This is an extention of #3732 for kvm.
This is restricted to ovs > 2.9.2
Since Xen uses ovs 2.6, pvlan is unsupported.
This also fixes issues of vms on the same pvlan unable to communicate if they're on the same host
There are certain scenarios where the 169.254.0.0/16 subnet is used for different
purposes then CloudStack on a hypervisor.
Once of such scenarios is a BGP+EVPN+VXLAN setup using BGP Unnumbered where the
169.254.0.1 address is used by Frr/Zebra BGP routing to send traffic to the
neighboring router.
The following settings can be changed in the agent.properties (default values added):
control.cidr=169.254.0.0/16
Make sure the global setting 'control.cidr' matches the values defined in the agent.propeties!
In the future the mgmt server can send this parameter to a KVM Agent on startup, but at the moment
this framework is not in place and thus these values can't be send to the Agent in a proper manner.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* netutils: Add method to verify if IPv6 Address is EUI-64
By checking if ff:fe is present in the address we can see if an IPv6 Address
is EUI-64 or not.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* ipv6: Do not allow a Secondary IPv6 address to be EUI-64
EUI-64 addresses should not be allowed as they can be used in the future by a to be
deployed Instance which has to obtain this address because it matches it's MAC.
In a /64 subnet there are more then enough other IPs available to be allocated to
Instances, therefor we can safely disallow the allocation of EUI-64 addresses.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes the default RootCA provider implementation to initiate
and issue certificate for mgmt server on startup for all the IP addresses
on the default nic of that host.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleanup and Improve NetUtils
This class had many unused methods, inconsistent names and redundant code.
This commit cleans up code, renames a few methods and constants.
The global/account setting 'api.allowed.source.cidr.list' is set
to 0.0.0.0/0,::/0 by default preserve the current behavior and thus
allow API calls for accounts from all IPv4 and IPv6 subnets.
Users can set it to a comma-separated list of IPv4/IPv6 subnets to
restrict API calls for Admin accounts to certain parts of their network(s).
This is to improve Security. Should an attacker steal the Access/Secret key
of an account he/she still needs to be in a subnet from where accounts are
allowed to perform API calls.
This is a good security measure for APIs which are connected to the public internet.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Added ability to specify mac in deployVirtualMachine and
addNicToVirtualMachine api endpoints.
Validates mac address to be in the form of:
aa:bb:cc:dd:ee:ff , aa-bb-cc-dd-ee-ff , or aa.bb.cc.dd.ee.ff.
Ensures that mac address is a Unicast mac.
Ensures that the mac address is not already allocated for the
specified network.
* 4.9:
Do not set gateway to 0.0.0.0 for windows clients
CLOUDSTACK-9904: Fix log4j to have @AGENTLOG@ replaced
ignore bogus default gateway when a shared network is secondary the default gateway gets overwritten by a bogus one dnsmasq does the right thing and replaces it with its own default which is not good for us so check for '0.0.0.0'
Activate NioTest following changes in CLOUDSTACK-9348 PR #1549
CLOUDSTACK-9828: GetDomRVersionCommand fails to get the correct version as output Fix tries to return the output as a single command, instead of appending output from two commands
CLOUDSTACK-3223 Exception observed while creating CPVM in VMware Setup with DVS
CLOUDSTACK-9787: Fix wrong return value in NetUtils.isNetworkAWithinNetworkB
This commit implements Ingress and Egress filtering for IPv6 in
Basic Networking.
It allows for opening and closing ports just as can be done with IPv4.
Rules have to be specified twice, once for IPv4 and once for IPv6, for
example:
- 22 until 22: 0.0.0.0/0
- 22 until 22: ::/0
Egress filtering works the same as with IPv4. When no rule is applied all
traffic is allowed. Otherwise only the specified traffic (with DNS being
the exception) is allowed.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This commit adds the initial functionality for IPv6 in Basic Networking.
When a valid IPv6 CIDR is configured for the POD/VLAN the DirectPodBasedNetworkGuru
will use the EUI-64 calculation to calculate the IPv6 Address the Instance will obtain.
For this it is required that the physical routers in the Layer 2 network (POD/VLAN) send out
Router Advertisements with the same subnet as configured in CloudStack.
A example subnet could be 2001:db8::/64
Using radvd a Linux Router could send out Router Advertisements using this configuration:
interface eth0
{
MinRtrAdvInterval 5;
MaxRtrAdvInterval 60;
AdvSendAdvert on;
AdvOtherConfigFlag off;
IgnoreIfMissing off;
prefix 2001:db8::/64 {
};
RDNSS 2001:db8:ffff::53 {
};
};
A Instance with MAC Address 06:7a:88:00:00:8b will obtain IPv6 address 2001:db8:100::47a:88ff:fe00:8b
Both Windows, Linux and FreeBSD use the same calculation for their IPv6 Addresses, this is specified
in RFC4862 (IPv6 Stateless Address Autoconfiguration).
Under Linux it is mandatory that IPv6 Privacy Extensions are disabled:
$ sysctl -w net.ipv6.conf.all.use_tempaddr=0
Windows should be configured to use the MAC Address as the identifier for the EUI-64/SLAAC calculation.
$ netsh interface ipv6 set privacy state=disabled store=persistent
$ netsh interface ipv6 set global randomizeidentifiers=disabled store=persistent
The IPv6 address is stored in the 'nics' table and is then returned by the API and will be shown in the UI.
Searching for a conflicting IPv6 Address it NOT required as each IPv6 address is based on the MAC Address
of the Instance and therefor unique.
Security Grouping has not been implemented yet and will follow in a upcoming commit.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Given that the method com.cloud.utils.net.NetUtils.cidrToLong(String)
now throws an exception when receiving null or empty cidrs, there is the
need to change methods that use it. Those methods were changed and test
cases created.
Abhishek Kumar
davidjumani
Wido den Hollander
Rohit Yadav
Rohit Yadav
Gabriel Beims Bräscher
Nathan Johnson
Rajani Karuturi
Rajani Karuturi
Aaron Hurt
Ross Hayden
Jayapal
Wei Zhou
Will Stevens
Kshitij Kansal
weingartner
Daan Hoogland
Miguel Ferreira