#Licensed to the Apache Software Foundation (ASF) under one
#or more contributor license agreements.  See the NOTICE file
#distributed with this work for additional information
#regarding copyright ownership.  The ASF licenses this file
#to you under the Apache License, Version 2.0 (the
#"License"); you may not use this file except in compliance
#with the License.  You may obtain a copy of the License at
#http://www.apache.org/licenses/LICENSE-2.0
#Unless required by applicable law or agreed to in writing,
#software distributed under the License is distributed on an
#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#KIND, either express or implied.  See the License for the
#specific language governing permissions and limitations
#under the License.
# 
# Translators:
msgid ""
msgstr ""
"Project-Id-Version: Apache CloudStack Docs\n"
"POT-Creation-Date: 2013-03-19T13:38:02\n"
"PO-Revision-Date: 2012-09-24 02:47+0000\n"
"Last-Translator: Automatically generated\n"
"Language-Team: None\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ko_KR\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. Tag: title
#, no-c-format
msgid "Basic Zone Configuration"
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"After you select Basic in the Add Zone wizard and click Next, you will be "
"asked to enter the following details. Then click Next."
msgstr ""

#. Tag: para
#, no-c-format
msgid "<emphasis role=\"bold\">Name.</emphasis> A name for the zone."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">DNS 1 and 2.</emphasis> These are DNS servers for "
"use by guest VMs in the zone. These DNS servers will be accessed via the "
"public network you will add later. The public IP addresses for the zone must"
" have a route to the DNS server named here."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Internal DNS 1 and Internal DNS 2.</emphasis> These "
"are DNS servers for use by system VMs in the zone (these are VMs used by "
"&PRODUCT; itself, such as virtual routers, console proxies, and Secondary "
"Storage VMs.) These DNS servers will be accessed via the management traffic "
"network interface of the System VMs. The private IP address you provide for "
"the pods must have a route to the internal DNS server named here."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Hypervisor.</emphasis> (Introduced in version 3.0.1)"
" Choose the hypervisor for the first cluster in the zone. You can add "
"clusters with different hypervisors later, after you finish adding the zone."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Network Offering.</emphasis> Your choice here "
"determines what network services will be available on the network for guest "
"VMs."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Network Offering"
msgstr "네트워크 제공"

#. Tag: para
#, no-c-format
msgid "Description"
msgstr "설명"

#. Tag: para
#, no-c-format
msgid "DefaultSharedNetworkOfferingWithSGService"
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"If you want to enable security groups for guest traffic isolation, choose "
"this. (See Using Security Groups to Control Traffic to VMs.)"
msgstr ""

#. Tag: para
#, no-c-format
msgid "DefaultSharedNetworkOffering"
msgstr ""

#. Tag: para
#, no-c-format
msgid "If you do not need security groups, choose this."
msgstr ""

#. Tag: para
#, no-c-format
msgid "DefaultSharedNetscalerEIPandELBNetworkOffering"
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"If you have installed a Citrix NetScaler appliance as part of your zone "
"network, and you will be using its Elastic IP and Elastic Load Balancing "
"features, choose this. With the EIP and ELB features, a basic zone with "
"security groups enabled can offer 1:1 static NAT and load balancing."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Network Domain.</emphasis> (Optional) If you want to"
" assign a special domain name to the guest VM network, specify the DNS "
"suffix."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Public.</emphasis> A public zone is available to all"
" users. A zone that is not public will be assigned to a particular domain. "
"Only users in that domain will be allowed to create guest VMs in this zone."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Choose which traffic types will be carried by the physical network."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"The traffic types are management, public, guest, and storage traffic. For "
"more information about the types, roll over the icons to display their tool "
"tips, or see Basic Zone Network Traffic Types. This screen starts out with "
"some traffic types already assigned. To add more, drag and drop traffic "
"types onto the network. You can also change the network name if desired."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"3. (Introduced in version 3.0.1) Assign a network traffic label to each "
"traffic type on the physical network. These labels must match the labels you"
" have already defined on the hypervisor host. To assign each label, click "
"the Edit button under the traffic type icon. A popup dialog appears where "
"you can type the label, then click OK."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"These traffic labels will be defined only for the hypervisor selected for "
"the first cluster. For all other hypervisors, the labels can be configured "
"after the zone is created."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Click Next."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"(NetScaler only) If you chose the network offering for NetScaler, you have "
"an additional screen to fill out. Provide the requested details to set up "
"the NetScaler, then click Next."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">IP address.</emphasis> The NSIP (NetScaler IP) "
"address of the NetScaler device."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Username/Password.</emphasis> The authentication "
"credentials to access the device. &PRODUCT; uses these credentials to access"
" the device."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Type.</emphasis> NetScaler device type that is being"
" added. It could be NetScaler VPX, NetScaler MPX, or NetScaler SDX. For a "
"comparison of the types, see About Using a NetScaler Load Balancer."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Public interface.</emphasis> Interface of NetScaler "
"that is configured to be part of the public network."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Private interface.</emphasis> Interface of NetScaler"
" that is configured to be part of the private network."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Number of retries.</emphasis> Number of times to "
"attempt a command on the device before considering the operation failed. "
"Default is 2."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Capacity.</emphasis> Number of guest "
"networks/accounts that will share this NetScaler device."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Dedicated.</emphasis> When marked as dedicated, this"
" device will be dedicated to a single account. When Dedicated is checked, "
"the value in the Capacity field has no significance – implicitly, its value "
"is 1."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"(NetScaler only) Configure the IP range for public traffic. The IPs in this "
"range will be used for the static NAT capability which you enabled by "
"selecting the network offering for NetScaler with EIP and ELB. Enter the "
"following details, then click Add. If desired, you can repeat this step to "
"add more IP ranges. When done, click Next."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Gateway.</emphasis> The gateway in use for these IP "
"addresses."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Netmask.</emphasis> The netmask associated with this"
" IP range."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">VLAN.</emphasis> The VLAN that will be used for "
"public traffic."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Start IP/End IP.</emphasis> A range of IP addresses "
"that are assumed to be accessible from the Internet and will be allocated "
"for access to guest VMs."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"In a new zone, &PRODUCT; adds the first pod for you. You can always add more"
" pods later. For an overview of what a pod is, see <xref linkend=\"about-"
"pods\" />."
msgstr ""

#. Tag: para
#, no-c-format
msgid "To configure the first pod, enter the following, then click Next:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "<emphasis role=\"bold\">Pod Name.</emphasis> A name for the pod."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Reserved system gateway.</emphasis> The gateway for "
"the hosts in that pod."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Reserved system netmask.</emphasis> The network "
"prefix that defines the pod's subnet. Use CIDR notation."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Start/End Reserved System IP.</emphasis> The IP "
"range in the management network that &PRODUCT; uses to manage various system"
" VMs, such as Secondary Storage VMs, Console Proxy VMs, and DHCP. For more "
"information, see System Reserved IP Addresses."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"Configure the network for guest traffic. Provide the following, then click "
"Next:"
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Guest gateway.</emphasis> The gateway that the "
"guests should use."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Guest netmask.</emphasis> The netmask in use on the "
"subnet the guests will use."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Guest start IP/End IP.</emphasis> Enter the first "
"and last IP addresses that define a range that &PRODUCT; can assign to "
"guests."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"We strongly recommend the use of multiple NICs. If multiple NICs are used, "
"they may be in a different subnet."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"If one NIC is used, these IPs should be in the same CIDR as the pod CIDR."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"In a new pod, &PRODUCT; adds the first cluster for you. You can always add "
"more clusters later. For an overview of what a cluster is, see About "
"Clusters."
msgstr ""

#. Tag: para
#, no-c-format
msgid "To configure the first cluster, enter the following, then click Next:"
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Hypervisor.</emphasis> (Version 3.0.0 only; in "
"3.0.1, this field is read only) Choose the type of hypervisor software that "
"all hosts in this cluster will run. If you choose VMware, additional fields "
"appear so you can give information about a vSphere cluster. For vSphere "
"servers, we recommend creating the cluster of hosts in vCenter and then "
"adding the entire cluster to &PRODUCT;. See Add Cluster: vSphere."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Cluster name.</emphasis> Enter a name for the "
"cluster. This can be text of your choosing and is not used by &PRODUCT;."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"In a new cluster, &PRODUCT; adds the first host for you. You can always add "
"more hosts later. For an overview of what a host is, see About Hosts."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"When you add a hypervisor host to &PRODUCT;, the host must not have any VMs "
"already running."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"Before you can configure the host, you need to install the hypervisor "
"software on the host. You will need to know which version of the hypervisor "
"software version is supported by &PRODUCT; and what additional configuration"
" is required to ensure the host will work with &PRODUCT;. To find these "
"installation details, see:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Citrix XenServer Installation and Configuration"
msgstr ""

#. Tag: para
#, no-c-format
msgid "VMware vSphere Installation and Configuration"
msgstr ""

#. Tag: para
#, no-c-format
msgid "KVM vSphere Installation and Configuration"
msgstr ""

#. Tag: para
#, no-c-format
msgid "To configure the first host, enter the following, then click Next:"
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Host Name.</emphasis> The DNS name or IP address of "
"the host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "<emphasis role=\"bold\">Username.</emphasis> The username is root."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Password.</emphasis> This is the password for the "
"user named above (from your XenServer or KVM install)."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Host Tags.</emphasis> (Optional) Any labels that you"
" use to categorize hosts for ease of maintenance. For example, you can set "
"this to the cloud's HA tag (set in the ha.tag global configuration "
"parameter) if you want this host to be used only for VMs with the \"high "
"availability\" feature enabled. For more information, see HA-Enabled Virtual"
" Machines as well as HA for Hosts."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"In a new cluster, &PRODUCT; adds the first primary storage server for you. "
"You can always add more servers later. For an overview of what primary "
"storage is, see About Primary Storage."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"To configure the first primary storage server, enter the following, then "
"click Next:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "<emphasis role=\"bold\">Name.</emphasis> The name of the storage device."
msgstr ""

#. Tag: para
#, no-c-format
msgid ""
"<emphasis role=\"bold\">Protocol.</emphasis> For XenServer, choose either "
"NFS, iSCSI, or PreSetup. For KVM, choose NFS, SharedMountPoint,CLVM, or RBD."
" For vSphere choose either VMFS (iSCSI or FiberChannel) or NFS. The "
"remaining fields in the screen vary depending on what you choose here."
msgstr ""