When we calculate a resource consumption of a host, we need to take the vms in following states into calculation: Running, Starting, Stopping, Migrating (to the host), and vms are Migrating from the host. Because, when stop a vm, the resource on host will be released when vm is stopped. When migrate a vm, the resource on destination host will be increased before migration starts, and resource on source host will be decreased after migraiton succeeds.
In cloudstack, there is a task named CapacityChecked which run every 5 minutes (capacity.check.period =300000 ms by default). It recalculates capacity of all hosts. However, it takes only vms in Running and Starting into consideration. We have faced some issues in host maintenance due to it.
Steps to reproduce the issue
(1) migrate N vms from host A to host B, cpu/ram resource increases before the migration.
(2) capacity check recalculate the capacity of hosts. used capacity of Host B will be reset to original value (not including the vms in Migrating).
(3) migrate some more vms from other host to host B, the migrations are allowed by cloudstack (because used capacity is incorrect). If the actual used memory exceed the physical memory on the host, there might be some critical issues (for example, libvirt dies)
* 4.13:
only update powerstate if sure it is the latest (#3743)
ui: fix migrate host form no host popup (#3682)
client: jetty session timeout set after server is started (#3658)
Increase DHCP lease time to infinite (#3662)
* Service layer changes for new way of tracking maintanence progress
* Fixes after offline code review
* Fix marvin tests
* Change state name and add documentation
* Fix test
* Fix and add more unit tests for different caseS
* Fix and enhance Marvin Tests
* Fixes for corner cases
* More fixes and logging
* UI fixes
* Some minor changes and reducing VMs on host for more contained tests
* Fixed ssh client auth problem causing test failure
* Code review changes + fixes + some more logging
* Fix flaky tests by adding delays between host states
* Added fetching only enabled hosts for tests
* Make port blocking KVM specific and refactor to handle failure
* Make failing migrations due to tagged host instead of port blocking
* Added additional check for migrating VMs
* Refactor to use single place for methods checking maintenance states
If the volume is in "Expunged" state then it should not be
considered towards total resource count of "primarystoragetotal"
field.
Currently cloudstack takes into resource calculation even if the
volume is expunged. The volume itself doesnt exist in primage
storage and hence it should not be considered towrds resource
caculation.
Steps to reproduce the issue:
1 . Get the resource count of "primarystoragetotal" of a particular domain.
2 . Create a VM with 5GB root disk size and stop it.
3 . Now the value of "primarystoragetotal" should be intitial value plus 5.
4 . Navigate to "volumes" of the VM and select "Download Volume" option.
5 . Once the volume is downloaded, expunge the VM.
6 . Get the resource count of "primarystoragetotal". it will be same value as in step 3
But it should be same as initial value obtained in step 1.
With this fix, the value obtained at step 6 will be same as in step 1.
- Removes CentOS6/el6 packaging (voting thread reference https://markmail.org/message/u3ka4hwn2lzwiero)
- Add upgrade path from 4.13 to 4.14
- Enable live storage migration support for KVM by default as el6 is deprecated
- PRs using live storage migration
#2997 KVM VM live migration with ROOT volume on file storage type
#2983 KVM live storage migration intra cluster from NFS source and destination
#2298 CLOUDSTACK-9620: Enhancements for managed storage
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When a network IP range is removed, the "vlan" stays mapped on pod_vlan_map; therefore, the method that lists the VLANs by pod id will return null VLANS.
This PR adds proper verifications to avoid null pointer exception when deploying VRs on a pod with removed VLANs. The exception was caused on getPlaceholderNicForRouter.
Problem: In Vmware, appliances that have options that are required to be answered before deployments are configurable through vSphere vCenter user interface but it is not possible from the CloudStack user interface.
Root cause: CloudStack does not handle vApp configuration options during deployments if the appliance contains configurable options. These configurations are mandatory for VM deployment from the appliance on Vmware vSphere vCenter. As shown in the image below, Vmware detects there are mandatory configurations that the administrator must set before deploy the VM from the appliance (in red on the image below):
Solution:
On template registration, after it is downloaded to secondary storage, the OVF file is examined and OVF properties are extracted from the file when available.
OVF properties extracted from templates after being downloaded to secondary storage are stored on the new table 'template_ovf_properties'.
A new optional section is added to the VM deployment wizard in the UI:
If the selected template does not contain OVF properties, then the optional section is not displayed on the wizard.
If the selected template contains OVF properties, then the optional new section is displayed. Each OVF property is displayed and the user must complete every property before proceeding to the next section.
If any configuration property is empty, then a dialog is displayed indicating that there are empty properties which must be set before proceeding
image
The specific OVF properties set on deployment are stored on the 'user_vm_details' table with the prefix: 'ovfproperties-'.
The VM is configured with the vApp configuration section containing the values that the user provided on the wizard.
Currently when refreshing disk usage stats all kvm agents are asked to collect stats for all volumes. In setups with multiple kvm hosts where managed storage is used, not all volumes are attached to all kvm hosts, this results in a large number of warnings in the kvm agent logs. This change introduces a filter step in case managed storage is used so that the management server only requests kvm agents for stats about volumes that are connected to each kvm host.
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
If projects have many resource tags, it will take a long time to list projects.
Remove resource tags information from project_view will fix it the issue.
Fixes#3178
Fixes#2742
UI Supported ordering VPC Offerings but the API did not have that
support implemented. This makes the change in updateVPCOfferings
and listVPCOfferings API calls, along with necessary database
changes for supporting sorting of VPC Offerings.
Problem: The disk offering change is not reflected in cloud_usage database table.
Root Cause: The resizeVolume API does not publish the volume disk offering change event to the
cloud_usage database table.
Solution: This issue has been fixed by refactoring the resizeVolume API to publish this disk offering change for volumes that either in Allocated or Ready state.
Moves the method that published events for volumes in Ready state from
the VolumeStateListener class to the orchestrateResizeVolume method in
the VolumeApiService.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Problem: Not able to configure a sort order for the zones that are listed in various views in the UI.
Root Cause: There is no mechanism to accept sort key for existing zones or UI widget, that would allow to listing zones in the UI in a certain order.
Solution: The order of zones in listed in various views in the UI can now be configured through the newly added “sort_key” field added for the zone. It can be set using updateZone API by providing “sort_key” parameter for a zone, or by reordering the items in the zones list in the UI. UI has been updated to show ordering controls in zones list view. Database changes include updating table “data_center” by adding “sort_key” column (containing integer values and defaults to zero).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Problem: Admins don’t want to charge for IP address usage on certain (shared) networks.
Root Cause: There is no flag or detail for admins to provide using UI or API when creating networks to specify if they want IP address usage of the network hidden.
Solution: A new boolean hideipaddressusage flag is added to the createNetwork API and a checkbox in the ‘Add guest network’ UI for the root admins to specify if they want the shared network’s IP address usage to be hidden in the listUsageRecords API response. The provided flag is saved as the ‘hideIpAddressUsage’ detail in the cloud.network_details table for the network. For existing (shared) networks, root admins can also specify the same boolean API parameter hideipaddressusage with the updateNetwork API request to configure the behaviour for an existing network. When the detail/flag is true, the IP address usage for the (shared) network is not exported in the listUsageRecords API response. The listNetworks API response will include the details of a network for root admin only. (note usage is still recorded in the usage database but not return by the listUsageRecords API)
The API flag works for any kind of network via the API, but the checkbox is only shown while creating shared networks in the UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR is for deactivating Ehcache in CloudStack since it is not usable. The first commit remove the default RMI cache peering configured for multicast which most of the time cannot work. It also requires to have an interface up which is not always the case while developing offline.
The second commits remove the configuration to activate caching on some DAOs.
Problems
The code in CS does not seem to fit any caching mechanism especially due to the homemade DAO code. The main 3 flaws are the following:
Entities are not expected to be shared
There is quite a lot of code with method calls passing entity IDs value as long, which does some object fetching. Without caching, this behavior will create distinct objects each time an entity with the same ID is fetched. With the cache enabled, the same object will be shared among those methods. It has been seen that it does generate some side effects where code still expected unchanged entity attributes after calling different methods thus generating exception/bugs.
DAO update operations are using search queries
Some part of the code are updating entities based on a search query, therefore the whole cache must be invalidated (see GenericDaoBase: public int update(UpdateBuilder ub, final SearchCriteria<?> sc, Integer rows);).
Entities based on views joining multiple tables
There are quite a lot of entities based on SQL views joining multiple entities in a same object. Enabling caching on those would require a mechanism to link and cross-remove related objects whenever one of the sub-entity is changed.
Final word
Based on the previously discussed points, the best approach IMHO would be to move out of the custom DAO framework in CS and use a well known one (out of scope of this change of course). It will handle caching well and the joins made by the views in the code. It's not an easy change, but it will fix along a lot of issues and add a proven / robust framework to an important part of the code.
* DPDK vHost User mode selection
* SQL text field and DPDK classes refactor
* Fix NullPointerException after refactor
* Fix unit test
* Refactor details type
Added changes for creating service offerings for specified domain(s) and zone(s).
Fixed checkAccess for disk offerings.
Fixed list APIs for disk and service offerings.
UI changes for creating disk, service offerings for specified domain(s) and zone(s).
Signed-off-by: Abhishek Kumar <abhishek.kumar@shapeblue.com>
Allows creating storage offerings associated with particular domain(s) and zone(s). In create disk/storage offfering form UI, a mult-select control has been addded to select desired zone(s) and domain select element has been made multi-select.
createDiskOffering API has been modified to allow passing list of domain and zone IDs with keys domainids and zoneids respectively. These lists are stored in DB in cloud.disk_offering_details table with 'domainids' and 'zoneids' key as string of comma separated list of IDs. Response for create, update and list disk offering APIs will return domainids, domainnames, zoneids and zonenames in details object of offering.
listDiskOfferings API has been modified to allow passing zoneid to return only offerings which are associated with the zone.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Problem: Custom compute offering does not allow setting min and max values for CPU and VRAM for custom VMs.
Root Cause: Custom compute offerings cannot be created with a given range of CPU number and memory instead it allows only fixed values.
Solution: createServiceOffering API has been modified to allow setting a defined range for CPU number and memory. Also, UI form for compute offering creation is provided with a new field named 'compute offering type’ with values - Fixed, Custom Constrained, Custom Constrained. It will allow the creation of compute offerings either with a fixed CPU speed and memory for fixed compute offering, or with a range of CPU number and memory for custom constrained compute offering or without predefined CPU number, CPU speed and memory for custom unconstrained compute offering.
To allow the user to set CPU number, CPU speed and memory during VM deployment, UI form for VM deployment has been modified to provide controls to change these values. These controls are depicted in screenshots below for custom constrained and custom unconstrained compute offering types.
Sample API calls using cmk to create a constrained service offering and deploying a VM using it,
create serviceoffering name=Constrained displaytext=Constrained customized=true mincpunumber=2 maxcpunumber=4 cpuspeed=400 minmemory=256 maxmemory=1024
deploy virtualmachine displayname=ConstrainedVM serviceofferingid=60f3e500-6559-40b2-9a61-2192891c2bd6 templateid=8e0f4a3e-601b-11e9-9df4-a0afbd4a2d60 zoneid=9612a0c6-ed28-4fae-9a48-6eb207af29e3 details[0].cpuNumber=3 details[0].memory=800
Signed-off-by: Abhishek Kumar <abhishek.kumar@shapeblue.com>
- Fixes PR #3146 db cleanup to the correct 4.12->4.13 upgrade path
- Fixes failing unit test due to jdk specific changes after forward
merging
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* skip geting used bytes for volumes that are not in Ready state
* updated log message
* filter snapshots by state backedup
* removed * import
* filter templates by state 'DOWNLOADED'
* refactored getUsedBytes to use O(1) queries
* querying for ready volumes instead filtering in memory
* make listByStoreIdInReadyState more generic ex listByStoreIdAndState
* updated snapshot search criteria for listByStoreIdAndState
* updated template search criteria for listByPoolIdAndState
* fixed typo in search criteria for listByTemplateAndState
* fixed typo in search criteria for templates in listByPoolIdAndState
* feature: add libvirt / qemu io bursting
Adds the ability to set bursting features from libvirt / qemu
This allows you to utilize the iops and bytes temporary "burst" mode
introduced with libvirt 2.4 and improved upon with libvirt 2.6.
https://blogs.igalia.com/berto/2016/05/24/io-bursts-with-qemu-2-6/
* updates per rafael et al
* api: add command to list management servers
* api: add number of mangement servers in listInfrastructure command
* ui: add block for mangement servers on infra page
* api name resolution method cleanup
It's incorrect to use the findIncludingRemovedBy and
listIncludingRemovedBy for the common list and find operation.
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
This commit allows deploying VMs with a specific IPv4 address.
DirectPodBasedNetworkGuru does not support requesting a custom
IP-Address while creating a new NIC/Instance, throwing the following
error:
Error 530: Does not support custom ip allocation at this time:
NicProfile[0-0-null-null-null
Unknown macro: { "cserrorcode"}
Some use-cases prefer the ability to request the IPv4 address which the
Instance will get.
This implementation adds unit test cases to cover and it was manually
tested in Basic Networking. I can perform more tests if requested.
The view "service_offering_view" doesn't include removed SOs, as a result when SO is removed, the bug happens. The PR introduces a change for resource calculation changing "service_offering_view" to "service_offering" table which has all service offerings.
Must be fixed in:
4.12
4.11
Fixes: #3009
This adds a new API updateVmwareDc that allows admins to update the
VMware datacenter details of a zone. It also recursively updates
the cluster_details for any username/password updates
as well as updates the url detail in cluster_details table and guid
detail in the host_details table with any newly provided vcenter
domain/ip. The update API assumes that there is only one vCenter per
zone. And, since the username/password for each VMware host could be different
than what gets configured for vcenter at zone level, it does not update the
username/password in host_details.
Previously, one has to manually update the db with any new vcenter details for the zone.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Remove some unused Classes
These classes were deleted because they have no references in our code base. They are not in Spring execution flow nor instantiated with "new":
- com.cloud.agent.api.CheckStateAnswer
- com.cloud.agent.api.StartupVMMAgentCommand
- com.cloud.agent.api.routing.UserDataCommand
- remove from description at
com.cloud.configuration.Config.ExecuteInSequenceNetworkElementCommands
enum
- com.cloud.agent.api.storage.UpgradeDiskCommand
- com.cloud.agent.api.storage.CreatePrivateTemplateCommand
- com.cloud.agent.api.storage.DestroyAnswer
- Note: "FIXME: Should have an DestroyAnswer" at
com.cloud.storage.resource.StoragePoolResource
- com.cloud.agent.api.storage.UpgradeDiskAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityAnswer
- com.cloud.agent.api.storage.ManageVolumeAvailabilityCommand
- com.cloud.exception.UsageServerException
- com.cloud.info.SecStorageVmLoadInfo
- com.cloud.serializer.SerializerHelper
* PR#1448 update description of 'execute.in.sequence.network.element.commands' param
Update description of 'execute.in.sequence.network.element.commands'parameter to reflect an unused command that has been removed. The removed class command is 'UserDataCommand'.
* Add cloud schema to update SQL
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
These boolean-return methods are named as "getXXX".
Other boolean-return methods are named as "isXXX".
Considering there methods will return boolean values, it should be more clear and consistent to rename them as "isXXX".
(rebase #2602 and #2816)
This fixes a regression introduced in #2799, by exporting $TYPE
before the `patch` is called to patch/extract archives for ssvm/cpvm.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMware router will be rebooted based on #2794, per current config
the VRs on reboot will go through fsck checks slowing down the deployment
process by few seconds. This will ensure that fsck checks are done
on every 3rd boot of the VR. The `4` is used because 1st boot is done
during the build of systemvmtemplate appliance.
Add upgrade path for a new 4.11.2 systemvmtemplate.
Other changes:
- Add support for XS 7.5 Fixes#2834.
- Reboot VR only if mgmt gw is not pingable on vmware.
- Enable passive ftp by enabling nf_conntrack_helper. This is change in behaviour since linux 4.7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Fix the problem at #1740 when it loads all snapshots in the primary storage
While checking a problem with @mike-tutkowski at PR #1740, we noticed that the method `org.apache.cloudstack.storage.snapshot.SnapshotDataFactoryImpl.getSnapshots(long, DataStoreRole)` was not loading the snapshots in `snapshot_store_ref` table according to their storage role. Instead, it would return a list of all snapshots (even if they are not in the storage role sent as a parameter) saying that they are in the storage that was sent as parameter.
* Add unit test
* 4.11:
comment on unencryption
ui: fix create VPC dialog box failure when zone is SG enabled (#2704)
CLOUDSTACK-10381: Fix password reset / reset ssh key with ConfigDrive
isisnot=
extra message
debug message
imports
update without decrypt doesn't work
set unsensitive attributes as not 'Secure'
remove old config artifacts from update path
This introduces a rolling restart of VRs when networks are restarted
with cleanup option for isolated and VPC networks. A make redundant option is
shown for isolated networks now in UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Using a hierarchy of database version rather than a flat
list of them. Adding a new schema upgrade path was really
cumbersome and error-prone, because we needed to maintain
a flat map of versions and their corresponding list of
upgrade paths (`DbUpgrade`). Instead we're using a logical
hierarchy structure of versions:
```
DatabaseVersionHierarchy.builder()
.next("4.0.0" , new Upgrade40to41())
.next("4.0.1" , new Upgrade40to41())
.next("4.0.2" , new Upgrade40to41())
.next("4.1.0" , new Upgrade410to420())
.next("4.1.1" , new Upgrade410to420())
.next("4.2.0" , new Upgrade420to421())
...
.next("4.2.1" , new Upgrade421to430())
.next("4.9.3.0" , new Upgrade4930to41000())
.next("4.10.0.0", new Upgrade41000to41100())
.next("4.11.0.0", new Upgrade41100to41110())
.build();
```
With this change, when we need to add a new version upgrade
path, we only need to add it in correct place in the hierarchy
rather than add that in dozens of places in `_upgradeMap`.
* CLOUDSTACK-10147 Disabled Xenserver Cluster can still deploy VM's. Added code to skip disabled clusters when selecting a host (#2442)
(cherry picked from commit c3488a51db)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10318: Bug on sorting ACL rules list in chrome (#2478)
(cherry picked from commit 4412563f19)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10284:Creating a snapshot from VM Snapshot generates error if hypervisor is not KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10221: Allow IPv6 when creating a Basic Network (#2397)
Since CloudStack 4.10 Basic Networking supports IPv6 and thus
should be allowed to be specified when creating a network.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit 9733a10ecd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10214: Unable to remove local primary storage (#2390)
Allow admins to remove primary storage pool.
Cherry-picked from eba2e1d8a1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dateutil: constistency of tzdate input and output (#2392)
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
Signed-off-by: Daan Hoogland <daan.hoogland@shapeblue.com>
(cherry picked from commit 2ad5202823)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10054:Volume download times out in 3600 seconds (#2244)
(cherry picked from commit bb607d07a9)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* When creating a new account (via domain admin) it is possible to select “root admin” as the role for the new user (#2606)
* create account with domain admin showing 'root admin' role
Domain admins should not be able to assign the role of root admin to new users. Therefore, the role ‘root admin’ (or any other of the same type) should not be visible to domain admins.
* License and formatting
* Break long sentence into multiple lines
* Fix wording of method 'getCurrentAccount'
* fix typo in variable name
* [CLOUDSTACK-10259] Missing float part of secondary storage data in listAccounts
* [CLOUDSTACK-9338] ACS not accounting resources of VMs with custom service offering
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
* [CLOUDSTACK-10230] User should not be able to use removed “Guest OS type” (#2404)
* [CLOUDSTACK-10230] User is able to change to “Guest OS type” that has been removed
Users are able to change the OS type of VMs to “Guest OS type” that has been removed. This becomes a security issue when we try to force users to use HVM VMs (Meltdown/Spectre thing). A removed “guest os type” should not be usable by any users in the cloud.
* Remove trailing lines that are breaking build due to checkstyle compliance
* Remove unused imports
* fix classes that were in the wrong folder structure
* Updates to capacity management
This moves db upgrade paths and checks around a new systemvmtemplate
for 4.11.1. The new systemvmtemplate compared to 4.11.0 template
is slightly smaller and has meltdown/spectre fixes among few other
security fixes from Debian and changes to cloud-early-config.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* [CLOUDSTACK-10323] Allow changing disk offering during volume migration
This is a continuation of work developed on PR #2425 (CLOUDSTACK-10240), which provided root admins an override mechanism to move volumes between storage systems types (local/shared) even when the disk offering would not allow such operation. To complete the work, we will now provide a way for administrators to enter a new disk offering that can reflect the new placement of the volume. We will add an extra parameter to allow the root admin inform a new disk offering for the volume. Therefore, when the volume is being migrated, it will be possible to replace the disk offering to reflect the new placement of the volume.
The API method will have the following parameters:
* storageid (required)
* volumeid (required)
* livemigrate(optional)
* newdiskofferingid (optional) – this is the new parameter
The expected behavior is the following:
* If “newdiskofferingid” is not provided the current behavior is maintained. Override mechanism will also keep working as we have seen so far.
* If the “newdiskofferingid” is provided by the admin, we will execute the following checks
** new disk offering mode (local/shared) must match the target storage mode. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** we will check if the new disk offering tags match the target storage tags. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** check if the target storage has the capacity for the new volume. If it does not have enough space, then an exception is thrown and the operator will receive a message indicating the problem.
** check if the size of the volume is the same as the size of the new disk offering. If it is not the same, we will ALLOW the change of the service offering, and a warning message will be logged.
We execute the change of the Disk offering as soon as the migration of the volume finishes. Therefore, if an error happens during the migration and the volume remains in the original storage system, the disk offering will keep reflecting this situation.
* Code formatting
* Adding a test to cover migration with new disk offering (#4)
* Adding a test to cover migration with new disk offering
* Update test_volumes.py
* Update test_volumes.py
* fix test_11_migrate_volume_and_change_offering
* Fix typo in Java doc
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
* Add stack traces information
* update stack trace info
* update stack trace to make them consistent
* update stack traces
* update stacktraces
* update stacktraces for other similar situations
* fix some other situations
* enhance other situations
* Create database upgrade from 4.11.0.0 to 4.11.1.0 & VMWare version to OS mappings (#2490)
* Create database upgrade from 4.11.0.0 to 4.11.1.0. Add missing VMWare version to OS mapping SQL in the schema-41100to41110.sql.
* add unit test and add 4.11.0.0 entry to _upgradeMap
* upgrade 4.11.1 to 4.12 definition
* applied Nitin's comments
* Create database upgrade from 4.11.0.0 to 4.11.1.0. Add missing VMWare version to OS mapping SQL in the schema-41100to41110.sql.
* add unit test and add 4.11.0.0 entry to _upgradeMap
CLOUDSTACK-10341: VR minor fixes to systemvmtemplate (#2468)
CLOUDSTACK-10340: Add setter to hypervisorType in VMInstanceVO (#2504)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- new flag `-T, --use-timestamp` to use `timestamp` when POM version contains SNAPSHOT
- in the final artifacts (jar) name
- in the final package (rpm, deb) name
- in `/etc/cloudstack-release` file of SystemVMs
- in the Management Server > About dialog
- if there's a "branding" string in the POM version (e.g. `x.y.z.a-NAME[-SNAPSHOT]`),
the branding name will be used in the final generated pacakge name such as following:
- `cloudstack-management-x.y.z.a-NAME.NUMBER.el7.centos.x86_64`
- `cloudstack-management_x.y.z.a-NAME-NUMBER~xenial_all.deb`
- branding string can be overriden with newly added `-b, --brand` flag
- handle the new format version for VR version
- fix long opts (they were broken)
- tolerate and show a warning message for unrecognized flags
- usage help reformat
* Deprecate Version class in favor or CloudStackVersion
* CLOUDSTACK-8855 Improve Error Message for Host Alert State
* [CLOUDSTACK-9846] create column to save the content of alert messages
Remove declaration of throws CloudRuntimeException
I also removed some unused variables and comments left behind
This closes#837
* Isolate a problematic test "smoke/test_certauthority_root"
* [CLOUDSTACK-10314] Add Text-Field to each ACL Rule
It is interesting to have a text field (e.g. CHAR-256) added to each ACL rule, which allows to enter a "reason" for each FW Rule created. This is valuable for customer documentation, as well as best practice for an evidence towards auditing the system
* Formatting to make check style happy and code clean ups
* [CLOUDSTACK-10240] ACS cannot migrate a volume from local to shared storage.
CloudStack is logically restricting the migration of local storages to shared storage and vice versa. This restriction is a logical one and can be removed for XenServer deployments. Therefore, we will enable migration of volumes between local-shared storages in XenServers independently of their service offering. This will work as an override mechanism to the disk offering used by volumes. If administrators want to migrate local volumes to a shared storage, they should be able to do so (the hypervisor already allows that). The same the other way around.
* Cleanups implemented while working on [CLOUDSTACK-10240]
* Fix test case test_03_migrate_options_storage_tags
The changes applied were:
- When loading hypervisors capabilities we must use "default" instead of nulls
- "Enable" storage migration for simulator hypervisor
- Remove restriction on "ClusterScopeStoragePoolAllocator" to find shared pools
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
Automate dynamic roles migration for missing props file
- In case commands.properties file is missing, enables dynamic roles.
- Adds a new -D or --default flag to migrate-dynamicroles.py script
to simply update the global setting and use the default role-rule
permissions.
- Add warning message, ask admins to move to dynamic roles during upgrade
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Wei Zhou
Gabriel Beims Bräscher
Daan Hoogland
Anurag Awasthi
Andrija Panic
Rakesh
Rohit Yadav
Paul Angus
Nicolas Vazquez
Gabriel Beims Bräscher
Sid Kattoju
Abhishek Kumar
Wei Zhou
Abhishek Kumar
Rohit Yadav
Marc-Aurèle Brothier
Frank Maximus
Nathan Johnson
dahn
Matheus Marabesi
Andrija Panic
Gabriel Beims Bräscher
Bitworks LLC
Mike Tutkowski
Kui LIU
Khosrow Moossavi
Rafael Weingärtner
lzh3636
SowjanyaPatha
ernjvr
Daan Hoogland
Mike Tutkowski
brett
lzh3636