to ApiConstants
When I add a secondary IP to a nic on shared network in advanced zone with security groups, the network rules for new IP are not applied on KVM hypervisors.
It is because "--action -A" cannot be recognized in security_group.py after commit ac73e7e671. changing to "--action=-A" will fix it.
Fixes issue #3590 by using the last element on the array from the snapshot "path" String for retrieving the snapshot id. Additionally, it uses the volumePath as the volume id which should always be the correct value. The error raised on issue #3590 was related to the wrong use of variable "path" where in some cases had a different set of substrings.
The proposed change has been tested and evaluated. The values used for openning the RBD connection and executing the rollback were stable on the tests. Runned rollback on multiple snapshots and could start the VM with the content matching the ROOT reverted snapshot.
KVM is supported on arm64 Linux (https://www.linux-kvm.org/page/Processor_support#ARM:).
For a small (IoT) platform such as the new Raspberry Pi 4 that uses armv8 processor
(cortex-a72) it's possible to run Linux host with `/dev/kvm`
accleration. This adds support for IoT IaaS in CloudStack.
This PR is from a fun weekend project where:
- I set up a Raspberry Pi 4 - 4GB RAM model with 4 CPU cores @ 1.5Ghz, 128GB SD samsung evo plus card
- Installed Ubuntu 19.10 raspi3 base image: http://cdimage.ubuntu.com/releases/19.10/release/ubuntu-19.10-preinstalled-server-arm64+raspi3.img.xz
- Build a custom Linux 5.3 kernel with KVM enabled, deb here: http://dl.rohityadav.cloud/cloudstack-rpi/kernel-19.10/ and install the linux-image and linux-module
- Then install/setup CloudStack on it (fix some issues around jna, by manually installing newer libjna-java to /usr/share/cloudstack-agent/lib)
- Since the host processor is not x86_64, I had to build a new arm64 (or aarch64) systemvmtemplate: http://dl.rohityadav.cloud/cloudstack-rpi/systemvmtemplate/
I could finally get a 4.13 CloudStack + Adv zone/networking to run on it
and deployed a KVM based Ubuntu 19.10 environment and NFS storage.
Deployed a test vm with isolated network, VR works as expected. Console
proxy works as well, for this tested against arm64 openstack Debian 9/10
templates.
I raised the issue of enabling KVM in upstream Ubuntu arm64 build: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1783961
Ubuntu kernel team has come back and future arm64 releases may have
KVM enabled by default.
Limitation: on my aarch64 env, it did not support IDE, therefore all
default bus type for volumes are SCSI by default. With VIRTIO it fails
sometimes.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* kvm: Use 'ip' instead of 'brctl'
The command 'brctl' is deprecated and should no longer be used.
iproute2 supports all the features we need and therefor we should use
this instead of the old commands.
Feature wise this does not change anything. It just makes the code more
robust towards the future.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* kvm/modifyvlan: Use 'ip' instead of 'brctl'
brctl is deprecated and by using iproute2 we are future-proof
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Fix regression bug that affects KVM local storage migration. Some of the desired execution flows for KVM local storage migration had been altered to allow only managed storage to execute. Fixed allowing managed and non managed storages to execute.
Fixes#3521
There are certain scenarios where the 169.254.0.0/16 subnet is used for different
purposes then CloudStack on a hypervisor.
Once of such scenarios is a BGP+EVPN+VXLAN setup using BGP Unnumbered where the
169.254.0.1 address is used by Frr/Zebra BGP routing to send traffic to the
neighboring router.
The following settings can be changed in the agent.properties (default values added):
control.cidr=169.254.0.0/16
Make sure the global setting 'control.cidr' matches the values defined in the agent.propeties!
In the future the mgmt server can send this parameter to a KVM Agent on startup, but at the moment
this framework is not in place and thus these values can't be send to the Agent in a proper manner.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently when refreshing disk usage stats all kvm agents are asked to collect stats for all volumes. In setups with multiple kvm hosts where managed storage is used, not all volumes are attached to all kvm hosts, this results in a large number of warnings in the kvm agent logs. This change introduces a filter step in case managed storage is used so that the management server only requests kvm agents for stats about volumes that are connected to each kvm host.
Add CephSnapshotStrategy to handle RBD revert (rollback) snapshot. In order to support RBD revert (rbd_rollback), this PR adds a CephSnapshotStrategy class to handle Ceph/RBD snapshot actions.
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
This change addresses #3089. There was an issue when disks were being added with bus type IDE when creating windows VMs from ISOs. It is not possible to select bus type when creating a VM with an ISO. The bus type is inferred based on the platform emulator string provided to the KVM agent. Currently when creating a VM with managed storage (ex: Solidfire) and OS type string Windows*, all disks are added as IDE. Qemu currently does not support multiple IDE controllers and this configuration results in VMs that cannot be started. This issue does not occur when using NFS as the storage provider due to logic in that KVM agent that makes all data volumes (non root) use a virtio controller for file based disk. Similar logic was added for raw physical disks so that managed storage has the same behavior as NFS. In addition specific versions were removed from the code that guesses the disk controller to be used based on the platform emulator string since most modern operating systems support virtio.
Fixes#3089
Feature Specification: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=95653548
Live storage migration on KVM under these conditions:
From source and destination hosts within the same cluster
From NFS primary storage to NFS cluster-wide primary storage
Source NFS and destination NFS storage mounted on hosts
In order to enable this functionality, database should be updated in order to enable live storage capacibilty for KVM, if previous conditions are met. This is due to existing conflicts between qemu and libvirt versions. This has been tested on CentOS 6 hosts.
Additional notes:
To use this feature set the storage_motion_supported=1 in the hypervisor_capability table for KVM. This is done by default as the feature may not work in some environments, read below.
This feature of online storage+VM migration for KVM will only work with CentOS6 and possible Ubuntu as KVM hosts but not with CentOS7 due to:
https://bugs.centos.org/view.php?id=14026https://bugzilla.redhat.com/show_bug.cgi?id=1219541
On CentOS7 the error we see is: " error: unable to execute QEMU command 'migrate': this feature or command is not currently supported" (reference https://ask.openstack.org/en/question/94186/live-migration-unable-to-execute-qemu-command-migrate/). Reading through various lists looks like the migrate feature with qemu may be available with paid versions of RHEL-EV but not centos7 however this works with CentOS6.
Fix for CentOS 7:
Create repo file on /etc/yum.repos.d/:
[qemu-kvm-rhev]
name=oVirt rebuilds of qemu-kvm-rhev
baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7Server/
mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el7Server
enabled=1
skip_if_unavailable=1
gpgcheck=0
yum install qemu-kvm-common-ev-2.3.0-29.1.el7.x86_64 qemu-kvm-ev-2.3.0-29.1.el7.x86_64 qemu-img-ev-2.3.0-29.1.el7.x86_64
Reboot host
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* DPDK vHost User mode selection
* SQL text field and DPDK classes refactor
* Fix NullPointerException after refactor
* Fix unit test
* Refactor details type
When I use SandyBridge as custom cpu in my testing, vm failed to start due to following error:
```
org.libvirt.LibvirtException: unsupported configuration: guest and host CPU are not compatible: Host CPU does not provide required features: avx, xsave, aes, tsc-deadline, x2apic, pclmuldq
```
With this patch, it works with the following setting in agent.properties:
```
guest.cpu.mode=custom
guest.cpu.model=SandyBridge
guest.cpu.features=-avx -xsave -aes -tsc-deadline -x2apic -pclmuldq
```
vm cpu is defined as below:
```
<cpu mode='custom' match='exact'>
<model fallback='allow'>SandyBridge</model>
<feature policy='disable' name='avx'/>
<feature policy='disable' name='xsave'/>
<feature policy='disable' name='aes'/>
<feature policy='disable' name='tsc-deadline'/>
<feature policy='disable' name='x2apic'/>
<feature policy='disable' name='pclmuldq'/>
</cpu>
```
- Fixes PR #3146 db cleanup to the correct 4.12->4.13 upgrade path
- Fixes failing unit test due to jdk specific changes after forward
merging
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* ubuntu16: fix unable to add host if cloudbrX is not configured
while add a ubuntu16.04 host with native eth0 (cloudbrX is not configured),
the operation failed and I got the following error in /var/log/cloudstack/agent/setup.log
```
DEBUG:root:execute:ifconfig eth0
DEBUG:root:[Errno 2] No such file or directory
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 38, in configration
result = self.config()
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 211, in config
super(networkConfigUbuntu, self).cfgNetwork()
File "/usr/lib/python2.7/dist-packages/cloudutils/serviceConfig.py", line 108, in cfgNetwork
device = self.netcfg.getDefaultNetwork()
File "/usr/lib/python2.7/dist-packages/cloudutils/networkConfig.py", line 53, in getDefaultNetwork
pdi = networkConfig.getDevInfo(dev)
File "/usr/lib/python2.7/dist-packages/cloudutils/networkConfig.py", line 157, in getDevInfo
elif networkConfig.isBridge(dev) or networkConfig.isOvsBridge(dev):
```
The issue is caused by commit 9c7cd8c248
2017-09-19 16:45 Sigert Goeminne ● CLOUDSTACK-10081: CloudUtils getDevInfo function will now return "bridge" instead o
* ubuntu16: Stop service libvirt-bin.socket while add a host
service libvirt-bin.socket will be started when add a ubuntu 16.04 host
DEBUG:root:execute:sudo /usr/sbin/service libvirt-bin start
However, libvirt-bin service will be broken by it after restarting
Stopping service libvirt-bin.socket will fix the issue.
An example is given as below.
```
root@node32:~# /etc/init.d/libvirt-bin restart
[ ok ] Restarting libvirt-bin (via systemctl): libvirt-bin.service.
root@node32:~# virsh list
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory
root@node32:~# systemctl stop libvirt-bin.socket
root@node32:~# /etc/init.d/libvirt-bin restart
[ ok ] Restarting libvirt-bin (via systemctl): libvirt-bin.service.
root@node32:~# virsh list
Id Name State
----------------------------------------------------
```
* ubuntu16: Diable libvirt default network
By default, libvirt will create default network virbr0 on kvm hypervisors.
If vm uses the same ip range 192.168.122.0/24, there will be some issues.
In some cases, if we run tcpdump inside vm, we will see the ip of kvm hypervisor as source ip.
* Keep iotune section in the VM's XML after live migration
When live migrating a KVM VM among local storages, the VM loses the
<iotune> section on its XML, therefore, having no IO limitations.
This commit removes the piece of code that deletes the <iotune> section
in the XML.
* Add test for replaceStorage in LibvirtMigrateCommandWrapper
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Fix Javadoc for method replaceIpForVNCInDescFile
* feature: add libvirt / qemu io bursting
Adds the ability to set bursting features from libvirt / qemu
This allows you to utilize the iops and bytes temporary "burst" mode
introduced with libvirt 2.4 and improved upon with libvirt 2.6.
https://blogs.igalia.com/berto/2016/05/24/io-bursts-with-qemu-2-6/
* updates per rafael et al
The KVM Agent had two mechanisms for reporting its capabilities
and memory to the Management Server.
On startup it would ask libvirt the amount of Memory the Host has
and subtract and add the reserved and overcommit memory.
When the HostStats were however reported to the Management Server
these two configured values on the Agent were no longer reported
in the statistics thus showing all the available memory in the
Agent/Host to the Management Server.
This commit unifies this by using the same logic on Agent Startup
and during statistics reporting.
memory=3069636608, reservedMemory=1073741824
This was reported by a 4GB Hypervisor with this setting:
host.reserved.mem.mb=1024
The GUI (thus API) would then show:
Memory Total 2.86 GB
This way the Agent properly 'lies' to the Management Server about its
capabilities in terms of Memory.
This is very helpful if you want to overprovision or undercommit machines
for various reasons.
Overcommitting can be done when KSM or ZSwap or a fast SWAP device is
installed in the machine.
Underprovisioning is done when the Host might run other tasks then a KVM
hypervisor, for example when it runs in a hyperconverged setup with Ceph.
In addition internally many values have been changed from a Double to a Long
and also store the amount of bytes instead of Kilobytes.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Replace deprecated optparse by argparse
Starting with Python 2.7 the library optparse has been replaced by
argpase.
This commit replaces the use of optparse by argparse
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Remove LXC support from security_group.py
LXC does not work and has been partially removed from CloudStack already
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Refactor libvirt code
Use a single function which properly throws an Exception when the
connection to libvirt fails.
Also simplify some logic, make it PEP-8 compatible and remove a unused
function from the code.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Raise Exception on execute() failure
If the executed command exists with a non-zero exit status we should
still return the output to the command, but also raise an Exception.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: Use a function to determin the physical device of a bridge
We can not safely assume that the first device listed under a bridge is the
physical device.
With VXLAN isolation a vnet device can be attached to a bridge prior to the
vxlanXXXX device being attached.
We need to filter out those devices and then fetch the physical device attached
to the bridge.
In addition use the 'bridge' command instead of 'brctl'. 'bridge' is part of the
iproute2 utils just like 'ip' and should be considered as the new default.
This command is also available on EL6 and does not break any backwards compat.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: --set is deprecated, use --match-set
These messages are seen in the KVM Agent log:
--set option deprecated, please use --match-set
Functionality does not change
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* security group: PEP-8 and indentation fixes
There were a lot of styling problems in the code:
- Missing whitespace or exess whitespace
- CaMelCaSe function names and variables
- 2-space indentation instead of 4 spaces
This commit addresses those issues.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The additional queues can enhance the performance of the VirtIO SCSI disk
and it is recommended to set this to the amount of vCPUs a Instance is assigned.
The optional queues attribute specifies the number of queues for the
controller. For best performance, it's recommended to specify a value matching
the number of vCPUs. Since 1.0.5 (QEMU and KVM only)
Source: https://libvirt.org/formatdomain.html#elementsVirtio
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* Allow KVM VM live migration with ROOT volume on file
* Allow KVM VM live migration with ROOT volume on file
- Add JUnit tests
* Address reviewers and change some variable names to ease future
implementation (developers can easily guess the name and use
autocomplete)
Added dummy and lo devices to be treated as a normal bridge slave devs.
Fixes#2998
Added two more device names (lo* and dummy*). Implemented tests. Code was refactored.
Improved paths concatenation code from "+" to Paths.get.
If a host has many routes this can be a magnitude faster then printing
all the routes and grepping for the default.
In some situations the host might have a large amount of routes due to
dynamic routing being used like OSPF or BGP.
In addition fix a couple of loglines which were throwing messages on
DEBUG while WARN and ERROR should be used there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
These additional RBD features allow for faster lookups of how much space a RBD
image is using, but with the exclusive locking we prevent two VMs from writing
to the same RBD image at the same time.
These are the default features used by Ceph for any new RBD image.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Since we support only Ubuntu 16.04+ on master/4.12+, we can now use
the libvirt service name `libvirtd` for all distributions. This also
fixes an optional package name for libvirtd installation on Debian 9+.
Fixes#2909
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Windows has support for several paravirt features that it will use when running on Hyper-V, Microsoft's hypervisor. These features are called enlightenments. Many of the features are similar to paravirt functionality that exists with Linux on KVM (virtio, kvmclock, PV EOI, etc.)
Nowadays QEMU/KVM can also enable support for several Hyper-V enlightenments. When enabled, Windows VMs running on KVM will use many of the same paravirt optimizations they would use when running on Hyper-V.
A number of years ago, a PR was introduced that added a good portion of the code to enable this feature set, but it was never completed. This PR enables the existing features. The previous patch set detailed in #1013 also included the tests.
By selecting Windows PV, the enlightenment additions will be applied to the libvirt configuration. This is support on Windows Server 2008 and beyond, so all currently supported versions of Windows Server.
In our testing, we've seen benchmark improvements of around 20-25% running on Centos 7 hosts and it is also supported on Centos/RHEL 6.5 and later. Testing on Ubuntu would be appreciated.
When a Instance is (attempted to be) started in KVM Host the Agent
should not worry about the allocated memory on this host.
To make a proper judgement we need to take more into account:
- Memory Overcommit ratio
- Host reserved memory
- Host overcommit memory
The Management Server has all the information and the DeploymentPlanner
has to make the decision if a Instance should and can be started on a
Host, not the host itself.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This fixes#2763 by moving a post cert-renewal class for kvm
plugin/hypervisor to src/main/java. The regression is due to change
in file-system layout due to maven standard refactoring on master and
issue was not caught during forward-merging of a PR from 4.11 branch.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The three methods are named as "setXXX", actually, they are not simple setter or getter.
They are further renamed as "generateXXX" with dahn's comments.
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
This fixes move refactoring error introduced in #2283
For instance, the class DatadiskTO is supposed to be in com.cloud.agent.api.to package. However, the folder structure it was placed in is com.cloud.agent.api.api.to.
Skip tests for cloud-plugin-hypervisor-ovm3:
For some unknown reason, there are quite a lot of broken test cases for cloud-plugin-hypervisor-ovm3. They might have appeared after some dependency upgrade and was overlooked by the person updating them. I checked them to see if they could be fixed, but these tests are not developed in a clear and clean manner. On top of that, we do not see (at least I) people using OVM3-hypervisor with ACS. Therefore, I decided to skip them.
Identention corrected to use spaces instead of tabs in XML files
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
Daniel Augusto Veronezi Salvador
div8cn
Rohit Yadav
Wei Zhou
Harikrishna Patnala
Daan Hoogland
Sid Kattoju
davidjumani
Spaceman1984
Wido den Hollander
Pearl Dsilva
slavkap
mbrashearnttglobalnet
Gabriel Beims Bräscher
Daan Hoogland
Andrija Panic
Bitworks LLC
pavanaravapalli
Nicolas Vazquez
Radu Todirica
Wei Zhou
Abhishek Kumar
Xia Li
Paul Angus
Anurag Awasthi
Dennis Konrad
Gabriel Beims Bräscher
ustcweizhou
Frank Maximus
dahn
Gabriel Beims Bräscher
Nathan Johnson
Rohit Yadav
Simon Weller
Kui LIU
brett
lzh3636
Rafael Weingärtner
Marc-Aurèle Brothier