Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR introduces several features and fixes some bugs:
- account tags feature
- fixed resource tags bugs which happened during tags search (found wrong entries because of mysql string to number translation - see #905, but this PR does more and fixes also resource access - vulnerability during list resource tags)
- some marvin improvements (speed, sanity)
Improved resource tags code:
1. Enhanced listTags security
2. Added support for account tags (account tags are required to support tags common for all users of an account)
3. Improved the tag management code (refactoring and cleanup)
Marvin:
1. Fixed Marvin wait timeout between async pools. To decrease polling interval and improve CI speed.
2. Fixed /tmp/ to /tmp in zone configuration files.
3. Fixed + to os.path.join in log class.
4. Fixed + to os.path.join in deployDataCenter class.
5. Fixed typos in tag tests.
6. Modified Tags base class delete method.
Deploy Datacenter script:
1. Improved deployDatacenter. Added option logdir to specify where script places results of evaluation.
ConfigurationManagerImpl:
1. Added logging to ConfigurationManagerImpl to log when vlan is not found. Added test stubs for tags. Found accidental exception during simulator running after CI.
tests_tags.py:
1. Fixed stale undeleted tags.
2. Changed region:India to scope:TestName.
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
- Several systemvmtemplate optimizations
- Uses new macchinina template for running smoke tests
- Switch to latest Debian 9.3.0 release for systemvmtemplate
- Introduce a new `get_test_template` that uses tiny test template
such as macchinina as defined test_data.py
- rVR related fixes and improvements
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows CloudStack administrators to create layer 2 networks on CloudStack. As these networks are purely layer 2, they don't require IP addresses or Virtual Router, only VLAN is necessary (provided by administrator or assigned by CloudStack). Also, network services should be handled externally, e.g. DNS, DHCP, as they are not provided by L2 networks.
As a consequence, a new Guest Network type is created within CloudStack: L2
Description:
Network offerings and networks support new guest type: L2.
L2 Network offering creation allows administrator to select Specify VLAN or let CloudStack assign it dynamically.
L2 Network creation allows administrator to specify VLAN tag (if network offerings allows it) or simply create network.
VM deployments on L2 networks:
VMs should not IP addresses or any network service
No Virtual Router deployed on network
If Specify VLAN = true for network offering, network gets implemented using a dynamically assigned VLAN
UI changes
A new button is added on Networks tab, available for admins, to allow L2 networks creation
* VSP ID Caching
* VSP call Statistics
* 5.0 Support
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Added ability to specify mac in deployVirtualMachine and
addNicToVirtualMachine api endpoints.
Validates mac address to be in the form of:
aa:bb:cc:dd:ee:ff , aa-bb-cc-dd-ee-ff , or aa.bb.cc.dd.ee.ff.
Ensures that mac address is a Unicast mac.
Ensures that the mac address is not already allocated for the
specified network.
Configure a PF rule Private port : Start port ; 20 ENd POrt 25 || Public Port : Start port 20 ; ENd Port : 25.
Trigger UpdatePortForwardingRule api
ApI fails with following error : " Unable to update the private port of port forwarding rule as the rule has port range "
Solution-
Port range gets modified
This allows native CloudStack users to change password in UI when LDAP
is enabled. Overall changes:
- A new usersource returned in the listUsers response
- Removed ldap check in the UI, replaced with check based on user source
- DB changes to include user.source in user_view
- Changed UI error message for non-native users trying to change password
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
As of now, CloudStack can automatically import LDAP users based on the
configuration to a domain or an account. However, any new users in LDAP
aren't automatically reflected. The admin has to manually import them
again.
This feature enables admin to map LDAP group/OU to a CloudStack domain
and any changes are reflected in ACS as well.
This fixes the agreed upon url on download.cloudstack.org in various
sql files and misc scripts.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This adds support for virtio-scsi on KVM hosts, either
for guests that are associated with a new os_type of 'Other PV Virtio-SCSI (64-bit)',
or when a VM or template is regstered with a detail parameter rootDiskController=scsi.
Update cloudstack add template dialog to allow for selecting rootDiskController with KVM
Update cloudstack kvm virtio-scsi to enable discard=unmap
XenServer 7 SupportThis PR adds support for XenServer 7. I have manually done the following tests
- Create a new cluster with XenServer7
- Add Primary storage: Should create an SR on XS7
- Add another XS7 host to the Pool
- Add host2 to Cloudstack
- Create VM1 from template
- Create VM2 from template
- Ping/SSH VM1 to VM2 and vice-versa
- Stop/Delete/Expunge VM2
- Create Data disk
- Attach it to VM1
- Create VM snaphsot of VM1
- Restore VM snapshot of VM1
- Delete VM snapshot of VM1
- Create Volume snapshot of Datadisk
- Create volume snapshot of Root disk
- Create new template from snapshot of root disk
- Create volume from snapshot of datadisk
- Detach datadisk volume
- Delete datadisk volume
- Aquire a public IP
- Create a static nat to VM1
- Live migrate VM1 while traffic on VM
- Delete VM1
* pr/1711:
[CLOUDSTACK-9662] Add support for XenServer 7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9321 : Multiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg fileMultiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg file. Moreover, each time a new Internal LB rule is added to the corresponding InternalLbVm instance, it replaces the existing one. Thus, traffic corresponding to these un-resolved (old) Internal LB rules are getting dropped by the InternalLbVm instance.
PR contents:
1) Fix for this bug.
2) Marvin test coverage for Internal LB feature on master with native ACS setup (component directory) including validations for this bug fix.
3) Enhancements on our exiting Internal LB Marvin test code (nuagevsp plugins directory) to validate this bug fix.
4) PEP8 & PyFlakes compliance with the added Marvin test code.
* pr/1577:
CLOUDSTACK-9321 : Multiple Internal LB rules (more than one Internal LB rule with same source IP address) are not getting resolved in the corresponding InternalLbVm instance's haproxy.cfg file
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Rohit Yadav
Mike Tutkowski
Frank Maximus
Abhinandan Prateek
Bitworks Software, Ltd
Nicolas Vazquez
Boris Stoyanov - a.k.a Bobby
dahn
Sigert Goeminne
Sigert Goeminne
Frank Maximus
Mike Tutkowski
Daan Hoogland
Harika Punna
Nathan Johnson
mrunalinikankariya
Sowmya Krishnan
Rajani Karuturi
Rajani Karuturi
Sarath Kasi
Jayapal
shweta
shweta agarwal
Mowgli
Daan Hoogland
Suresh Sadhu
Nathan Johnson
nvazquez
Syed