CLOUDSTACK-9422: Granular 'vmware.create.full.clone' as Primary Storage setting### Introduction
For VMware, It is possible to decide creating VMs as full clones on ESX HV, adjusting `vmware.create.full.clone` global setting. We would like to introduce this property as a primary storage detail, and use its value instead of global setting's value.
We propose introducing `fullCloneFlag` on `PrimaryDataStoreTO` sent on `CopyCommand`. This way we can reconfigure `VmwareStorageProcessor` and `VmwareStorageSubsystemCommandHandler` similar as it was done for `nfsVersion` but refactoring it to be more general.
* pr/1602:
CLOUDSTACK-9422: Granular VMware vms creation as full clones on HV
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Export UUID for zone creation event completion.Action events have support for exporting their "first class entities" over the event bus, if it's turned on. This works mostly for BaseAsyncCmds and any synchronous command that operates on already-existing entities. They are populated by the ApiServer and found by ActionEventUtils.
Where it tends to falter is when dealing with synchronous creation commands. This commit makes createZone export the zone UUID over the event bus once the zone has been created.
* pr/1661:
Export UUID for zone creation event completion.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
- Simplifies change password transactional logic without using pessmistic locks
- Adds a re-enter password field in the UI to valid ipmi/oobm password
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9180: Optimize concurrent VM deployment operation on same network
Check if VR needs to be allocated for a given network and only acquire lock if required
Refer to the bug for details.
* pr/1251:
CLOUDSTACK-9180: Optimize concurrent VM deployment operation on same network Check if VR needs to be allocated for a given network and only acquire lock if required
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9238: Fix URL length to 2048 for all url fields in VOI will update the PR to add max field length in the API commands too
* pr/1567:
API: update url field max length
not needed on host table
Fix URL length to 2048 for all url fields in VO
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.7:
CLOUDSTACK-9376: Restrict listTemplates API with filter=all for root admin
CLOUDSTACK-9369: Restrict default login to ldap/native users
Add lsb-release dependency to mgmt server and agent on Debian/Ubuntu.
Emit template UUID and class type over event bus when deleting templates.
Emit template UUID and class type over event bus when deleting templatesNew version of #1378 for the 4.7b branch instead of 4.6.
* pr/1564:
Emit template UUID and class type over event bus when deleting templates.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Restricts default login auth handler to ldap and native-cloudstack users
- Refactors and create re-usable method to find domain by id/path
- Adds unit test for refactored method in DomainManagerImpl
- Adds smoke test for login handler
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The behavior is now consistent with template creation. This commit
also adds a unit test for this functionality to make sure that it will
always happen.
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Refactor system VM default network creationTwo small commits which moves the retrieval of the default network for the console proxy and the SSVM into a separate protected method. It's a small change that makes the code more readable/maintainable and also makes the class more suitable for overriding should one want to do this. It's forward-ported from our 4.2 branch.
No new tests since this should not change any functionality, and thus should be covered by the existing unit tests.
Now on the master branch (#1359 was on the wrong branch).
* pr/1360:
Refactor ssvm default network retrieval.
Refactor console proxy default network retrieval.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9203 Implement security group move on updateVM API call cherry-picked from a exoscale internal fix
Conflicts:
api/src/org/apache/cloudstack/api/command/user/vm/UpdateVMCmd.java
server/src/com/cloud/vm/UserVmManager.java
server/src/com/cloud/vm/UserVmManagerImpl.java
* pr/1297:
CLOUDSTACK-9203 refactorred DeployVM code to be used by UpdateVM as well
CLOUDSTACK-9203 security group update on running instance
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9380: fix NPE in listDomains API for a mistakeThe issue happens if volumeTotal is NULL in database.
This is caused by commit 0407fb334f for CLOUDSTACK-7847.
* pr/1550:
CLOUDSTACK-9380: fix NPE in listDomains API for a mistake
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9358: StringIndexOutOfBoundsException on eventsFixes JSON deserialization of `cmdInfo` (current process fails with `StringIndexOutOfBoundsException` when `cmdEventType` is the last parameter in the JSON string).
A `StringIndexOutOfBoundsException` is thrown in some cases during event publication.
Example: a stopVirtualMachine API request is executed, and fails with:
```
2016-04-15 09:24:43,080 ERROR [o.a.c.f.m.MessageDispatcher] (catalina-exec-1:ctx-840cbaa7 ctx-8daf0e9c ctx-f63af073) Unexpected exception when calling com.cloud.api.ApiServer.handleAsyncJobPublishEvent
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor307.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.apache.cloudstack.framework.messagebus.MessageDispatcher.dispatch(MessageDispatcher.java:75)
at org.apache.cloudstack.framework.messagebus.MessageDispatcher.onPublishMessage(MessageDispatcher.java:45)
at org.apache.cloudstack.framework.messagebus.MessageBusBase$SubscriptionNode.notifySubscribers(MessageBusBase.java:441)
at org.apache.cloudstack.framework.messagebus.MessageBusBase.publish(MessageBusBase.java:178)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.publishOnEventBus(AsyncJobManagerImpl.java:1052)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.submitAsyncJob(AsyncJobManagerImpl.java:180)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.submitAsyncJob(AsyncJobManagerImpl.java:168)
at com.cloud.api.ApiServer.queueCommand(ApiServer.java:687)
at com.cloud.api.ApiServer.handleRequest(ApiServer.java:528)
at com.cloud.api.ApiServlet.processRequestInContext(ApiServlet.java:296)
at com.cloud.api.ApiServlet$1.run(ApiServlet.java:127)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext$1.call(DefaultManagedContext.java:56)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext.callWithContext(DefaultManagedContext.java:103)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext.runWithContext(DefaultManagedContext.java:53)
at com.cloud.api.ApiServlet.processRequest(ApiServlet.java:124)
at com.cloud.api.ApiServlet.doGet(ApiServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:620)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:52)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:950)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1040)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1720)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.run(NioEndpoint.java:1679)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -468
at java.lang.String.substring(String.java:1967)
at com.cloud.api.ApiServer.handleAsyncJobPublishEvent(ApiServer.java:270)
at sun.reflect.GeneratedMethodAccessor307.invoke(Unknown Source)
... 41 more
```
The VM is not stopped, and the API returns the following error:
HTTP/1.1 530 : InvocationTargetException when invoking event handler for subject: job.eventpublish
The error comes from JSON parsing in 339355594c/server/src/com/cloud/api/ApiServer.java (L270)
The `substring()` method throws a StringIndexOutOfBoundsException when `cmdEventType` is the last field in the JSON object.
The JSON object being the JSON serialization of a `HashMap` object, the order of the fields is not guaranteed. In my tests, I observed that there is no error with Java 7, but it fails with Java 8, which has a different Hashmap implementation.
For example, with request http://127.0.0.1:8096/client/api?command=stopVirtualMachine&id=734ef752-fe99-4d46-8f31-18130496473c, cmdInfo is:
```
{"ctxUserId":"1","httpmethod":"GET","ctxStartEventId":"105","id":"734ef752-fe99-4d46-8f31-18130496473c","ctxDetails":"{\"interface com.cloud.vm.VirtualMachine\":\"734ef752-fe99-4d46-8f31-18130496473c\"}","ctxAccountId":"1","uuid":"734ef752-fe99-4d46-8f31-18130496473c","cmdEventType":"VM.STOP"}
```
and it fails.
Please note that the error is not present for all API requests, depending on the parameters fields.
* pr/1503:
CLOUDSTACK-9358: StringIndexOutOfBoundsException on events
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices existexternal network device usage monitor thread that runs every 5mins by default (based on global config external.network.stats.interval) and runs coalesce query to acquire a lock. When there are no external devices exist, there is no need to run usage collection.
Added test case to verify that usage collection task is not run when there are no External LB or External FW
* pr/846:
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices exist
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6928: fix issue disk I/O throttling not appliedDisk IO throttling (for KVM) is not applied in the merge of 4.2.
Tests passed:
(1) start vm
(2) attach volume
(3) start vm with volume
(4) migrate vm (with volume)
* pr/1410:
CLOUDSTACK-6928: fix issue disk I/O throttling not applied
Signed-off-by: Will Stevens <williamstevens@gmail.com>
cherry-picked from a exoscale internal fix:
Implement security group move on updateVM API call
Prevent security group update while instance is running
Conflicts:
api/src/org/apache/cloudstack/api/command/user/vm/UpdateVMCmd.java
server/src/com/cloud/vm/UserVmManager.java
server/src/com/cloud/vm/UserVmManagerImpl.java
CLOUDSTACK-9365 : updateVirtualMachine with userdata should not error when a VM is attached to multiple networks from which one or more doesn't support userdata
* pr/1523:
Marvin script for cloudstack-9365
CLOUDSTACK-9365 : updateVirtualMachine with userdata should not error when a VM is attached to multiple networks from which one or more doesn't support userdata
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignoredDisable and Remove Host operation disables the primary storage capacity.
Steps to replicate:
Base Condition: There exists a host and storage pool with same id
Steps:
1. Find a host and storage pool having same id
2. Disable the host
3. CPU(1) and MEMORY(0) capacity in op_host_capacity for above host is disabled
4. STORAGE(3) capacity in op_host_capacity for storage pool with id same as above host is also disabled
RCA:
'host_id' column in 'op_host_capacity' table used for storing both storage pool id (for STORAGE capacity) and host id (MEMORY and CPU). While disabling a HOST we also disable the capacity associated with host.
Ideally while disabling capacity we should only disable MEMORY and CPU capacity, but we are not doing so.
Code Path:
ResourceManagerImpl.doDeleteHost() -> ResourceManagerImpl.resourceStateTransitTo() -> CapacityDaoImpl.updateCapacityState(null, null, null, host.getId(), capacityState.toString())
updateCapacityState is updating disabling all entries which matches the host_id. This will also disable a entry having storage pool id same as that of host id.
Changes:
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Test Result:
```
Before Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
9 rows in set (0.00 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Disabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
After Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.01 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.00 sec)
Sudhansus-MAC:cloudstack sudhansu$ nosetests-2.7 --with-marvin --marvin-config=setup/dev/advanced.cfg test/integration/component/maint/test_capacity_host_delete.py
==== Marvin Init Started ====
=== Marvin Parse Config Successful ===
=== Marvin Setting TestData Successful===
==== Log Folder Path: /tmp//MarvinLogs//Apr_22_2016_22_42_27_X4VBWD. All logs will be available here ====
=== Marvin Init Logging Successful===
==== Marvin Init Successful ====
===final results are now copied to: /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB===
Sudhansus-MAC:cloudstack sudhansu$ cat /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB/results.txt
test_01_op_host_capacity_disable_host (integration.component.maint.test_capacity_host_delete.TestHosts) ... === TestName: test_01_op_host_capacity_disable_host | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 0.168s
OK
```
* pr/1516:
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Added conditions to ensure the capacity_type is added only when capacity_type length is greater than 0.
Added checks in marvin test to ensure the capacity exists for a host before disabling it.
Added checks to avoid index out of range exception
* 4.7:
Fix Sync of template.properties in Swift
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
Fix Sync of template.properties in SwiftWhen using Swift as a secondary storage, we create a template.properties file which stores the metadata about the template. Currently the data which is present in the file is incorrect which leads to templates becoming unavailable after they are downloaded. This fix makes sure that the template.properties has the correct "path" set so that templates are available.
I've also done a bit of cleanup and made the code bit more clean.
* pr/1331:
Fix Sync of template.properties in Swift
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It defaults to 1, which is hardcoded in the template:
./cosmic/cosmic-core/systemvm/patches/debian/config/opt/cloud/templates/keepalived.conf.templ
As non-VPC redundant routers use this setting, I think it makes sense to use it for rVPCs as well.
We also need a change to pickup the cmd_line parameter and use it in the Python code that configures the router.
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
This PR addresses the following JIRA ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-8813
The problem is that there needs to be notifications sent when a host is added to, about to be removed from, and removed from a cluster.
Such notifications can be used for many purposes. For example, it can allow storage plug-ins to update ACLs on their storage systems. Also, it can allow us to clean up IQNs from ESXi hosts that are no longer needed.
* pr/816:
CLOUDSTACK-8813: Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9299: Out-of-band Management for CloudStackSupport access to a hosts out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature, please install `ipmitool` (using yum/apt/brew) and `ipmisim`:
https://pypi.python.org/pypi/ipmisim
The default ipmitool location is assumed in /usr/bin, if this is different in your env please fix the global setting, see FS for details on various global settings.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
/cc @jburwell @swill @abhinandanprateek @murali-reddy @borisstoyanov
* pr/1502:
maven: ignore utils/testsmallfileinactive for rat checking
CLOUDSTACK-9378: Fix for #1497
HypervisorUtilsTest: increate timeout to 8seconds
travis: Use patched version of ipmitool for tests
CLOUDSTACK-9299: Out-of-band Management for CloudStack
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
* 4.7:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
Handle private gateways more reliably
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Add private gateway IP to router initialization config
apply static routes on change to master state
Handle private gateways more reliablyWhen initialising a VPC router we need to know which IP/device corresponds to a private gateway. This is to solve a problem when stop/starting a VPC router (which gets the private gateway config as a guest network and as a result breaks the functionality). You read it right, the private gateway is sent as type=guest after reboot and type=public initially.
Before this change, you could add a private gw to a running router but you couldn't restart it (it would mix up the tiers). Now the private gateway is detected properly and it works just fine.
Booting without private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.0.42",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "None",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
Booting with private gateway:
```
root@r-167-VM:~# cat /etc/cloudstack/cmdline.json
{
"config": {
"baremetalnotificationapikey": "V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw",
"baremetalnotificationsecuritykey": "OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w",
"disable_rp_filter": "true",
"dns1": "8.8.8.8",
"domain": "cs2cloud",
"eth0ip": "169.254.2.227",
"eth0mask": "255.255.0.0",
"host": "192.168.22.61",
"name": "r-167-VM",
"port": "8080",
"privategateway": "10.201.10.1",
"redundant_router": "false",
"template": "domP",
"type": "vpcrouter",
"vpccidr": "10.0.0.0/24"
},
"id": "cmdline"
```
And:
```
cat cmdline
vpccidr=10.0.0.0/24 domain=cs2cloud dns1=8.8.8.8 privategateway=10.201.10.1 template=domP name=r-167-VM eth0ip=169.254.2.227 eth0mask=255.255.0.0 type=vpcrouter disable_rp_filter=true baremetalnotificationsecuritykey=OXI16srCrxFBi-xOtEwcYqwLlMfSFTlTg66YHtXBBqR7HNN1us3HP5zWOKxfVmz4a3C1kUNLPrUH13gNmZlu4w baremetalnotificationapikey=V2l1u3wKJVan01h8kq63-5Y5Ia3VLEW1v_Z6i-31QIRJXlt5vkqaqf6DVcdK0jP3u79SW6X9pqJSLSwQP2c2Rw host=192.168.22.61 port=8080
```
Logs:
```
2016-02-24 20:08:45,723 DEBUG [c.c.n.r.VpcVirtualNetworkApplianceManagerImpl] (Work-Job-Executor-4:ctx-458d4c52 job-1402/job-1403 ctx-d5355fca) (logid:5772906c) Set privategateway field in cmd_line.json to 10.201.10.1
```
* pr/1474:
Handle private gateways more reliably
Add private gateway IP to router initialization config
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9287 - Fix unique mac address per rVPC routerThis is work by @wilderrodrigues, see PR #1413 It contains important fixes and I think it needs to be included so I send the PR again.
* pr/1483:
CLOUDSTACK-9287 - Improve test by checking if pvt gw is removed and fix typos
CLOUDSTACK-9287 - Fix RVR public interface
CLOUDSTACK-9287 - Add integration test to cover the private gateway related changes
CLOUDSTACK-9287 - Refactor the interface state configuration
CLOUDSTACK-9287 - Check if the nic profile has already been removed from a certain router
CLOUDSTACK-9287 - Bring up the private gw interface on state change to master
CLOUDSTACK-9287 - Make sure private gw interface is not used for default gw
CLOUDSTACK-9287 - Add integration test to cover the private gw interface/mac address issues
CLOUDSTACK-9287 - Put private gateway interface down on backup router
CLOUDSTACK-9287 - Generate new mac address if router is redundant and nic profile exists
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Support access to a host’s out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature `ipmisim` can be used:
https://pypi.python.org/pypi/ipmisim
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Removes commands.properties file
- Fixes apidocs and marvin to be independent of commands.properties usage
- Removes bundling of commands.properties in deb/rpm packaging
- Removes file references across codebase
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Validate API arguments based on annotations. Introduces:
- NotNullOrEmpty: for doing null and empty string checks
- PositiveNumber: number > 0 (natural number)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8901: PrepareTemplate job thread hard-coded to max 8 threads The thread pool was hardcoded to use 8 threads,
com.cloud.template.TemplateManagerImpl.configure(String, Map<String, Object>):
_preloadExecutor = Executors.newFixedThreadPool(8, new NamedThreadFactory("Template-Preloader"));
Added the change to pick threadpool size from configuration.
* pr/880:
CLOUDSTACK-8901: PrepareTemplate job thread hard-coded to max 8 threads
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9351: Add ids parameter to resource listing API calls## General behaviour
A new parameter is added in each method, its type a list of IDs of the entity, it will be mutually exclusive with id. (Similar to <code>id</code> and <code>ids</code> parameters in <code>listVirtualMachines</code> method)
### API Methods affected
* <code>listTemplates</code>: new parameter **<code>ids</code>**, mutually exclusive with <code>id</code>
* <code>listVolumes</code>: new parameter **<code>ids</code>**, mutually exclusive with <code>id</code>
* <code>listSnapshots</code>: new parameter **<code>ids</code>**, mutually exclusive with <code>id</code>
* <code>listVMSnapshots</code>: new parameter **<code>vmsnapshotids</code>**, mutually exclusive with <code>vmsnapshotid</code>
* pr/1497:
CLOUDSTACK-9351: Add marvin test and add it to travis file
CLOUDSTACK-9351: Add ids parameter to resource listing API calls
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage- KVM-HA- Fix CheckOnHost for Local storage
- Also skip HA on VMs that are using local storage
* pr/1496:
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage - Also skip HA on VMs that are using local storage
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Fixes JSON deserialization of cmdInfo (current process fails with
StringIndexOutOfBoundsException when cmdEventType is the last parameter
in the JSON string.
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM idWhen calling listServiceOfferings with VM id as parameter. It is returning incompatible tagged offerings. It should only list all compatible tagged offerings. Compatible means the new service offering should contain all the tags of the existing service offering(Existing offering SUBSET of new offering). If that is the case It should list in the result and can be upgraded to that offering.
* pr/1321:
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM id
Signed-off-by: Will Stevens <williamstevens@gmail.com>
[4.7] vmware: improve support for disks- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
* pr/1365:
vmware: improve support for disks
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9323: Fix cancel host maintenance canFix cancel host maintenance so that if maintenance is cancelled the host come back to normal state gracefully.
Added marvin tests for host maintennace.
* pr/1454:
CLOUDSTACK-9323: Fix Cancel maintenance so that if maintenance is cancelled the host come back to normal state gracefully. Added marvin tests for host maintennace.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
* 4.8:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
* 4.7:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
CLOUDSTACK-9349: Enable root disk detach for KVM with new Marvin testsThis PR addresses the KVM detach/attach ROOT disks from VMs (CLOUDSTACK-9349). In short, this allows the KVM Hypervisor, and I added the Simulator as a valid hypervisor for ease of development and testing of marvin, to detach a root volume and the reattach a root volume using the deviceid=0 flag to the attachVolume API. I have also written a marvin integration test that verifies this feature works for both KVM and the Simulator.
Below is the marvin results files of the full marvin test_volumes.py. All tests pass, including the new root detach/attach, on our KVM lab running with the patches in this PR.
[test_volumes_KIR4G3.zip](https://github.com/apache/cloudstack/files/223799/test_volumes_KIR4G3.zip)
* pr/1500:
Removed sleeps and used validateList as requested.
Added required_hardware="false" attr above test_02_root_volume_attach_detach
Modified test_volumes.py to include a hypervisor test for root attach/detach testing
Let hypervisor type KVM and Simulator detach root volumes. Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Fixed: Error given when creating VPN user in one network if VR for another network is stopped.
Problem: Adding a VPN user to an IP on an isolated network fails with an exception if the end-user has two isolated networks and one of them is not in use (i.e. VR is stopped).
Fix: Presently in the code, all the VR which are not in Running state are forced to throw error. Added a check for the Stopped and Stopping state routers. Configurations will be applied to them when they get restarted.
* pr/826:
Fixed Coverity Issue: Unintentional Integer FLow
Fixed: Error given when creating VPN user in one network if VR for another network is stopped
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9322: Support for Internal LB fuctionality with Nuage VSP SDN Plugin including Marvin test coverageTask: https://issues.apache.org/jira/browse/CLOUDSTACK-9322
PR contents:
1) UI changes to support LB provider InternalLbVm during VPC offering creation.
2) Bug fix for CLOUDSTACK-9320.
3) Nuage VSP SDN Plugin related enhancements for VPC network functionality.
4) Marvin test coverage for Internal LB support on master with Nuage VSP SDN Plugin.
5) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
6) PEP8 & PyFlakes compliance with our Marvin test code.
Test run:
CloudStack$ nosetests --with-marvin --marvin-config=nuage_ant.cfg test/integration/plugins/nuagevsp/ -a tags=nuagevsp
Test results:
Test user data and password reset functionality with Nuage VSP SDN plugin ... === TestName: test_nuage_UserDataPasswordReset | Status : SUCCESS ===
ok
Test Nuage VSP VPC Offering with different combinations of LB service providers ... === TestName: test_01_nuage_internallb_vpc_Offering | Status : SUCCESS ===
ok
Test Nuage VSP VPC Network Offering with and without Internal LB service ... === TestName: test_02_nuage_internallb_vpc_network_offering | Status : SUCCESS ===
ok
Test Nuage VSP VPC Networks with and without Internal LB service ... === TestName: test_03_nuage_internallb_vpc_networks | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with different combinations of Internal LB rules ... === TestName: test_04_nuage_internallb_rules | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality by performing (wget) traffic tests within a VPC ... === TestName: test_05_nuage_internallb_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with different LB algorithms by performing (wget) traffic tests ... === TestName: test_06_nuage_internallb_algorithms_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with restarts of VPC network components by performing (wget) ... === TestName: test_07_nuage_internallb_vpc_network_restarts_traffic | Status : SUCCESS ===
ok
Test Nuage VSP VPC Internal LB functionality with InternalLbVm appliance operations by performing (wget) ... === TestName: test_08_nuage_internallb_appliance_operations_traffic | Status : SUCCESS ===
ok
Test Basic VPC Network Functionality with Nuage VSP SDN plugin ... === TestName: test_nuage_vpc_network | Status : SUCCESS ===
ok
Test Nuage VSP SDN plugin with basic Isolated Network functionality ... === TestName: test_nuage_vsp | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 11 tests in 12094.705s
OK
Test run logs:
[results.txt](https://github.com/apache/cloudstack/files/187587/results.txt)
[runinfo.txt](https://github.com/apache/cloudstack/files/187588/runinfo.txt)
Test config file:
[nuage_ant.txt](https://github.com/apache/cloudstack/files/222711/nuage_ant.txt)
Note: Attached the Marvin config file as .txt instead of .cfg.
PEP8 & PyFlakes Compliance:
CloudStack$ pep8 --max-line-length=150 test/integration/plugins/nuagevsp/*.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/nuageTestCase.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_password_reset.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vpc_internal_lb.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vpc_network.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/test_nuage_vsp.py
CloudStack$ pyflakes test/integration/plugins/nuagevsp/*.py
#CLOUDSTACK-9322
* pr/1452:
CLOUDSTACK-9322 : Marvin tests for Internal Lb with Nuage VSP
CLOUDSTACK-9320 : InternalLBVM is not getting destroyed when the last Internal Load Balancer rule is removed for the corresponding source IP address
CLOUDSTACK-9322 : Changes to support InternalLbVm with Nuage VSP plugin
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Updated test_volumes.py to include a test for detaching and reattaching a root volume from a vm. I also had to update base.py to allow attach_volume to have the parameter deviceid to be passed as needed.
- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
- Refactor and move VirtualMachineDiskInfo to cloud-utils
- Allows mixing of scsi controller types
- Fixes a NPE case with map passed as null, for example in case of detach volume
command
- Use a osdefault translator that allow use of recent os types added (enums of
which) are not available in the sdk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removed unused code from com.cloud.api.ApiServer**Removed \_ from variables names**: private variables with \_ at the beginning is common in C++ but not in Java.
**Removed unused code from ApiServer:**
- com.cloud.api.ApiServer.getPluggableServices(): unused method;
- com.cloud.api.ApiServer.getApiAccessCheckers(): unused method;
**Methods and variables access level reviewed:**
- com.cloud.api.ApiServer.handleAsyncJobPublishEvent(String, String ,Object): this method was private but the annotation @MessageHandler requests public methods, as can be seen in org.apache.cloudstack.framework.messagebus.MessageDispatcher.buildHandlerMethodCache(Class\<?\>), which searches methods with the @MessageHandler annotation and changes
it to be accessible (setAccessible(true)). Thus, there is no reason for handleAsyncJobPublishEvent be a private method and lead some other dev to wrong conclusions about the use of the method;
- Global variables and methods called just by this class (ApiServer) were changed to private.
**Changed variables and methods from static to non-static (if possible):** as some variables/methods are used just by one object of this class, instantiated by Spring, they were changed to non-static.
With that, calls from com.cloud.api.ApiServlet.ApiServlet() that used static methods from ApiServer, were changed from ApiServer.\<staticMethodName\> to \_apiServer.\<methodName\> that refers to the org.apache.cloudstack.api.ApiServerService interface. Thus, methods com.cloud.api.ApiServer.getJSONContentType() and com.cloud.api.ApiServer.isSecureSessionCookieEnabled() had to be added in the interface (org.apache.cloudstack.api.ApiServerService, interface implemented by class ApiServer).
* pr/1263:
The goal of this PR is to review com.cloud.api.ApiServer class, with the following actions:
Signed-off-by: Will Stevens <williamstevens@gmail.com>
following actions:
Removed “_” in beginning of global variables names:
Variables was changed from “_<variablename>” to “<variablename>”, as
this convension (private veriables with “_”) is common in C++ but not in
Java.
Removed unused code from ApiServer:
- com.cloud.api.ApiServer.getPluggableServices():
Unused method.
- com.cloud.api.ApiServer.getApiAccessCheckers():
Unused method.
Methods and variables access level reviewed:
- com.cloud.api.ApiServer.handleAsyncJobPublishEvent(String, String,
Object):
This method was private but the annotation @MessageHandler requests
public methods, as can be seen in
org.apache.cloudstack.framework.messagebus.MessageDispatcher.buildHandlerMethodCache(Class<?>),
which searches methods with the @MessageHandler annotation and changes
it to accessible (“setAccessible(true)”). Thus, there is no reason for
handleAsyncJobPublishEvent be a private method.
- Global variables and methods called just by this class (ApiServer)
were changed to private.
Changed variables and methods from static to non static (if possible):
As some variables/methods are used just by one object of this class
(instantiated by springer), they were changed to non static.
With that, calls from com.cloud.api.ApiServlet.ApiServlet() that used
static methods from ApiServer, was changed from
ApiServer.<staticMethodName> to _apiServer.<methodName> that refers to
the org.apache.cloudstack.api.ApiServerService interface. Thus, methods
com.cloud.api.ApiServer.getJSONContentType() and
com.cloud.api.ApiServer.isSecureSessionCookieEnabled() had to be
included in the interface (org.apache.cloudstack.api.ApiServerService,
interface implemented by class ApiServer).
However, com.cloud.api.ApiServer.isEncodeApiResponse() was keept static,
as its call hierarchy would have to be changed (more than planed for
this PR).
SecurityGroupRulesCmd code cleanupWrote a test and cleaned some duplicate code with the objective to evaluate the jenkins pull request process at builds.a.o
worthwhile to keep, IMHO.
* pr/1287:
SecurityGroupRulesCmd code cleanup review comments handled
deal with PMD warnings
code cleanup
security rules test
remove autogenerated pydev files
Signed-off-by: Koushik Das <koushik@apache.org>
- In case of redundant VPCs, the ACL items are revoked in the first iteration. Since the econd iteration
is needed in order to remove the private network, we have to check if the nic profile is gone before trying
to revoke the ACL items again, which would throw a NPE.
- Some variable extraction in order to ease debugging.
CLOUDSTACK-9333: Exclude clusters from OVF operationsJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9333
## Introduction
In some environments there is a need to exclude certain VMware clusters from performing OVF operations. This operations are part of:
* create template
* create volume snaphsot
* copy template, volume, images from primary storage to secondary storage
* migrate volume
* participate when a template gets cached over to primary storage.
In ESX/ESXi, OVF operations are low priority and bound to a single CPU and most likely get throttled to certain IOPS and network limits.
If the hypervisor chosen for OVF operations is weak or overloaded this results in significantly longer execution of such OVF command and therefore degraded performance of underlying CloudStack API call.
### Proposed solution
It is proposed to add a way to exclude hosts from selected clusters for OVF operations.
To exclude a cluster, would be necessary to insert a record in <code>cluster_details</code> specifying property **vmware.exclude_from_ovf** in this way: (supposing we want to exclude cluster X)
| cluster_id | name| value |
|:-------------:|:-------------:|:-------------:|
|X|vmware.exclude_from_ovf|true|
* pr/1457:
CLOUDSTACK-9333: Exclude clusters for OVF operations
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Add ability to download templates in SwiftThis PR adds the ability to download templates when using Swift as a secondary storage. Uses the "temp_url" feature of Swift so that tempates can be downloaded without authenticaiton.
* pr/1332:
Add ability to download templates in Swift
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9298: Improve performance of resource retrieval that have tags associated and target volumes, VMs and templatesJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9298
## Description of the problem
When retrieving a large number of resources which have tags associated with, retrieval methods took too long. Our goal is to improve performance of this methods avoiding query the database for each tag, managing that information in memory.
API methods to improve: <code>listTemplates</code>, <code>listVolumes</code>, <code>listVirtualMachines</code>
To achive it, it's necessary to include new columns in <code>template_view</code>, <code>volume_view</code> and <code>user_vm_view</code>:
* tag_account_name
* tag_domain_name
* tag_domain_uuid
* pr/1425:
CLOUDSTACK-9298: Remove user definer from view creations
CLOUDSTACK-9298: Add @MappedSuperClass support for persistence inheritance
CLOUDSTACK-9298: Improve ListTemplatesCmd, ListVolumesCmd and ListVMsCmd performance
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It is now broken into separate methods for more readability and
flexibility. Each zone type (basic, advanced) has its own method for
getting the default network when creating the VM.
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMfor xenserver,kvm and for vmware.
* pr/780:
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Kishan Kavala <kishan@apache.org>
Removed unused variables from "NetworkStateListener" classWe removed the following variables from "com.cloud.network.NetworkStateListener"
. UsageEventDao _usageEventDao
. NetworkDao _networkDao
We changed the EventBus s_eventBus variable to private, the constructor not to use those variables and applied this change in classes com.cloud.network.IpAddressManagerImpl and org.apache.cloudstack.engine.orchestration.NetworkOrchestrator
* pr/1261:
Removed unused variables from class NetworkStateListener
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removal of class AgentBasedStandaloneConsoleProxyManagerThe AgentBasedStandaloneConsoleProxyManager class is neither manually
instatiated anywhere in the code nor via Spring. Further checking in the
interface which the class implements, shows that the use for classes
implementing the EventBus interface relies on instances generated by the
Spring framework, which discards the possibility of the class being
created by EJB. Being the class useless, it was discarded.
* pr/855:
Add Javadoc to AgentBasedStandaloneConsoleProxyManager
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8858: listVolumes API fails for a particular domain with NPE.CLOUDSTACK-8858: listVolumes API fails for a particular domain with NPE.
Summary: listVolumes API fails when volume associated vm instance has NULL or invalid state. Fix the code to guard this situation since this should not block volume listing.
* pr/830:
CLOUDSTACK-8858: listVolumes API fails for a particular domain with NPE.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.7:
CLOUDSTACK-9254: Make longer names display pretty
CLOUDSTACK-9245 - Deletes ACL items when destroying the VPC or deleting the ACL itself
CLOUDSTACK-9245 - Formatting NetworkACLServiceImpl class
CLOUDSTACK-9245 - Formatting VpcManagerImpl class
CLOUDSTACK-9245 - Formatting NetworkACLManagerImpl class
More VR performance!
* 4.7:
CLOUDSTACK-9245 - Deletes ACL items when destroying the VPC or deleting the ACL itself
CLOUDSTACK-9245 - Formatting NetworkACLServiceImpl class
CLOUDSTACK-9245 - Formatting VpcManagerImpl class
CLOUDSTACK-9245 - Formatting NetworkACLManagerImpl class
* 4.7:
CLOUDSTACK-9237: Create LB Healthcheck issues - button alignment and error message goes outside the window
CLOUDSTACK-9235: Autoscale button is missing in VPC
CLOUDSTACK-9229: Autoscale policy creation failing in VPC due to zoneid missing in createAutoScaleVmProfile
CLOUDSTACK-8860: improve error messages in VM deployment code path.improved the error messages in vm deployment code path. added some more data to the error messages and also fixed some errors using internal ids to use uuids.
* pr/864:
CLOUDSTACK-8860: improve error messages in VM deployment code path.
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9132: API createVolume takes empty string for name parameterSteps to Reproduce:
================
Create a volume using createVolume API where parameter name is empty.
It creates a volume with empty name.
But the name parameter is mandatory.(Issue)
Expected Behaviour:
================
It shouldn't create a volume with an empty name. Error should be returned.
Solution:
=======
Added a condition to check in case of empty string. If the name is an empty string, it generates a random name for the volume. Made the name field optional in UI as well as in API.
* pr/1319:
CLOUDSTACK-9132: API createVolume takes empty string for name parameter
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9222 Prevent cloud.log.1 filling up the disk
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
NicProfileHelperImpl NullpointerException when ipVO is nullWhen a VPC has a private gateway, and one would like to restart the VPC with **cleanup** it would fail.
This PR adds a NullPointer check and verifies it with an integration test.
```
test_01_vpc_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_01_vpc_privategw_acl | Status : SUCCESS ===
ok
test_02_vpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_02_vpc_privategw_static_routes | Status : SUCCESS ===
ok
test_03_vpc_privategw_restart_vpc_cleanup (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS ===
ok
test_04_rvpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_04_rvpc_privategw_static_routes | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 4 tests in 2945.055s
OK
```
* pr/1328:
Add integration test for restartVPC with cleanup, and Private Gateway enabled.
Nullpointer Exception in NicProfileHelperImpl
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin user
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failing
CLOUDSTACK-6485 prevent ip asignment of private gw iface
CLOUDSTACK-9204 Do not error when staticroute is already gone
make both check lines consistent
CLOUDSTACK-9181 Prevent syntax error in checkrouter.sh
CLOUDSTACK-9202 Bump ssh timeout
[4.7] FIX Site2SiteVPN on redundant VPCThis PR:
- fixes the inability to setup more than one Site2Site VPN connection from a VPC
- fixes starting of Site2Site VPN on redundant VPC
- fixes Site2Site VPN state checking on redundant VPC
- improves the vpc_vpn test to allow multple hypervisors
- adds an integration test for Site2Site VPN on redundant VPC
Tested it on 4.7 single Xen server zone:
command:
```
nosetests --with-marvin --marvin-config=/data/shared/marvin/mct-zone1-xen1.cfg -a tags=advanced,required_hardware=true /tmp/test_vpc_vpn.py
```
results:
```
Test Site 2 Site VPN Across redundant VPCs ... === TestName: test_01_redundant_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_01_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test Site 2 Site VPN Across VPCs ... === TestName: test_01_vpc_site2site_vpn | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 3 tests in 1490.076s
OK
```
also performed numerous manual inspections of state of VPN connections and connectivity between VPC's
* pr/1276:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-6485 prevent ip asignment of private gw ifacePrevent ipaddress asignment of gateway to gateway-interface on vpc router by setting vpcid to null in network. This was fixed in 4.4 by 1f209ff226, reimplemented for 4.7
* pr/1299:
CLOUDSTACK-6485 prevent ip asignment of private gw iface
Signed-off-by: Remi Bergsma <github@remi.nl>
Added conditions to check if the name is empty or blank.
If it is empty or blank, then it generates a random name.
Made the name field as optional in UI as well as in API.
Added required unit tests.
Prevent ipaddress asignment of gateway to gateway-interface on vpc router by setting vpcid to null in network
Was fixed in 4.4 by 1f209ff226
Reimplemented for 4.7
* 4.6:
[UI] bug fix: Delete added ACL lists is not available for Domain Admin and normal users
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
[4.6] CLOUDSTACK-4787 - vmware diskcontrollersSame as #1131 (see this for screenshots etc)
* pr/1132:
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-4374 - As a Developer I want to have HA enabled for routers that are part or a redundant network or VPCThis PR fixes the issue we were facing with crashed redundant routers not being picked up by the HA monitor due to an IF statement in the code.
* Redundant Routers are not the same as Haigh Available. Having a router HA is actually saying that the given router will be controlled by the High Availability monitor. Hence fix any problem we might face.
* pr/1222:
CLOUDSTACK-4374 - Adds HA capabilities to redundant routers
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9086: ACS allows to create isolated networks with invalide gateway IP address - Fixed and Test cases added
Problem: There was no check for the network and broadcast IP addresses in the case where we provide the gateway and netmask while creating the isolated network. As a result the provided IP gets assigned to the eth0 interface of the VR.
Note: This is in continuation of PR #1125 which I closed.
* pr/1188:
CLOUDSTACK-9086: ACS allows to create isolated networks with invalide gateway IP address - Fixed and Test cases added
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9138 - Adds multiple providers back to VPC implementation - It is need and already allowed/used in the current implementation. For example, the Default [redundant] VPC offerings use two LB providers. If we cannot create offerings with 2 LB providers, the whole internal loadbalancer implementation won't work.
* pr/1215:
CLOUDSTACK-9138 - Adds multiple providers back to VPC implementation
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] CLOUDSTACK-9129: list vpc routers by keyword in Infrastructure -> Virtual Routers
and two more changes:
(1) add network name/vpc name in the listRouters response
(2) add network name/vpc id, vpc name in the router details page
* pr/1197:
CLOUDSTACK-9129: list vpc routers by keyword in Infrastructure -> Virtual Routers
Signed-off-by: Remi Bergsma <github@remi.nl>
- Redundant Routers are not the same as Haigh Available.
Having a router HA is actually saying that the given router will be controlled by the High Availability monitor.
Hence fix any problem we might face.
- It is need and already allowed/used in the current implementation. For example, the Default [redundant] VPC offerings use
two LB providers. If we cannot create offerings with 2 LB providers, the whole internal loadbalancer implementation won't work
* 4.6:
CLOUDSTACK-9106 - Makes Enum name compliant with Java code conventions.
CLOUDSTACK-9106 - Adds a test to cover the changes in the applyVpnUsers() method
CLOUDSTACK-9106 - Makes the router commands call more consistent.
CLOUDSTACK-9106 - Enables private gateway tests on Redundant VPCs
CLOUDSTACK-9106 - Refactor the createPrivateNicProfileForGateway() method
CLOUDSTACK-9106 - Reduces the amount of iterations through the routers of a VPC
Add support for not (re)starting server after cloud-setup-management.
Closed PRs that will not be considered for merge:
This closes#1158
This closes#1097
Quota service while allowing for scalability will make sure that the cloud is
not exploited by attacks, careless use and program errors. To address this
problem, we propose to employ a quota-enforcement service that allows resource
usage within certain bounds as defined by policies and available quotas for
various entities. Quota service extends the functionality of usage server to
provide a measurement for the resources used by the accounts and domains using a
common unit referred to as cloud currency in this document. It can be configured
to ensure that your usage won’t exceed the budget allocated to accounts/domain
in cloud currency. It will let user know how much of the cloud resources he is
using. It will help the cloud admins, if they want, to ensure that a user does
not go beyond his allocated quota. Per usage cycle if a account is found to be
exceeding its quota then it is locked. Locking an account means that it will not
be able to initiat e a new resource allocation request, whether it is more
storage or an additional ip. Needless to say quota service as well as any action
on the account is configurable.
Changes from Github code review:
- Added marvin test for quota plugin API
- removed unused commented code
- debug messages in debug enabled check
- checks for nulls, fixed access to member variables and feature
- changes based on PR comments
- unit tests for UsageTypes
- unit tests for all Cmd classes
- unit tests for all service and manager impls
- try-catch-finally or try-with-resource in dao impls for failsafe db switching
- remove dead code
- add missing quota calculation case (regression fixed)
- replace tabs with spaces in pom.xmls
- quota: though default value for quota_calculated is 0, the usage server
makes it null while entering usage entries. Flipping the condition so
as to acocunt for that.
- quotatypes: fix NPE in quota type
- quota framework test fixes
- made statement period configurable
- changed default email templates to reflect the fact that exhausted quota may not result in a locked account
- added quotaUpdateCmd that refreshes quota balances and sends alerts and statements
- report quotaSummary command returns quota balance, quota usage and state for all account
- made UI framework changes to allow for text area input in edit views
- process usage entries that have greater than 0 usage
- orocess quota entries only if tariff is non zero
- if there are credit entries but no balance entry create a dummy balance entry
- remove any credit entries that are before the last balance entry
when displaying balance statement
- on a rerun the last balance is now getting added
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Quota+Service+-+FS
PR: https://github.com/apache/cloudstack/pull/768
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Changed the NetworkTopologyContext class just to make the private member accessible from the test
- Added a test class to cover the positive scenario of the VpcVirtualRouterElementTest.applyVpnUsers() method.
- Covering when there is either no VPC or no routers.
- Checks the result of a call against the previous result. Either both are true or the method returns false.
- Do not thrown exceptions because some calls are not handling/rethrowing them. It would cause runtime problems.
- When doing a list.addAll(Arrays.asList(String[]{}) will cause problems when trying to cast the list.toArray() into an aray of String
It would only work if instead of calling addAll() I would pass it straight into the constructor:
e.g. List<String> l = new ArrayList(Arrays.asList(new String[]{});
Stirng [] s = (String[]) l.toArray();
But I did not like that implementation because it would require 2 arrays of string and combine them at the end.
- Use the router to retrieve the instance ID
- Check if the VPC is redundant in order to reuse the private gateway address.
- Brings the private gateways interfaces up.
- It was causing problems because Nics were expected to be plugged before they actually exist. Only in rVPC cases.
- Applies ACL items to routers only after the Pvt GW is setup.
CLOUDSTACK-9094: Multiple threads are being used to collect the statsCLOUDSTACK-9094: Multiple threads are being used to collect the stats from the same VR
Same thread is being intialised by two managers, VirtualNetworkApplianceManager and VpcVirtualNetworkApplianceManager
* pr/1140:
CLOUDSTACK-9094: Multiple threads are being used to collect the stats from the same VR
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9025: Fixed can't create usable template from snapshot in Xenserver and Vmwarehttps://issues.apache.org/jira/browse/CLOUDSTACK-9025
Fix also reverts below commit as below solution making assumption about hypervisor which are not applicable in case of XenServer and VmWare
Revert "CLOUDSTACK-8964: Can't create template or volume from snapshot"
This reverts commit ccf5d75cfb.
Testing:
Able to deploy VM successfully from template created from linked clone snapshot on XenServer.
* pr/1176:
CLOUDSTACK-9025: Fixed can't create usable template from snapshot in Xenserver and Vmware
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9047 rename enumsmake enums adhere to best practice naming conventions
* pr/1049:
CLOUDSTACK-9046 rename enums to adhere to naming conventions
CLOUDSTACK-9046 renamed enums in kvm plugin
CLOUDSTACK-9047 use 'State's only with context there are more types called 'State' (or to be called so but now 'state') So remove imports and prepend their enclosing class/context to them.
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9101: fix some issues in resize volume(1) fix issue: volume size is not updated even if the operation succeed
(2) Add ui support for root volume resize
(3) resize on qcow2 type ROOT volume of stopped vm does not really work
see https://issues.apache.org/jira/browse/CLOUDSTACK-9101
* pr/1161:
CLOUDSTACK-9101: resize root volume of stopped vm on KVM
CLOUDSTACK-9101: add UI support for root volume resize
CLOUDSTACK-9101: update volume size after resizevolume
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9051: update nic IP address of stopped vmThis provides the feature to change ip address of NIC on a stopped vm by API and UI.
* pr/1086:
CLOUDSTACK-9051: reprogram network as a part of vm nic ip update
CLOUDSTACK-9051: add unit tests for UpdateVmNicIp
CLOUDSTACK-9051: update nic IP address of stopped vm
Signed-off-by: Daan Hoogland <daan@onecht.net>
Removed the PlannerBase class because it is does not bring contribution to ACS' code.Removed the PlannerBase class because it is does not bring contribution to ACS' code.
We changed com.cloud.deploy.FirstFitPlanner, now it doesnt extends the PlannerBase and implements the com.cloud.deploy.DeploymentPlanner.
We also removed the method com.cloud.deploy.DeploymentPlanner.check(VirtualMachineProfile, DeploymentPlan, DeployDestination, ExcludeList) that was not used anywhere.
Additionally, we removed the _ from FirstFitPlanner's attributes name, in order to have them in a more standard way.
* pr/1108:
Removed PlannerBase empty class
Signed-off-by: Remi Bergsma <github@remi.nl>
Fix also reverts below commit as below solution making assumption about hypervisor which are not applicable
in case of XenServer and VmWare
Revert "CLOUDSTACK-8964: Can't create template or volume from snapshot"
This reverts commit ccf5d75cfb.
* 4.6:
CLOUDSTACK-9075 - Uses the same vlan since it should have been already released
CLOUDSTACK-9075 - Adds VPC static routes test
CLOUDSTACK-9075 - Covers Private GW ACL with Redundant VPCs
CLOUDSTACK-9075 - Add method to get list of Physical Networks per zone
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
CLOUDSTACK-6276 Fixing affinity groups for projectsWith some contributions from @resmo and @ustcweizhou.
This closes https://github.com/apache/cloudstack/pull/508
To test manually (need at least 2 hosts):
Create a project
Create an affinity group in that project
Deploy a vm with that affinity group
Deploy a second vm with that affinity group
They should be on different hosts
Ran old and new tests for affinity groups on the simulator
Test create affinity group as admin in project ... === TestName: test_01_admin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as domain admin for projects ... === TestName: test_02_doadmin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as user for projects ... === TestName: test_03_user_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) for projects ... === TestName: test_4_user_create_aff_grp_existing_name_for_project | Status : SUCCESS ===
ok
#Delete Affinity Group by id. ... === TestName: test_01_delete_aff_grp_by_id | Status : SUCCESS ===
ok
#Delete Affinity Group by id should fail for user not in project ... === TestName: test_02_delete_aff_grp_by_id_another_user | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_01_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups with more vms than hosts. ... === TestName: test_02_deploy_vm_anti_affinity_group_fail_on_not_enough_hosts | Status : SUCCESS ===
ok
List affinity group for a vm for projects ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm for projects ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id for projects ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name for projects ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id for projects ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name for projects ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group for projects ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 16 tests in 581.706s
OK
Deploy vm as Admin in Affinity Group belonging to regular user (should fail) ... === TestName: test_01_deploy_vm_another_user | Status : SUCCESS ===
ok
Create Affinity Group as admin for regular user ... === TestName: test_02_create_aff_grp_user | Status : SUCCESS ===
ok
List Affinity Groups as admin for all the users ... === TestName: test_03_list_aff_grp_all_users | Status : SUCCESS ===
ok
List Affinity Groups belonging to admin user ... === TestName: test_04_list_all_admin_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing account id and domain id ... === TestName: test_05_list_all_users_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing group id ... === TestName: test_06_list_all_users_aff_grp_by_id | Status : SUCCESS ===
ok
Delete Affinity Group belonging to regular user ... === TestName: test_07_delete_aff_grp_of_other_user | Status : SUCCESS ===
ok
Test create affinity group as admin ... === TestName: test_01_admin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as domain admin ... === TestName: test_02_doadmin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as user ... === TestName: test_03_user_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) ... === TestName: test_04_user_create_aff_grp_existing_name | Status : SUCCESS ===
ok
Test create affinity group with existing name but within different account ... === TestName: test_05_create_aff_grp_same_name_diff_acc | Status : SUCCESS ===
ok
Test create affinity group of non-existing type ... === TestName: test_06_create_aff_grp_nonexisting_type | Status : SUCCESS ===
ok
Delete Affinity Group by name ... === TestName: test_01_delete_aff_grp_by_name | Status : SUCCESS ===
ok
Delete Affinity Group as admin for an account ... === TestName: test_02_delete_aff_grp_for_acc | Status : SUCCESS ===
ok
Delete Affinity Group which has vms in it ... === TestName: test_03_delete_aff_grp_with_vms | Status : SUCCESS ===
ok
Delete Affinity Group with id which does not belong to this user ... === TestName: test_05_delete_aff_grp_id | Status : SUCCESS ===
ok
Delete Affinity Group by name which does not belong to this user ... === TestName: test_06_delete_aff_grp_name | Status : SUCCESS ===
ok
Delete Affinity Group by id. ... === TestName: test_08_delete_aff_grp_by_id | Status : SUCCESS ===
ok
Root admin should be able to delete affinity group of other users ... === TestName: test_09_delete_aff_grp_root_admin | Status : SUCCESS ===
ok
Deploy VM without affinity group ... === TestName: test_01_deploy_vm_without_aff_grp | Status : SUCCESS ===
ok
Deploy VM by aff grp name ... === TestName: test_02_deploy_vm_by_aff_grp_name | Status : SUCCESS ===
ok
Deploy VM by aff grp id ... === TestName: test_03_deploy_vm_by_aff_grp_id | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_04_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
Deploy vms by affinity group id ... === TestName: test_05_deploy_vm_by_id | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by name ... === TestName: test_06_deploy_vm_aff_grp_of_other_user_by_name | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by id ... === TestName: test_07_deploy_vm_aff_grp_of_other_user_by_id | Status : SUCCESS ===
ok
Deploy vm in multiple affinity groups ... === TestName: test_08_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy multiple vms in multiple affinity groups ... === TestName: test_09_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy VM by aff grp name and id ... === TestName: test_10_deploy_vm_by_aff_grp_name_and_id | Status : SUCCESS ===
ok
List affinity group for a vm ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupnames ... === TestName: test_02_update_aff_grp_by_names | Status : SUCCESS ===
ok
Update the list of affinityGroups for vm which is not associated ... === TestName: test_03_update_aff_grp_for_vm_with_no_aff_grp | Status : SUCCESS ===
ok
Update the list of Affinity Groups to empty list ... SKIP: Skip - Failing - work in progress
Update the list of Affinity Groups on running vm ... === TestName: test_05_update_aff_grp_on_running_vm | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 42 tests in 976.432s
OK (SKIP=1)
* pr/1134:
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9022: move storage.cleanup related global configurations to StorageManager
CLOUDSTACK-9022: keep Destroyed volumes for sometime
Conflicts:
server/src/com/cloud/storage/StorageManagerImpl.java
CLOUDSTACK-8868: use PasswordGenerator.generateRandomPassword() to generate systemvm passwordsgenerateRandomPassword() is supposed to create root user passwords. Right now it is only used on the guest VMs. The format of the passwords it creates are of the form "random 3-character string with a lowercase character, uppercase character, and a digit" + random n-character string with only lowercase characters".
For whatever reason it was that we use generateRandomPassword() for guest VM root user passwords(maybe more secure?) we should use the same function for system VM root user passwords.
Tests:
manually tested that password is generated in proper format and am able to login to cpvm with the new password. ex: zD2ztm, tR8snbwhq
```
$ mvn -pl server test -Dtest=ConfigurationServerImplTest#testUpdateSystemvmPassword
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running com.cloud.server.ConfigurationServerImplTest
log4j:WARN No appenders could be found for logger (com.cloud.utils.crypt.EncryptionSecretKeyChecker).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info.
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.487 sec - in com.cloud.server.ConfigurationServerImplTest
Results :
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 7.781 s
[INFO] Finished at: 2015-09-16T14:17:07+05:30
[INFO] Final Memory: 60M/466M
[INFO] ------------------------------------------------------------------------
```
* pr/841:
CLOUDSTACK-8868: change the default vm.password.length to 10
CLOUDSTACK-8868: use same method to generate passwords for system/guest vms
removed commented code
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9080: Resource limits for Primary arent respected during attachprimary store resource limit check is not performed while attaching a
volume to a vm. Added them same.
Also added a marvin test case to verify the same.
Testing:
BEFORE
No error is shown in UI when trying to attach a volume even after reaching the resource limits.
```
mysql> select * from resource_limit where type="primary_storage";
+----+-----------+------------+-----------------+-------------+
| id | domain_id | account_id | type | max |
+----+-----------+------------+-----------------+-------------+
| 10 | NULL | 4 | primary_storage | 21474836480 |
+----+-----------+------------+-----------------+-------------+
1 row in set (0.00 sec)
mysql> select * from resource_count where account_id=4 and type='primary_storage';
+----+------------+-----------+-----------------+-------------+
| id | account_id | domain_id | type | count |
+----+------------+-----------+-----------------+-------------+
| 63 | 4 | NULL | primary_storage | 48318382080 |
+----+------------+-----------+-----------------+-------------+
1 row in set (0.00 sec)
```
AFTER
Following error message is shown in UI and the volume is not attached
The resource limits stays the same
```
mysql> select * from resource_limit where type="primary_storage";
+----+-----------+------------+-----------------+-------------+
| id | domain_id | account_id | type | max |
+----+-----------+------------+-----------------+-------------+
| 10 | NULL | 4 | primary_storage | 21474836480 |
+----+-----------+------------+-----------------+-------------+
1 row in set (0.01 sec)
mysql> select * from resource_count where account_id=4 and type='primary_storage';
+----+------------+-----------+-----------------+-------------+
| id | account_id | domain_id | type | count |
+----+------------+-----------+-----------------+-------------+
| 63 | 4 | NULL | primary_storage | 48318382080 |
+----+------------+-----------+-----------------+-------------+
1 row in set (0.00 sec)
```
Marvin test: nosetests --with-marvin --marvin-config=setup/dev/advanced.cfg --zone=xen-zone0 --hypervisor=xenserver test/integration/component/test_ps_resource_limits_volume.py
before the change
```
# do ... === TestName: test_attach_volume_exceeding_primary_limits | Status : FAILED ===
AssertionError: Resource count 23 should match with the expected resource count 22\n
```
After the change
```
# do ... === TestName: test_attach_volume_exceeding_primary_limits | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 1178.354s
OK
```
* pr/1107:
CLOUDSTACK-9080: Resource limits for Primary arent respected during attach.
Signed-off-by: Remi Bergsma <github@remi.nl>
The PlannerBase is an empty class, and does not bring contribution to
ACS code.
We changed com.cloud.deploy.FirstFitPlanner to extend the AdapterBase
and implements the com.cloud.deploy.DeploymentPlanner.
We also removed the method
com.cloud.deploy.DeploymentPlanner.check(VirtualMachineProfile,
DeploymentPlan, DeployDestination, ExcludeList) that was not used
anywhere.
Additionally, we removed the “_” from FirstFitPlanner's attributes name,
in order to have them in a more standard way.
CLOUDSTACK-8866 : restart.retry.interval is being used instead of migrate.retry.interval during host maintenanceThe frequency at which Cloudstack tries to migrate the VMs is currently controlled by the global parameter "restart.retry.interval" which has a default value of 600 seconds or 10 minutes.This has to be changed to use "migrate.retry.interval" which by default is 120 seconds or 2 minutes . Cloudstack uses restart.retry.interval for all operations-migrate,restart,stop,destroy.
* pr/834:
CLOUDSTACK-8866 : restart.retry.interval is being used instead of migrate.retry.interval during host maintenance
Signed-off-by: Daan Hoogland <daan@onecht.net>
* 4.6:
CLOUDSTACK-9020: UI enhancements from metrics view
CLOUDSTACK-9064: The users should be able to create multiple Guest Shared Networks in same Vlan ID, same Physical Network and same network, just with a different IP ranges.
CLOUDSTACK-9078: Gave scripts executable permissions.
CLOUDSTACK-9076: Changed ownership of directory /var/lib/cloudstack to cloud.
Cannot list vlanipranges by keyword
[4.6] Cannot list vlanipranges by keywordBefore change:
cloudmonkey> list vlanipranges keyword=118
: Caught: com.mysql.jdbc.JDBC4PreparedStatement@18f36b6e: SELECT vlan.id, vlan.vlan_id, vlan.vlan_gateway, vlan.vlan_netmask, vlan.ip6_gateway, vlan.ip6_cidr, vlan.data_center_id, vlan.description, vlan.ip6_range, vlan.network_id, vlan.physical_network_id, vlan.vlan_type, vlan.uuid, vlan.removed, vlan.created FROM vlan WHERE ( OR vlan.description LIKE ** NOT SPECIFIED ** ) AND vlan.removed IS NULL ORDER BY vlan.id ASC LIMIT 0, 500
After change:
cloudmonkey> list vlanipranges keyword='118'
count = 1
vlaniprange:
id = 0d80fd9c-cd6b-4f99-96c6-261420e75f58
account = system
domain = ROOT
domainid = 2044762d-c4a5-11e3-8379-005056ac4490
......
* pr/1085:
Cannot list vlanipranges by keyword
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] CLOUDSTACK-8958: add dedicated ips to domain (account for now)For now, we dedicate ip pool to account, however, other accounts in the same domain cannot fetch the ip from this ip pool.
By dedicating ip pool to domain, accounts in the domain can fetch the public ip from same ip pool.
* pr/1007:
CLOUDSTACK-8958: throw an exception if project account cannot be found
CLOUDSTACK-8958: add dedicated ips to domain (account for now)
Signed-off-by: Remi Bergsma <github@remi.nl>
Removal of DefaultUserAuthenticator empty class.The DefaultUserAuthenticator is an empty class, extending from the
AdapterBase and implementing the UserAuthenticator interface. The class
is not being used as a marker and it's sole use is to be extended by
other UserAuthenticators. Noticing that the class had no purpose, I
removed it and made it's children extend from it's superclass and
implement it's interface instead. Also, I removed the @Local tags from
those classes, since EJB is not used anymore.
* pr/1100:
Removal of DefaultUserAuthenticator empty class
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
Fix event UUIDS missing on event bus
Add select template dropdown when reinstall VM
CLOUDSTACK-9068: Listing Port Forwarding Rules take too much time to load
The DefaultUserAuthenticator is an empty class, extending the
AdapterBase and implementing the UserAuthenticator interface. The class
is only being used as a marker and it's sole use is to be extended by
other UserAuthenticators. Noticing that the class had no purpose, I
removed it and made it's children extend from it's superclass and
implement it's interface instead. Also, I removed the @Local tags from
those classes, since EJB is not used anymore.
- Adds new controller types in the UI, for selecting root disk controller while
registering templates
- Fixes bug to not override disk controller type if provided in the details (either
vm details or from template details)
(cherry picked from commit c7d67628b3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
commit #7
So far only 1 controller (scsi or ide) is supported in Cloudstack for ide or
scsi, this is existing limitation. Added support for 2nd IDE controller. Support adding IDE
virtual disk to VM. Also added check if VM is running as IDE virtual disk cannot be attached
to VM if VM is runnning.If user detaches a virtual disk on lower unit number of controller,
then subsequent attach operation should find free unit number on the controller and attach
the virtual disk there.
commit #6
Let the controllers of existing VMs continue without flip, current busInfo retrieved from
chain_info field of volume record from database would be preferred over
controller settings from all configuration settings.
commit #5
Editing global configuration param vmware.root.disk.controller osdefault value results
in loss of previous root disk controller type. Hence root disk's controller type for legacy
VMs is unknow post that modificaiton by user. If VM is stop/start then we could get this
infromation from bus info of existing volume. But if user resets VM and then try to start VM.
The existing bus info would be lost. Hence existing disk info is not available to depend on.
Using lsilogic or generic scsi controller for ROOT disk of legacy VMs if reset.
commit #4
Avoid adding additional (>1) scsi controllers to system vms. While attaching volume to legacy VM
don't use osdefault optoin which applicable only for VM created with the option enabled, use
legacy data disk controller type (lsilogic)
commit #3
If root disk's controller type is scsi and data disk controller type condenses
to any of scsi sub-types then data disk controller type would fall back to root disk controller itself. This
ensures data volumes would be accessible in all cases as controller of root volume would be reliable
and it means VM has the supported controller. It also avoids mix of scsi controller sub-types in a user instance.
Also translating disk controller type scsi to lsilogic.
commit #2
Support auto detection of recommended virtual disk controller type for specific guest OS.
commit #1
Support granual controller types. Add support for controller types in template registration as well.
Fix white spaces.
Removed stale HEAD merge lines
Removed tail of merge lines
Fixed VmwareResource, removing storage commands that moved to VmwareStorageProcessor.
removed stale code of controller that is present in processor
Fixed check style errors.
Fixed injection.
Tested with Linux and windows templates. Unable to run iso based tests due to few bugs in register iso area.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
(cherry picked from commit a4cc987a6f)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The fixing of CLOUDSTACK-8816 introduced a regression that removed the
first class entities in the event bus description property. This is
because everything was changed to use the Class as a key... Everything
but the populateFirstClassEntities method in ActionEventUtils.
primary store resource limit check is not performed while attaching a
volume to a vm. Added them same.
Also added a marvin test case to verify the same.
CLOUDSTACK-8485: listAPIs are taking too long to return results- Removed regex. based search/replace of sensitive data on API response introduced as part of commit b0c6d47347
- Added new response serializer to skip sensitive data from getting logged based on annotation present in resposne object fields
- Added annotation (@LogLevel(Log4jLevel.Off)) to sensitive response object fields
Ran the following tests on simulator:
test_vm_life_cycle.py
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 10 tests in 306.429s
OK
test_volumes.py
Download a Volume attached to a VM ... === TestName: test_03_download_attached_volume | Status : SUCCESS ===
ok
Delete a Volume attached to a VM ... === TestName: test_04_delete_attached_volume | Status : SUCCESS ===
ok
Detach a Volume attached to a VM ... === TestName: test_05_detach_volume | Status : SUCCESS ===
ok
Delete a Volume unattached to an VM ... === TestName: test_09_delete_detached_volume | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 4 tests in 184.132s
OK
test_network.py
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 4 tests in 783.726s
OK
test_routers.py
Test router internal advanced zone ... SKIP: Marvin configuration has no host credentials to check router services
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 7 tests in 42.958s
OK (SKIP=1)
test_global_settings.py
test update configuration setting at zone level scope ... === TestName: test_UpdateConfigParamWithScope | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 0.127s
OK
test_resource_detail.py
Test volume detail ... === TestName: test_01_updatevolumedetail | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 11.492s
OK
* pr/1021:
CLOUDSTACK-8485: listAPIs are taking too long to return results - Removed regex. based search/replace of sensitive data on API response introduced as part of commit b0c6d47347 - Added new response serializer to skip sensitive data from getting logged based on annotation present in resposne object fields - Added new parameter 'isSensitive' to @Param for marking a field as sensitive in response objects
Signed-off-by: Remi Bergsma <github@remi.nl>
Removed unnecessary @Local annotations and their respective importsFollowing @rafaelweingartner 's findings in PR #714 that many spring beans contained an @Local annotation, we've decided to remove said annotations and their imports from the ComponentLifecycleBase class and its subclasses seeking a reduction of a few hundred lines of useless code.
I had already opened a pull request for this (#853) but at some point my commit disappeared from the PR entirely, showing no new changes in code, which caused it to be merged automatically (with no changes).
* pr/1102:
Removed unnecessary @Local annotations and their respective imports from the ComponentLifecycleBase class and its subclasses.
Signed-off-by: Remi Bergsma <github@remi.nl>
[4.7] CLOUDSTACK-8951: validation for config param "remote.access.vpn.psk.length"throwing error for value < 8 and value > 256
right now, 8, 256 are hardcoded in the code. They should be moved to a
constant and has to be reused everywhere.
will update with test cases/testing later.
* pr/929:
CLOUDSTACK-8951: validation for "remote.access.vpn.psk.length"
Signed-off-by: Remi Bergsma <github@remi.nl>
update for comment in cancelMaintin on start VRchange comment
//if the instance is of type ssvm, call the ssvm manager
to
//if the instance is of type domain router vm, call the network manager
* pr/1065:
update for comment in cancelMaintin on start VR
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9062: Improve S3 implementation.The S3 implementation is far from finished, this commit focuses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimizations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Please review thoroughly, both code inspection and (automated) integration tests. Currently no integration tests are available specifically for S3. Therefore the implementation is needed to be tested manually, for now...
What I tested:
- Greenfield install -> will download latest systemvm template automatically to S3.
- Upload a template/iso
- Download a template/iso
- Restart of management server -> list available templates -> doesn't download them again if available.
* pr/1083:
CLOUDSTACK-9062: Improve S3 implementation.
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9053 security upgrade as per COLLECTIONS-580
CLOUDSTACK-9055: fix NPE in updating Redundant State of VPC networks
CLOUDSTACK-9057 remove old system vm upgrade code
- Removed regex. based search/replace of sensitive data on API response introduced as part of commit b0c6d47347
- Added new response serializer to skip sensitive data from getting logged based on annotation present in resposne object fields
- Added new parameter 'isSensitive' to @Param for marking a field as sensitive in response objects
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Before change:
cloudmonkey> list vlanipranges keyword=118
: Caught: com.mysql.jdbc.JDBC4PreparedStatement@18f36b6e: SELECT vlan.id, vlan.vlan_id, vlan.vlan_gateway, vlan.vlan_netmask, vlan.ip6_gateway, vlan.ip6_cidr, vlan.data_center_id, vlan.description, vlan.ip6_range, vlan.network_id, vlan.physical_network_id, vlan.vlan_type, vlan.uuid, vlan.removed, vlan.created FROM vlan WHERE ( OR vlan.description LIKE ** NOT SPECIFIED ** ) AND vlan.removed IS NULL ORDER BY vlan.id ASC LIMIT 0, 500
After change:
cloudmonkey> list vlanipranges keyword='118'
count = 1
vlaniprange:
id = 0d80fd9c-cd6b-4f99-96c6-261420e75f58
account = system
domain = ROOT
domainid = 2044762d-c4a5-11e3-8379-005056ac4490
......
generateRandomPassword() is supposed to create root user passwords.
Right now it is only used on the guest VMs. The format of the passwords
it creates are of the form "random 3-character string with a lowercase
character, uppercase character, and a digit" + random n-character string
with only lowercase characters".
For whatever reason it was that we use generateRandomPassword() for
guest VM root user passwords(maybe more secure?) we should use the same
function for system VM root user passwords.
throwing error for value < 8 and value > 256
right now, 8, 256 are hardcoded in the code. They should be moved to a
constant and has to be reused everywhere.
CLOUDSTACK-9006 - ListTemplates API returns result in inconsistent order when called concurrentlyThe order of templates returned in the response is based on a field called sortkey and by default value for the field is set to 0.
With more than 1000 templates, we tried listing the templates with different page sizes concurrently, and we noticed the results being inconsistent.
Thus we added a secondary order by clause to list templates call on tempZonePair column to make sure the results are consistent.
The addOrderby method of Filter class was also not appending , if we added more orderby clauses.
* pr/1009:
CLOUDSTACK-9006 - ListTemplates API returns result in inconsistent order when called concurrently
CLOUDSTACK-9006 - ListTemplates API returns result in inconsistent order when called concurrently
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8902 Restart Network fails in EIP/ELB zoneThe restart network was failing when using external loadbalencer. The failure was because of a number format exception. When BroadcastDomainType.getValue(guestConfig.getBroadcastUri() is executed this returns a string untagged. We were trying to parse this as long so there was a number pointer exception.
This happens only when the vlan uri is vlan://untagged. in other cases were there is a number instead of untagged (vlan tag) this used to succeed. Although we were trying to convert the number to long we were not really using it. we were converting the number to long and then back to string when creating the IpAddressTo. so I removed this unnecessary conversion in this case for fixing the issue at hand.
I did a manual restart of the network and checked for this number format exception in a EIP/ELB setup.
* pr/898:
CLOUDSTACK-89027 Restart Network fails in EIP/ELB zone
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9016 Fail to create VM instance within VPCbug link https://issues.apache.org/jira/browse/CLOUDSTACK-9016.
CS doe not allocate the ip of the form x.x.x.1 to a guest VM. We seem to incorrectly assume that the first ip in the subnet belongs to the gateway.
* pr/1020:
CLOUDSTACK-9016: Deploy vm with gateway ip address in VPC
CLOUDSTACK-9016 Fail to create VM instance within VPC
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACk-9002: VM deployment is successful even when dhcp entry command fails - Fixed
Reason: The return value of the call to accept() function in the applyRules() function of BasicNetworkTopology.java was not checked for success or failure. As a result even if it fails, exception was not thrown and VM deployment went ahead without any errors.
Fix: Added the necessary checks.
* pr/995:
CLOUDSTACk-9002: VM deployment is successful even when dhcp entry command fails - Fixed
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8940: Wrong value is inserted into nics table netmask field when creating a VM - Fixed
Problem: When creating a VM in shared network with no service, the value of netmask is added in the table in the CIDR format unlike other cases where it is added as normal string in the format xxx.xxx.xxx.xxx. The netmask column in the nics table has a length of 15 chars which gets violated if the CIDR exceeds it(Max CIDR length can be 18).
Fix: Before storing the netmask convert from CIDR to native format.
* pr/916:
CLOUDSTACK-8940: Wrong value is inserted into nics table netmask field when creating a VM - Fixed
Signed-off-by: Remi Bergsma <github@remi.nl>
Fixed: Network Update from RVR offering to Standalone offering failsProblem: Moving a RVR network offering to standalone makes the status of VR's as UNKNOWN and Redundant Router marked with YES.
Fix: The network's isRedundant was not getting updated.
* pr/818:
CLOUDSTACK-8844: Network Update from RVR offering to Standalone offering fails - Fixed
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8793 Enable s2s VPN connection for projects
* pr/879:
CLOUDSTACK-8793 Added project id to create vpn customer gateway, and to the impl of list vpn connections and list vpn customer gateways
Signed-off-by: Remi Bergsma <github@remi.nl>
Pass LbProtocol down to the HAProxyConfiguratorThis will let us specify a new load balancer protocol (tcp-proxy) which enables HAProxy's `send-proxy` functionality.
`send-proxy` / [the PROXY protocol][1] will send the real connection origin IP through to the servers behind HAProxy, without requiring any protocol specific changes (such as HTTP header rewriting).
[1]: http://www.haproxy.org/download/1.5/doc/proxy-protocol.txt
This is also inline with what [Amazon ELB now supports][2].
[2]: http://docs.aws.amazon.com/ElasticLoadBalancing/latest/DeveloperGuide/enable-proxy-protocol.html
* pr/848:
Pass LbProtocol down to the HAProxyConfigurator
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8962: Dedicated cluster is used for virtual routers that belong to non-dedicated account
Earlier the deployment planner was not handling the case of virtual routers.(In Explicit Dedication)
It was only handling for all instance VMs/user VMs.
Added code for checking the case of Virtual Routers.
* pr/945:
CLOUDSTACK-8962: Dedicated cluster is used for virtual routers that belong to non-dedicated account
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8911: VM start job got stuck in loop looking for suitable host
VM instance creation job get stuck in the loop, when VMs require local storage there are host that reached max guest limit and remain hosts does have storage available. This happens because the hosts that reach the max guest limit were not getting added to the avoid list and hence the cluster.
Verified the fix on my local setup.
Repro Steps:
1. Take an environment with single cluster and 2 hosts.
2. change the max guest limit for the hypervisor such that on one host max guest limit should reach.
3. change thresholds so that other host should not have enough storage. If required create a VM for sufficient bigger disk.
4. Now deploy a VM with local storage.
5. cluster will never be put in the avoid set and job will keep looking for suitable host.
6. once we increase the max guest limit, VM will deploy or will fail if there is a lack of storage.
* pr/895:
CLOUDSTACK-8911: VM start job got stuck in loop looking for suitable host
Signed-off-by: Remi Bergsma <github@remi.nl>
Cloudstack-8816 some of the events do not have resource uuidsThe key objects in the context map are sometimes String and sometimes object. This causes missing uuids when an entity put in the context map with key entity.toString is queried with key entity
Testing:
manually tested by deploying a vm and checked that the created events in rabbitmq now has uuids.
events before and after the change are update at https://issues.apache.org/jira/browse/CLOUDSTACK-8816?focusedCommentId=14805239
unittests
```
$ mvn -pl :cloud-api test -Dtest=CallContextTest
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running org.apache.cloudstack.context.CallContextTest
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.152 sec - in org.apache.cloudstack.context.CallContextTest
Results :
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 11.445 s
[INFO] Finished at: 2015-09-18T14:58:53+05:30
[INFO] Final Memory: 55M/448M
[INFO] ------------------------------------------------------------------------
```
* pr/849:
CLOUDSTACK-8816 added missing events
CLOUDSTACK-8816: fixed missing resource uuid in delete network cmd
CLOUDSTACK-8816: fixed missing resource uuid in destroy vm event
Cloudstack-8816: Fixed missing resource uuid in delete snapshot events
CLOUDSTACK-8816: some of the events do not have resource uuids
CLOUDSTACK-8816: some of the events do not have resource uuids
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8917 : Instance tab takes long time to load with 12K Vmsmodified sql that is used for retrieving vm count .
In load test environment listVirtualmachine takes 8-11 sec to load. This environment has around 12k active VMs. Total number of rows is 190K.
Performance bottleneck in listVirtualmachine command is fetching the count and distinct vms.
{noformat}
// search vm details by ids
Pair<List<UserVmJoinVO>, Integer> uniqueVmPair = _userVmJoinDao.searchAndCount(sc, searchFilter);
Integer count = uniqueVmPair.second();
{noformat}
This takes 95% of the total time.
To fetch the count and distinct vms we are using below sqls.
Query 1:
{noformat}
SELECT DISTINCT(user_vm_view.id) FROM user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL ORDER BY user_vm_view.id ASC LIMIT 0, 20
{noformat}
Query 2:
select count(distinct id) from user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL
Query 2 is a problematic query.
If we rewrite the query as mentioned below then it will be ~2x faster.
select count(*) from (select distinct id from user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL) as temp;
Mysql Test result:
With 134 active Vms (total rows 349)
mysql> select count(*) from vm_instance;
+----------+
| count(*) |
+----------+
| 349 |
+----------+
1 row in set (0.00 sec)
mysql> select count(*) from user_vm_view;
+----------+
| count(*) |
+----------+
| 135 |
+----------+
1 row in set (0.02 sec)
mysql> select count(distinct id) from user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL;
+--------------------+
| count(distinct id) |
+--------------------+
| 134 |
+--------------------+
1 row in set (0.02 sec)
mysql> select count(*) from (select distinct id from user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL) as temp;
+----------+
| count(*) |
+----------+
| 134 |
+----------+
1 row in set (0.01 sec)
With 14326 active Vms (total rows 195660)
mysql> select count(*) from vm_instance;
+----------+
| count(*) |
+----------+
| 195660 |
+----------+
1 row in set (0.04 sec)
mysql> select count(*) from user_vm_view;
+----------+
| count(*) |
+----------+
| 41313 |
+----------+
1 row in set (4.55 sec)
mysql> select count(distinct id) from user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL;
+--------------------+
| count(distinct id) |
+--------------------+
| 14326 |
+--------------------+
1 row in set (7.39 sec)
mysql> select count(*) from (select distinct id from user_vm_view WHERE user_vm_view.account_type != 5 AND user_vm_view.display_vm = 1 AND user_vm_view.removed IS NULL) as temp;
+----------+
| count(*) |
+----------+
| 14326 |
+----------+
1 row in set (2.08 sec)
UI test Results:
Before:
After
* pr/894:
CLOUDSTACK-8917 : Instance tab takes long time to load with 12K active VM (total vms: 190K)
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
Primary Storage count for an account does not decrease when a Data Disk
is deleted belonging to the account unless the VM to which volume
belonged is destroyed
The resource counts are updated even before the disk is actually deleted
resulting in the same value.
Moved the resource counts updation to after the expunge operation as
thats when the disk is actually deleted.
all the tests in test/integration/component/test_ps_limits.py now pass
CLOUDSTACK-8964: Can't create template or volume from snapshot on KVM
* pr/954:
CLOUDSTACK-8964: Can't create template or volume from snapshot
Signed-off-by: Remi Bergsma <github@remi.nl>
uuid is missing in the first event of VM create as the entity is just
created and never put in the Context.
Added the entity uuid to context on successful creation.
This issue happens on KVM.
Normally the SSVM will process the CopyCommand from snapshot to template.
However, Ovm3HypervisorGuru chooses a KVM hypervisor to process the CopyCommand.
This is obviously wrong.
The labeling was broken. Only labels assigned at zone creation
were used, changing labels was not working. Tested with changing
a label and checking it.
As a bonus fixed the consistency of KVM in Dutch compared to other
traffic labels in dutch and copied in the OVM3 translated label
in other languages.
Earlier the deployment planner was not handling the case of virtual routers.(In Explicit Dedication)
It was only handling for all instance VMs/user VMs.
Added code for checking the case of Virtual Routers.
- The default is Accept and will be changed based on the configuration of the offering.
CLOUDSTACK-8934 - The default egress is set as Deny in the router.
- We had to change it on the Java side in order to make the apply it once the default is defined as allowed on the net offering
CLOUDSTACK-8864: Not able to add TCP port forwarding rule in VPN for specific ports
Setting port forwarding rules for port 500,1701 and 4500 after enabling VPN, gives the error message "The range specified, xxxx, conflicts with rule xxxx which has xxxx." This happens because the rules added for vpn doesn't have a matching condition to allow port forwarding rules.
Added a unit test to verify the detectRulesConflict function of FirewallManagerImpl.
* pr/851:
CLOUDSTACK-8864: Not able to add TCP port forwarding rule in VPN for specific ports
Signed-off-by: Remi Bergsma <github@remi.nl>
Summary: listVolumes API fails when volume associated vm instance has NULL or invalid state. Fix the code to guard this situation since this should not block volume listing.
CLOUDSTACK-8834: Fixed unable to download Template , when in multi zonesWe were listing image stores by zone id which was resulting in listing of only one image store
If in that image store its download state is not DOWNLOADED then download template is failing
* pr/804:
CLOUDSTACK-8834: Fixed unable to download Template , when in multi zones We were listing image stores by zone id which was resulting in listing of only one image store If in that image store its download state is not DOWNLOADED then download template is failing
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Cloudstack 8816 entityuuid missing in some of the eventsIn some of the events generated, entity uuid was missing making it difficult to find the entity. Fixed the same.
Tested it on rabbitmq instance.
There are the events before after the fix:
Before
--------------------------------------------------------------------------------
routing_key: management-server.ActionEvent.ACCOUNT-DELETE.Account.*
exchange: cloudstack-events
message_count: 2
payload:
{"eventDateTime":"2015-09-04 17:59:24 +0530","status":"Scheduled","description":"deleting User test4 (id: 28) and accountId \u003d 28","event":"ACCOUNT.DELETE","Account":"c09e2e81-8edc-4c27-b072-25005b522b63","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 304
payload_encoding: string
redelivered: False
--------------------------------------------------------------------------------
routing_key: management-server.AsyncJobEvent.complete.Account.*
exchange: cloudstack-events
message_count: 0
payload: {"cmdInfo":"{\"id\":\"9dd3abc2-3f8b-4852-aa60-a74b234acb13\",\"response\":\"json\",\"sessionkey\":\"5ig1ItP2_5v-mgY4cVJbJN5hw_w\",\"ctxDetails\":\"
{\\\"interface com.cloud.user.Account\\\":\\\"9dd3abc2-3f8b-4852-aa60-a74b234acb13\\\"}
\",\"cmdEventType\":\"ACCOUNT.DELETE\",\"expires\":\"2015-09-07T11:11:56+0000\",\"ctxUserId\":\"2\",\"signatureversion\":\"3\",\"httpmethod\":\"GET\",\"uuid\":\"9dd3abc2-3f8b-4852-aa60-a74b234acb13\",\"ctxAccountId\":\"2\",\"ctxStartEventId\":\"447\"}","instanceType":"Account","jobId":"5004989d-0cde-4922-8afa-66bf38b75ea7","status":"SUCCEEDED","processStatus":"0","commandEventType":"ACCOUNT.DELETE","resultCode":"0","command":"org.apache.cloudstack.api.command.admin.account.DeleteAccountCmd","jobResult":"org.apache.cloudstack.api.response.SuccessResponse/null/
{\"success\":true}
","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 914
payload_encoding: string
redelivered: False
--------------------------------------------------------------------------------
After
--------------------------------------------------------------------------------
routing_key: management-server.ActionEvent.ACCOUNT-DELETE.Account.e5e2db91-414d-484c-99d5-c4e265c14ad8
exchange: cloudstack-events
message_count: 13
payload: {"eventDateTime":"2015-09-07 17:32:26 +0530","status":"Completed","description":"Successfully completed deleting account. Account Id: 45","event":"ACCOUNT.DELETE","entityuuid":"e5e2db91-414d-484c-99d5-c4e265c14ad8","entity":"com.cloud.user.Account","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 344
payload_encoding: string
redelivered: True
--------------------------------------------------------------------------------
routing_key: management-server.AsyncJobEvent.complete.Account.e5e2db91-414d-484c-99d5-c4e265c14ad8
exchange: cloudstack-events
message_count: 12
payload: {"cmdInfo":"{\"id\":\"e5e2db91-414d-484c-99d5-c4e265c14ad8\",\"response\":\"json\",\"sessionkey\":\"8AJVbn8HIpg5LZ_VaVfSPs_QN2k\",\"ctxDetails\":\"{\\\"interface com.cloud.user.Account\\\":\\\"e5e2db91-414d-484c-99d5-c4e265c14ad8\\\"}\",\"cmdEventType\":\"ACCOUNT.DELETE\",\"expires\":\"2015-09-07T12:17:42+0000\",\"ctxUserId\":\"2\",\"signatureversion\":\"3\",\"httpmethod\":\"GET\",\"uuid\":\"e5e2db91-414d-484c-99d5-c4e265c14ad8\",\"ctxAccountId\":\"2\",\"ctxStartEventId\":\"465\"}","instanceType":"Account","instanceUuid":"e5e2db91-414d-484c-99d5-c4e265c14ad8","jobId":"0bb08486-6d9f-4e9f-bfef-b7463c42e71b","status":"SUCCEEDED","processStatus":"0","commandEventType":"ACCOUNT.DELETE","resultCode":"0","command":"org.apache.cloudstack.api.command.admin.account.DeleteAccountCmd","jobResult":"org.apache.cloudstack.api.response.SuccessResponse/null/{\"success\":true}","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 968
payload_encoding: string
redelivered: True
--------------------------------------------------------------------------------
* pr/782:
CLOUDSTACK-8816 Systemvm reboot event doesnt have uuids. Fixed the same
CLOUDSTACK-8816: Project UUID is not showing for some of operations in RabbitMQ.
CLOUDSTACK-8816: entity uuid missing in create network event
CLOUDSTACK-8816: instance uuid is missing in events for delete account
CLOUDSTACK-8816 Fixed entityUuid missing in some cases is events
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
We were listing image stores by zone id which was resulting in listing of only one image store
If in that image store its download state is not DOWNLOADED then download template is failing
CLOUDSTACK-8814 - Refactoring the configuration of Routers and VPC routers nicsHi there,
I refactored the configureDefaultNics() method in order to split the implementations for Routers and VPC Routers.
The following tests were executed:
* test_vm_life_cycle
* test_routers
* test_vpc_router_nics
* test_vpc_routers
* test_vpc_offerings
@remibergsma @bhaisaab @koushik-das @miguelaferreira @DaanHoogland @karuturi , could you please have a look/test this PR?
Thanks in advance.
Cheers,
Wilder
* pr/788:
CLOUDSTACK-8814 - Refactoring the configuration of Routers and VPC routers nics
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
context parameters is Map<object,Object>. This has been used
interchangeably with String and class object resulting the param value
not being available in some cases if its put with object and get with
class.forName()
made the put and get consistent by using Object as key everywhere.
CLOUDSTACK-8727: API call listVirtualMachines returns same keypairCurrently the user can register same key with different names. Upon listing the VM's the name which got registered first is being returned and not the actual one. Anyhow this behavior is rare and not good. I have added a UNIQUE constraint on the ssh_keypairs table and also made sure that the previous registered keys(with duplicates) get deleted.
* pr/685:
CLOUDSTACK-8727: API call listVirtualMachines returns same keypair: Corrected and test cases added
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
config: doc: add default value 10 in description for vm.network.nic.max.secondary.ipaddresses
value hardcoded by commit 4925b9f6a1
* pr/777:
config: doc: add default value 10 in description for vm.network.nic.max.secondary.ipaddresses
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8759 - Destroying VPC router results in a new unusable VPC routerHow to reproduce the problem:
1. Stop/Destroy the VPC router
2. Add a virtual machine to one of the VPC tier - it will trigger a VPC router creation
3. Router is created, but the NICs are not configured
How to recover without this fix:
1. Stop/destroy the VPC router and restart the VPC
Side effects: private gateways could be misconfigured.
Root cause:
In the VpcNetworkHelperImpl.configureDefaultNics() method, the guest network nic was added in the map prior to the control and public NICs. The order in the map should not matter, however in the LibvirtComputingResource.createVifs() method, there is a logic that relies on the device index - the array index - in order to create the control nic. I advise a refactor on the data model in order to be able to identify the NIC type instead of relying in the array index.
An integration test was added to cover the fix:
* test_vpc_router_nics.py
Environment:
Management Server running on CentOS 7.1
KVM host running on CentOS 7.1
CloudStack Agent/Common 4.6.0-SNAPSHOT
Executing the test:
```
nosetests --with-marvin --marvin-config=/data/shared/marvin/mct-zone2-kvm2-ISOLATED.cfg -s -a tags=advanced,required_hardware=true component/test_vpc_router_nics.py
```
Remark: during the SSH there might be stack traces on the console due to the connection retry. It takes some time to get the PF rules in place and reach the VMs. So, just let the test run until the end.
```
Test results:
Create a vpc with two networks with two vms in each network ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 774.020s
OK
/tmp//MarvinLogs/test_vpc_router_nics_VH6E9S/results.txt (END)
```
* pr/773:
CLOUDSTACK-8759 - Fix guets nic allocation
CLOUDSTACK-8759 - Adding a marvin test in order to cover the fix
CLOUDSTACK-8759 - The guest nic has to be added after the control nic
Signed-off-by: Remi Bergsma <github@remi.nl>
Cloudstack:8647 LDAP Trust AD and AutoimportToday, CloudStack can automatically import LDAP users based on the configuration to a domain or an account. However, any new users in LDAP aren't automatically reflected. The admin has to manually import them again.
This feature enables admin to map LDAP group/OU to a CloudStack domain and any changes are reflected in ACS as well.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/WIP%3A+LDAP%3A+Trust+AD+and+Auto+Import
testcases output:
```
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running groovy.org.apache.cloudstack.ldap.NoLdapUserMatchingQueryExceptionSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.216 sec - in groovy.org.apache.cloudstack.ldap.NoLdapUserMatchingQueryExceptionSpec
Running groovy.org.apache.cloudstack.ldap.LdapManagerImplSpec
log4j:WARN No appenders could be found for logger (org.apache.cloudstack.ldap.LdapManagerImpl).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info.
using type:
using type: null
using type: TEST
using type: TEST TEST
using name:
using name: null
using accountType: -1
using accountType: 1
using accountType: 3
using accountType: 4
using accountType: 5
using accountType: 6
using accountType: 20000
using accountType: -500000
Tests run: 29, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.387 sec - in groovy.org.apache.cloudstack.ldap.LdapManagerImplSpec
Running groovy.org.apache.cloudstack.ldap.LdapListUsersCmdSpec
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.041 sec - in groovy.org.apache.cloudstack.ldap.LdapListUsersCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapAddConfigurationCmdSpec
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.019 sec - in groovy.org.apache.cloudstack.ldap.LdapAddConfigurationCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapUserSpec
Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.021 sec - in groovy.org.apache.cloudstack.ldap.LdapUserSpec
Running groovy.org.apache.cloudstack.ldap.LdapAuthenticatorSpec
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.082 sec - in groovy.org.apache.cloudstack.ldap.LdapAuthenticatorSpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationVOSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.004 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationVOSpec
Running groovy.org.apache.cloudstack.ldap.OpenLdapUserManagerSpec
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.094 sec - in groovy.org.apache.cloudstack.ldap.OpenLdapUserManagerSpec
Running groovy.org.apache.cloudstack.ldap.LdapDeleteConfigurationCmdSpec
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.008 sec - in groovy.org.apache.cloudstack.ldap.LdapDeleteConfigurationCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapUserResponseSpec
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.01 sec - in groovy.org.apache.cloudstack.ldap.LdapUserResponseSpec
Running groovy.org.apache.cloudstack.ldap.LdapUserManagerFactorySpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.027 sec - in groovy.org.apache.cloudstack.ldap.LdapUserManagerFactorySpec
Running groovy.org.apache.cloudstack.ldap.ADLdapUserManagerImplSpec
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.012 sec - in groovy.org.apache.cloudstack.ldap.ADLdapUserManagerImplSpec
Running groovy.org.apache.cloudstack.ldap.LdapCreateAccountCmdSpec
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.168 sec - in groovy.org.apache.cloudstack.ldap.LdapCreateAccountCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapImportUsersCmdSpec
Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.063 sec - in groovy.org.apache.cloudstack.ldap.LdapImportUsersCmdSpec
Running groovy.org.apache.cloudstack.ldap.LinkDomainToLdapCmdSpec
Tests run: 5, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.019 sec - in groovy.org.apache.cloudstack.ldap.LinkDomainToLdapCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapSearchUserCmdSpec
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.011 sec - in groovy.org.apache.cloudstack.ldap.LdapSearchUserCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapListConfigurationCmdSpec
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.01 sec - in groovy.org.apache.cloudstack.ldap.LdapListConfigurationCmdSpec
Running groovy.org.apache.cloudstack.ldap.NoSuchLdapUserExceptionSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.005 sec - in groovy.org.apache.cloudstack.ldap.NoSuchLdapUserExceptionSpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationResponseSpec
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.006 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationResponseSpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationSpec
asserting for provider configuration: openldap
asserting for provider configuration: microsoftad
asserting for provider configuration:
asserting for provider configuration:
asserting for provider configuration: xyz
asserting for provider configuration: MicrosoftAd
asserting for provider configuration: OpenLdap
asserting for provider configuration: MicrosoftAD
Tests run: 19, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.053 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationSpec
Running groovy.org.apache.cloudstack.ldap.LdapContextFactorySpec
Tests run: 5, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.099 sec - in groovy.org.apache.cloudstack.ldap.LdapContextFactorySpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationDaoImplSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.027 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationDaoImplSpec
Running groovy.org.apache.cloudstack.ldap.LdapUtilsSpec
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.01 sec - in groovy.org.apache.cloudstack.ldap.LdapUtilsSpec
Results :
Tests run: 156, Failures: 0, Errors: 0, Skipped: 0
```
* pr/755:
CLOUDSTACK-8647: linkdomaintoldap shouldnt fail when createuseraccount fails
CLOUDSTACK-8647 removed duplicate key in create sql of ldap_trust_map
CLOUDSTACK-8647: string formatting
CLOUDSTACK-8647: updated with review comments
CLOUDSTACK-8647: unittests for LdapAuthenticatorSpec
CLOUDSTACK-8647: formatted LdapAuthenticatorSpec
CLOUDSTACK-8647: UI for trust AD feature
CLOUDSTACK-8647 added unittests for new methods in ldapmanager
CLOUDSTACK-8647 unittests for LinkDomainToLdap api command
CLOUDSTACK-8647: fixed unittests
CLOUDSTACK-8647 support for assigning and admin to linked ldap domain
CLOUDSTACK-8647 added nested group enabled config in ldap
CLOUDSTACK-8647 added account_type to the linkDomainToLdap API
CLOUDSTACK-8647 changed the authentication flow
CLOUDSTACK-8647 added new api linkLdapToDomain
CLOUDSTACK-8647: added cmd and response class for the new api
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
- When stopping/detroying a VPC router and creating a new one via the addition os a VM, the networks are no plugged correctly
- The ETH1 ends up with the IP of the guest nic, which remains down. This causes routes problems and the VMs are not reachable via the pub IPs
- The test will create a VPC, add 2 tier, 2 VMs, ACL, PF and SSH into the VM
- Then it will stop the router, destroy the router, add another VM to 1 tier and check that we can reach all the VMs
Guys, can you review it? things need to be discussed:
(1) this supports KVM/QCOW2 only. Anyone want to implement for other Hypervisor/format ?
(2) The original data volume (on primary storage) will be removed.
(3) The script uses the default timeout in libvirtComputingResource. Do we need to add one in global configuration (like copy.volume.wait or backup.snapshot.wait, create.volume.from.snapshot.wait)
(4) In scripts/storage/qcow2/managesnapshot.sh, I use "qemu-img convert -f qcow2 -O qcow2" to copy the snapshot from secondary to primary (hence there is no base image file), instead of "cp -f", this is because convert is faster than cp in my testing.
* pr/732:
CLOUDSTACK-5863: revert volume snapshot for KVM/QCOW2
Signed-off-by: Wei Zhou <w.zhou@tech.leaseweb.com>
CLOUDSTACK-8785: Proper enforcement of retry count (max.retries) for all work type handled by HighAvailability manager
Retry count is properly enforced for all work types in HA manager. Also reorganized some of the code for easy testing.
Signed-off-by: Koushik Das <koushik@apache.org>
Made following fixes in simulator
- Support for ScaleVmCommand/NetworkRulesVmSecondaryIpCommand in resource layer
- Added support for scaling up a running VM in simulator
- Fixed some method names not following convention
In order to test PR #725 using simulator some of these changes are needed.
Based on the way HV check is present in the scale VM API, had to explicitly put simulator related check to allow support. The ideal way would be to remove all these HV specific check from code and made them some configuration (by putting them in hypervisor_capabilities table in DB). But that will be a bigger effort outside the scope of this PR.
Signed-off-by: Koushik Das <koushik@apache.org>
This reverts commit cd7218e241, reversing
changes made to f5a7395cc2.
Reason for Revert:
noredist build failed with the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.2:compile (default-compile) on project cloud-plugin-hypervisor-vmware: Compilation failure
[ERROR] /home/jenkins/acs/workspace/build-master-noredist/plugins/hypervisors/vmware/src/com/cloud/hypervisor/guru/VMwareGuru.java:[484,12] error: non-static variable logger cannot be referenced from a static context
[ERROR] -> [Help 1]
even the normal build is broken as reported by @koushik-das on dev list
http://markmail.org/message/nngimssuzkj5gpbz
CLOUDSTACK-8721: Fixed Setting details of VM through API results in removal of all other details except the one passed in API
* pr/673:
CLOUDSTACK-8721: Fixed Setting details of VM through API results in removal of all other details except the one passed in API
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Support for ScaleVmCommand/NetworkRulesVmSecondaryIpCommand in resource layer
- Added support for scaling up a running VM in simulator
- Fixed some method names not following convention
Fix for the NicVO.java regression.Renamed set*() methods to correct naming.
* pr/726:
Fix for the NicVO.java regression.
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8687: Prepare template only on a given storage poolUpdate prepare template api to seed/prepare a template only on a given primary storage. Currently, the prepare template api will seed/prepare a given template on all the primary storage pools in a zone. If however, a user wishes to prepare a template only a particular storage pool, it isn't possible. Updated the api to take storage pool id as an optional parameter. If the pool id is provided then the template is prepared only on the given primary storage pool. Also added unit tests to validate the functionality
* pr/715:
CLOUDSTACK-8687: Unit tests for validating the prepare template functionality. These tests validate that the templates get scheduled for seeding. Additionally, if a template is already seeded, we do not try and seed it again. Tests also validate that templates are seeded to storage pools which are available.
CLOUDSTACK-8687: Update prepare template api to seed/prepare a template only on a given primary storage. Currently, the prepare template api will seed/prepare a given template on all the primary storage pools in a zone. If however, a user wishes to prepare a template only a particular storage pool, it isn't possible. Updated the api to take storage pool id as an optional parameter. If the pool id is provided then the template is prepared only on the given primary storage pool
Signed-off-by: Rajani Karuturi <rajanikaruturi@gmail.com>
Refactored Nic.java for readability.Only changed names and reorganized them! No functional implementation change.
See issue CLOUDSTACK-8736 for ongoing effort to clean up network code.
* pr/707:
Renamed internal variables of NicProfile.java to adhere to the naming convention.
Refactored Nic.java for readability.
Signed-off-by: Rajani Karuturi <rajanikaruturi@gmail.com>
These tests validate that the templates get scheduled for seeding. Additionally,
if a template is already seeded, we do not try and seed it again. Tests also
validate that templates are seeded to storage pools which are available.
only on a given primary storage. Currently, the prepare template api
will seed/prepare a given template on all the primary storage pools in
a zone. If however, a user wishes to prepare a template only a
particular storage pool, it isn't possible. Updated the api to take
storage pool id as an optional parameter. If the pool id is provided
then the template is prepared only on the given primary storage pool
Changed methodnames according to Nic.java refactor.
Fixed NicVO.java due to regression from Nic.java refactor.
Fixed VmWareGuru.java after Nic.java refactor.
See issue CLOUDSTACK-8736 for ongoing effort to clean up network code.
Refactored NicProfile.java for readability.Only changed names and reorganized them! No functional implementation change.
See issue CLOUDSTACK-8736 for ongoing effort to clean up network code.
* pr/705:
Refactored NicProfile.java for readability.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Cloudstack 8656: do away with more silently ignoring exceptions.a lot of messages added.
some restructuring for test exception assertions and try-with-resource blocks
* pr/654: (29 commits)
CLOUDSTACK-8656: more logging instead of sysout
CLOUDSTACK-8656: use catch block for validation
CLOUDSTACK-8656: class in json specified not found
CLOUDSTACK-8656: removed unused classes
CLOUDSTACK-8656: restructure of tests
CLOUDSTACK-8656: reorganise sychronized block
CLOUDSTACK-8656: restructure tests to ensure exception throwing
CLOUDSTACK-8656: validate the throwing of ServerApiException
CLOUDSTACK-8656: logging ignored exceptions
CLOUDSTACK-8656: try-w-r removes need for empty catch block
CLOUDSTACK-8656: try-w-r instead of clunckey close-except
CLOUDSTACK-8656: deal with empty SQLException catch block by try-w-r
CLOUDSTACK-8656: unnecessary close construct removed
CLOUDSTACK-8656: message about timed buffer logging
CLOUDSTACK-8656: message about invalid number from store
CLOUDSTACK-8656: move cli test tool to separate file
CLOUDSTACK-8656: exception is the rule for some tests
CLOUDSTACK-8656: network related exception logging
CLOUDSTACK-8656: reporting ignored exceptions in server
CLOUDSTACK-8656: log in case we are on a platform not supporting UTF8
...
Signed-off-by: Remi Bergsma <github@remi.nl>
Interface changes related to CLOUDSTACK-8580See issue CLOUDSTACK-8580 and individual commits.
* pr/680:
Made interface changes related to CLOUDSTACK-8580
Signed-off-by: Remi Bergsma <github@remi.nl>
Added responses to ListCapabilities to reflect CLOUDSTACK-8580 changes.
This to add these options to the gui. See issue CLOUDSTACK-8580.
3be14e978a
Removed comments as proposed by Daan Hoogland.
See issue CLOUDSTACK-8133 for more information.
Added null check by comment of Koushik Das.
Added brackets by comment of Wido den Hollander.
Removed a call to findById() by comment of Koushik Das.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Implemented condition that only admin or owner of the template can change its permissions ..... using updateTemplatePermissions API
Consider this scenario :
In a domain, there are three User Accounts UA1, UA2,UA3
A private template is registered by UA1
Through the updateTemplatePermissions API, UA1 gives permission to both UA2 and UA3
Now, UA2, having been shared the template, can remove the permission of UA3(or add permissions to another account).
EXPECTED BEHAVIOR :
UA2 should not be able to to add/remove permissions of other accounts.
* pr/658:
Implemented condition that only admin or owner of the template can change its permissions using updateTemplatePermissions API
Signed-off-by: Remi Bergsma <github@remi.nl>
* pr/547:
CLOUDSTACK-8601. VMFS storage added as local storage can be re-added as shared storage. Fail addition of a VMFS shared storage pool in case it has already been added as local storage in CS.
Signed-off-by: Mike Tutkowski <mike.tutkowski@solidfire.com>
CLOUDSTACK-8704: Schedule restart of router VMs ahead of user VMs as part of HA
VRs are scheduled for HA ahead of user VMs.
Refer to the bug for more details.
* pr/656:
CLOUDSTACK-8704: Schedule restart of router VMs ahead of user VMs as part of HA VRs are scheduled for HA ahead of user VMs
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8711: public_ip type resource count for an account is not decremented upon IP range deletionProblem:
--------------------------
When you add an IP range and associate it to an account then resource count of public_ip will be updated to the range length.
After some time try to delete this range and the resource count of public_up for this account is not descremented and is causing account not to add any more public IPs to it once it reaches the resource limit.
RCA:
----------------
We were not decrement the count while deleting the IP range that was associated to an account.
Fix:
-------------
Up on deletion we are decrementing the resource count for public_up now.
* pr/662:
Bug-Id: CS-27335: public_ip type resource count for an account is not decremented upon IP range deletion
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8709 No out of band migrate alert for non-routers
* pr/666:
CLOUDSTACK-8709 No out of band migrate alert for non-routers
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8714 Restore VM (Re-install VM) with enable.storage.migration set to false fails
* pr/659:
Bug-ID:CS-27160: Restore VM (Re-install VM) with enable.storage.migration set to false fails, later fails to start up VM too
Signed-off-by: Remi Bergsma <github@remi.nl>
Reviewed-By: Anthony
Changes:
- Try to reuse the storage pools for READY disks if the pool fits the deployment plan
- Try to use the last_host if it has free capacity but no reserved capacity
Signed-off-by: Maneesha.P <maneesha.papireddygari@citrix.com>
Instead of putting the host to Alert state immediately, the investigators should be allowed to run for some time based on alert.wait global config.
At the end of this interval if the host state still cannot be determined then put the host in Alert. Also updated some of the log messages.
This closes#621
Also change the logging a bit so that you get useful logs when
not running on DEBUG level
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This closes#580
If SSVM cannot be started then the existing entry is removed and a new SSVM gets created. Made similar changes for CPVM as well.
Also cleaned up some log messages in SSVM and CPVM manager code.
- Login is based on sessionkey HttpOnly Cookie
- ApiServlet does login verification using sessionKey from both the request cookies
and the API parameters. In both cases, if either or both are passed they should
match the sessionKey stored in the current session of the HttpRequest
- UI: it no longer needs to read or set sessionkey cookie
- UI: it no longer needs to return g_sessionKey value in the API requests, though
to support a sso mechanism g_sessionKey is still passed in the API is not null
- Secure jsessionid cookie is set to be HttpOnly and Secure
- SAML login should also set HttpOnly cookie before redirecting to UI
- SAML: listIdps & getSPMetadata APIs are readonly now, won't log out a logged in user
Performed tests (login, saml login if applicable, page refreshes, opening
multiple tabs, logout) with following combinations:
- SAML disabled, normal auth as admin, domain-admin and user
- SAML enabled, normal auth as admin, domain-admin and user; and saml sso as
admin, domain-admin and user
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#574
This closes#308
- Make sure the new password replaces the old one in the queue
- Updated the patch files for XenServer
- Updated the script path on LibvirtComputing class
- Adding update_host_passwd to VRScripts
- Add implementation to CitrixUpdateHostPasswordCommandWrapper
- Improve testUpdateHostPasswordCommand() unit test on CitrixRequestWrapperTest
- Adding update_host_passwd.sh script
- Adding the host IP address as an instance variable on UpdateHostPasswordCommand
- Improving the Unit Test (LibvirtComputingResourceTest) to get it covering the new code
- Make sure doUpdateHostPassword() doesn't get called if flag is set to false
- Do not update XenServer hosts if the cluster ID is not informed
This closes#559
- Changed location of the update_host_passwd script
- Updated the patch files for XenServer
- Updated the script path on LibvirtComputing class
- Removed the hostIP from the LibvirtUpdateHostPasswordCommandWrapper execute() method
listing the hosts for migration for instance with tag
While preparing the suitable hosts we are accidentally removing the
incompatible (host does not have host tag) hosts from otherhost list(
incorrect use of List.retainAll).
- Modifying the LibvirtUpdateHostPasswordCommandWrapper in order to execute the script on the host
- Adding the script path to LibvirtComputingResource
- Adding the host IP address as an instance variable on UpdateHostPasswordCommand
- Improving the Unit Test (LibvirtComputingResourceTest) to get it covering the new code
* Move config options to SAML plugin
This moves all configuration options from Config.java to SAML auth manager. This
allows us to use the config framework.
* Make SAML2UserAuthenticator validate SAML token in httprequest
* Make logout API use ConfigKeys defined in saml auth manager
* Before doing SAML auth, cleanup local states and cookies
* Fix configurations in 4.5.1 to 4.5.2 upgrade path
* Fail if idp has no sso URL defined
* Add a default set of SAML SP cert for testing purposes
Now to enable and use saml, one needs to do a deploydb-saml after doing a deploydb
* UI remembers login selections, IDP server
- CLOUDSTACK-8458:
* On UI show dropdown list of discovered IdPs
* Support SAML Federation, where there may be more than one IdP
- New datastructure to hold metadata of SP or IdP
- Recursive processing of IdP metadata
- Fix login/logout APIs to get new interface and metadata data structure
- Add org/contact information to metadata
- Add new API: listIdps that returns list of all discovered IdPs
- Refactor and cleanup code and tests
- CLOUDSTACK-8459:
* Add HTTP-POST binding to SP metadata
* Authn requests must use either HTTP POST/Artifact binding
- CLOUDSTACK-8461:
* Use unspecified x509 cert as a fallback encryption/signing key
In case a IDP's metadata does not clearly say if their certificates need to be
used as signing or encryption and we don't find that, fallback to use the
unspecified key itself.
- CLOUDSTACK-8462:
* SAML Auth plugin should not do authorization
This removes logic to create user if they don't exist. This strictly now
assumes that users have been already created/imported/authorized by admins.
As per SAML v2.0 spec section 4.1.2, the SP provider should create authn requests using
either HTTP POST or HTTP Artifact binding to transfer the message through a
user agent (browser in our case). The use of HTTP Redirect was one of the reasons
why this plugin failed to work for some IdP servers that enforce this.
* Add new User Source
By reusing the source field, we can find if a user has been SAML enabled or not.
The limitation is that, once say a user is imported by LDAP and then SAML
enabled - they won't be able to use LDAP for authentication
* UI should allow users to pass in domain they want to log into, though it is
optional and needed only when a user has accounts across domains with same
username and authorized IDP server
* SAML users need to be authorized before they can authenticate
- New column entity to track saml entity id for a user
- Reusing source column to check if user is saml enabled or not
- Add new source types, saml2 and saml2disabled
- New table saml_token to solve the issue of multiple users across domains and
to enforce security by tracking authn token and checking the samlresponse for
the tokens
- Implement API: authorizeSamlSso to enable/disable saml authentication for a
user
- Stubs to implement saml token flushing/expiry
- CLOUDSTACK-8463:
* Use username attribute specified in global setting
Use username attribute defined by admin from a global setting
In case of encrypted assertion/attributes:
- Decrypt them
- Check signature if provided to check authenticity of message using IdP's
public key and SP's private key
- Loop through attributes to find the username
- CLOUDSTACK-8538:
* Add new global config for SAML request sig algorithm
- CLOUDSTACK-8539:
* Add metadata refresh timer task and token expiring
- Fix domain path and save it to saml_tokens
- Expire hour old saml tokens
- Refresh metadata based on timer task
- Fix unit tests
This closes#489
(cherry picked from commit 20ce346f3a)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
client/WEB-INF/classes/resources/messages_hu.properties
plugins/hypervisors/xenserver/src/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixCheckHealthCommandWrapper.java
plugins/user-authenticators/saml2/src/org/apache/cloudstack/api/command/SAML2LoginAPIAuthenticatorCmd.java
ui/scripts/ui-custom/login.js
- Make sure the doUpdateHostPassword() method returns the result from the answer, not always true
- Added the LibvirtUpdateHostPasswordCommandWrapper class, which will handle the changes in the KVM agent
That's will be further implemented in the future. The command will avoid the agent to complain about Unsupported command
- Added a test to make sure the current implementation of the comment works
- If changes in the future, it will also require changes. In that way, we make sure nobody will break it
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#527
- 2 years ago a change in that method caused an issue when trying to update the hosts password:
- they would be updated in the databse but not in the host it self, causing the hosts to disconnect after a management server resstart
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
- By doing so the check is simple and will require less effort when adding other hypervisors.
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
- The code was hard to maintain because updating a host or all the hosts in a cluster was handled in the same method
- Created updateHost and updateCluster password in both ResourceManager and ManagementServer interfaces/classes
- The chck for whihc method to use is done in the API level
- Started adding the support for KVM host passwd update
No API changes are needed and it will be backwards compatible.
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
- New implementation uses nanoseconds. Due to that, the places where the Profiler is used as a Monitor and/or
a stopwatch will suffer with the difference in the return
- Also added a getDuration(), which returns the time in nanoseconds in case someone wants to use it instead
- Added an extra test to check if the getDuration() works fine with nanoseconds
- Fixed the test that checks the time in milliseconds: I added an error margin to cover the test better
Signed-off-by: Daan Hoogland <daan@onecht.net>
Removing the previous logic and adding a method to check if the CIDR is 31 bit prefixed
Adding tests for the new method
Signed-off-by: Daan Hoogland <daan.hoogland@gmail.com>
This closes#303
This allows non-root users to add KVM hosts, the user should be an admin or
added to sudoers to execute sudo cloudstack-setup-agent.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Signed-off-by: Remi Bergsma <apache@remi.nl>
This closes#288
(cherry picked from commit d2b0c1a32b)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This allows non-root users to add KVM hosts, the user should be an admin or
added to sudoers to execute sudo cloudstack-setup-agent.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Signed-off-by: Remi Bergsma <apache@remi.nl>
This closes#288
- Changing the implementation of the NetUtils.ipRangesOverlap() a little bit in order to be compliant with RFC 3021
- 2 unit tests added
- ranges from 0 to 255 covered by the tests, which also test the negative cases.
For KVM agent, guid is configurable in agent.properties, this fix allows the
configuration to work by removing string tail (the -LibvirtComputingResource suffix).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#286
(cherry picked from commit 803b946c2f)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
For KVM agent, guid is configurable in agent.properties, this fix allows the
configuration to work by removing string tail (the -LibvirtComputingResource suffix).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#286
We add a new contract to pass Http request to authentication plugin system. In
the default login API, we disallow non-POST requests.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit does not implement new functionality:
* Fixes duplicate parameter in API docs.
* Fixes a bunch of typos.
* Add interfaces to make it easier for the FirewallService interface.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#249
... of new volumes. Following changes are implemented 1. Disable or enable a pool with the
updateStoragePool api. A new 'enabled' parameter added for the same. 2. When a
pool is disabled the state of the pool is updated to 'Disabled' in the db. On
enabling it is updated back to 'Up'. Alert is raised when a pool is disabled or
enabled. 3. Updated other storage providers to also honour the disabled state.
4. A disabled pool is skipped by allocators for provisioing of new volumes. 5.
Since the allocators skip a disabled pool for provisioning of volumes, the
volumes are also not listed as a destination for volume migration.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Disabling+Storage+Pool+for+Provisioning
This closes#257
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMs in transition states - Starting, Stopping, Migrating - are also taken into account for enforcing "max. guest limit"
(cherry picked from commit 3100fc1554)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The PR #211 introduced changes where the abstract investigator testIpAddress()
would return other Status, which previously only returned null, Up or Down. In
this patch we introduce a new Status "Unknown" that replaces null's semantics.
The important changes #211 introduced was the debugging statements as semantically
the changes would work same as the consumers of testIpAddress() method only used
if returned values were Up or Down and in other cases (null, Alert etc) it would
simply continue to loop through the resources being investigated.
Keeping the debug logs, this commit only replaces the previously returned null
values with Status.Unknown and fixed the debug statements to reflect the same.
In case of trapped exceptions too, we return Unknown status but log the exception
we trapped.
server: add null assertions and remove dead code with testIpAddress usage
This closes#222
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 7a1cb28c9f)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The PR #211 introduced changes where the abstract investigator testIpAddress()
would return other Status, which previously only returned null, Up or Down. In
this patch we introduce a new Status "Unknown" that replaces null's semantics.
The important changes #211 introduced was the debugging statements as semantically
the changes would work same as the consumers of testIpAddress() method only used
if returned values were Up or Down and in other cases (null, Alert etc) it would
simply continue to loop through the resources being investigated.
Keeping the debug logs, this commit only replaces the previously returned null
values with Status.Unknown and fixed the debug statements to reflect the same.
In case of trapped exceptions too, we return Unknown status but log the exception
we trapped.
server: add null assertions and remove dead code with testIpAddress usage
This closes#222
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
From b3f18e7d74, the zone level systemvm local
storage setting never worked as it needed to be moved to config depot.
(cherry picked from commit 279efb0432)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/network-elements/internal-loadbalancer/src/org/apache/cloudstack/network/lb/InternalLoadBalancerVMManagerImpl.java
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
From b3f18e7d74, the zone level systemvm local
storage setting never worked as it needed to be moved to config depot.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When a full cluster is down or unreachable,
CloudStack currently reports everything the
same as the last known state, which is usually
Up. When it cannot reach a host and cannot
reach another host in the same cluster either,
it returns null and says "I don't know". This
prevents it from reporting the problem. Now,
we return an Alert or Disconnected state so
proper action can be taken.
Also logging was added, so we know what part
of the code put it to Alert or Disconnected.
When a full cluster is down or unreachable,
CloudStack currently reports everything the
same as the last known state, which is usually
Up. When it cannot reach a host and cannot
reach another host in the same cluster either,
it returns null and says "I don't know". This
prevents it from reporting the problem. Now,
we return an Alert or Disconnected state so
proper action can be taken.
Also logging was added, so we know what part
of the code put it to Alert or Disconnected.
ToDayStart/End because ParamProcessWorker.java is taking care of building proper
date format with day start/end
This closes#185
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This allows changing the hvm flag for a template after the template has been
registered.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 3e8b12bbb1)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
inconsistent state (NotUploaded or UploadInProgress) and doesn't transition to any terminal
state (Uploaded, Uploaded). As a result these volumes/templates cannot be removed. Fix is to handle such
volume/template entries correctly.
- pool allocation checks for both root and data disks
- NPE checks to not add null object in collection or try to migrate null VM
- HA work tries need to increment and be given up when max retries are crossed
- VM creation should check IP address format for IPv4 and IPv6
- If userdata is not supported by a network, then fail early if userdata, ssh key,
or password enabled template is passed/used
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 24435dd6bc)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- pool allocation checks for both root and data disks
- NPE checks to not add null object in collection or try to migrate null VM
- HA work tries need to increment and be given up when max retries are crossed
- VM creation should check IP address format for IPv4 and IPv6
- If userdata is not supported by a network, then fail early if userdata, ssh key,
or password enabled template is passed/used
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
1. provide compatibility with the Big Cloud Fabric (BCF) controller
L2 Connectivity Service in both VPC and non-VPC modes
2. virtual network terminology updates: VNS --> BCF_SEGMENT
3. uses HTTPS with trust-always certificate handling
4. topology sync support with BCF controller
5. support multiple (two) BCF controllers with HA
6. support VM migration
7. support Firewall, Static NAT, and Source NAT with NAT enabled option
8. add VifDriver for Indigo Virtual Switch (IVS)
This closes#151
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- With the changes added by the rVPC work, the bump priority became deprecated.
This commit includes a refactor to get it removed from the following resources:
* Java classes
* domain_router table - removing the is_priority_bumpup column
* Fixing unit tests
All changes were tested with:
XenServer 6.2 running under our VMWare zone
CloudStack Management Server running on MacBook Pro
MySql running on MackBook Pro
Storage Type: Local
also fixed the issue wherein the successful uploads where also moving to
error state as the channelinactive is called after the end of successful
upload as well.
added a fileuploaded boolean to check when the channel is inactive.
Customise the messages showed during VPC restart based on redundancy
Do not show "Make Redundant" option if VPC is already redundant
Show on VPC details if a VPC is redundant
Fix the router state. do not show UNKNOW, but MASTER or BACKUP depending on the type of router
Implement the virtual_router_id to be passed as a boot parameter to the router
- it is needed for the keepalived configuration
Fix: RTNETLINK errors
- Management Server health check trying to create already existing interface
- Changes on update_config.py, cs_guestnetwork.py, merger.py
Fix: replace RRouTER_LOG in the CsRedundant.py per log file location
Fix: Guest Net address association during Router restart
- Changes on NicProfileHelper, NicProfileHelperImpl
Fix: aggregationExecution() method on VirtualNetworkApplianceManagerImpl
- Do not send an AggregationControlCommand to a non-configured router
Some classes have been formatted.
Fixing assign IPv4 on GuestNetworkGuru.java
Fixing getRouters() on VpcVirtualRouterElement.java
Fixing Fixing paths on keepalived.conf.templ
Refactor on the other files
* removed the "is redundant" flag form the addVpcRouterToGuestNetwork() method
* removed the "is redundant" flag from the removeVpcRouterFromGuestNetwork() method
* changed the path of the master.py file in the keepalived.conf.temp file
* the call to routerDao.addRouterToGuestNetwork() in the VpcRouterDeploymentDefinition is not needed. That step will be performed once a VM is created
- In addition, when restarting a VPC the routers will have the guest net configured, if any exists.
* Pushing the POM.xml as well, to use the old Jetty for now. Could not fix the logging problem. Will replace the POM with master version after VPC is done.
Fixing Finalize methods in the VpcVirtualNetworkApplianceManager
Making use ot eh RouterControlHelper instead of duplicating methods in the VirtualNetworkApplianceManager
[witp] - redundant vpc virtual routers have the same mac address, have to fix that.
There were more places were the amount of routers is checked.
Not throwing exception when routers > 1
[wip] - we need to refactor VpcViortualRouterElement in order to cope with methods returning true only for the sake of it.
Added a source column to the user table.
Source now has only two values UNKNOWN,LDAP with UNKNOWN being the
default and is an enum is com.cloud.User.
When the source is UNKNOWN, the old method of authenticating against all
the available authenticators is used. If a source is available, only
that particular authenticator will be used.
added overloaded methods in AccountService to createUserAccount and
createUser with source specified.
(cherry picked from commit 5da733072e)
on restart of management server, template sync runs. It checks for
templates in ssvm using the uniquename. If it doesnt find any, cleans
the directory. In case of uploaded templates, these are getting saved
using name instead on uniquename and hence template sync cant find them
and does cleanup. Using uniquename in template.properties now.
We do not throw the exceptions any more, so added info in the logs to say
what happend to this command.
Signed-off-by: Rajani Karuturi <rajanikaruturi@gmail.com>
(cherry picked from commit 659edb4d9b)
Added a source column to the user table.
Source now has only two values UNKNOWN,LDAP with UNKNOWN being the
default and is an enum is com.cloud.User.
When the source is UNKNOWN, the old method of authenticating against all
the available authenticators is used. If a source is available, only
that particular authenticator will be used.
added overloaded methods in AccountService to createUserAccount and
createUser with source specified.
We do not throw the exceptions any more, so added info in the logs to say
what happend to this command.
Signed-off-by: Rajani Karuturi <rajanikaruturi@gmail.com>
This is a plugin that puts in ovm3 support ranging from 3.3.1 to 3.3.2. Basic
functionality is in here, advanced networking etc..
Snapshots only work when a VM is stopped now due to the semantics of OVM's raw
image implementation (so snapshots should work on a storage level underneath the
hypervisor shrug)
This closes#113
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
During upload, POST url is saved in template_store_ref DB table. Now during download, same url is incorrectly returned back.
Fixed the code to cleanup POST url from DB on successful template upload.
- UI: use post when updating user
- S3: don't send s3 key in the response
- VPN: don't send preshared key in remoteaccessvpn api response
- Snapshot response should set zone id not volume's device id
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 02cadc3fb3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- UI: use post when updating user
- S3: don't send s3 key in the response
- VPN: don't send preshared key in remoteaccessvpn api response
- Snapshot response should set zone id not volume's device id
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Adds X-XSS-Protection header
- Adds X-Content-Type-Options header
- Fixes to use json content type defined from global settings
- Uses secure cookie if enabled in global settings
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit b6b3494782)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Adds X-XSS-Protection header
- Adds X-Content-Type-Options header
- Fixes to use json content type defined from global settings
- Uses secure cookie if enabled in global settings
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- insecure authenticators excluded in configuration
- snapshot response should have zone
- remove vmsnapshots when removing accounts
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Backend should update if state was diabled and now has changed
- UI's fetch latest does not actually fetch latest
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 985a61652e)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Backend should update if state was diabled and now has changed
- UI's fetch latest does not actually fetch latest
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Design Document:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Allow+VM+listing+by+User+ID
- Adds column to VMInstance DAO
- Adds column in vm_instance table
- Adds column in the UserVMJoinVO
- Adds default admin user which has UID = 2
- Adds migration path that sets user_id to first user of the accountId that
owns the vm in vm_instance table
- Add arg on list VMs API to query by userId, add support in query layer
- Refactor VMInstanceVO and child classes to accept userId
- Add code to let service layer pass userId if loggedIn user belongs to same
account as the owner executing an API call or use first user from owner account
- In case of CPVM and SSVM use system user ID
- Fix unit tests and spring injections
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
1. getRouters() doesn't handle RestartNetwork with cleanup=true for basic zone,
because pod wouldn't be specific at the time.
2. The regression caused by the following fix. The variable "routers" was
overrided with some local values, result in only one of the routers in multiple
pods would return, thus only one router would be started.
commit 6dd5c3fd42
Author: Rohit Yadav <bhaisaab@apache.org>
Date: Thu Oct 11 18:30:00 2012 +0530
CLOUDSTACK-70: Improve restart network behaviour for basic network
(cherry picked from commit aaeadc5c44)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
pool, the source and destination pools cannot be local and cluster/zone and vice versa.
Cloudstack detects it and throws a exception. However, the end user only sees an
unexpected exception and not the reason for failure. Fixed it by making sure the
reason for the failure is correctly captured and shown to the end user.
(cherry picked from commit cffae8eef0)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
server/src/com/cloud/storage/VolumeApiServiceImpl.java
During VM creation, if vm.instancename.flag is set to true and hypervisor type is VMware, check if VM with the same hostname already exists in the zone.
(cherry picked from commit 5f9e4fddf3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
For AttachVolume/DetachVolume API command, improve user error message in case of RuntimeException by throwing the exception instead of 'Unexpected Exception'.
(cherry picked from commit 4d7ede535d)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
server/src/com/cloud/storage/VolumeApiServiceImpl.java
When migration fails instead of returning NULL, throw the exception.
(cherry picked from commit a5a65c7b55)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If VM has been cold migrated across different VMware DCs, then unregister the VM from source host.
(cherry picked from commit 15b348632d)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If user hasn't supplied a display name for a VM, default it to VM name in listVolume response.
This behaviour is identical to listVirtualMachine response.
(cherry picked from commit ff7997a2b1)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The volume/template size and install path was not getting updated properly.
The upload status response should return these properties on completion of upload.
Fixed some issues with the polling logic to handle scenarios when SSVM is destroyed/down.
Also changed the status of the volume_store_ref entries so that subsequent operations work fine.
Call removeRawUsageRecords with interval (> 0) and it will clean up cloud_usage
table by removing records older than interval no. of days from today (current date)
and in case it runs when the job exec time is near, it will fail alerting
user to try again after a 15 min window.
There is an issue with async job scheduler, if this API were async it tries
to search and remove job from cloud_usage.async_job table and fails which is
why this API is sync and extends BaseCmd.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Separate global config to enable/disable Storage Migration during normal deployment
Introduced a configuration parameter named enable.storage.migration
(cherry picked from commit c55bc0b2d1)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-4201: listServiceOfferings API needs to be able to take virtualmachineid of SystemVM and return service offerings available for the vm to change service offering
(cherry picked from commit ee0f0a1cff)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This limits the likeliness of timing attacks against the API.
See http://codahale.com/a-lesson-in-timing-attacks/ for the
full rationale.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
server/src/com/cloud/api/ApiServer.java
server/src/com/cloud/user/AccountManagerImpl.java
(cherry picked from commit 9b4e39e837)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This limits the likeliness of timing attacks against the API.
See http://codahale.com/a-lesson-in-timing-attacks/ for the
full rationale.
Conflicts:
server/src/com/cloud/api/ApiServer.java
server/src/com/cloud/user/AccountManagerImpl.java
This removes extra whitespaces from the JSON serialized response.
After the fix, tested to work with:
- Present UI
- CloudMonkey
- Old buggy json parsers
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 921ad057de)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This removes extra whitespaces from the JSON serialized response.
After the fix, tested to work with:
- Present UI
- CloudMonkey
- Old buggy json parsers
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If user hasn't supplied a display name for a VM, default it to VM name in listVolume response.
This behaviour is identical to listVirtualMachine response.
For AttachVolume/DetachVolume API command, improve user error message in case of RuntimeException by throwing the exception instead of 'Unexpected Exception'.
During VM creation, if vm.instancename.flag is set to true and hypervisor type is VMware, check if VM with the same hostname already exists in the zone.
During vmsync if StopCommand (issued as part of PowerOff/PowerMissing report) fails to stop VM (since VM is running on HV),
don't transition VM state to "Stopped" in CS db. Also added a check to throw ConcurrentOperationException if vm state is not
"Running" after start operation.
During vmsync if StopCommand (issued as part of PowerOff/PowerMissing report) fails to stop VM (since VM is running on HV),
don't transition VM state to "Stopped" in CS db. Also added a check to throw ConcurrentOperationException if vm state is not
"Running" after start operation.
on calling GetUploadParamsForVolume, persisting the metadata to db
validating the account limits and incrementing the appropriate limits
encoded the metadata on management server using preshared key
Changes:
- The event of deleteing an affinity group is published on the MessageBus so that IAM Service can listen and process the event, However the publish operation should not be handled within a DB transaction, since it may take longer and hold the DB transaction for long unnecessarily
- Publish any events to MessageBus outside of the transaction
Conflicts:
server/src/org/apache/cloudstack/affinity/AffinityGroupServiceImpl.java
Changes:
- When there is HA we try to redeploy the affected vm using regular planners and if that fails we retry using the special planner for HA (which skips checking disable threshold)
Now because of job framework the InsufficientCapacittyException gets masked and the special planners are not called. Job framework needs to be fixed to rethrow the correct exception.
- Also the VM Work Job framework is not setting the DeploymentPlanner to the VmWorkJob. So the HA Planner being passed by HAMgr was not getting used.
- Now the job framework sets the planner passed in by any caller of the VM Start operation, to the job
Changes:
- When there is HA we try to redeploy the affected vm using regular planners and if that fails we retry using the special planner for HA (which skips checking disable threshold)
Now because of job framework the InsufficientCapacittyException gets masked and the special planners are not called. Job framework needs to be fixed to rethrow the correct exception.
- Also the VM Work Job framework is not setting the DeploymentPlanner to the VmWorkJob. So the HA Planner being passed by HAMgr was not getting used.
- Now the job framework sets the planner passed in by any caller of the VM Start operation, to the job
Changes:
- The event of deleteing an affinity group is published on the MessageBus so that IAM Service can listen and process the event, However the publish operation should not be handled within a DB transaction, since it may take longer and hold the DB transaction for long unnecessarily
- Publish any events to MessageBus outside of the transaction
on calling GetUploadParamsForTemplate, persisting the metadata to db
validating the account limits and incrementing the appropriate limits
encoded the metadata on management server using preshared key
Steps to reproduce if you have this issue:
- Create a VM's volume snapshot
- Remove VM's template and mark the template as removed with timestamp in DB
- Restart mgmt server and create a volume out of snapshot you should get NPE
Fix: In `storagePoolHasEnoughSpace`, we're only searching for a VM's volume's
snapshot's template by Id and not including removed templates. This is a corner
case and NPE hits when template has been marked removed for a VM's volume's
template so we should search including removed templates.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit f189c105d8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Steps to reproduce if you have this issue:
- Create a VM's volume snapshot
- Remove VM's template and mark the template as removed with timestamp in DB
- Restart mgmt server and create a volume out of snapshot you should get NPE
Fix: In `storagePoolHasEnoughSpace`, we're only searching for a VM's volume's
snapshot's template by Id and not including removed templates. This is a corner
case and NPE hits when template has been marked removed for a VM's volume's
template so we should search including removed templates.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit f189c105d8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On default iptables rules are updated to add ACCEPT egress traffic.
If the network egress default policy is false, CS remove ACCEPT and adds the DROP rule which
is egress default rule when there are no other egress rules.
If the CS network egress default policy is true, CS won't configure any default rule for egress because
router already came up to accept egress traffic. If there are already egress rules for network then the
egress rules get applied on VR.
For isolated network with out firewall service, VR default allows egress traffic (guestnetwork --> public network)
The last commit 513adab51b didn't fully fix it. Scenario #1 was not handled, only #2 was handled.
Fixed#1 as part of this commit.
1. If VM is in stopped state in CS due to 'PowerMissing' report from old host (hostId is null) and then there is a 'PowerOn' report from new host
2. If VM is in running state in CS and there is a 'PowerOn' report from new host
On default iptables rules are updated to add ACCEPT egress traffic.
If the network egress default policy is false, CS remove ACCEPT and adds the DROP rule which
is egress default rule when there are no other egress rules.
If the CS network egress default policy is true, CS won't configure any default rule for egress because
router already came up to accept egress traffic. If there are already egress rules for network then the
egress rules get applied on VR.
For isolated network with out firewall service, VR default allows egress traffic (guestnetwork --> public network)
Ensure that VR is re-booted when it is moved to another host out-of-band. This is necessary to re-program all network rules
Conflicts:
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
The previous fix tried to access StatsCollector from UsageManagerImpl
which is not possible due to dependency cycle.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 1e0880cbab)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
The previous fix tried to access StatsCollector from UsageManagerImpl
which is not possible due to dependency cycle.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If an auth API call (such as login, logout) is called on unauthenticated port
such as the 8096 integration server port, we need to ignore such API calls
as calling auth APIs on 8096 is un-necessary and is undefined.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 21a6bef53b)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If an auth API call (such as login, logout) is called on unauthenticated port
such as the 8096 integration server port, we need to ignore such API calls
as calling auth APIs on 8096 is un-necessary and is undefined.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If we create VM with shared service offering and attach disk with local disk offering,
and one of storage pool is full(cannot be allocated) and other is not full then
we are not putting the cluster in avoid list which is causing this infinite loop.
Fixed by putting the cluster in avoid list even if one of the storage pool is full(cannot be allocated)
pool, the source and destination pools cannot be local and cluster/zone and vice versa.
Cloudstack detects it and throws a exception. However, the end user only sees an
unexpected exception and not the reason for failure. Fixed it by making sure the
reason for the failure is correctly captured and shown to the end user.
This allows external processing of VmStats information without using
the usage server of CloudStack
Statistics are being send to Graphite using UDP and not TCP.
UDP is used to prevent the management server waiting for TCP timeouts
when the Graphite server is unavailable
Allows updating details (key/value) pair which updatse entries
invm_template_details and user_vm_details tables using updateVM and updateTemplate
APIs. This allows sys admins to update nics, controllers etc without DB hacking.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 97fa4a023e)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Allows updating details (key/value) pair which updatse entries
invm_template_details and user_vm_details tables using updateVM and updateTemplate
APIs. This allows sys admins to update nics, controllers etc without DB hacking.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Unnecessary exception in MS logs while removing default NIC from VM. Following changes are made:
1. Changed the exception from CloudRuntimeException to InvalidParameterValueExecption.
2. Moved out validation logic to UserVMManagerImpl from VirtualMachineManagerImpl.
3. Handling InvalidParameterValueException from async API calls so that they are not logged as ERROR in MS logs.
In ConfigurationVo, changed the setter to do the encryption if required
like the getter. Called the setter in constructor as well.
Removed references of encryption check in different places.
Reviewed-by: Santhosh Edukulla
This closes#35
Unnecessary exception in MS logs while removing default NIC from VM. Following changes are made:
1. Changed the exception from CloudRuntimeException to InvalidParameterValueExecption.
2. Moved out validation logic to UserVMManagerImpl from VirtualMachineManagerImpl.
3. Handling InvalidParameterValueException from async API calls so that they are not logged as ERROR in MS logs.
failed to migrate to the other host in the cluster.
Migration for vGPU VMs is not supported in XS, so instead of migrating them to
new server, stopping them.
failed to migrate to the other host in the cluster.
Migration for vGPU VMs is not supported in XS, so instead of migrating them to
new server, stopping them.
If we create VM with shared service offering and attach disk with local disk offering,
and one of storage pool is full(cannot be allocated) and other is not full then
we are not putting the cluster in avoid list which is causing this infinite loop.
Fixed by putting the cluster in avoid list even if one of the storage pool is full(cannot be allocated)
CLOUDSTACK-4201: listServiceOfferings API needs to be able to take virtualmachineid of SystemVM and return service offerings available for the vm to change service offering
Sheng Yang changed 2 classes, ut only one was related to the bug CLOUDSTACK-7605.
I applied the changed on the routerslist, used during the deployment of the virtual routers.
Tested Advanced Zone against the simulator. 69 happy tests in place
When the refactor took place, we should have changed first structure, then behaviour. By refactoring the deployRouter method
we changed how the templateName was retrieved.
Fixed and tested using the simulator and the following Marvin tests
test_privategateway_acl
test_routers
test_vpc_vpn
test_service_offerings
test_volumes
test_reset_vm_on_reboot
test_multipleips_per_nic
Conflicts:
server/src/com/cloud/network/router/NetworkHelperImpl.java
Making code clearer and simple.
Conflicts:
server/src/com/cloud/network/rules/PrivateGatewayRules.java
server/src/com/cloud/network/rules/VirtualNetworkApplianceFactory.java
server/src/org/apache/cloudstack/network/topology/BasicNetworkTopology.java
server/src/org/apache/cloudstack/network/topology/NetworkTopologyVisitor.java
fixing the injection of the network DAO in the PrivateGatewayRules;
all tests that were failing in Travis have been tested before the commit.
Conflicts:
server/src/com/cloud/network/router/NetworkHelperImpl.java
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
removing methods from Vpc appliance;
changing the way VpcElement calls the command;
there is still work tob e done with the destroyPrivateGateway rule.
Conflicts:
server/src/com/cloud/network/rules/VirtualNetworkApplianceFactory.java
server/src/org/apache/cloudstack/network/topology/BasicNetworkTopology.java
server/src/org/apache/cloudstack/network/topology/NetworkTopology.java
Also factor out NicProfile specific methods and fix some DI config.
Conflicts:
server/src/org/cloud/network/router/deployment/VpcRouterDeploymentDefinition.java
server/test/org/cloud/network/router/deployment/VpcRouterDeploymentDefinitionTest.java
adding handle single network method to the NetworkGeneralHelper;
moving getRealPriority to the NetworkGeneralHelper;
making priority constants part of the VirtualNetworkApplianceManager;
changing the network topology implementation in order to use the NetworkGeneralManager instead of the appliance
Conflicts:
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
server/src/org/apache/cloudstack/network/topology/AdvancedNetworkTopology.java
server/src/org/apache/cloudstack/network/topology/BasicNetworkTopology.java
Implement the missing commands related to DHCP PV Lan and DHCP SubNet
Conflicts:
server/src/com/cloud/network/element/VirtualRouterElement.java
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
server/src/com/cloud/network/rules/DhcpRules.java
server/src/com/cloud/network/rules/VirtualNetworkApplianceFactory.java
server/src/org/apache/cloudstack/network/topology/AdvancedNetworkTopology.java
server/src/org/apache/cloudstack/network/topology/BasicNetworkTopology.java
server/src/org/apache/cloudstack/network/topology/BasicNetworkVisitor.java
server/src/org/apache/cloudstack/network/topology/NetworkTopologyVisitor.java
GPU enabled hosts from non-GPU VM deployment.
Cluster reordering is based on the number of unique host tags in a cluster,
cluster with most number of unique host tags will put at the end of list.
Hosts with GPU capability will get tagged with implicit tags defined by
global config param 'implicit.host.tags' at the time os host discovery.
Also added FirstFitPlannerTest unit test file.
GPU enabled hosts from non-GPU VM deployment.
Cluster reordering is based on the number of unique host tags in a cluster,
cluster with most number of unique host tags will put at the end of list.
Hosts with GPU capability will get tagged with implicit tags defined by
global config param 'implicit.host.tags' at the time os host discovery.
Also added FirstFitPlannerTest unit test file.
GPU enabled hosts from non-GPU VM deployment.
Cluster reordering is based on the number of unique host tags in a cluster,
cluster with most number of unique host tags will put at the end of list.
Hosts with GPU capability will get tagged with implicit tags defined by
global config param 'implicit.host.tags' at the time os host discovery.
Also added FirstFitPlannerTest unit test file.
(cherry picked from commit d910b4ff14)
GPU enabled hosts from non-GPU VM deployment.
Cluster reordering is based on the number of unique host tags in a cluster,
cluster with most number of unique host tags will put at the end of list.
Hosts with GPU capability will get tagged with implicit tags defined by
global config param 'implicit.host.tags' at the time os host discovery.
Also added FirstFitPlannerTest unit test file.
(cherry picked from commit 39fe766c2b)
the operation is tried on other hypervisors it fails but logs a stack trace. We
should just log a message that the operation isn't supported.
(cherry picked from commit ec1123aca1)
Removed the unnecessary multiply factor for both the config parameters. Also removed the duplicate entries from Config.java as these are not required
(cherry picked from commit a6ee4112a5)
GPU enabled hosts from non-GPU VM deployment.
Cluster reordering is based on the number of unique host tags in a cluster,
cluster with most number of unique host tags will put at the end of list.
Hosts with GPU capability will get tagged with implicit tags defined by
global config param 'implicit.host.tags' at the time os host discovery.
Also added FirstFitPlannerTest unit test file.
GPU enabled hosts from non-GPU VM deployment.
Cluster reordering is based on the number of unique host tags in a cluster,
cluster with most number of unique host tags will put at the end of list.
Hosts with GPU capability will get tagged with implicit tags defined by
global config param 'implicit.host.tags' at the time os host discovery.
Also added FirstFitPlannerTest unit test file.
Separate global config to enable/disable Storage Migration during normal deployment
Introduced a configuration parameter named enable.storage.migration
1. getRouters() doesn't handle RestartNetwork with cleanup=true for basic zone,
because pod wouldn't be specific at the time.
2. The regression caused by the following fix. The variable "routers" was
overrided with some local values, result in only one of the routers in multiple
pods would return, thus only one router would be started.
commit 6dd5c3fd42
Author: Rohit Yadav <bhaisaab@apache.org>
Date: Thu Oct 11 18:30:00 2012 +0530
CLOUDSTACK-70: Improve restart network behaviour for basic network
When sendAlert is called on an AlertManager impl, if it fails it logs that
something was wrong but does not log the body of the issue/error. This means
we tell the user/admin that there was an issue but don't share the "issue"
with them at all as the email alert fail (or that they were not initialized).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 885c02dbd8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
server/src/com/cloud/alert/AlertManagerImpl.java
usage/src/com/cloud/usage/UsageAlertManagerImpl.java
searchForVolumesInternal() indicated some inconsistency in the use of entity().isDisplayVolume() property – used twice as “display” and “displayVolume” in search criteria. And then exception/assert happens while setting the property.
Correcting the issue.
NPE can happen if Spring fails to inject api authenticator, so better check
and set list of commands if the authenticator is not null or returning null cmds
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Have opensaml dependency to get version from root pom
- add com.cloud.api.auth.APIAuthenticationManagerImpl to spring ctx manager
- Fix getCommands() in APIAuthenticationManagerImpl
- Fix imports in resources, test and src classes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Move interfaces and classes from server to api module
- This can be then used for pluggable api authenticators
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Creates SAMLRequest and uses HTTP redirect binding (uses GET/302)
- Redirects to IdP for auth
- On successful auth, check for assertion
- Tries to get attributes based on standard LDAP attribute names
- Next, gets user using EntityManager, if not found creates one with NameID as UUID
- Finally tries to log in and redirect
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In vm secondary ips case static nat configured to vm primary/secondary ips
IP1-->vm1Ip1, IP2-->vm1Ip2
While destroying vm deleting all static nats associated with the vm
Whenever a new API command is added to CloudStack, if developers are not using
the recommended namespace of org.apache.cloudstack.api.* they should add their
custom namespace/package here. ApiXmlDocWriter uses ReflectUtils to find APIs
within these packages (which must be also available in cloud-client).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Pass HttpServletResponse as it can be useful for authenticators which need to
have their own writer interface/method
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- This implements ManageBase, is a pluggable service
- Has a mechanism to return commands, useful for apidocs etc.
- Has a method to return APIAuthenticator based on API command name
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* is respected only when vm is deployed from ISO, or hypervisorType is not set on the template record
* if parameter passed when vm is deployed from template having hypervisor info set, validate that these 2 parameters are the same instead of silently defaulting the final value to the one set on the template
For ResizeVolume API command -
1. If hypervisor resource throws an exception, handle the NPE thrown by the job framework.
2. Improve user error message in case of RuntimeException by throwing the exception instead of 'Unexpected Exception'.
not correctly initialized in the vmprofile. With a custom offering the cpu,
cpu-speed and memory were getting initialized to null which caused a NPE in
the allocator. Fixed it by explicitly initializing the offering details in the
vm profile before calling into the allocator for listing suitable hosts.
Changes:
-DeploymentPlanner should include disabled resources only when the VM owner is Admin account.
The disabled resources should be ignored when VM is owned by any other user.
requires storage migration resulting in failure of VM migration. This also improves
the hostsformigration api. Firstly we were trying to list all hosts and then
finding suitable storage pools for all volumes and then we were checking whether
vm migration requires storage migration to that host. Now the process is updated.
We are checking for only those volumes which are not in zone wide primary store.
We are verifying by comparing volumes->poolid->clusterid to host clusterid. If it
uses local or clusterids are different then verifying whether host has suitable
storage pools for the volume of the vm to be migrated too.
Changes:
- Only way to choose a certain storage pool is by using disk_offering_tags
- Added a parameter to take in a disk offering Id.
- Admin will have to create a custom sized disk offering and tag it as necessary for the user
- This custom offering Id should be passed during uploadVolume to associate the volume with this disk offering
2. Add ctxDetails in the ParamGenericValidationWorker to avoid warning for api validation
3. Add some missing events.
4. Correcting mapping for ResourceObjectType.NetworkACL and ResourceObjectType.NetworkACLItem
(cherry picked from commit 8a9092c3cd)
There was a commit 4b89a45e57 on master which was
added by "root@devcloud.apache.org" with no committer signature so I cannot tell
whom to reach. In the code it looks like they forgot to initialize the static
config dao variable which is causing NPE on master. The fix simply initializes
the s_configDao with injected configDao object.
Signed-off-by: Rohit Yadav <bhaisaab@apache.org>
1. Adding the missing Template/Volume URLs expiration functionality
2. Improvement - While deleting the volume during expiration use rm -rf as vmware now contains directoy
3. Improvement - Use standard Answer so that the error gets logged in case deletion of expiration link didnt work fine.
4. Improvement - In case of domain change, expire the old urls
Local env
1. Create user defined mapping
2. Delete / modify user defined mapping. Should pass
3. Delete / modify system defined mapping. Should fail
Signed off by :- Nitin Mehta<nitin.mehta@citrix.com>
This restriction was purposely avoid confusion of VPN setup, but later found too
strictly and cause troubles for deployment. Removed after testing one customer
gateway with multiple connections.
getting applied when a tier in VPC is created.
fix ensures, VpcRoutingPolicyUpdate is send when network rules are
programmed when network tier in VPC is created
the provider only if at least one capability is specified
Fix avoids the check, and only if the createNetworkOffering
'StrechedL2'Subnet' capability is specified then it should match against
'Connectivity' service provider
- Added exception to the logger method parameters to make stack trace available
- removed checking of debug level, it does not save temporary object creation here
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
affinity groups available for regular users by passing account and
domainId paramater. This is to revert IAM way of implementing
listAffinityGroupsCmd, will bring it back when we have implemented real
impersonation.
- added compile time maven plugin to compress css and js files
- Added new StaticResourceServlet to serve the requests to static files, this replaces the tomcat DefaultServlet
- Tests
- mapping of the static resource servlet to css and js files
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
templatefilter="shared" is used , we see public templates also being
included in the list. This commit reverts listTemplates behavior to 4.3
old logic without using consistent interpretation of list parameters
adopted in new IAM model.
invalid password is provided.
- AccountManager now works using accountId instead of accountType in
following methods too:
- isResourceDomainAdmin()
- isAdmin()
However, for SSVM, the value from configuration server overrides the default in Config.java. Work around is to change in global properties.
Local testing, checking a fresh install has the above property false by default.
Signed-off-by: Nitin Mehta<nitin.mehta@citrix.com>
Add ability to distinguish between user defined and system defined guest OS and mappings
Add default mappings for XenServer
Local testing with
1. Add new guest OS by API
2. Add new guest OS mapping by API
Made changes so that uploading custom certificate works for ssvm.
1. Reboot ssvm only when private key is passed meaning the server cert is passed. This is because while uploading the server cert is the last to be uploaded. And we want to propagate the entire chain once uploading is done.
2. Change the SecStorageSetupCommand sent to ssvm so that it also carries the root cert apart from having the chain and the server cert and key.
3. Change ssvm agent code to be able to configure root cert to the java key store.
4. Change ssvm configure ssl script to insert the chain certs correctly.
5. Fix order of chain certificates for apache webserver in SSVM
6. Remove double encoding and decoding for uploadCustomCertificate API from UI and server code respectively, so that API call without UI works fine
7. Java 1.7 - disable using SNI since copyTemplate doesnt work for SSL.
- new test for disableUser
- unused code removed
- A redundant if branch removed - all branches are doing the same
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
In case some environments has different performance or we found some commands
would took too long to execute, one global configuration item is introduced to
specify "time out in seconds per one command in aggregation commands".
By default it's 3 seconds. If admin feel it's too long, it can be adjust to as
low as 1 seconds, which runs still well in my machine.
Conflicts:
setup/db/db/schema-430to440.sql
listAll=true, show all resources that caller (or impersonater) has
ListEntry access type; otherwise, show all resources that caller (or
impersonater) has UseEntry access type.
In some network environment, 1*3 seconds by default make RvR setup too
sensitive. A configurable parameter would be better for fitting different
network environments.
Updated these APIs to use VM primary/secondary details on LB rule.
listLoadBalancerRuleInstances API lists the vm ips which are assigned to lb rule when passed
listlbvmips
removeFromLoadBalancerRule is updated to remove the spcific vm ip entry assinged to LB rule.
Added new param vmidipmap to this API
Added fields to /api and /server classes for CustomDiskOfferingMinSize
to be available in CapabilitiesResponse. Fixed UI code in Instance
Wizard to have this config value as the minimum selectable option when
we are in custom disk size mode.
Changes:
- Caused due to a MySql error during 'Project' account cleanup. The MySql error hits a deadlock bug in the MessageBus code that does not release the lock/decrement the counter Eventually all callers on the MessageBus end up waiting to enter
- This fixes the account cleanup MySql error.
new tests for ApiServlet covering
- utf8Fixup
- some of processRequestInContext
minor cleanup done in StringBuffer handling and utf8Fixup got a bit shorter
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
- unit test for getDateStringInternal
- StringBuffer replaced with StringBuilder, string concatenation replaced with append
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
introduce 'RegionLevelVpc' as capability of 'Connectivity' service. Add
support for CreateVPCOffering to take the 'regionlevelvpc' as capability
of service 'connectivity'.
introduces new capability 'StretchedL2Subnet' for 'Connectivity'
service. Also add support to createNetworkOffering api to allow
StretchedL2Subnet capablity for the connectivity service.
adds check to ensure 'Connectivity' service provider supports
'StretchedL2Subnet' and 'RegionLevelVpc' capabilities when specified in
createNetworkOffering and createVpcOffering respectivley
enable ovs plug-in to support both StretchedL2Subnet and RegionLevelVpc
capabilities
make zone id optional parameter in createVpc, zone id can be null only
if vpc offfering supports region level VPC
in region level vpc, let the network/tier to be created in any zone of
the region
keep zoneid as required param for createVpc
skip external guest network guru if 'Connectivy' service is present in
network offering
fix build break in contrail manager
permit VM's to be created in different zone that in which network is
created if the network support streched L2 subnet
add integration tests for region level VPC
rebase to master
Conflicts:
setup/db/db/schema-430to440.sql
Conflicts:
api/src/org/apache/cloudstack/api/ApiConstants.java
engine/schema/src/com/cloud/network/vpc/VpcVO.java
setup/db/db/schema-430to440.sql
distributed routing. Fix ensures there is approproate flag in other
config of the network to indicate the bridge type.
Conflicts:
server/src/com/cloud/network/vpc/VpcManagerImpl.java
And when the flag is updated on the resource accordingly generate usage events again.
Also when display flag is false in deployvm cmd it should be false for the volumes associated with the vm as well
to flow rules and applies them on the bridge
add event subscriber in OvsTunnelManager, that listens to
replaceNetworkAcl events. On event sends the updated policy info to all
the hosts in the VPC
- get the hosts on which VPC spans given vpc id
- get the VM's in the VPC
- get the hosts on which a network spans
- get the VPC's to which a hosts is part of
- get VM's of a VPC on a hosts
introduces capability to build a physical toplogy representation of a
VPC. This json file is encapsulated in
OvsVpcPhysicalTopologyConfigCommand, and is used to send full topology
to hypervisor hosts. On hypervisor this json config can be used to setup
tunnels, configure bridge, add flow rules etc
Ovs GURU, to use different broasdcast scheme VS://vpcid.gerkey for the
networks in VPC that use distributed routing
each VIF and tunnel interface to carry the network UUID in other/options
config
storage pool (SMB) and attached to a running vm can be live migrated to another shared storage
pool. Also a vm and its volumes can be live migrated to another host and storage pool respectively.
2) Corrected some logging in MidoNetPublicNetworkGuru - removed .toString method call on the objects in the log body as toString is called on the object by default when use log4j
Adding some more parameter names that should not be considered unknown since they belong to general use paramters
Signed-off-by: Alena Prokharchyk <alena.prokharchyk@citrix.com>
Add APIs for ability to add new guest OS types, and their hypervisor specific mappings.
The table guest_os_hypervisor is currently maintained but not used, and the APIs reuse the same
Signed off by: Nitin Mehta <nitin.mehta@citrix.com>
CLOUDSTACK-4762 : Enabling VGPU support for XenServer.
This feature is to enable the GPU-passthrough and vGPU functionality,
with the help of this feature, admins/users will be able to leverage
the GPU graphics unit power by deploying a virtul machine with GPU or
vGPU support or by changing the service offering of an existing VM
at any later point of time. There GPU/vGPU enabled VMs are able to run
graphical applications.
For now, this feature is only supported with XenServer hypervisor but
can be extended to add the support of other hypervisors.
Publish first class objects involved in an operation (for now vm uuid) on the event bus . Example - during attach/detachIso along with iso id, vm id should be available as well.
Moving default transport for console proxy, SSVM to http.
See
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Realhost+IP+changes
for more info.
jlk ported Amogh's patch for 4.3 to master - code base is different
enough that patch has multiple issues.
Author: Amogh Vasekar <Amogh Vasekar <amogh.vasekar@citrix.com>
Signed-off-by: John Kinsella <jlk@stratosec.co> 1394398017 -0700
Corrects problems from previous attempt. Fixes based on help comments from
the community and conflict resolution
Signed-off-by: Daan Hoogland <daan@onecht.net>
Introduce generic BaseAsync(Vm/Volume)Cmd to make get the flag value for logging action events.
Rename the db field as display rather than display_event in keeping with the convention
Unable to register private template across all Zones - crosszones flag no longer works.
This was because the code skipped the loop after the first download initiation. Introduced a set so that if it is already downloaded to the same zone then skip it for private template.
fixed issue: if public traffic is on a physical network isolated by VLAN,
and guest traffic is on an another physical network isolated by VXLAN,
public traffic's broadcast type is updated to VXLAN by mistake.
submitted-by: mail@ynojima.net
PrepareForMigrationCommand, so that destination hypervisor can
mount pool. This further exposed an issue for KVM where iso
was not getting cleaned up upon successful migration, fixed as well.
encoded. This cause createStoragePool or addImageStore command to fail if special
characters were present. Updated the code to pass user, password and domain as part
of details while adding primary or secondary. Also made changes on server side to
handle it.
If a VM instance is deployed with startVm=false, then calling restoreVm on the instance fails with NPE
because CS tries to expunge a volume that has not been created in primary store.
When Action Events are generated and placed on the Event Bus, an
"account" parameter is included with the event. When these events are
generated for resources within projects, this "account" parameter is not
useful as it's the UUID of the project account, instead of the project.
To solve this, I updated ActionEventsUtil class to include a "project"
parameter in the generated events when the resource is being
changed/add/deleted in a project.
vxlan code. Users can set a physical network to isolation type 'vxlan',
put public traffic on that physical network, and it will still attempt
to use 'vlan' isolation on the KVM hosts. This is going to be an issue
for other isolation types as well, but I'm not familiar with them, so
I'm just fixing vxlan for now.
Also intoroduced one more global config parameter - api.servlet.endpoint (default value is "http://localhost:8080/client/api?"). The parameter defines API end point. Can be used by CS components/services deployed remotely, for sending CS API requests
Bump up RAM size of system offering for SSVM to 512MB. Fix if default service offering is already not present.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
introduces a force option in delete network to forcifully delete a
network. This comes handy in rare cases where network fails to implenet
and network is in shutdown state, but network shutdown to rollback
implement process fails as well.
Conflicts:
api/src/org/apache/cloudstack/api/command/user/network/DeleteNetworkCmd.java
server/src/com/cloud/user/DomainManagerImpl.java
parent template is deleted. Modified template_view so that removed(or InActive) templates also be there in the view.
Previous behavior of listing templates and state column in vm_templates will be the same.
on hyperv. There were multiple issues here. Upload volume was actually
failing because the post download check for vhd on the cifs share was
unsuccessful. Also the agent code wasn't parsing the volume path correctly.
Fixed it too.
The things is, VR would take time to execute the commands, say it would need
time t1(which is greater than 0).
And the interval between parallel deployment is t2(which can be almost 0). In
any case, VR need to handle commands in sequence internally, so if t1 > t2, then
the new task in the VR would wait longer and longer to execute, then some
commands result in timeout ultimately. No matter how long the timeout is, if
there are enough big number of queued task for VR, the last ones can timeout.
Currently VR has a robust mechanism to sequence the jobs internal and I
confirmed in this case, it works well. But there is no way to fix this issue if
VR is already 100% load at all time.
Probably we can improve the speed of VR internal executing, but seems the
ultimate answer is: set execute.in.sequence.network.element.commands to true. VR
doesn’t know how long it would take for mgmt. server to timeout, only mgmt.
server knows that.
By setting sequence execution in VR to "true", mgmt server would handle the
commands in a queue, make sure that VR won't be overload and report unexpected
failure just because it's overload.
Added filters while listing scoped configuration parameters.
Fixed: Some parameters are missing from UI settings tab because of missing scope entry in configuration table.
Signed-off-by: Koushik Das <koushik@apache.org>
Multiple generic soure NAT IPs provided for network"
'getExistingSourceNatInNetwork' method was retruning source nat ip for
a particular account, resulting in multiple source nat ip's to be
assigned to a shared network on network implemen. Fix ensures that
account id is not considered for shared network implement.
restart, firewall rules dropped from iptables post restart
on VR restart, not all public IP's associated with the network are sent
with IpAssocCmd to VR. This fix will ensure all the ip's associated with
the network irrespective of the account are sent as part of
IpAssocCommand
Conflicts:
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
cloudstack though the storage pool wasn't accessible from the host. Make sure host
to pool mapping is added in the storage_pool_host_ref table when a host is added
to the cluster.
Adding the missing file
During HA and maintenance call different planners (if the original planners are not able to find capacity) which skip some heurestics
Adding the missing file
During HA and maintenance call different planners (if the original planners are not able to find capacity) which skip some heurestics
Regression from the below commit
commit 494ccd821d
Author: ynojima <mail@ynojima.net>
Date: Wed Nov 6 11:02:56 2013 -0700
Bugfix: VR has double NICs connected to Public network
Changes:
- The vmprofile owner passed in to the planner should be the VM's account and not the caller
- Do not do the access check for Root Admin
Conflicts:
server/src/com/cloud/deploy/DeploymentPlanningManagerImpl.java
brought back up after being down for few hours,snapshot jobs do not get
triggered with reason "there is other active snapshot tasks on the
instance to which the volume is attached".
Not able to list snapshots when few snapshots are in "CreatedOnPrimary" state. Dont throw an exception when snapshot doesnt have an entry in the snapshot store ref for the snapshot in Image store because that fails to list all snapshots and also it can a perfect use case when the backup flag is not turned on.
1. Egress default policy rules is send to the firewall provider. It is up to the
provider to configure the rules.
2. The default policy rules are send for both allow and deny default policy.
3. On network shutdown rules for delete are send.
4. For VR and SRX, by default deny the traffic. So no default rule to deny traffic is required.
service and not used for LB
Fix adds a boolean flag to addNetscalerLoadBalancer api, which
will mark added NetScaler for exclusive GSLB service. A netscaler marked
as exclusive gslb service provider is not picked for any guest network's
lb provider.
scaling up vms was not considering parameter cluster.(memory/cpu).allocated.capacity.disablethreshold. Fixed it
Also added overprovisioning factor retrieval at the cluster level for host capacity check
Changes:
- We need to reset the avoid set to its original state while calling the storage pool allocators for each volume.
- This will prevent affecting allocation of the disks due to the avoid set output of the prior disk allocations.
Conflicts:
server/src/com/cloud/deploy/DeploymentPlanningManagerImpl.java
Changes:
- Added 'virtualmachineid' parameter to the createVolume API to specify a VM for the volume. The Vm should be in 'Running' or 'Stopped' state.
- This parameter is used only when createVolume API is called using snapshotid parameter
- When this parameter is set, the volume is created from the snapshot in the pod/cluster of the VM. Also the volume is then attached to the VM in the same request
- If attach Volume fails but create has succeeded, the API errors out but the Volume created remains available. User may attach the same volume later
- When Vm is provided, but if no storage pool is available in the VM's pod/cluster then the volume is not created and API fails.
Changes:
- Do not do the stoarge capacity check for a VM having READY Volumes that are already present on the storagepool.
Conflicts:
server/src/com/cloud/deploy/DeploymentPlanningManagerImpl.java
This patch adds support for trust chains in the netscaler.
I initially planned on using the 10.1 API's "bundle" feature but during
my testing I found that was not working. So I am doing the chain linking
myself. Also NS can have only one entity of a certificate ie lets say
two different users try to add the same certificate on the netscaler
only one of them will go through. The other one says resouce already
exists even though they have different files.
This can be a problem in trust chains where the chain can be shared
between multiple accounts/certificates. So, I am using the figerprint as
an identifier of a certificate and making sure that we delete it only
when no one references it.
Resource limit shouldnt be counted for resources with display flag = 0. Adding functions to resourcelimitmanager and doing it for the volumes at the moment.
"Public IP Address" for system VMs
In system VM response object return EIP as public IP in case of basic
zone with EIP service.
Conflicts:
server/src/com/cloud/api/ApiResponseHelper.java
Tests:
- all tests are @Test rather than having one test to call them, so they can be run one by one
- tests that expect exception from a method fail if there is none
- no longer extends TestCase so that the original method names could be kept as test
Implementation:
- include root cause in exceptions when possible - helps at troubleshuting
- close readers
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
ResourceUnavailableException won't be catched by VirtualNetworkApplianceManager
after Alex's refactor, because VirtualMachineManager.start() would cover the
exceptions as well. So changed the calling to advanceStart() instead.
Added a field to the command for serviceOfferingId and changed the internal interface to accept the service offering as parameter
Applied automated code cleanup
This patch adds a network plugin to support Palo Alto Networks firewall (their appliance and their VM series firewall).
More information in the FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Palo+Alto+Firewall+Integration
Features supported are:
- List/Add/Delete Palo Alto service provider
- List/Add/Delete Palo Alto network service offering
- List/Add/Delete Palo Alto network with above service offering
- Add instance to the new network (creates the public IP and private gateway/cidr on the PA as well as the source nat rule)
- List/Add/Delete Ingress Firewall rule
- List/Add/Delete Egress Firewall rule
- List/Add/Delete Port Forwarding rule
- List/Add/Delete Static Nat rule
- Supports Palo Alto Networks 'Log Forwarding' profile globally per device (additional docs to come)
- Supports Palo Alto Networks 'Security Profile Groups' functionality globally per device (additional docs to come)
Knowns limitations:
- Only supports one public IP range in CloudStack.
- Currently not verifying SSL certificates when creating a connection between CloudStack and the Palo Alto Networks firewall.
- Currently not tracking usage on Public IPs.
Signed-off-by: Sheng Yang <sheng.yang@citrix.com>
Fix is use the storage overprovisioning factor (global configuration parameter "storage.overprovisioning.factor") to calculate total provisioning capacity for storage space allocation over VMFS based storage pools as well.
There are two level of thin provisioning provided in VMware, storage level and file-level (VMDK) thin provisioning. in CloudStack, all volumes are provisioned with thin VMDK format, so at hypervisor level, we ALWAYS do thin provisioning. If storage vendor has the ability to provide storage level thin provisioning in addition to VMDK thin provisioning, it is also allowed since it is transparent to Cloudstack.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Changes:
- Set total capacity of a host if it has changed in the CapacityChecker thread
- Fix bug while setting the reserved/used cpu/mem capacity - only one of them used to get set
Changes:
- Consider if VM requires the local storage or shared storage or both for its disks.
- Accordingly all pools in the cluster should consider local or shared or both pools
Conflicts:
server/src/com/cloud/agent/manager/allocator/HostAllocator.java
architecture allows additional functionality to be easily added. Incorporating the plugin in CloudStack will allow
the community to participate in improving the features available with Hyper-V. The plugin uses a Director Connect
Agent architecture described here: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Progress
Add ability to pass kvp data via the key cloudstack-vm-userdata
Rearrange code to make it clearer what .NET objects are being used.
Test failures are easier to deal with if test key is not deleted.
Acquire management/pod ip for control ip when VR deploys in HyperV
Fixed deletion on VM's on hyperv host when mgmt server gets restarted due to HA
Implementation for attach iso command. Attaches an iso to a given vm.
Now VPN connection can be created as "passive", which would enable the ability
of remote peer initiate the connection. So it's possible for VPC VR to
establish the connection to another VPC VR of CloudStack.
Test case also included.
The test case would create 2 vpcs and using VPN to connect them.
1) vxlan will use bridge scheme 'brvx-<vni>'. Multiple physical networks can host guest
traffic type with vxlan isolation, so long as they don't use the same VNI range.
2) Guest traffic labels can be physical interface if bridge by given name is not found.
Normally we take traffic label name, find the matching bridge, then resolve that to a
physical interface. Then we create guest bridges on that interface. Now we can just
specify the interface.
TODO:
1. error handling of no domains present, nested hierarchy
2. handling the case when the api call fails for a specific user/users
3. test cases for LdapUserManager
Signed-off-by: Ian Duffy <ian@ianduffy.ie>
In case of VMware, once the state of the old root volume has been updated to destroyed force expunge it from primary storage to avoid the garbage collector from trying to delete the new root volume
1) added createDetail to ResourceDetailDao interface to provide generic way of creating resourceDetail DB objects
2) added resource details support for firewall rules
The following types were not setup to discover extensions
com.cloud.network.element.FirewallServiceProvider
com.cloud.network.element.PortForwardingServiceProvider
com.cloud.network.element.StaticNatServiceProvider
com.cloud.network.element.NetworkACLServiceProvider
com.cloud.network.element.LoadBalancingServiceProvider
com.cloud.network.element.Site2SiteVpnServiceProvider
1) Added support for Zone resource details
2) Renamed DcDetailsDao to DataCenterDetailsDao to follow the CS name convention for DataCenter related classes
This is not perfect fix but should address 99% of the issues. The only
time an issue could happen is if something in the bootstrap or system
context tried to lock a row. Which shouldn't happen at the moment. If
we find that to be an issue, the LockMasterListener could move to system
context and be inject here.
* changed name for TaggedResourceType enum to ResourceObjectType as this enum is used both by ResourceMetaData and ResourceTags code
* enhanced the enum with extra fields resourceTagsSupport (boolean) and metadataSupport identifying if the resource supports tags and/or metadata.
* cleanup unused @Inject objects from the ResourceMetaDataManager
commit c9ee0d12e191e803fb341f3f96e95ca434a36f6c
Author: Wei Zhou <w.zhou@leaseweb.com>
Date: Wed Oct 23 16:55:10 2013 +0200
CLOUDSTACK-4931, CLOUDSTACK-4937: setDetails to user VMs only
(cherry picked from commit a94acc5a43)
commit fe1586c71377bc6d219db2dcf088c40b65dd1fc4
Author: Anthony Xu <anthony.xu@citrix.com>
Date: Tue Oct 22 11:20:27 2013 -0700
CLOUDSTACK-4649:
vm sync tracks the pv driver version for xenserver
Anthony
commit 56a218f66eda540b4b4b04030ee71fc6863f8532
Author: Anthony Xu <anthony.xu@citrix.com>
Date: Mon Oct 21 16:10:07 2013 -0700
CLOUDSTACK-4649:
xs 6.1/6.2 introduce the new virtual platform, so there are two virtual platforms, windows PV driver version must match virtual platforms,
this patch tracks PV driver versions in vm details and template details.
Anthony
commit 4e85d28c678a6f96b5b70d8d33fc60f9d1ea3df6
Author: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Date: Mon Oct 21 21:17:33 2013 +0200
removed unused static field
- s_httpClientManager was not used
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
commit d4121fa26023db236f7396cea455ef090672ae9a
Author: Chris Suich <chris.suich@netapp.com>
Date: Tue Oct 22 10:45:22 2013 -0400
Updated DataMotionServiceImpl and ApiResponseHelper based on review feedback.
commit aaf026e1e4204d405bcda2ae4f1a01b1d0f7e7cb
Author: Chris Suich <chris.suich@netapp.com>
Date: Thu Oct 17 14:27:12 2013 -0400
Added context to strategy sorting error responses
Added TODOs for DRYing out pickStrategy() overloading
commit a221f4aa3fb2ddc255bc35cf753f98f88f5bf44e
Author: Chris Suich <chris.suich@netapp.com>
Date: Wed Oct 16 09:57:28 2013 -0400
Updated inefficient strategy sorting/selection
Removed unnecessary canRevertSnapshot from PrimaryDataStoreDriver
Other general cleaup and fixes from reviews
commit 7d58949c6a1b7e853e891b59387a9620e8cd7a91
Author: Chris Suich <chris.suich@netapp.com>
Date: Mon Oct 14 14:01:22 2013 -0400
Added volume snapshot revert capability to SnapshotResponse
Updated UI to hide/show snapshot revert action per snapshot
Signed-off-by: Edison Su <sudison@gmail.com>
- new utility method introduced in PropertiesUtil to load properties objects from files
- RegionManagerImpl modified to use the utility method
- Tests added for both
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
xs 6.1/6.2 introduce the new virtual platform, so there are two virtual platforms, windows PV driver version must match virtual platforms,
this patch tracks PV driver versions in vm details and template details.
Anthony
public range to see whether the same VLAN exists in portable IP range.
added check to enusre a VLAN id used for a public IP range is not used
for portable ip range
Conflicts:
server/src/com/cloud/configuration/ConfigurationManagerImpl.java
The cluster and zone wide storage pool allocators returned shared pools even for volumes meant to be on local storage pool.
If the VM uses local disk then cluster and zone storage allocators should not handle it and return null or empty list.
Also fixed the deployment planner to avoid a cluster if
a. avoid set returned by storage pool allocators is empty OR
b. all local or shared pools in a cluster are in avoid state
Conflicts:
engine/storage/src/org/apache/cloudstack/storage/allocator/ClusterScopeStoragePoolAllocator.java
engine/storage/src/org/apache/cloudstack/storage/allocator/ZoneWideStoragePoolAllocator.java
defined in different VLANs across public and portable ranges
added checks to restric same ip range to be configure as both public ip
range and portable ip range
This patch would reset the priority in such condition:
1. All redundant routers are stopped, e.g. due to network GC
2. User start one VM in the network
3. The routers would be brought up with reseted priority(100 & 99).
This would resolve the issue of network GC result in lower limit of redundant router priority reached.
Even though the volume may get migrated from shared to local storage, it is not possible to update the disk offering.
The fix is to disallow migration from shared to local store.
VM deployment is fine, issue is in attach volume where all possible scenarios are not handled.
The following needs to be logic of attached volume:
1. if data volume scope is zone then allow attach (this is already there)
2. if data volume scope is cluster
a. if root volume scope is host, allow if both are in same cluster (already there)
b. if root volume scope is zone, allow if vm and data volume in same cluster (fixed as part of this commit)
3. if data volume scope is host allow if vm and data volume in same host (fixed as part of this commit)
list Clusters/pods/zones API not accounting for reserved in the used capacity percentage.
Fix listCapacity cmd for reserved as well
Signed off by : nitin mehta<nitin.mehta@citrix.com>
Introduction of a new Transaction API that is more consistent with the style
of Spring's transaction managment. The existing Transaction class was renamed
to TransactionLegacy. All of the non-DAO code in the management server has been
updated to use the new Transaction API.
1) Fixed the way we build the response for resource details
2) Fixed the response name - should be generic "resourcedetail". The type is being carried in resourceType response parameter
3) Throw unsupported excpetion if unsupported resourceType is passed in. Before, user vm was returned
fix listDiskOffering to not display offerings to the normal users with forDisplay=false. But display them to ROOT Admin irrespective of the flag.
Added display flag in the updateVolume/offeirng commands
Signed off by : nitin mehta<nitin.mehta@citrix.com>
This code was recently switched from using HashMap to ConcurrentHashMap.
ConcurrentHashMap does not accept null keys and will through a NPE. Adding
a null check just in case somebody passes null.
fix listVolumes to not display volumes to the normal users with forDisplay=false. But display volumes to ROOT Admin irrespective of the flag.
Signed off by : nitin mehta<nitin.mehta@citrix.com>
These changes are a joint effort between Edison and I to refactor some
of the code around snapshotting VM volumes and creating
templates/volumes from VM volume snapshots. In general, we were working
towards allowing PrimaryDataStoreDrivers to create snapshots on primary
storage and not requiring the snapshots to be transferred to secondary
storage.
High level changes:
-Added uuid to NfsTO, SwiftTO & S3TO to cut down on the requirement of
PrimaryDataStoreTO and ImageStoreTO which don't really serve much of a
purpose
-Initial work towards enable reverting VM volume from snapshots
-Added hypervisor commands for introducing and forgetting new hypervisor
objects (snapshots, templates & volumes)
Signed-off-by: Edison Su <sudison@gmail.com>
fix listVirtualMachines to not display vms to the normal users with forDisplay=false. But displayvms to ROOT Admin irrespective of the flag.
Signed off by : nitin mehta<nitin.mehta@citrix.com>
ACS is now comprised of a hierarchy of spring application contexts.
Each plugin can contribute configuration files to add to an existing
module or create it's own module.
Additionally, for the mgmt server, ACS custom AOP is no longer used
and instead we use Spring AOP to manage interceptors.
The managed context framework provides a simple way to add logic
to ACS at the various entry points of the system. As threads are
launched and ran listeners can be registered for onEntry or onLeave
of the managed context. This framework will be used specifically
to handle DB transaction checking and setting up the CallContext.
This framework is need to transition away from ACS custom AOP to
Spring AOP.
Various classes are using member injection to inject extensible objects.
Really those object should come from an AdapterList that is injected in.
This patch switches the code to use setter injection that will later allow
spring to inject an AdapterList or something similar to allow
extensibility.
DefaultUserAuthenticator maskes the _name varible in ComponentLifecycleBase
making the setName() method not work as expected. This patch cleans up the
code such that getName() will be getClass().getSimpleName() unless
overridden in the Spring configuration.
Also fixed existing bugs for the API:
* corrected action event to be VOLUME.UPDATE (was VOLUME.ATTACH)
* all parameters to update, should be optional - fixed that. If nothing is specified, the db object will remain with its original fields
Initial patch for VXLAN support.
Fully functional, hopefully, for GuestNetwork - AdvancedZone.
Patch Note:
in cloudstack-server
- Add isolation method VXLAN
- Add VxlanGuestNetworkGuru as plugin for VXLAN isolation
- Modify NetworkServiceImpl to handle extended vNet range for VXLAN isolation
- Add VXLAN isolation option in zoneWizard UI
in cloudstack-agent (kvm)
- Add modifyvxlan.sh script that handle bridge/vxlan interface manipulation script
-- Usage is exactly same to modifyvlan.sh
- BridgeVifDriver will call modifyvxlan.sh instead of modifyvlan.sh when VXLAN is used for isolation
Database changes:
- No change in database structure.
- VXLAN isolation uses same tables that VLAN uses to store vNet allocation status.
Known Issue and/or TODO:
- Some resource still says 'VLAN' in log even if VXLAN is used
- in UI, "Network - GuestNetworks" dosen't display VNI
-- VLAN ID field displays "N/A"
- Documentation!
Signed-off-by : Toshiaki Hatano <haeena@haeena.net>
- change the AccountService::isRootAdmin(short) to isRootAdmin(long accountId);
- Change all callers
- Change all places that check the account.getType() directly to call the AccountManagerImpl.
replaced Long object instantiation with static call to Long.toString in case it was only to generate a string
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
- variables inlined
- cpu utilization is not cast to float from double
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Signed-off-by: Min Chen <min.chen@citrix.com>
double values do not need a Double object to be casted to long
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Signed-off-by: Min Chen <min.chen@citrix.com>
It was implemented by extending the NFS provider. Its validation was updated so that you can pass it a URL containing the
details of a CIFS share. The code that mounts NFS shares was extended to allow it do the same for CIFS shares. Otherwise,
the secondary storage code is left unchanged.
This reverts commit 5a8a2a259e.
We would fix it in another way, since mgmt server may get state updated in
time.
Conflicts:
server/src/com/cloud/network/router/VirtualNetworkApplianceManagerImpl.java
Changes:
- When listing a zone, add clause in the search to check the account_id for a dedicated zone
- When listsing a zone with a domainid, add a similar clause.
- DomainCheck:: checkAccess() for a zone should consider that zone can now be dediacted to a specific account and check access accordingly.
Conflicts:
server/src/com/cloud/api/query/vo/DataCenterJoinVO.java
setup/db/db/schema-410to420.sql
Changes:
createZone API:
- This API takes in domainid, set it to the zone record in the data_center table
updateZone API:
- This API uses 'isPublic' flag to set a private zone to public - if this flag is set and the zone is dedicated, release the dedication and remove the domainid from the data_center table
listZone API:
- This API already has 'domainid' parameter. We should allow list zones by domain for Root admin.
DedicateZone API:
- set domainid in the data_center table
ReleaseDedicatedZone API:
- remove zoneid from the data_center table
Changes:
- Implict creation of the 'ExplicitDedication' Affinity group during resource dedication
- Only one group per account or per domain will be present
- ListDedicatedResources by affinityGroup
- Deployment should consider dedicated resources associated to the group only
- Deleting affinity group should release the dedicated resouces
- Releasing the dedicated resources should remove the group associated if there are no more resources.
Conflicts:
plugins/dedicated-resources/src/org/apache/cloudstack/dedicated/DedicatedResourceManagerImpl.java
plugins/dedicated-resources/test/org/apache/cloudstack/dedicated/manager/DedicatedApiUnitTest.java
server/src/com/cloud/configuration/ConfigurationManagerImpl.java
Changes:
- 'ExcplicitDedication' type of group can be created/deleted by Root admin only
- Users can no longer create this type of affinity group
- RootAdmin can create this type of affinitygroup at domain level. Such a domain level group is available for all accounts in that domain for listing and for use during deployVM.
- The domain level affinitygroup should be visible to the users in that domain, domain admins and Root admin.
Conflicts:
server/src/com/cloud/api/query/QueryManagerImpl.java
server/src/org/apache/cloudstack/affinity/AffinityGroupServiceImpl.java
server/test/org/apache/cloudstack/affinity/AffinityApiUnitTest.java
There are three issues in resource_count table
(1) expunge a vm, the public_ip decreases and becomes -1 in basic zone.
(2) recover a vm, the volume increase.
(3) restore a vm, the volume decrease.
deployment fails with error "Message: Invalid configuration for device
'2'."
ensuring that direct network guru assigns a mac address for the nic that
it designs
Improving the error message saying ssh key pair should be assinged to VM to get the encrypted password.
Signed-off-by: Koushik Das <koushik@apache.org>
During host connect multiple listeners gets invoked, one of them is the download listener.
As part of processConnect() method, it checks if templates needs to be downloaded to secondary
store for a particular HV type. As part of that check it computes list of HVs present in the
zone. The earlier logic was to query all hosts (excluding current one) and iterate over them to
make the list. This is not optimal and is bound to have some latency as the number of hosts
increases.
Optimized the logic by querying the list of HVs from the db. directly instead of iterating over
all hosts in the zone.
Conflicts:
server/src/com/cloud/resource/ResourceManagerImpl.java
Initial patch for VXLAN support.
Fully functional, hopefully, for GuestNetwork - AdvancedZone.
Patch Note:
in cloudstack-server
- Add isolation method VXLAN
- Add VxlanGuestNetworkGuru as plugin for VXLAN isolation
- Modify NetworkServiceImpl to handle extended vNet range for VXLAN isolation
- Add VXLAN isolation option in zoneWizard UI
in cloudstack-agent (kvm)
- Add modifyvxlan.sh script that handle bridge/vxlan interface manipulation script
-- Usage is exactly same to modifyvlan.sh
- BridgeVifDriver will call modifyvxlan.sh instead of modifyvlan.sh when VXLAN is used for isolation
Database changes:
- No change in database structure.
- VXLAN isolation uses same tables that VLAN uses to store vNet allocation status.
Known Issue:
- Some resource still says 'VLAN' in log even if VXLAN is used
- in UI, "Network - GuestNetworks" dosen't display VNI
-- VLAN ID field displays "N/A"
The locking code in implement/shutdown network code was not efficient. Even in order to check the current state of the network lock was getting acquired which is not required. This resulted in delays in deploy VM as can be seen from attached logs where the code waited on the lock just to check if network is implemented.
As part of the fix moved out code that is checking if the network is already implemented or shutdowned outside the lock.
For some scenarios like prepare nic, all network service providers are checked which is not efficient and also introduces unnecessary dependencies.
The check to use only the required providers is already there for implement, shutdown operation on network. Put the same check for all missing cases.
If you shut down the agent while VMs are running, the management
server assumes that the VMs are continuing to run. You can then
delete the host while it is in 'disconnected' state, and those VMs
will be unusable, forever in running state. They can't change state
because the host no longer exists. This patch checks for any VMs
that may have been tied to the removed host and resets their state
so that cloudstack can continue to manage them.
This reverts commit 94254e3c2b.
Conflicts:
server/src/com/cloud/configuration/ConfigurationManagerImpl.java
Regular user should be able to list the network offering with specifyVlan=true. He just can't use when create the network as he is unaware of the physical network topology. But as the admin can create the network on the user's behalf using this kind of offering, so the user should be able to see the offering's details
ASF 4.1 to 4.2 Upgrade: Missing Global Configuration parameters on the Upgraded Setup related to "storage.cache". Adding them
Signed off by : nitin mehta<nitin.mehta@citrix.com>
only when there is portable IP range added at region level.
region response will now have details if portable IP service is enabled
or not. Portable IP service for a region is turned off by default. when
adming adds a portable ip range portable ip service is enabled for the
region.
Updating the new system template URLs for the existing templates during upgrade to 4.2.
If new 4.2 system template is registered before upgrade then marking the old templates as removed during upgrade.
The time increased due to the newly added dedicated resources feature. During regular VM deployment, all dedicated resources are put in avoid list so that they are not considered for deployment.
Now the way to compute the list of dedicated resources is not optimal and performance deteriorates in an environment having lot of pods, clusters and hosts as the logic is to query db. for each suc resource.
The fix is to optimize the logic not to loop through all resources but get the list of each resource type in a single query.
Conflicts:
server/src/com/cloud/deploy/DeploymentPlanningManagerImpl.java
The findStoragePoolsForMigration and migrateVolume api were explicitly blocking moving
a volume if the instance to which it was attached was stopped. Updated the check for
the same.
portable IP is trying to insert network id as physical network id
ensuring network id, physical network id, source network id are properly
set for portable ip in user_ip_address and vlan tables
In external network after network GC the network n/w cidr changes.
In this case the static nat enable vm ip also chagnes. So updated the new
vm ip address in user_ip_address table.
KVM.snapshot.enabled is lowercased by f025db95 to keep the configs
uniformly lower-case. But it missed the upgrade script and the
references in SnapshotManagerImpl. This commit will fix the issue in all
locations
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
(cherry picked from commit 0e216fa7e41bdfe0cc744006bb896c8b00138ca2)
cloudsite1 infro from the second site NetScaler device
ensuring when a site no longer participates in GSLB, complete GSLB
config for that rule is wiped out on the GSLB provider for that site
Private templates would now get copied to only one of image storage chosen randamly as was the case earlier. Dont throw an exception for uploading volumes when there are multiple image stores, instead choose one of them randomly
Signed off by : nitin mehta<nitin.mehta@citrix.com>
Detail: Accounts can fail in cleanup/gc process due to inconsistent op_networks
table and null pointer in looking up account for event publishing.
BUG-ID: CLOUDSTACK-3957
Signed-off-by: Marcus Sorensen <marcus@betterservers.com> 1375204815 -0600
sourceNAT service on it
if a portable ip is first IP associated with a non-VPC network, then its
being considered as source nat IP. This fix adds exemption for portable
IP not to be considred for source nat.
Add simultor to the seemingly strict filter which should happen within
the hypervisor resource and not the virtualmachine :/
Signed-off-by: Prasanna Santhanam <tsp@apache.org>
(cherry picked from commit 3d4d350dbe)
Rohit Yadav
Rajani Karuturi
nvazquez
Will Stevens
Mike Tutkowski
Bharat Kumar
Nathan Johnson
jeff
Nick Livens
Marc-Aurèle Brothier
Daan Hoogland
Loic Lambiel
Kishan Kavala
Sudhansu
Wei Zhou
Priyank Parihar
Syed
Remi Bergsma
weingartner
Olivier Lemasle
Maneesha.P
Abhinandan Prateek
Abhinandan Prateek
Kshitij Kansal
SudharmaJain
David Mabry
gabrascher
Koushik Das
Wilder Rodrigues
Miguel Ferreira
Nitin Kumar Maharana
Michael Andersen
Boris Schrijver
Nitin Kumar Maharana
pedro-martins
Anshul Gangwar
Harikrishna Patnala
Patrick Dube
Sateesh Chodapuneedi
Rajani Karuturi
cirstofolini
Boris Schrijver
Rajani Karuturi
Daan Hoogland
wenwenxiong
ramamurtis
Aaron Brady
Funs Kessen
Sudhansu
Suresh Kumar Anaparti
Wido den Hollander
Ashwin Swaroop
Sanjay Tripathi
Kshitij Kansal
Rene Moser
radu-stefanache
Devdeep Singh
Milamber
Damodar
Prachi Damle
Daan Hoogland
Jayapal
Likitha Shetty
Rene Moser
Rafael da Fonseca
Daan Hoogland
Santhosh Edukulla
Ilia Shakitko
KC Wang
Amogh Vasekar
Ian Southam
Hugo Trippaers
Antonio Fornie
Sander Botman
Nitin Mehta
Min Chen
Funs
Laszlo Hornyak
Sheng Yang
Saksham Srivastava
Rajesh Battala
Anthony Xu
cloudtrends
Pierre-Yves Ritschard
Edison Su
Sebastien Goasguen
Ilia Shakitko
Daniel Vega
Syed
Will Stevens
Wilder Rodrigues
David Nalley
Frank Zhang
Fred Clift
Wei Zhou
seif
Stephen Hoogendijk
Girish Chaudhari
Luis Henrique Okama
Alena Prokharchyk
seif
namita.chaudhari
Kishan Kavala
Murali Reddy
Suresh Ramamurthy
Ian Duffy
Kishan Kavala
punith-cloudbyte
Kelven Yang
Prachi Damle
ynojima
Tim Mackey
Rohit Yadav
Hiroki Ohashi
Upendra Moturi
Marcus Sorensen
root
Tanner Danzey
Sam Schmit
Ding Yuan
sbalineni
Gabor Apati-Nagy
John Kinsella
David Grizzanti
Mandar Barve
Alex Hitchins
Alex Huang
David Grizzanti
tuna
yichi.lu
Alex Ough
Fang Wang
lafferty
wilderrodrigues
Murali Reddy
fjkdf
Prasanna Santhanam
Darren Shepherd
Kelven Yang
Donal Lafferty
Chris Suich
dhoogland
Darren Shepherd
Chip Childers
Chiradeep Vittal
Toshiaki Hatano
Jessica Wang
Mice Xia
Thomas O'Dowd
