Prevents errors while migrating VM from ISO:
Test 1: Deploy VM from ISO -> Live migrate VM to another host -> ERROR
Test 2: Register ISO using Direct Download on KVM -> Deploy VM from ISO -> Live migrate VM to another host -> ERROR
- Prevent NullPointerException migrating VM from ISO
- Prevent mount secondary storage on ISO direct downloads on KVM
Since we support only Ubuntu 16.04+ on master/4.12+, we can now use
the libvirt service name `libvirtd` for all distributions. This also
fixes an optional package name for libvirtd installation on Debian 9+.
Fixes#2909
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Windows has support for several paravirt features that it will use when running on Hyper-V, Microsoft's hypervisor. These features are called enlightenments. Many of the features are similar to paravirt functionality that exists with Linux on KVM (virtio, kvmclock, PV EOI, etc.)
Nowadays QEMU/KVM can also enable support for several Hyper-V enlightenments. When enabled, Windows VMs running on KVM will use many of the same paravirt optimizations they would use when running on Hyper-V.
A number of years ago, a PR was introduced that added a good portion of the code to enable this feature set, but it was never completed. This PR enables the existing features. The previous patch set detailed in #1013 also included the tests.
By selecting Windows PV, the enlightenment additions will be applied to the libvirt configuration. This is support on Windows Server 2008 and beyond, so all currently supported versions of Windows Server.
In our testing, we've seen benchmark improvements of around 20-25% running on Centos 7 hosts and it is also supported on Centos/RHEL 6.5 and later. Testing on Ubuntu would be appreciated.
This tries to provide a threshold based fix for #2873 where swappinness of VR is not used until last resort. By limiting swappiness unless actually needed, the VR system degradation can be avoided for most cases. The other change is around not starting baremetal-vr by default on all VRs, according to the spec https://cwiki.apache.org/confluence/display/CLOUDSTACK/Baremetal+Advanced+Networking+Support only vmware VRs need to run it and that too only as the last step of the setup/completion, so we don't need to run it all the time.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[VMware] VM is not accessible after migration across clusters.
Once a VM is successfully started, don't delete the files associated with the unregistered VM, if the files are in a storage that is being used by the new VM.
Attempt to unregister a VM in another DC, only if there is a host associated with a VM.
This closes#556
When a Instance is (attempted to be) started in KVM Host the Agent
should not worry about the allocated memory on this host.
To make a proper judgement we need to take more into account:
- Memory Overcommit ratio
- Host reserved memory
- Host overcommit memory
The Management Server has all the information and the DeploymentPlanner
has to make the decision if a Instance should and can be started on a
Host, not the host itself.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This fixes#2763 by moving a post cert-renewal class for kvm
plugin/hypervisor to src/main/java. The regression is due to change
in file-system layout due to maven standard refactoring on master and
issue was not caught during forward-merging of a PR from 4.11 branch.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Cleaup and code-formatting POM files
* Remove obsolete mycila license-maven-plugin
* Remove obsolete console-proxy/plugin project
* Move console-proxy-rdbconsole under console-proxy parent
* Use correct parent path for rdpconsole
* Order alphabetally items in setnextversion.sh
* Unifiy License header in POMs
* Alphabetic order of modules definition
* Extract all defined versions into parent pom
* Remove obsolete files: version-info.in, configure-info.in
* Remove redundant defaultGoal
* Remove useless checkstyle plugin from checkstyle project
* Order alphabetally items in pom.xml
* Add aditional SPACEs to fix debian build
* Don't execute checkstyle on parent projects
* Use UTF-8 encoding in building checkstyle project
* Extract plugin versions into properties
* Execute PMD plugin on all the projects with -Penablefindbugs
* Upgrade maven plugins to latest version
* Make sure to always look for apache parent pom from repository
* Fix incorrect version grep in debian packaging
* Fix rebase conflicts
* Fix rebase conflicts
* Remove PMD for now to be fixed on another PR
This is a new feature for CS that allows Admin users improved
troubleshooting of network issues in CloudStack hosted networks.
Description: For troubleshooting purposes, CloudStack administrators may wish to execute network utility commands remotely on system VMs, or request system VMs to ping/traceroute/arping to specific addresses over specific interfaces. An API command to provide such functionalities is being developed without altering any existing APIs. The targeted system VMs for this feature are the Virtual Router (VR), Secondary Storage VM (SSVM) and the Console Proxy VM (CPVM).
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+Remote+Diagnostics+API
ML discussion:
https://markmail.org/message/xt7owmb2c6iw7tva
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
This ensure that fewer mount points are made on hosts for either
primary storagepools or secondary storagepools.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Now the KVM agent checks whether a storage pool is mounted or not mounted before calling storagePoolCreateXML().
Signed-off-by: Kai Takahashi <k-takahashi@creationline.com>
This introduces a new global setting `vm.configdrive.primarypool.enabled` to toggle creation/hosting of config drive iso files on primary storage, the default will be false causing them to be hosted on secondary storage. The current support is limited from hypervisor resource side and in current implementation limited to `KVM` only. The next big change is that config drive is created at a temporary location by management server and shipped to either KVM or SSVM agent via cmd-answer pattern, the data of which is not logged in logs. This saves us from adding genisoimage dependency on cloudstack-agent pkg.
The APIs to reset ssh public key, password and user-data (via update VM API) requires that VM should be shutdown. Therefore, in the refactoring I removed the case of updation of existing ISO. If there are objections I'll re-put the strategy to detach+attach new config iso as a way of updation. In the refactored implementation, the folder name is changed to lower-cased configdrive. And during VM start, migration or shutdown/removal if primary storage is enable for use, the KVM agent will handle cleanup tasks otherwise SSVM agent will handle them.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In 4.11.0, I added the ability to online migrate volumes from NFS to managed storage. This actually works for Ceph to managed storage in a private 4.8 branch, as well. I thought I had brought along all of the necessary code from that private 4.8 branch to make Ceph to managed storage functional in 4.11.0, but missed one piece (which is fixed by this PR).
* CLOUDSTACK-9184: Fixes#2631 VMware dvs portgroup autogrowth
This deprecates the vmware.ports.per.dvportgroup global setting.
The vSphere Auto Expand feature (introduced in vSphere 5.0) will take
care of dynamically increasing/decreasing the dvPorts when running out
of distributed ports . But in case of vSphere 4.1/4.0 (If used), as this
feature is not there, the new default value (=> 8) have an impact in the
existing deployments. Action item for vSphere 4.1/4.0: Admin should
modify the global configuration setting "vmware.ports.per.dvportgroup"
from 8 to any number based on their environment because the proposal
default value of 8 would be very less without auto expand feature in
general. The current default value of 256 may not need immediate
modification after deployment, but 8 would be very less which means
admin need to update immediately after upgrade.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10147 Disabled Xenserver Cluster can still deploy VM's. Added code to skip disabled clusters when selecting a host (#2442)
(cherry picked from commit c3488a51db)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10318: Bug on sorting ACL rules list in chrome (#2478)
(cherry picked from commit 4412563f19)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10284:Creating a snapshot from VM Snapshot generates error if hypervisor is not KVM.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10221: Allow IPv6 when creating a Basic Network (#2397)
Since CloudStack 4.10 Basic Networking supports IPv6 and thus
should be allowed to be specified when creating a network.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit 9733a10ecd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10214: Unable to remove local primary storage (#2390)
Allow admins to remove primary storage pool.
Cherry-picked from eba2e1d8a1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* dateutil: constistency of tzdate input and output (#2392)
Signed-off-by: Yoan Blanc <yoan.blanc@exoscale.ch>
Signed-off-by: Daan Hoogland <daan.hoogland@shapeblue.com>
(cherry picked from commit 2ad5202823)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-10054:Volume download times out in 3600 seconds (#2244)
(cherry picked from commit bb607d07a9)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* When creating a new account (via domain admin) it is possible to select “root admin” as the role for the new user (#2606)
* create account with domain admin showing 'root admin' role
Domain admins should not be able to assign the role of root admin to new users. Therefore, the role ‘root admin’ (or any other of the same type) should not be visible to domain admins.
* License and formatting
* Break long sentence into multiple lines
* Fix wording of method 'getCurrentAccount'
* fix typo in variable name
* [CLOUDSTACK-10259] Missing float part of secondary storage data in listAccounts
* [CLOUDSTACK-9338] ACS not accounting resources of VMs with custom service offering
ACS is accounting the resources properly when deploying VMs with custom service offerings. However, there are other methods (such as updateResourceCount) that do not execute the resource accounting properly, and these methods update the resource count for an account in the database. Therefore, if a user deploys VMs with custom service offerings, and later this user calls the “updateResourceCount” method, it (the method) will only account for VMs with normal service offerings, and update this as the number of resources used by the account. This will result in a smaller number of resources to be accounted for the given account than the real used value. The problem becomes worse because if the user starts to delete these VMs, it is possible to reach negative values of resources allocated (breaking all of the resource limiting for accounts). This is a very serious attack vector for public cloud providers!
* [CLOUDSTACK-10230] User should not be able to use removed “Guest OS type” (#2404)
* [CLOUDSTACK-10230] User is able to change to “Guest OS type” that has been removed
Users are able to change the OS type of VMs to “Guest OS type” that has been removed. This becomes a security issue when we try to force users to use HVM VMs (Meltdown/Spectre thing). A removed “guest os type” should not be usable by any users in the cloud.
* Remove trailing lines that are breaking build due to checkstyle compliance
* Remove unused imports
* fix classes that were in the wrong folder structure
* Updates to capacity management
This adds and allows Ubuntu 18.04 to be used as KVM host. In addition,
on the UI when hypervisor version key is missing, this adds and display
the host os and version detail which is useful to show the KVM host
os and version.
When cache mode 'none' is used for empty cdrom drives, systemvms
and guest VMs fail to start on newer libvirtd such as Ubuntu bionic.
The fix is ensure that cachemode is not declared when drives are empty
upon starting of the VM. Similar issue logged at redhat here:
https://bugzilla.redhat.com/show_bug.cgi?id=1342999
The workaround is to ensure that we don't configure cachemode for
cdrom devices at all. This also fixes live VM migration issue.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The three methods are named as "setXXX", actually, they are not simple setter or getter.
They are further renamed as "generateXXX" with dahn's comments.
This adds support for XenServer 7.3 and 7.4, and XCP-ng 7.4 version as hypervisor hosts. Fixes#2523.
This also fixes the issue of 4.11 VRs stuck in starting for up-to 10mins, before they come up online.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* fix https://issues.apache.org/jira/browse/CLOUDSTACK-10356
* del patch file
* Update ResourceCountDaoImpl.java
* fix some format
* fix code
* fix error message in VolumeOrchestrator
* add check null stmt
* del import unuse class
* use BooleanUtils to check Boolean
* fix error message
* delete unuse function
* delete the deprecated function updateDomainCount
* add error log and throw exception in ProjectManagerImpl.java
This extends securing of KVM hosts to securing of libvirt on KVM
host as well for TLS enabled live VM migration. To simplify implementation
securing of host implies that both host and libvirtd processes are
secured with management server's CA plugin issued certificates.
Based on whether keystore and certificates files are available at
/etc/cloudstack/agent, the KVM agent determines whether to use TLS or
TCP based uris for live VM migration. It is also enforced that a secured
host will allow live VM migration to/from other secured host, and an
unsecured hosts will allow live VM migration to/from other unsecured
host only.
Post upgrade the KVM agent on startup will expose its security state
(secured detail is sent as true or false) to the managements server that
gets saved in host_details for the host. This host detail can be accesed
via the listHosts response, and in the UI unsecured KVM hosts will show
up with the host state of ‘unsecured’. Further, a button has been added
that allows admins to provision/renew certificates to KVM hosts and can
be used to secure any unsecured KVM host.
The `cloudstack-setup-agent` was modified to accept a new flag `-s`
which will reconfigure libvirtd with following settings:
listen_tcp=0
listen_tls=1
tcp_port="16509"
tls_port="16514"
auth_tcp="none"
auth_tls="none"
key_file = "/etc/pki/libvirt/private/serverkey.pem"
cert_file = "/etc/pki/libvirt/servercert.pem"
ca_file = "/etc/pki/CA/cacert.pem"
For a connected KVM host agent, when the certificate are
renewed/provisioned a background task is scheduled that waits until all
of the agent tasks finish after which libvirt process is restarted and
finally the agent is restarted via AgentShell.
There are no API or DB changes.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Add stack traces information
* update stack trace info
* update stack trace to make them consistent
* update stack traces
* update stacktraces
* update stacktraces for other similar situations
* fix some other situations
* enhance other situations
* [CLOUDSTACK-10226] CloudStack is not importing Local storage properly
CloudStack is importing as Local storage any XenServer SR that is of type LVM or EXT. This causes a problem when one wants to use both Direct attach storage and local storage. Moreover, CloudStack was not importing all of the local storage that a host has available when local storage is enabled. It was only importing the First SR it sees.
To fix the first problem we started ignoring SRs that have the flag shared=true when discovering local storages. SRs configured to be shared are used as direct attached storage, and therefore should not be imported again as local ones.
To fix the second problem, we started loading all Local storage and importing them accordingly to ACS.
* Cleanups and formatting
* [CLOUDSTACK-10241] Duplicated file SRs being created in XenServer pools
Due to a race condition between multiple management servers, in some rare cases, CloudStack is creating multiple file SRs to the same secondary folder. This causes a problem when introducing the SR to the XenServer pools, as “there will be VDIs with duplicated UUIDs“. The VDIs are the same, but they are seen in different SRs, and therefore cause an error.
The solution to avoid race conditions between management servers is to use a deterministic srUuid for the file SR to be created (we are leaving XenServer with the burden of managing race conditions). The UUID is based on the SR file path and is generated using UUID#nameUUIDFromBytes. Therefore, if there is an SR with the generated UUID, this means that some other management server has just created it. An exception will occur and it will contain a message saying 'Db_exn.Uniqueness_constraint_violation'. In these unlikely events, we catch the exception and use the method retrieveAlreadyConfiguredSrWithoutException to get the SR that has already been created for the given mount point.
Several fixes addressed:
- Dettach ISO fails when trying to detach a direct download ISO
- Fix for metalink support on SSVM agents (this closes CLOUDSTACK-10238)
- Reinstall VM from bypassed registered template (this closes CLOUDSTACK-10250)
- Fix upload certificate error message even though operation was successful
- Fix metalink download, checksum retry logic and metalink SSVM downloader
* Refactored nuage tests
Added simulator support for ConfigDrive
Allow all nuage tests to run against simulator
Refactored nuage tests to remove code duplication
* Move test data from test_data.py to nuage_test_data.py
Nuage test data is now contained in nuage_test_data.py instead of
test_data.py
Removed all nuage test data from nuage_test_data.py
* CLOUD-1252 fixed cleanup of vpc tier network
* Import libVSD into the codebase
* CLOUDSTACK-1253: Volumes are not expunged in simulator
* Fixed some merge issues in test_nuage_vsp_mngd_subnets test
* Implement GetVolumeStatsCommand in Simulator
* Add vspk as marvin nuagevsp dependency, after removing libVSD dependency
* correct libVSD files for license purposes
pep8 pyflakes compliant
* Update the displayText of XenServer ISO when it already exist in the DB
Besides updating the ISO display text, I also created unit test cases for 'createXenServerToolsIsoEntryInDatabase' and 'getActualIsoTemplate' methods.
* Formatting and cleanups for checkstyle of changed classes
There is a race condition in the monitoring of the migration process on KVM. If the monitor wakes up in the tight window after the migration succeeds, but before the migration thread terminates, the monitor will get a LibvirtException “Domain not found: no domain with matching uuid” when checking on the migration status. This in turn causes CloudStack to sync the VM state to stop, in which it issues a defensive StopCommand to ensure it is correctly synced.
Fix: Prevent LibvirtException: "Domain not found" caused by the call to dm.getInfo()
CLOUDSTACK-10269: On deletion of role set name to null (#2444)
CLOUDSTACK-10146 checksum in java instead of script (#2405)
CLOUDSTACK-10222: Clean snaphosts from primary storage when taking (#2398)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When user creates a snapshot (manual or recurring), snapshot remains on
the primary storage, even if the snapshot is transferred successfully to
secondary storage. This is causing issues because XenServer can only hold
a limited number of snapshots in its VDI chain, preventing the user from
creating new snapshots after some time, when too many old snapshots are
present on the primary storage.
This fixes move refactoring error introduced in #2283
For instance, the class DatadiskTO is supposed to be in com.cloud.agent.api.to package. However, the folder structure it was placed in is com.cloud.agent.api.api.to.
Skip tests for cloud-plugin-hypervisor-ovm3:
For some unknown reason, there are quite a lot of broken test cases for cloud-plugin-hypervisor-ovm3. They might have appeared after some dependency upgrade and was overlooked by the person updating them. I checked them to see if they could be fixed, but these tests are not developed in a clear and clean manner. On top of that, we do not see (at least I) people using OVM3-hypervisor with ACS. Therefore, I decided to skip them.
Identention corrected to use spaces instead of tabs in XML files
Remove maven standard module (which only a few were using) and get ride of maven customization for the projects structure.
- moved all directories to src/main/java, src/main/resources, src/main/scripts, src/test/java, src/test/resources
- grep scan to search for src/com and src/org left over
- grep for <project>/scripts to fix pom.xml configuration
- remove custom <build> configuration in pom.xml
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
The documentation of Libvirt specifies the requirement of using an XML namespace,
when having metadata in the Domain XML. The Nuage extenstion metadata was not
adhering to this specification, and the lastest Libvirt version ignores it in that case.
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This happens when the root disk size is overridden. The primary storage limit check should be performed based on overridden size instead of template size. Enabled root disk resize tests to run on simulator as well.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
The first PR(#1176) intended to solve #CLOUDSTACK-9025 was only tackling the problem for CloudStack deployments that use single hypervisor types (restricted to XenServer). Additionally, the lack of information regarding that solution (poor documentation, test cases and description in PRs and Jira ticket) led the code to be removed in #1124 after a long discussion and analysis in #1056. That piece of code seemed logicless (and it was!). It would receive a hostId and then change that hostId for other hostId of the zone without doing any check; it was not even checking the hypervisor and storage in which the host was plugged into.
The problem reported in #CLOUDSTACK-9025 is caused by partial snapshots that are taken in XenServer. This means, we do not take a complete snapshot, but a partial one that contains only the modified data. This requires rebuilding the VHD hierarchy when creating a template out of the snapshot. The point is that the first hostId received is not a hostId, but a system VM ID(SSVM). That is why the code in #1176 fixed the problem for some deployment scenarios, but would cause problems for scenarios where we have multiple hypervisors in the same zone. We need to execute the creation of the VHD that represents the template in the hypervisor, so the VHD chain can be built using the parent links.
This commit changes the method com.cloud.hypervisor.XenServerGuru.getCommandHostDelegation(long, Command). From now on we replace the hostId that is intended to execute the “copy command” that will create the VHD of the template according to some conditions that were already in place. The idea is that starting with XenServer 6.2.0 hotFix ESP1004 we need to execute the command in the hypervisor host and not from the SSVM. Moreover, the method was improved making it readable and understandable; it was also created test cases assuring that from XenServer 6.2.0 hotFix ESP1004 and upward versions we change the hostId that will be used to execute the “copy command”.
Furthermore, we are not selecting a random host from a zone anymore. A new method was introduced in the HostDao called “findHostConnectedToSnapshotStoragePoolToExecuteCommand”, using this method we look for a host that is in the cluster that is using the storage pool where the volume from which the Snaphost is taken of. By doing this, we guarantee that the host that is connected to the primary storage where all of the snapshots parent VHDs are stored is used to create the template.
Consider using Disabled hosts when no Enabled hosts are found
This also closes#2317
* Cleanup and Improve NetUtils
This class had many unused methods, inconsistent names and redundant code.
This commit cleans up code, renames a few methods and constants.
The global/account setting 'api.allowed.source.cidr.list' is set
to 0.0.0.0/0,::/0 by default preserve the current behavior and thus
allow API calls for accounts from all IPv4 and IPv6 subnets.
Users can set it to a comma-separated list of IPv4/IPv6 subnets to
restrict API calls for Admin accounts to certain parts of their network(s).
This is to improve Security. Should an attacker steal the Access/Secret key
of an account he/she still needs to be in a subnet from where accounts are
allowed to perform API calls.
This is a good security measure for APIs which are connected to the public internet.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This includes test related fixes and code review fixes based on
reviews from @rafaelweingartner, @marcaurele, @wido and @DaanHoogland.
This also includes VMware disk-resize limitation bug fix based on comments
from @sateesh-chodapuneedi and @priyankparihar.
This also includes the final changes to systemvmtemplate and fixes to
code based on issues found via test failures.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Resize for VMware root disk should only be performed during VM start
when vmware.create.full.clone is true i.e. the disk chain length is one.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Refactors and simplifies systemvm codebase file structures keeping
the same resultant systemvm.iso packaging
- Password server systemd script and new postinit script that runs
before sshd starts
- Fixes to keepalived and conntrackd config to make rVRs work again
- New /etc/issue featuring ascii based cloudmonkey logo/message and
systemvmtemplate version
- SystemVM python codebase linted and tested. Added pylint/pep to
Travis.
- iptables re-application fixes for non-VR systemvms.
- SystemVM template build fixes.
- Default secondary storage vm service offering boosted to have 2vCPUs
and RAM equal to console proxy.
- Fixes to several marvin based smoke tests, especially rVR related
tests. rVR tests to consider 3*advert_int+skew timeout before status
is checked.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ports PR #1470 by @remibergsma.
Make the generated json files unique to prevent concurrency issues:
The json files now have UUIDs to prevent them from getting overwritten
before they've been executed. Prevents config to be pushed to the wrong
router.
2016-02-25 18:32:23,797 DEBUG [c.c.a.t.Request] (AgentManager-Handler-1:null) (logid:) Seq 2-4684025087442026584: Processing: { Ans: , MgmtId: 90520732674657, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.routing.GroupA
nswer":{"results":["null - success: null","null - success: [INFO] update_config.py :: Processing incoming file => vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b\n[INFO] Processing JSON file vm_dhcp_entry.json.4ea4506
1-2efb-4467-8eaa-db3d77fb0a7b\n"],"result":true,"wait":0}}] }
On the router:
2016-02-25 18:32:23,416 merge.py __moveFile:298 Processed file written to /var/cache/cloud/processed/vm_dhcp_entry.json.4ea45061-2efb-4467-8eaa-db3d77fb0a7b.gz
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
com.cloud.hypervisor.hyperv.resource.HypervDummyResourceBase
class and change the log message in
com.cloud.hypervisor.hyperv.discoverer.HypervServerDiscoverer
Otherwise we send down a 'null' to a ProcessBuilder in Java instead of a String and this
causes a NPE.
We should check first if the Instance has a IPv6 address before sending it there.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-10160: Fix typo in Libvirt XML definition for Virtio-SCSI
The attribute for the XML element 'controller' should be 'model' and
not 'mode'.
Source: https://libvirt.org/formatdomain.html#elementsControllers
A scsi controller has an optional attribute model, which is one of
'auto', 'buslogic', 'ibmvscsi', 'lsilogic', 'lsisas1068', 'lsisas1078',
'virtio-scsi' or 'vmpvscsi'.
In the current state a regular SCSI device is attached and not a Virtio-SCSI
device.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-10160: Add UnitTest for LibvirtVMDef.SCSIDef
To make sure the XML output string is correct
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This commit adds support for passing IPv6 Addresses and/or Subnets as
Secondary IPs.
This is groundwork for CLOUDSTACK-9853 where IPv6 Subnets have to be
allowed in the Security Groups of Instances to we can add DHCPv6
Prefix Delegation.
Use ; instead of : for separating addresses, otherwise it would cause
problems with IPv6 Addresses.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
- Migrate to embedded Jetty server.
- Improve ServerDaemon implementation.
- Introduce a new server.properties file for easier configuration.
- Have a single /etc/default/cloudstack-management to configure env.
- Reduce shaded jar file, removing unnecessary dependencies.
- Upgrade to Spring 5.x, upgrade several jar dependencies.
- Does not shade and include mysql-connector, used from classpath instead.
- Upgrade and use bountcastle as a separate un-shaded jar dependency.
- Remove tomcat related configuration and files.
- Have both embedded UI assets in uber jar and separate webapp directory.
- Refactor systemd and init scripts, cleanup packaging.
- Made cloudstack-setup-databases faster, using `urandom`.
- Remove unmaintained distro packagings.
- Moves creation and usage of server keystore in CA manager, this
deprecates the need to create/store cloud.jks in conf folder and
the db.cloud.keyStorePassphrase in db.properties file. This also
remove the need of the --keystore-passphrase in the
cloudstack-setup-encryption script.
- GZip contents dynamically in embedded Jetty
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Allow security policies to apply on port groups:
- Accepts security policies while creating network offering
- Deployed network will have security policies from the network offering
applied on the port group (in vmware environment)
- Global settings as fallback when security policies are not defined for a network
offering
- Default promiscuous mode security policy set to REJECT as it's the default
for standard/default vswitch
Portgroup vlan-trunking options for dvswitch: This allows admins to define
a network with comma separated vlan id and vlan
range such as vlan://200-400,21,30-50 and use the provided vlan range to
configure vlan-trunking for a portgroup in dvswitch based environment.
VLAN overlap checks are performed for:
- isolated network against existing shared and isolated networks
- dedicated vlan ranges for the physical/public network for the zone
- shared network against existing isolated network
Allow shared networks to bypass vlan overlap checks: This allows admins
to create shared networks with a `bypassvlanoverlapcheck` API flag
which when set to 'true' will create a shared network without
performing vlan overlap checks against isolated network and against
the vlans allocated to the datacenter's physical network (vlan ranges).
Notes:
- No vlan-range overlap checks are performed when creating shared networks
- Multiple vlan id/ranges should include the vlan:// scheme prefix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Commit enables a new feature for KVM hypervisor which purpose is to increase virtually amount of RAM available beyond the actual limit.
There is a new parameter in agent.properties: host.overcommit.mem.mb which enables adding specified amount of RAM to actually available. It is necessary to utilize KSM and ZSwap features which extend RAM with deduplication and compression.
The watchdog timer adds functionality where the Hypervisor can detect if an
instance has crashed or stopped functioning.
The watchdog timer adds functionality where the Hypervisor can detect if an
instance has crashed or stopped functioning.
When the Instance has the 'watchdog' daemon running it will send heartbeats
to the /dev/watchdog device.
If these heartbeats are no longer received by the HV it will reset the Instance.
If the Instance never sends the heartbeats the HV does not take action. It only
takes action if it stops sending heartbeats.
This is supported since Libvirt 0.7.3 and can be defined in the XML format as
described in the docs: https://libvirt.org/formatdomain.html#elementsWatchdog
To the 'devices' section this will be added:
In the agent.properties the action to be taken can be defined:
vm.watchdog.action=reset
The same goes for the model. The Intel i6300esb is however the most commonly used.
vm.watchdog.model=i6300esb
When the Instance has the 'watchdog' daemon running it will send heartbeats
to the /dev/watchdog device.
If these heartbeats are no longer received by the HV it will reset the Instance.
If the Instance never sends the heartbeats the HV does not take action. It only
takes action if it stops sending heartbeats.
This is supported since Libvirt 0.7.3 and can be defined in the XML format as
described in the docs: https://libvirt.org/formatdomain.html#elementsWatchdog
To the 'devices' section this will be added:
<watchdog model='i6300esb' action='reset'/>
In the agent.properties the action to be taken can be defined:
vm.watchdog.action=reset
The same goes for the model. The Intel i6300esb is however the most commonly used.
vm.watchdog.model=i6300esb
Signed-off-by: Wido den Hollander <wido@widodh.nl>
If there are multiple files with the same name on vmware datastore, search operation may select any one file during volume related operations. This involves volume attach/detach, volume download, volume snapshot etc.
While using NetApp as the backup solution. This has .snapshot folder on the datastore and sometimes files from this folder gets selected during volume operations and the operation fails. Because of wrong selection of file following exception can be observed while volume deletion.
2017-02-23 19:39:05,750 ERROR [c.c.s.r.VmwareStorageProcessor] (DirectAgent-304:ctx-a1dbf5d8 ac.local) delete volume failed due to Exception: java.lang.RuntimeException
Message: Cannot delete file [4cbcd46d44c53f5c8244c0aad26a97e1] .snapshot/hourly.2017-02-23_1605/r-97-VM/ROOT-97.vmdk
To fix this behavior I have added a global configuration by name vmware.search.exclude.folders which can be comma separated list of folder paths.
I have also added a unit test to test the new method.
- All tests should pass on KVM, Simulator
- Add test cases covering FSM state transitions and actions
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Removed three bg thread tasks, uses FSM event-trigger based scheduling
- On successful recovery, kicks VM HA
- Improves overall HA scheduling and task submission, lower DB access
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Host-HA offers investigation, fencing and recovery mechanisms for host that for
any reason are malfunctioning. It uses Activity and Health checks to determine
current host state based on which it may degrade a host or try to recover it. On
failing to recover it, it may try to fence the host.
The core feature is implemented in a hypervisor agnostic way, with two separate
implementations of the driver/provider for Simulator and KVM hypervisors. The
framework also allows for implementation of other hypervisor specific provider
implementation in future.
The Host-HA provider implementation for KVM hypervisor uses the out-of-band
management sub-system to issue IPMI calls to reset (recover) or poweroff (fence)
a host.
The Host-HA provider implementation for Simulator provides a means of testing
and validating the core framework implementation.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new certificate authority framework that allows
pluggable CA provider implementations to handle certificate operations
around issuance, revocation and propagation. The framework injects
itself to `NioServer` to handle agent connections securely. The
framework adds assumptions in `NioClient` that a keystore if available
with known name `cloud.jks` will be used for SSL negotiations and
handshake.
This includes a default 'root' CA provider plugin which creates its own
self-signed root certificate authority on first run and uses it for
issuance and provisioning of certificate to CloudStack agents such as
the KVM, CPVM and SSVM agents and also for the management server for
peer clustering.
Additional changes and notes:
- Comma separate list of management server IPs can be set to the 'host'
global setting. Newly provisioned agents (KVM/CPVM/SSVM etc) will get
radomized comma separated list to which they will attempt connection
or reconnection in provided order. This removes need of a TCP LB on
port 8250 (default) of the management server(s).
- All fresh deployment will enforce two-way SSL authentication where
connecting agents will be required to present certificates issued
by the 'root' CA plugin.
- Existing environment on upgrade will continue to use one-way SSL
authentication and connecting agents will not be required to present
certificates.
- A script `keystore-setup` is responsible for initial keystore setup
and CSR generation on the agent/hosts.
- A script `keystore-cert-import` is responsible for import provided
certificate payload to the java keystore file.
- Agent security (keystore, certificates etc) are setup initially using
SSH, and later provisioning is handled via an existing agent connection
using command-answers. The supported clients and agents are limited to
CPVM, SSVM, and KVM agents, and clustered management server (peering).
- Certificate revocation does not revoke an existing agent-mgmt server
connection, however rejects a revoked certificate used during SSL
handshake.
- Older `cloudstackmanagement.keystore` is deprecated and will no longer
be used by mgmt server(s) for SSL negotiations and handshake. New
keystores will be named `cloud.jks`, any additional SSL certificates
should not be imported in it for use with tomcat etc. The `cloud.jks`
keystore is stricly used for agent-server communications.
- Management server keystore are validated and renewed on start up only,
the validity of them are same as the CA certificates.
New APIs:
- listCaProviders: lists all available CA provider plugins
- listCaCertificate: lists the CA certificate(s)
- issueCertificate: issues X509 client certificate with/without a CSR
- provisionCertificate: provisions certificate to a host
- revokeCertificate: revokes a client certificate using its serial
Global settings for the CA framework:
- ca.framework.provider.plugin: The configured CA provider plugin
- ca.framework.cert.keysize: The key size for certificate generation
- ca.framework.cert.signature.algorithm: The certificate signature algorithm
- ca.framework.cert.validity.period: Certificate validity in days
- ca.framework.cert.automatic.renewal: Certificate auto-renewal setting
- ca.framework.background.task.delay: CA background task delay/interval
- ca.framework.cert.expiry.alert.period: Days to check and alert expiring certificates
Global settings for the default 'root' CA provider:
- ca.plugin.root.private.key: (hidden/encrypted) CA private key
- ca.plugin.root.public.key: (hidden/encrypted) CA public key
- ca.plugin.root.ca.certificate: (hidden/encrypted) CA certificate
- ca.plugin.root.issuer.dn: The CA issue distinguished name
- ca.plugin.root.auth.strictness: Are clients required to present certificates
- ca.plugin.root.allow.expired.cert: Are clients with expired certificates allowed
UI changes:
- Button to download/save the CA certificates.
Misc changes:
- Upgrades bountycastle version and uses newer classes
- Refactors SAMLUtil to use new CertUtils
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Since libvirt 1.2.2 libvirt will properly create volumes
using RBD format 2.
We can use libvirt to creates the volumes which strips a bit of
code from the CloudStack Agent's responsbility.
RBD format 2 is already used by all volumes created by CloudStack.
This format is the most recent format of RBD and is still actively
being developed.
This removes the support for Ubuntu 12.04 as that does not have the
proper libvirt version available.
Signed-off-by: Wido den Hollander wido@widodh.nl
We can use libvirt to creates the volumes which strips a bit of
code from the CloudStack Agent's responsbility.
RBD format 2 is already used by all volumes created by CloudStack.
This format is the most recent format of RBD and is still actively
being developed.
This removes the support for Ubuntu 12.04 as that does not have the
proper libvirt version available.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Issue
=====
While listing datacenters associated with a zone, only zone Id validation is required.
There is no need to have additional checks like zone is a legacy zone or not.
Fix
===
Removed unnecessary checks over zone ID and just checking if zone with specified ID exists or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
(cherry picked from commit 0ef1c17541)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Summary: CLOUDSTACK-8921
snapshot_store_ref table should store actual size of back snapshot in secondary storage
Calling SR scan to make sure size is updated correctly
(cherry picked from commit 4e4b67cd96)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
with XenServer & Local SR (Db_exn.Uniqueness_constraint_violation)
removed the host uuid from SR label so that any host which has access to
the SR(all the hosts in the same pool) can reuse the same SR
(cherry picked from commit 1aa6a72bc7)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
as that snapshot will never be going to use again and also it will fill up primary storage
(cherry picked from commit 336df84f17)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Updated hardcoded value with max data volumes limit from hypervisor capabilities.
(cherry picked from commit 93f5b6e8a3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Libvirt / Qemu (KVM) does not collect statistics about these either.
On some systems it might even yield a 'internal error' from libvirt
when attempting to gather block statistics from such devices.
For example Ubuntu 16.04 (Xenial) has a issue with this.
Skip them when looping through all devices.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.9:
Do not set gateway to 0.0.0.0 for windows clients
CLOUDSTACK-9904: Fix log4j to have @AGENTLOG@ replaced
ignore bogus default gateway when a shared network is secondary the default gateway gets overwritten by a bogus one dnsmasq does the right thing and replaces it with its own default which is not good for us so check for '0.0.0.0'
Activate NioTest following changes in CLOUDSTACK-9348 PR #1549
CLOUDSTACK-9828: GetDomRVersionCommand fails to get the correct version as output Fix tries to return the output as a single command, instead of appending output from two commands
CLOUDSTACK-3223 Exception observed while creating CPVM in VMware Setup with DVS
CLOUDSTACK-9787: Fix wrong return value in NetUtils.isNetworkAWithinNetworkB
with XenServer & Local SR (Db_exn.Uniqueness_constraint_violation)
removed the host uuid from SR label so that any host which has access to
the SR(all the hosts in the same pool) can reuse the same SR
1. Removed XenServerGuestOsMemoryMap from CitrixHelper.java
This java file was holding a static in memory map named XenServerGuestOsMemoryMap. This was the source for xenserver dynamic memory values(max and min). These values were moved to guest_os_details table.
2. DAO layer was modified to access these values.
3. VirtualMachineTo object was modified to populate the dynamic memory values.
4. addGuestOs and UpdateGuestOS api has been modified to update memory values.
This fixes log4j xml to have @AGENTLOG@ replaced with values defined
in build/replace.properties.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Test scenarios:
- Enable cluster HA after VR is created. Now stop and start VR and check its restart priority, should be High.
- Enable cluster HA before VR is created. Now create some VM and verify that VR created must have High restart priority.
CLOUDSTACK-9720: [VMware] template_spool_ref table is not getting updated with correct template physical size in template_size column.Updated the template_spool_ref table with the correct template (VMware - OVA file) size.
* pr/1880:
CLOUDSTACK-9720: [VMware] template_spool_ref table is not getting updated with correct template physical size in template_size column.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Summary: CLOUDSTACK-8921
snapshot_store_ref table should store actual size of back snapshot in secondary storage
Calling SR scan to make sure size is updated correctly
Bug-ID: CLOUDSTACK-8880: calculate free memory on host before deploying Vm. free memory = total memory - (all vm memory)With memory over-provisioning set to 1, when mgmt server starts VMs in parallel on one host, then the memory allocated on that kvm can be larger than the actual physcial memory of the kvm host.
Fixed by checking free memory on host before starting Vm.
Added test case to check memory usage on Host.
Verified Vm deploy on Host with enough capacity and also without capacity
* pr/847:
Bug-ID: CLOUDSTACK-8880: calculate free memory on host before deploying Vm. free memory = total memory - (all vm memory)
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9794: Unable to attach more than 14 devices to a VMUpdated hardcoded value with max data volumes limit from hypervisor capabilities.
* pr/1953:
CLOUDSTACK-9794: Unable to attach more than 14 devices to a VM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9698 [VMware] Make hardcorded wait timeout for NIC adapter hotplug as configurableJira
===
CLOUDSTACK-9698 [VMware] Make hardcoded wait timeout for NIC adapter hotplug as configurable
Description
=========
Currently ACS waits for 15 seconds (hard coded) for hot-plugged NIC in VR running on VMware to get detected by guest OS.
The time taken to detect hot plugged NIC in guest OS depends on type of VMware NIC adapter like (E1000, VMXNET3, E1000e etc.)
and guest OS itself. In uncommon scenarios the NIC detection may take longer time than 15 seconds,
in such cases NIC hotplug would be treated as failure which results in VPC tier configuration failure.
Alternatively making the wait timeout for NIC adapter hotplug as configurable will be helpful for admins in such scenarios. This is specific to VR running over VMware hypervisor.
Also in future if VMware introduces new NIC adapter types which may take time to get detected by guest OS, it is good to have flexibility of
configuring the wait timeout as fallback mechanism in such scenarios.
Fix
===
Introduce new configuration parameter (via ConfigKey) "vmware.nic.hotplug.wait.timeout" which is "Wait timeout (milli seconds) for hot plugged NIC of VM to be detected by guest OS." as fallback instead of hard coded timeout, to ensure flexibility for admins given the listed scenarios above.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
* pr/1861:
CLOUDSTACK-9698 Make the wait timeout for NIC adapter hotplug as configurable
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
* 4.9:
moved logrotate from cron.daily to cron.hourly for vpcrouter in cloud-early-config
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
[4.9] CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agentThe router.aggregation.command.each.timeout in global configuration is only applied on new created KVM host.
For existing KVM host, changing the value will not be effective.
We need to propagate the configuration to existing host when cloudstack-agent is connected.
* pr/1856:
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This adds support for virtio-scsi on KVM hosts, either
for guests that are associated with a new os_type of 'Other PV Virtio-SCSI (64-bit)',
or when a VM or template is regstered with a detail parameter rootDiskController=scsi.
Update cloudstack add template dialog to allow for selecting rootDiskController with KVM
Update cloudstack kvm virtio-scsi to enable discard=unmap
Currently ACS waits for 15 seconds (hard coded) for hot-plugged NIC in VR to get detected by guest OS.
The time taken to detect hot plugged NIC in guest OS depends on type of NIC adapter like (E1000, VMXNET3, E1000e etc.)
and guest OS itself. In uncommon scenarios the NIC detection may take longer time than 15 seconds,
in such cases NIC hotplug would be treated as failure which results in VPC tier configuration failure.
Alternatively making the wait timeout for NIC adapter hotplug as configurable will be helpful for admins in such scenarios.
Also in future if VMware introduces new NIC adapter types which may take time to get detected by guest OS, it is good to have flexibility of
configuring the wait timeout as fallback mechanism in such scenarios.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
* 4.9:
CLOUDSTACK-9746 system-vm: logrotate config causes critical failures
CLOUDSTACK-9788: Fix exception listNetworks with pagesize=0
CLOUDSTACK-8663: Fixed various issues to allow VM snapshots and volume snapshots to exist together
Fix HVM VM restart bug in XenServer
CLOUDSTACK-9363: Fix HVM VM restart bug in XenServerHere is the longer description of the problem:
By default XenServer limits HVM guests to only 4 disks. Two of those are reserved for the ROOT disk (deviceId=0) and CD ROM (device ID=3) which means that we can only attach 2 data disks. This limit however is removed when Xentools is installed on the guest. The information that a guest has Xentools installed and can handle more than 4 disks is stored in the VM metadata on XenServer. When a VM is shut down, Cloudstack removes the VM and all the metadata associated with the VM from XenServer. Now, when you start the VM again, even if it has Xentools installed, it will default to only 4 attachable disks.
Now this problem manifests itself when you have a HVM VM and you stop and start it with more than 2 data disks attached. The VM fails to start and the only way to start the VM is to detach the extra disks and then reattach them after the VM start.
In this fix, I am removing the check which is done before creating a `VBD` which enforces this limit. This will not affect current workflow and will fix the HVM issue.
@koushik-das this is related to the "autodetect" feature that you introduced a while back (https://issues.apache.org/jira/browse/CLOUDSTACK-8826). I would love your review on this fix.
* pr/1829:
Fix HVM VM restart bug in XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
snapshots to exist together
Reverting VM to disk only snapshot in Xenserver corrupts VM
Stale NFS secondary storage on XS leads to volume creation failure from snapshot
[4.10] CLOUDSTACK-8746: VM Snapshotting implementation for KVM
* pr/977:
Fixes for testing VM Snapshots on KVM. Related to PR 977
CLOUDSTACK-8746: vm snapshot implementation for KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9359: IPv6 for Basic NetworkingThis PR is a proposal for adding very basic IPv6 to Basic Networking. The main goal of this PR is that the API returns a valid IPv6 address over which the Instance is reachable.
The GUI will show the IPv6 address after deployment of the Instance.
If the table VLAN has a proper IPv6 CIDR configured the DirectPodBasedNetworkGuru will calculate the IPv6 Address the Instance will obtain using EUI-64 and SLAAC: https://tools.ietf.org/search/rfc4862
In this case the _vlan_ table contained:
<pre>mysql> select * from vlan \G
*************************** 1. row ***************************
id: 1
uuid: 90e0716c-5261-4992-bb9d-0afd3006f476
vlan_id: vlan://untagged
vlan_gateway: 172.16.0.1
vlan_netmask: 255.255.255.0
description: 172.16.0.10-172.16.0.250
vlan_type: DirectAttached
data_center_id: 1
network_id: 204
physical_network_id: 200
ip6_gateway: 2001:980:7936:112::1
ip6_cidr: 2001:980:7936:112::/64
ip6_range: NULL
removed: NULL
created: 2016-07-19 20:39:41
1 row in set (0.00 sec)
mysql></pre>
It will then log:
<pre>2016-10-04 11:42:44,998 DEBUG [c.c.n.g.DirectPodBasedNetworkGuru] (Work-Job-Executor-1:ctx-1975ec54 job-186/job-187 ctx-0d967d88) (logid:275c4961) Found IPv6 CIDR 2001:980:7936:112::/64 for VLAN 1
2016-10-04 11:42:45,009 INFO [c.c.n.g.DirectPodBasedNetworkGuru] (Work-Job-Executor-1:ctx-1975ec54 job-186/job-187 ctx-0d967d88) (logid:275c4961) Calculated IPv6 address 2001:980:7936:112:4ba:80ff:fe00:e9 using EUI-64 for NIC 6a05deab-b5d9-4116-80da-c94b48333e5e</pre>
The template has to be configured accordingly:
- No IPv6 Privacy Extensions
- Use SLAAC
- Follow RFC4862
This is also described in: https://cwiki.apache.org/confluence/display/CLOUDSTACK/IPv6+in+Basic+Networking
The next steps after this will be:
- Security Grouping to prevent IPv6 Address Spoofing
- Security Grouping to filter ICMP, UDP and TCP traffic
* pr/1700:
CLOUDSTACK-676: IPv6 In -and Egress filtering for Basic Networking
CLOUDSTACK-676: IPv6 Basic Security Grouping for KVM
CLOUDSTACK-9359: IPv6 for Basic Networking with KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9619: Updates for SAN-assisted snapshotsThis PR is to address a few issues in #1600 (which was recently merged to master for 4.10).
In StorageSystemDataMotionStrategy.performCopyOfVdi we call getSnapshotDetails. In one such scenario, the source snapshot in question is coming from secondary storage (when we are creating a new volume on managed storage from a snapshot of ours thats on secondary storage).
This usually worked in the regression tests due to a bit of "luck": We retrieve the ID of the snapshot (which is on secondary storage) and then try to pull out its StorageVO object (which is for primary storage). If you happen to have a primary storage that matches the ID (which is the ID of a secondary storage), then getSnapshotDetails populates its Map<String, String> with inapplicable data (that is later ignored) and you dont easily see a problem. However, if you dont have a primary storage that matches that ID (which I didnt today because I had removed that primary storage), then a NullPointerException is thrown.
I have fixed that issue by skipping getSnapshotDetails if the source is coming from secondary storage.
While fixing that, I noticed a couple more problems:
1) We can invoke grantAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
2) We can invoke revokeAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
I have corrected those issues, as well.
I then came across one more problem:
When using a SAN snapshot and copying it to secondary storage or creating a new managed-storage volume from a snapshot of ours on secondary storage, we attach to the SR in the XenServer code, but detach from it in the StorageSystemDataMotionStrategy code (by sending a message to the XenServer code to perform an SR detach). Since we know to detach from the SR after the copy is done, we should detach from the SR in the XenServer code (without that code having to be explicitly called from outside of the XenServer logic).
I went ahead and changed that, as well.
JIRA Ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-9619
* pr/1749:
CLOUDSTACK-9619: Updates for SAN-assisted snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This commit implements basic Security Grouping for KVM in
Basic Networking.
It does not implement full Security Grouping yet, but it does:
- Prevent IP-Address source spoofing
- Allow DHCPv6 clients, but disallow DHCPv6 servers
- Disallow Instances to send out Router Advertisements
The Security Grouping allows ICMPv6 packets as described by RFC4890
as they are essential for IPv6 connectivity.
Following RFC4890 it allows:
- Router Solicitations
- Router Advertisements (incoming only)
- Neighbor Advertisements
- Neighbor Solicitations
- Packet Too Big
- Time Exceeded
- Destination Unreachable
- Parameter Problem
- Echo Request
ICMPv6 is a essential part of IPv6, without it connectivity will break or be very
unreliable.
For now it allows any UDP and TCP packet to be send in to the Instance which
effectively opens up the firewall completely.
Future commits will implement Security Grouping further which allows controlling UDP and TCP
ports for IPv6 like can be done with IPv4.
Regardless of the egress filtering (which can't be done yet) it will always allow outbound DNS
to port 53 over UDP or TCP.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
While remote executing commands/scripts through SSH in VR, ACS uses system vm keyfile.
ACS is fetching this key file using VMwareContext object which encapsulates vCenter connection handle.
This is inefficient because of dependency on getServiceContext() which means a vCenter connection
handle which is not required just to fetch a file in name space in management server.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
Issue
=====
While listing datacenters associated with a zone, only zone Id validation is required.
There is no need to have additional checks like zone is a legacy zone or not.
Fix
===
Removed unnecessary checks over zone ID and just checking if zone with specified ID exists or not.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
CLOUDSTACK-9456: Migrate master to Spring 4.xThis changes makes CloudStack use spring 4:
```
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK7
- Bump servet dependency version
- Migrates various xmls to use version independent schema uris
```
Outstanding issue:
- Testing of various non-standard plugins such as network and storage plugins etc.
Since, this is a big change pinging for review -- @jburwell @karuturi @wido @murali-reddy @abhinandanprateek @DaanHoogland @GaborApatiNagy @JayapalUradi @kishankavala @K0zka @nvazquez @rafaelweingartner @pyr and others
@blueorangutan package
* pr/1638:
CLOUDSTACK-9456: Update Spring version in maven poms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
XenServer 7 SupportThis PR adds support for XenServer 7. I have manually done the following tests
- Create a new cluster with XenServer7
- Add Primary storage: Should create an SR on XS7
- Add another XS7 host to the Pool
- Add host2 to Cloudstack
- Create VM1 from template
- Create VM2 from template
- Ping/SSH VM1 to VM2 and vice-versa
- Stop/Delete/Expunge VM2
- Create Data disk
- Attach it to VM1
- Create VM snaphsot of VM1
- Restore VM snapshot of VM1
- Delete VM snapshot of VM1
- Create Volume snapshot of Datadisk
- Create volume snapshot of Root disk
- Create new template from snapshot of root disk
- Create volume from snapshot of datadisk
- Detach datadisk volume
- Delete datadisk volume
- Aquire a public IP
- Create a static nat to VM1
- Live migrate VM1 while traffic on VM
- Delete VM1
* pr/1711:
[CLOUDSTACK-9662] Add support for XenServer 7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Issue
====
Exception occured while creating the CPVM in the VmWare Setup using standard vswitches.
StartCommand failed due to Exception: com.vmware.vim25.AlreadyExists
message: [] com.vmware.vim25.AlreadyExistsFaultMsg: The specified key, name, or identifier already exists
Fix
===
Ensure synchronization while attempting to create port group such that simultaneous attempts are not made with same port group name on same ESXi host.
Signed-off-by: Sateesh Chodapuneedi <sateesh.chodapuneedi@accelerite.com>
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
-when processing static nat rule, add a mangle table rule, to mark the traffic
from the guest vm when it has associated static nat rule so that traffic gets
routed using the route tabe of the device which has public ip associated
-fix the case where nic_device_id is empty when ip is getting disassociated
resulting in empty deviceid in ips.json
-add utility methods in CsRule, and CsRoute to add 'ip rule' and 'ip route' rules respectivley
-ensure traffic from all public interfaces are connection marked with device number, and restored
for the reverse traffic. use the connection marked number to do device specific routing table lookup
fill the device specific routing table with default route
-component tests for testing multiple public interfaces of VR
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary storeThe race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
* pr/1765:
Cloudstack 9586: When using local storage with Xenserver prepareTemplate does not work with multiple primary store The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously. Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPoolIn a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
@blueorangutan package
* pr/1729:
CLOUDSTACK-9564: Fix memory leaks in VmwareContextPool
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The race condition will happen whenever there are multiple primary storages and the CS tries to mount the secondary store to xenserver host simultaneously.
Due to synchronised block one mount will be successful and other thread will get the already mounted SR. Without the fix the two thread will try to mount it parallely and one will fail on Xenserver.
In a recent management server crash, it was found that the largest contributor
to memory leak was in VmwareContextPool where a registry is held (arraylist)
that grows indefinitely. The list itself is not used anywhere or consumed. There
exists a hashmap (pool) that returns a list of contexts for existing poolkey
(address/username) that is used instead.
This fixes the issue by removing the arraylist registry, and limiting the
length of the context list for a given poolkey.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns IDThere is difference in instance-id metadata across baremetal and other hypervisors.
On Baremetal
[root@ip-172-17-0-144 ~]# curl http://8.37.203.221/latest/meta-data/instance-id
6021
on Xen
[root@ip-172-17-2-103 ~]# curl http://172.17.0.252/latest/meta-data/instance-id
cbeb517a-e833-4a0c-b1e8-9ed70200fbbf
In both cases it should be vm's uuid.
* pr/1738:
CLOUDSTACK-9566 instance-id metadata for baremetal VM returns ID
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit adds a additional VirtIO channel with the name
'org.qemu.guest_agent.0' to all Instances.
With the Qemu Guest Agent the Hypervisor gains more control over the Instance if
these tools are present inside the Instance, for example:
* Power control
* Flushing filesystems
* Fetching Network information
In the future this should allow safer snapshots on KVM since we can instruct the
Instance to flush the filesystems prior to snapshotting the disk.
More information: http://wiki.qemu.org/Features/QAPI/GuestAgent
Keep in mind that on Ubuntu AppArmor still needs to be disabled since the default
AppArmor profile doesn't allow libvirt to write into /var/lib/libvirt/qemu
This commit does not add any communication methods through API-calls, it merely
adds the channel to the Instances and installs the Guest Agent in the SSVMs.
With the addition of the Qemu Guest Agent channel a second channel appears in /dev
on a SSVM as a VirtIO port.
The order in which the ports are defined in the XML matters for the naming inside
the SSVM VM and by not relying on /dev/vportXX but looking for a static name the
SSVM still boots properly if the order in the XML definition is changed.
A SSVM with both ports attached will have something like this:
root@v-215-VM:~# ls -l /dev/virtio-ports
total 0
lrwxrwxrwx 1 root root 11 May 13 21:41 org.qemu.guest_agent.0 -> ../vport0p2
lrwxrwxrwx 1 root root 11 May 13 21:41 v-215-VM.vport -> ../vport0p1
root@v-215-VM:~# ls -l /dev/vport*
crw------- 1 root root 251, 1 May 13 21:41 /dev/vport0p1
crw------- 1 root root 251, 2 May 13 21:41 /dev/vport0p2
root@v-215-VM:~#
In this case the SSVM port points to /dev/vport0p1, but if the order in the XML
is different it might point to /dev/vport0p2
By looking for a portname with a pre-defined pattern in /dev/virtio-ports we
do not rely on the order in the XML definition.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor## Introduction
[JIRA TICKET](https://issues.apache.org/jira/browse/CLOUDSTACK-9379)
It is desired to support nested virtualization at VM level for VMware hypervisor. Current behaviour supports enabling/desabling global nested virtualization by modifying global config `'vmware.nested.virtualization'`. It is wished to improve this feature, having control at VM level instead of a global control only.
A new global configuration is added, to enable/disable VM nested virtualization control: `'vmware.nested.virtualization.perVM'`. Default value=false
After a vm deployment or start command, vm params include `'nestedVirtualizationFlag'` key and its value is:
- true -> nested virtualization enabled
- false -> nested virtualization disabled
**We will determinate nested virtualization enabled/disabled by examining this 3 values:**
- **(1)** global configuration `'vmware.nested.virtualization'` value
- **(2)** global configuration `'vmware.nested.virtualization.perVM'` value
- **(3)** `'nestedVirtualizationFlag'` value in `user_vm_details` if present, `null` if not.
Using this 3 values, there are different use cases:
- **(1)** = TRUE, **(2)** = TRUE, **(3)** is null -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = TRUE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = TRUE, **(2)** = FALSE, **(3)** indifferent -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** is null -> _DISABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = TRUE -> _ENABLED_
- **(1)** = FALSE, **(2)** = TRUE, **(3)** = FALSE -> _DISABLED_
- **(1)** = FALSE, **(2)** = FALSE, **(3)** indifferent -> _DISABLED_
* pr/1542:
CLOUDSTACK-9379: Support nested virtualization at VM level on VMware Hypervisor
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NICIn VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. Howver current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.
Fix ensured, while waiting for 15 sec in the loop, read the latest content from /proc/sys/net/ipv4/conf
, so that right device list is processed.
Manual tested VPC scenarios of adding new tiers which uses findRouterEthDeviceIndex, to find the guest/public network ethernet index.
* pr/1681:
CLOUDSTACK-9491: incorrect parsing of device list to find ethernet index of plugged NIC
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
* pr/1745:
CLOUDSTACK-9503: Increased the VR script timeout. Most of the changes are about converting int/long time values to joda Duration.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9502: DS template copies dont get deleted in VMware ESXi with multiple clusters and zone wide storage (include CLOUDSTACK-9386 into 4.9 release branch)Include #1560 into 4.9 release branch
* pr/1676:
CLOUDSTACK-9502: DS template copies don’t get deleted in VMware ESXi with multiple clusters and zone wide storage
Signed-off-by: John Burwell <meaux@cockamamy.net>
* 4.9:
CLOUDSTACK-8830: Fix for vm snapshots in Vmware, could not create vm snapshot until 12 minutes after vm creation due to vCenter sent null name on snpashot recent task
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
In VmwareResource, findRouterEthDeviceIndex() method find ethernet interface index given
the mac address. This method is used, once a nic is plugged to determine ethernet interface.
"/proc/sys/net/ipv4/conf" from the VR and looped through the devices to find the right
ethernet interface. However current logic read it once, and loops through the device list.
Its observerd device may not show up '/proc/sys/net/ipv4/conf' immediatly once NIC is plugged
in the VM from vCenter.Fix ensured, while waiting for 15 sec in the loop, read the latest
content from /proc/sys/net/ipv4/conf, so that right device list is processed.
By adding a Random Number Generator device to Instances we can prevent
entropy starvation inside guest.
The default source is /dev/random on the host, but this can be configured
to another source when present, for example a hardware RNG.
When enabled it will add the following to the Instance's XML definition:
<rng model='virtio'>
<rate period='1000' bytes='2048' />
<backend model='random'>/dev/random</backend>
</rng>
If the Instance has the proper support, which most modern distributions have,
it will have a /dev/hwrng device which it can use for gathering entropy.
More information: https://libvirt.org/formatdomain.html#elementsRng
CLOUDSTACK-9422: Granular 'vmware.create.full.clone' as Primary Storage setting### Introduction
For VMware, It is possible to decide creating VMs as full clones on ESX HV, adjusting `vmware.create.full.clone` global setting. We would like to introduce this property as a primary storage detail, and use its value instead of global setting's value.
We propose introducing `fullCloneFlag` on `PrimaryDataStoreTO` sent on `CopyCommand`. This way we can reconfigure `VmwareStorageProcessor` and `VmwareStorageSubsystemCommandHandler` similar as it was done for `nfsVersion` but refactoring it to be more general.
* pr/1602:
CLOUDSTACK-9422: Granular VMware vms creation as full clones on HV
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On snapshot backup, this converts the rbd raw format on disk to qcow2 for compression.
* pr/1645:
CLOUDSTACK-9461
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9428: Fix for CLOUDSTACK-9211 - Improve performance of 3D GPU support in cloud-plugin-hypervisor-vmwareJIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9428
### Introduction
On #1310 passing vRAM size to support 3D GPU problem was addressed on VMware. It was found out that it could be improved to increase performance by reducing extra API calls, as we'll describe later
### Improvement
On WMware, `VmwareResource` manages execution of `StartCommand.` Before sending power on command to ESXi hypervisor, vm is configured by calling `reconfigVMTask` web method on vSphere's client `VimPortType` web service.
It was found out that we were using this method 2 times when passing vRAM size, as it implied creating a new vm config spec only editing video card specs and making an extra call to `reconfigVMTask.`
We propose reducing the extra web service call by adjusting vm's config spec. This way video card gets properly configured (when passing vRAM size) in the same configure call, increasing performance.
### Use case (passing vRAM size)
* Deploy a new VM, let its id be X
* Stop VM
* Execute SQL, where X is vm's id and Z is vRAM size (in kB):
````
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'mks.enable3d', 'true');
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'mks.use3dRenderer', 'automatic');
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'svga.autodetect', 'false');
INSERT INTO cloud.user_vm_details (vm_id, name, value) VALUES (X, 'svga.vramSize', Z);
````
* Start VM
* pr/1605:
CLOUDSTACK-9428: Add marvin test
CLOUDSTACK-9428: Fix for CLOUDSTACK-9211 - Improve performance
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[blocker] CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpmsThe patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
/cc @wido @sverrirab @karuturi @jburwell
@blueorangutan package
* pr/1634:
CLOUDSTACK-9452: add python-argparse dependency on el6,7 rpms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The patchviasocket script was rewritten in Python from PR #1533 and made
assumptions that Python 2.7 would be available. In case of CentOS, python 2.7
may not be available or installed. This change ensures that python-argparse
is installed which is used by this script.
Expose cmd error in the logs when patch command fails.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We noticed that when an exception occurs within the cleanup loop inside
the deletePhysicalDisk routine that the previously allocated contexts
are not cleaned up. This seemed to cause an eventual crash of the host
agent after multiple exceptions within the loop.
In addition to ensuring the contexts are always freed we also improved
the logging when exceptions do occur to include the actual return code
from the underlying library in deletePhysicalDisk and deleteSnapshot.
* 4.8:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
* 4.7:
CLOUDSTACK-9353: [XenServer] Fixed VM migration with storage
Added ASF license to unit test file
Added unit test to verify ordering
Fixed ordering of network ACL rules being sent to the VR. The comparator was inverted
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Convert patchviasocket to python (removes perl dependency for KVM agent)As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Note: perl-modules requirement is missing (fixed in mentioned PR) so do not merge that onto master.
* pr/1533:
Revert "Add perl-modules as install dependency for cloudstack-agent"
patchviasocket improve error handling
Convert patchviasocket to python (removes perl dependency for KVM agent)
Signed-off-by: Will Stevens <williamstevens@gmail.com>
As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CPU socket count reporting correctionCPU socket count reporting correction
From https://github.com/MissionCriticalCloud/cosmic-plugin-hypervisor-kvm/pull/16
* pr/1520:
Remove empty spaces causing the build to fail
CPU socket count reporting correction
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMThis PR introduces the changes proposed in PR #780 with some work to make the code null safe.
During this PR, I have also removed some unused code.
* pr/1444:
Removed unnecessary check when creating the “userVmResponse” object.
Fixed issues from CLOUDSTACK-8800 that were introduced in PR 780
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage- KVM-HA- Fix CheckOnHost for Local storage
- Also skip HA on VMs that are using local storage
* pr/1496:
CLOUDSTACK-9350: KVM-HA- Fix CheckOnHost for Local storage - Also skip HA on VMs that are using local storage
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8302: Removing snapshots on RBDSnapshot removing implemented if primary datastore is RBD
https://issues.apache.org/jira/browse/CLOUDSTACK-8302
* pr/1230:
CLOUDSTACK-8302 - Cleanup snapshot on KVM with RBD Snapshot removing implemented on RBD. 1. On management side: when created new shanpshot we checking if our primary storage is RBD, then do not remove record from cloud.snapshot_store_ref with link to Ceph image via 'install_path' field. 2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'. 3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
Signed-off-by: Will Stevens <williamstevens@gmail.com>
It was worked around some possible runtime exceptions introduced by the
changes that were added by the PR 780. Basically, the points in which a
null pointer exception could happen, we added safety checks to avoid
them. It was create a specific method do that, all together test cases
were created for this newly method that was added.
[4.7] vmware: improve support for disks- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
* pr/1365:
vmware: improve support for disks
Signed-off-by: Will Stevens <williamstevens@gmail.com>
4.9 mvn version safeupgradeonlyUpgrades maven dependencies versions that can be safely upgraded without breaking console-proxy/crypto usage.
Bisected changes from: https://github.com/apache/cloudstack/pull/1397
cc @swill @DaanHoogland
* pr/1510:
maven: fix dependency version support by JDK7
further maven dependency updates from Daan
framework/quota: fix checkstyle issue
maven: Upgrade dependency versions
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9142 Migrate VM changes xmlDesc in a safe wayThe problem arises when the origin hypervisor has an ip addres that ends with 1, like '10.10.10.1' and the qemu VM description is containing an address that has that as part of its address, '10.10.10.100' for instance.
now migrating to '10.10.10.10' will change both addresses in the xml description file for qemu. It is fixed and unit tests are added. I am not sure yet how to integration test this. Regression will probably work so creating a PR now.
* pr/1348:
CLOUDSTACK-9142 Migrate VM changes xmlDesc in a safe way
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Snapshot removing implemented on RBD.
1. On management side: when created new shanpshot we checking if our primary storage is RBD,
then do not remove record from cloud.snapshot_store_ref with link to Ceph
image via 'install_path' field.
2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'.
3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Removed unnecessary code from getGuestOsType in CitrixResourceBaseConsidering that all mapping of Guest OS Names to their respective hypervisor compatible types is made thorugh accessing a database, we've decided to remove a bit of code in the XcpOssResource class which was doing that same thing for 2 different OS's (both of which ARE in the database). That has led us to a bunch of unused parameters in the getGuestOsType method from its superclass, which we've also decided to remove. Test cases were added for four different possibilities for the platformEmulator String: one for a null String, one for a blank String, one for an empy String and one for a random case with a valid String.
* pr/1262:
Remove test cases duplicated code.
Removed unnecessary code from getGuestOsType in CitrixResourceBase
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Improve disk chain usage while attaching, migrating disks
- Gets root disk controller based diskDeviceBusName from volume's chain info
- Refactor and move VirtualMachineDiskInfo to cloud-utils
- Allows mixing of scsi controller types
- Fixes a NPE case with map passed as null, for example in case of detach volume
command
- Use a osdefault translator that allow use of recent os types added (enums of
which) are not available in the sdk
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
SecurityGroupRulesCmd code cleanupWrote a test and cleaned some duplicate code with the objective to evaluate the jenkins pull request process at builds.a.o
worthwhile to keep, IMHO.
* pr/1287:
SecurityGroupRulesCmd code cleanup review comments handled
deal with PMD warnings
code cleanup
security rules test
remove autogenerated pydev files
Signed-off-by: Koushik Das <koushik@apache.org>
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VMfor xenserver,kvm and for vmware.
* pr/780:
CLOUDSTACK-8800 : Improved the listVirtualMachines API call to include memory utilization information for a VM for xenserver,kvm and for vmware.
Signed-off-by: Kishan Kavala <kishan@apache.org>
CLOUDSTACK-9252: Support configurable NFS version for Secondary Storage mountsJIRA Ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9252
### Description of the problem
After starting secondary storage VM, secondary storage tries to be mounted but fails with error: <code>Protocol family not supported</code>
It was found out that adding <code>-o vers=X</code> to mount command it would work, where <code>X</code> is the desired NFS version to use.
If it is desired to mount a store with a specific NFS version, it has passed in <code>image_store_details</code> table for a store with id <code>Y</code> as a property:
| store_id| name| value |
|:-------------:|:-------------:|:-------------:|
|Y|nfs.version|X (e.g. 3)|
Where X stands for NFS version
* pr/1361:
CLOUDSTACK-9252: Last refactor, passing nfs version to ssvm
CLOUDSTACK-9252: Add missing licence header
CLOUDSTACK-9252: Little refactor
CLOUDSTACK-9252: Mock application context for unit test
CLOUDSTACK-9252: Add unit tests
CLOUDSTACK-9252: New refactor
CLOUDSTACK-9252: Remove static dependencies, refactor
CLOUDSTACK-9252: Remove duplicates getNfsVersion, refactor
CLOUDSTACK-9252: Support configurable nfs version
CLOUDSTACK-9252: Add nfs version to commands
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
CLOUDSTACK-9211: Support passing vRAM size to support 3D GPU on VmwareJIRA TICKET:
https://issues.apache.org/jira/browse/CLOUDSTACK-9211
CS support passing hypervisor options by creating entries in <code>vm_template_details</code> or <code>user_vm_details</code>
To enable software 3D GPU 4 options needs to be added:
| name| value |
|:-------------:|:-------------:|
|mks.enable3d|true|
|mks.use3dRenderer|automatic|
|svga.autodetect|false|
|svga.vramSize|(size in KB) e.g. 131072|
Currently all options except <code>svga.vramSize</code> works, VMs always get configured with default 64Mb videoRAM instead of the one provided on the option.
* pr/1310:
CLOUDSTACK-9211: Unit test for 3dgpu support
CLOUDSTACK-9211: Refactor vm vram size setter method
CLOUDSTACK-9211: Add javadoc and refactor method
CLOUDSTACK-9211: Support passing vRAM size to support 3D GPU on Vmware
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Fixed return type Void to void in DataMotionStrategy.The main changes are:
- Changing methods Void to void.
- Removal of the method Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback<CopyCommandResult> callback) that was
never used.
We noticed that methods form that class are using the return type Void
with capital V. This way that method has to return a null value at the
end.
Removed trim lines from XenServerStorageMotionStrategy.
The trim lines were removed from XenServerStorageMotionStrategy.
* pr/969:
Changed return of methods from DataMotionStrategy, Void to void
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
test: Fix Libvirt test so that it works on WindowsThis test failed on Windows, using the File.separator it should run fine on Windows.
* pr/1242:
test: Fix Libvirt test so that it works on Windows
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Fix execution counter to support separate counts per thread
Add test to check that each thread has it's own execution counter
CLOUDSTACK-9231: Root volume migration from one primary to another primary storage within the same cluster is failing
This situation arises when there are two management server accessing the same database.
When the migration request comes the command is forwarded from one management server to another because
the host is owned by the second management server. So, serialization of map from one to another fails.
This is fixed by converting the maps to lists.
CLOUDSTACK-9127 Missing PV-bootloader-args for "SUSE Linux Enterprise Server 10 SP2 and SP3"
ISSUE
--------
STOP-START of SUSE Linux VMs fail, as PV-bootloader-args are missing during the start command.
DESCRIPTION
----------------------
Repro steps
1. Upload Suse ISO
2. Create a VM with this ISO, and install it.
3. Detach ISO from the VM.
4. Reboot the VM, :>>>> This will work fine, as the pv-bootloader-args are not missing during reboot.
5.Stop the VM from CCP(VM will get destroyed in Xencenter)
6. Start the same VM from CCP , it will try to start but will fail.
Before Applying the fix
--------------------------------
Before applying the starting the VM failed with following exception
com.cloud.utils.exception.CloudRuntimeException: Unable to start VM(i-2-6-VM) on host(7cfd6388-b763-4c09-b3a3-9679db2904a3) due to Task failed! Task record: uuid: 21a6799f-9523-7c0e-bb86-1de750a38d74
nameLabel: Async.VM.start_on
nameDescription:
allowedOperations: []
currentOperations: {}
created: Wed Dec 09 07:00:29 UTC 2015
finished: Wed Dec 09 07:00:31 UTC 2015
status: failure
residentOn: com.xensource.xenapi.Host@513d238c
progress: 1.0
type: <none/>
result:
errorInfo: [BOOTLOADER_FAILED, OpaqueRef:0b10b6ac-837d-29af-da9d-6ef1e11a064a, Unable to find partition containing kernel
]
otherConfig: {}
subtaskOf: com.xensource.xenapi.Task@aaf13f6f
subtasks: []
After Applying the fix
--------------------------
After applying the fix I am able to start the vm.
* pr/1196:
CLOUDSTACK-9127 Missing PV-bootloader-args for "SUSE Linux Enterprise Server 10 SP2 and SP3"
Signed-off-by: Daan Hoogland <daan@onecht.net>
* 4.6:
[UI] bug fix: Delete added ACL lists is not available for Domain Admin and normal users
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
[4.6] CLOUDSTACK-4787 - vmware diskcontrollersSame as #1131 (see this for screenshots etc)
* pr/1132:
CLOUDSTACK-4787: Allow users to select disk controller for VM/template
CLOUDSTACK-4787 Allow selection of scsi controller type in vSphere
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9095 : Hypervisor changes to support UserData for Nuage VSP
* pr/1142:
CLOUDSTACK-9095 : Hypervisor changes to support UserData for Nuage VSP
Signed-off-by: Remi Bergsma <github@remi.nl>
Quota service while allowing for scalability will make sure that the cloud is
not exploited by attacks, careless use and program errors. To address this
problem, we propose to employ a quota-enforcement service that allows resource
usage within certain bounds as defined by policies and available quotas for
various entities. Quota service extends the functionality of usage server to
provide a measurement for the resources used by the accounts and domains using a
common unit referred to as cloud currency in this document. It can be configured
to ensure that your usage won’t exceed the budget allocated to accounts/domain
in cloud currency. It will let user know how much of the cloud resources he is
using. It will help the cloud admins, if they want, to ensure that a user does
not go beyond his allocated quota. Per usage cycle if a account is found to be
exceeding its quota then it is locked. Locking an account means that it will not
be able to initiat e a new resource allocation request, whether it is more
storage or an additional ip. Needless to say quota service as well as any action
on the account is configurable.
Changes from Github code review:
- Added marvin test for quota plugin API
- removed unused commented code
- debug messages in debug enabled check
- checks for nulls, fixed access to member variables and feature
- changes based on PR comments
- unit tests for UsageTypes
- unit tests for all Cmd classes
- unit tests for all service and manager impls
- try-catch-finally or try-with-resource in dao impls for failsafe db switching
- remove dead code
- add missing quota calculation case (regression fixed)
- replace tabs with spaces in pom.xmls
- quota: though default value for quota_calculated is 0, the usage server
makes it null while entering usage entries. Flipping the condition so
as to acocunt for that.
- quotatypes: fix NPE in quota type
- quota framework test fixes
- made statement period configurable
- changed default email templates to reflect the fact that exhausted quota may not result in a locked account
- added quotaUpdateCmd that refreshes quota balances and sends alerts and statements
- report quotaSummary command returns quota balance, quota usage and state for all account
- made UI framework changes to allow for text area input in edit views
- process usage entries that have greater than 0 usage
- orocess quota entries only if tariff is non zero
- if there are credit entries but no balance entry create a dummy balance entry
- remove any credit entries that are before the last balance entry
when displaying balance statement
- on a rerun the last balance is now getting added
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Quota+Service+-+FS
PR: https://github.com/apache/cloudstack/pull/768
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9025: Fixed can't create usable template from snapshot in Xenserver and Vmwarehttps://issues.apache.org/jira/browse/CLOUDSTACK-9025
Fix also reverts below commit as below solution making assumption about hypervisor which are not applicable in case of XenServer and VmWare
Revert "CLOUDSTACK-8964: Can't create template or volume from snapshot"
This reverts commit ccf5d75cfb.
Testing:
Able to deploy VM successfully from template created from linked clone snapshot on XenServer.
* pr/1176:
CLOUDSTACK-9025: Fixed can't create usable template from snapshot in Xenserver and Vmware
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9047 rename enumsmake enums adhere to best practice naming conventions
* pr/1049:
CLOUDSTACK-9046 rename enums to adhere to naming conventions
CLOUDSTACK-9046 renamed enums in kvm plugin
CLOUDSTACK-9047 use 'State's only with context there are more types called 'State' (or to be called so but now 'state') So remove imports and prepend their enclosing class/context to them.
Signed-off-by: Daan Hoogland <daan@onecht.net>
Removed the PlannerBase class because it is does not bring contribution to ACS' code.Removed the PlannerBase class because it is does not bring contribution to ACS' code.
We changed com.cloud.deploy.FirstFitPlanner, now it doesnt extends the PlannerBase and implements the com.cloud.deploy.DeploymentPlanner.
We also removed the method com.cloud.deploy.DeploymentPlanner.check(VirtualMachineProfile, DeploymentPlan, DeployDestination, ExcludeList) that was not used anywhere.
Additionally, we removed the _ from FirstFitPlanner's attributes name, in order to have them in a more standard way.
* pr/1108:
Removed PlannerBase empty class
Signed-off-by: Remi Bergsma <github@remi.nl>
Fix also reverts below commit as below solution making assumption about hypervisor which are not applicable
in case of XenServer and VmWare
Revert "CLOUDSTACK-8964: Can't create template or volume from snapshot"
This reverts commit ccf5d75cfb.
Add function to set vapic, spinlock and retries
Add function to get retry value
Modify toString to output appropriate XML for spinlock value if set
CLOUDSTACK-9004: Add features to HyperVEnlightenmentFeatureDef
Refactored set methods to get rid of code duplication.
Modified unit tests accordingly
Create test cases to getPatchFilePath method and class names changed In this commit we created tests cases for the respective classes in package com.cloud.hypervisor.xenserver.resource.
We added test cases to check the implementation of com.cloud.hypervisor.xenserver.resource.CitrixResourceBase.getPatchFiles. Therefore, we test in a more comprehensive way the tests that already exist to check the code of com.cloud.hypervisor.xenserver.resource.CitrixResourceBase.getPatchFilePath.
We added a new abstract class, called com.cloud.hypervisor.xenserver.resource.CitrixResourceBaseTest.java
This class has two tests methods:
* com.cloud.hypervisor.xenserver.resource.CitrixResourceBaseTest.testGetPathFilesExeption(CitrixResourceBase), this method tests if the getPatchFilePath() method throws the com.cloud.utils.exception.CloudRuntimeException.CloudRuntimeException when the com.cloud.utils.script.Script.findScript(String, String) return a null value;
* com.cloud.hypervisor.xenserver.resource.CitrixResourceBaseTest.testGetPathFilesListReturned(CitrixResourceBase), this method tests the correct return value from getPatchFilePath() method, basically, verify if the returned list contain the file with the same absolute path that was retrieved from the findScript method.
We also changed the name of those test classes, the change was basically remove the Path word from the name of classes.
* pr/944:
created tests cases for method "citrixResourceBase.getPatchFiles"
Signed-off-by: Remi Bergsma <github@remi.nl>
The PlannerBase is an empty class, and does not bring contribution to
ACS code.
We changed com.cloud.deploy.FirstFitPlanner to extend the AdapterBase
and implements the com.cloud.deploy.DeploymentPlanner.
We also removed the method
com.cloud.deploy.DeploymentPlanner.check(VirtualMachineProfile,
DeploymentPlan, DeployDestination, ExcludeList) that was not used
anywhere.
Additionally, we removed the “_” from FirstFitPlanner's attributes name,
in order to have them in a more standard way.
* 4.6:
Use version for RC branch name instead of branch
make sure all files are updates with new version
Update L10N resource files with 4.6 strings from Transifex (20151129)
Fix secondary storage not working with swift
CLOUDSTACK-9083: Add disk serial to kvm virt xml
CLOUDSTACK-9081 Migration of vm across clusters fails in clustered MS setupStorage motion of vm across clusters/xenserver-pools fails in a
clustered management server setup. In xen storage motion we have to send
a migrate_receive command to the destination host, followed by
migrate_send command to the source host. The sr and network detials of
the destination host have to be passed in migrate_send command on the
source. While migrating across clusters the source and destination
resources are seperate objects. To pass this information across
resources we have to send seperate migrate with storage receive and send
commands to the resource. In a clustered ms setup these commands may
have to be forwarded to another ms as the resource may be owned by it.
The serilization of the command and answer objects fails in such case as
it doesn't understand the xapi sr and network objects. Made a change to
serialize these objects in the resource layer and pass the around as
strings in the command and answer objects.
Reviewed-By: @likitha
Author: @devdeep
Tested-By: @sailajamada
* pr/1118:
CLOUDSTACK-9081 Migration of vm across clusters fails in clustered MS setup
Signed-off-by: Remi Bergsma <github@remi.nl>
we also changed the name of those test classes, the change was basically
remove the “Path” word from the name of classes.
change the private method
com.cloud.hypervisor.xenserver.resource.CitrixResourceBase.getPatchFiles
to protected
added new class in test cases
The main changes are:
• Changing methods “Void” to “void”.
• Removal of the method “Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback callback)” that was never used. We
noticed that methods form that class are using the return type Void with
capital V. This way that method has to return a null value at the end.
commit #7
So far only 1 controller (scsi or ide) is supported in Cloudstack for ide or
scsi, this is existing limitation. Added support for 2nd IDE controller. Support adding IDE
virtual disk to VM. Also added check if VM is running as IDE virtual disk cannot be attached
to VM if VM is runnning.If user detaches a virtual disk on lower unit number of controller,
then subsequent attach operation should find free unit number on the controller and attach
the virtual disk there.
commit #6
Let the controllers of existing VMs continue without flip, current busInfo retrieved from
chain_info field of volume record from database would be preferred over
controller settings from all configuration settings.
commit #5
Editing global configuration param vmware.root.disk.controller osdefault value results
in loss of previous root disk controller type. Hence root disk's controller type for legacy
VMs is unknow post that modificaiton by user. If VM is stop/start then we could get this
infromation from bus info of existing volume. But if user resets VM and then try to start VM.
The existing bus info would be lost. Hence existing disk info is not available to depend on.
Using lsilogic or generic scsi controller for ROOT disk of legacy VMs if reset.
commit #4
Avoid adding additional (>1) scsi controllers to system vms. While attaching volume to legacy VM
don't use osdefault optoin which applicable only for VM created with the option enabled, use
legacy data disk controller type (lsilogic)
commit #3
If root disk's controller type is scsi and data disk controller type condenses
to any of scsi sub-types then data disk controller type would fall back to root disk controller itself. This
ensures data volumes would be accessible in all cases as controller of root volume would be reliable
and it means VM has the supported controller. It also avoids mix of scsi controller sub-types in a user instance.
Also translating disk controller type scsi to lsilogic.
commit #2
Support auto detection of recommended virtual disk controller type for specific guest OS.
commit #1
Support granual controller types. Add support for controller types in template registration as well.
Fix white spaces.
Removed stale HEAD merge lines
Removed tail of merge lines
Fixed VmwareResource, removing storage commands that moved to VmwareStorageProcessor.
removed stale code of controller that is present in processor
Fixed check style errors.
Fixed injection.
Tested with Linux and windows templates. Unable to run iso based tests due to few bugs in register iso area.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
(cherry picked from commit a4cc987a6f)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Storage motion of vm across clusters/xenserver-pools fails in a
clustered management server setup. In xen storage motion we have to send
a migrate_receive command to the destination host, followed by
migrate_send command to the source host. The sr and network detials of
the destination host have to be passed in migrate_send command on the
source. While migrating across clusters the source and destination
resources are seperate objects. To pass this information across
resources we have to send seperate migrate with storage receive and send
commands to the resource. In a clustered ms setup these commands may
have to be forwarded to another ms as the resource may be owned by it.
The serilization of the command and answer objects fails in such case as
it doesn't understand the xapi sr and network objects. Made a change to
serialize these objects in the resource layer and pass the around as
strings in the command and answer objects. Reviewed-By: Likitha
Adds disk serial ids based on volume uuids to the virt xml. This may be useful
for appliances/software that needs some serial ids on the VM disks. This does not
impact existing/running VMs, the vm virt xmls will be updates for running VMs
the next time they are stopped/started.
For testing, disk serial (of debian based systemvm) in the virt xml matched that
in /sys/devices/pci0000:00:0000:00:07.0/virtio4/block/vda/serial.
We currently don't support scsi-blcok devices for which serial is not supported,
for this we've added a DeviceType (LUN) which may be used in future and a check
to not add the serial to the xml if disk type is LUN.
Refer: https://libvirt.org/formatdomain.html#elementsDisks
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9062: Improve S3 implementation.The S3 implementation is far from finished, this commit focuses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimizations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Please review thoroughly, both code inspection and (automated) integration tests. Currently no integration tests are available specifically for S3. Therefore the implementation is needed to be tested manually, for now...
What I tested:
- Greenfield install -> will download latest systemvm template automatically to S3.
- Upload a template/iso
- Download a template/iso
- Restart of management server -> list available templates -> doesn't download them again if available.
* pr/1083:
CLOUDSTACK-9062: Improve S3 implementation.
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-9067 - As I developer I want to remove all the unused router-shell scripts from ACSThis PR removes the unused shell scripts that were present in the ACS project. Those script were replaced by the.
Some of the scripts are used by the HyperV Resource, which were hardcoded. I took the opportunity to use the Java constants over there as well, so the next one touching the code will know they exist and won't hardcode anything.
The following task were applied:
* Remove the shell files and the Java constants that were mapping them;
* Apply the use of the Java constants to the HyperV Resource class;
* Wrap the String.format() method in the StringUtils so we can test the changes in the HyperV Resource class.
The last point was added because I do not have a HyperV test environment. Hence, I wanted to make sure the tiny code I changed is covered at least by unit tests.
* pr/1084:
CLOUDSTACK-9067 - Replaces hardcoded paths with the VRScripts constants.
CLOUDSTACK-9067 - Fomatting the code of HypervDirectConnectResource class
CLOUDSTACK-9067 - Remove old script file from the project
Signed-off-by: Remi Bergsma <github@remi.nl>
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Add Unit Tests for Libvirt/KVM storage codeThese classes were not covered by Unit Tests and this commit
adds some tests for their basic functionality.
* pr/986:
Add Unit Tests for Libvirt/KVM storage code
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8964: Ovm3HypervisorGuru answer fix and snapshot to volume implementation.some clean up of code after the fix from #975
* pr/1015:
CLOUDSTACK-8964 side effect isolation extract side effect away to emphasize the main commandDelegation objective
host delegation logging for XenServerGuru.java
Getting volume from snapshot working again... odd
simple change to prevent failure and keep OVM3 snapshots working
This closes#975
Signed-off-by: Remi Bergsma <github@remi.nl>
These were lacking, but this helper is used in various places
inside the KVM code.
Some simple tests to verify the helper is doing what we expect it
to do.
CLOUDSTACK-8826: XenServer - Use device id passed as part of attach volume API properly
If device id passed as part of API and available then use it otherwise fallback on XS to automatically assign one.
For ISO device id used is 3 and it is processed before any other entry to avoid conflict.
Signed-off-by: Koushik Das <koushik@apache.org>
If device id passed as part of API and available then use it otherwise fallback on XS to automatically assign one.
For ISO device id used is 3 and it is processed before any other entry to avoid conflict.
Replaced all occurences of Charset.forName(UTF-8) with StringUtils.getPreferredCharset().
* pr/825:
Replaced all occurences of Charset.forName(UTF-8) with StringUtils.getPreferredCharset().
Signed-off-by: Daan Hoogland <daan@onecht.net>
sysctl: don't modify /etc/sysctl.confTo configure firewall rules, CloudStack modifies `/etc/sysctl.conf` and
execute those modifications. This may be harmful for several reasons:
1. `/etc/sysctl.conf` may be managed by some configuration management
system. Such a system will constantly restore the previous version.
2. `/etc/sysctl.conf` may contain additional properties that have been
changed later by some system administrator (for example, once a
firewall has been configured, forwarding may have been activated
while it is disabled in `/etc/sysctl.conf`). Executing the file
again at a later time may disrupt the system.
3. Entries are added again and again. `/etc/sysctl.conf` will contain
the same directives repeated several times.
Using a configuration file is not needed as `sysctl` is able to directly
modify sysctl values with `-w` flag.
Signed-off-by: Vincent Bernat <Vincent.Bernat@exoscale.ch>
* pr/776:
sysctl: don't modify /etc/sysctl.conf
Signed-off-by: Wido den Hollander <wido@widodh.nl>
To configure firewall rules, CloudStack modifies `/etc/sysctl.conf` and
execute those modifications. This may be harmful for several reasons:
1. `/etc/sysctl.conf` may be managed by some configuration management
system. Such a system will constantly restore the previous version.
2. `/etc/sysctl.conf` may contain additional properties that have been
changed later by some system administrator (for example, once a
firewall has been configured, forwarding may have been activated
while it is disabled in `/etc/sysctl.conf`). Executing the file
again at a later time may disrupt the system.
3. Entries are added again and again. `/etc/sysctl.conf` will contain
the same directives repeated several times.
Using a configuration file is not needed as `sysctl` is able to directly
modify sysctl values with `-w` flag.
Signed-off-by: Vincent Bernat <Vincent.Bernat@exoscale.ch>
Use host.reserved.ram.mb agent property to modify total system RAM
before reporting to management server.
Remove dom0ram variable and its min/max calculation. Just reserve a
default of 1GB, unless overridden by host.reserved.mem.mb property.
CLOUDSTACK-8762: Check to confirm disk activity before starting a VMImplements a VM volume/disk file activity checker that checks if QCOW2 file
has been changed before starting the VM. This is useful as a pessimistic
approach to save VMs that were running on faulty hosts that CloudStack could
try to launch on other hosts while the host was not cleanly fenced. This is
optional and available only if you enable the settings in agent.properties
file, on per-host basis.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* pr/753:
CLOUDSTACK-8762: Check to confirm disk activity before starting a VM
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Guys, can you review it? things need to be discussed:
(1) this supports KVM/QCOW2 only. Anyone want to implement for other Hypervisor/format ?
(2) The original data volume (on primary storage) will be removed.
(3) The script uses the default timeout in libvirtComputingResource. Do we need to add one in global configuration (like copy.volume.wait or backup.snapshot.wait, create.volume.from.snapshot.wait)
(4) In scripts/storage/qcow2/managesnapshot.sh, I use "qemu-img convert -f qcow2 -O qcow2" to copy the snapshot from secondary to primary (hence there is no base image file), instead of "cp -f", this is because convert is faster than cp in my testing.
* pr/732:
CLOUDSTACK-5863: revert volume snapshot for KVM/QCOW2
Signed-off-by: Wei Zhou <w.zhou@tech.leaseweb.com>
Made following fixes in simulator
- Support for ScaleVmCommand/NetworkRulesVmSecondaryIpCommand in resource layer
- Added support for scaling up a running VM in simulator
- Fixed some method names not following convention
In order to test PR #725 using simulator some of these changes are needed.
Based on the way HV check is present in the scale VM API, had to explicitly put simulator related check to allow support. The ideal way would be to remove all these HV specific check from code and made them some configuration (by putting them in hypervisor_capabilities table in DB). But that will be a bigger effort outside the scope of this PR.
Signed-off-by: Koushik Das <koushik@apache.org>
This reverts commit cd7218e241, reversing
changes made to f5a7395cc2.
Reason for Revert:
noredist build failed with the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.2:compile (default-compile) on project cloud-plugin-hypervisor-vmware: Compilation failure
[ERROR] /home/jenkins/acs/workspace/build-master-noredist/plugins/hypervisors/vmware/src/com/cloud/hypervisor/guru/VMwareGuru.java:[484,12] error: non-static variable logger cannot be referenced from a static context
[ERROR] -> [Help 1]
even the normal build is broken as reported by @koushik-das on dev list
http://markmail.org/message/nngimssuzkj5gpbz
Implements a VM volume/disk file activity checker that checks if QCOW2 file
has been changed before starting the VM. This is useful as a pessimistic
approach to save VMs that were running on faulty hosts that CloudStack could
try to launch on other hosts while the host was not cleanly fenced. This is
optional and available only if you enable the settings in agent.properties
file, on per-host basis.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
messages: Removed unused agent command AttachVolumeCommand and corresponding answer AttachVolumeAnswer
These types are not used anywhere in the orchestration layer.
Signed-off-by: Koushik Das <koushik@apache.org>
Default to notify only script to handle non-CLVM/QCOW cases.This relates to [CLOUDSTACK-8732](https://issues.apache.org/jira/browse/CLOUDSTACK-8732)
Before this commit the call to `getResizeScriptType` would throw an exception (earlier versions returned `null`, which was fine) - this caused the RBD case to fail. By changing the default to notify only we fix the case for any non-CLVM and non-QCOW cases, too.
This is RBD for now, but this should extend to new storage types supported by Libvirt natively in future.
This is my first attempted contribution: I can see a case for adding RBD logic to the actual getResizeScriptType call, too, but I felt that putting it `LibvirtResizeVolumeCommandWrapper.java` kept the special-casing of RBD (and comments about that) in one place.
### Caveat:
With Libvirt 1.2.2 this actually doesn't do the right thing - but it does do what the documentation *says* should be the right thing, so I'm going to test if this is a Libvirt bug which is fixed in a later version.
(To make it work I need to execute something like:
virsh blockresize --path vda --size 100G i-7-44-VM
where vda is the path as far as the *guest* is concerned, and not an `rbd/` path - which *should* work, but doesn't.)
* pr/696:
Default to notify only script to handle non-CLVM/QCOW cases.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Support for ScaleVmCommand/NetworkRulesVmSecondaryIpCommand in resource layer
- Added support for scaling up a running VM in simulator
- Fixed some method names not following convention
CLOUDSTACK-8443: Support CentOS 7 as KVM hypervisorThis adds support for CentOS 7 as a KVM hypervisor. As discussed in the Jira issue, the root cause of the issue was the `cloudstack-setup-agent` script that added this line to `/etc/libvirt/qemu.conf`:
`cgroup_controllers=["cpu"]`
On CentOS 6 this 'works', but since by default no cgroups are mounted, this setting is ignored by `libvirtd`. On CentOS 7 is does not work, because the `cpu` and `cpuacct` are 'co-mounted'. This simpy means you cannot use one without the order. The config line above instructs `libvirtd` to only use the `cpu` cgroup, which it can't.
There was code added to make sure the `cpu` cgroup was not co-mounted. It did this with a shell script, but after a reboot it was gone. It wasn't reliable and not even a solution at all. I went ahead and removed the code, because the co-mounted cgroups work fine. The real issue was the config line we put in `/etc/libvirt/qemu.conf` so much better to fix that instead.
The default for `libvirtd` is to use only cgroups that are mounted. When you remove the 'cgroup_controllers' line, the default kicks in. According to the `qemu.conf` file, the default is:
`cgroup_controllers = ["cpu", "devices", "memory", "blkio", "cpuacct", "net_cls"]`
Then again, if it's not mounted, it's not used. So, that's a nice way to control it.
This works just fine for both RHEL/CentOS 6 and RHEL/CentOS 7.
Along the debugging, I came across some small issues here and there which I also fixed in this PR.
If you test this, be sure to build RPMs from this branch and install those on the KVM hypervisor.
At Schuberg Philis we run KVM hypervisors on CentOS 7 for months with these fixes. Now I took the time to fix the issues in CloudStack, rather than work around them.
@bhaisaab @karuturi could you please review this? Thanks!
Please note:
The next step is to fix CLOUDSTACK-8625 (Systemd profile for KVM Agent) as currently a sysvinit script is still used. Although it works, we do not have any systemd benefits. As it is a separate issue, I'll try to address it in a separate PR.
* pr/731:
CLOUDSTACK-8443: detect CentOS 7.x as RHEL 7 alike
CLOUDSTACK-8443: mention the correct logfile
CLOUDSTACK-8443: display the right hypervisor type
CLOUDSTACK-8443: don't try to fix co-mounted cgroups
Signed-off-by: Remi Bergsma <github@remi.nl>
This setting works on CentOS 6 / RHEL 6 but does nothing, as
"cpu" cgroup is not mounted. On CentOS 7 / RHEL 7 systemd does
mount cgroups and "cpu" is co-mounted with "cpuacc". Hence, if
we specify "cpu" then this results in an error because it can
only use them both, or none.
By removing the setting, we rely on the default of qemu, which
is:
cgroup_controllers = ["cpu", "devices", "memory", "blkio", "cpuacct", "net_cls"]
Only if they are really mounted, they will be used. So, this will
work on both version 6 and 7.
The 'fix script' didn't work well, as after a reboot you'd still have qemu
throwing errors. Now we can handle the co-mountedcgroups.
Removed duplicate code in CitrixResourceBase and its subclassesRemoved unnecessary duplicated code by having the body of the getPatchFiles method only in the CitrixResourceBase superclass. Given that all of its implementations consisted of the same code except for the path which contains the necessary file for that implementation. An abstract method getPatchFilePath was created in the CitrixResourceBase superclass so that each implementation may return the path containing the specific file needed by that implementation.
Test cases were created for each implementation, simple as they may be. One assert is made to verify that the path returned by each implementation corresponds to the path that was previously specified on each getPatchFiles implementation.
* pr/700:
Removed duplicate code in CitrixResourceBase.getPatchFiles
Signed-off-by: Remi Bergsma <github@remi.nl>
This tries to avoid cleaning by a device name.
This closes#718
(cherry picked from commit 74f697a2dd)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Changed methodnames according to Nic.java refactor.
Fixed NicVO.java due to regression from Nic.java refactor.
Fixed VmWareGuru.java after Nic.java refactor.
See issue CLOUDSTACK-8736 for ongoing effort to clean up network code.
@cristofolini comments:
Removed unnecessary duplicated code by having the body of the
getPatchFiles method only in the
CitrixResourceBase superclass. Given that all of its implementations
consisted of the same code
except for the path which contains the necessary file for that
implementation. An abstract method
getPatchFilePath was created in the CitrixResourceBase superclass so
that each implementation may
return the path containing the specific file needed by that
implementation.
Test cases were created for each implementation, simple as they may be.
One assert is made to verify
that the path returned by each implementation corresponds to the path
that was previously specified
on each getPatchFiles implementation.
removed trailing whitespace
Cloudstack 8656: do away with more silently ignoring exceptions.a lot of messages added.
some restructuring for test exception assertions and try-with-resource blocks
* pr/654: (29 commits)
CLOUDSTACK-8656: more logging instead of sysout
CLOUDSTACK-8656: use catch block for validation
CLOUDSTACK-8656: class in json specified not found
CLOUDSTACK-8656: removed unused classes
CLOUDSTACK-8656: restructure of tests
CLOUDSTACK-8656: reorganise sychronized block
CLOUDSTACK-8656: restructure tests to ensure exception throwing
CLOUDSTACK-8656: validate the throwing of ServerApiException
CLOUDSTACK-8656: logging ignored exceptions
CLOUDSTACK-8656: try-w-r removes need for empty catch block
CLOUDSTACK-8656: try-w-r instead of clunckey close-except
CLOUDSTACK-8656: deal with empty SQLException catch block by try-w-r
CLOUDSTACK-8656: unnecessary close construct removed
CLOUDSTACK-8656: message about timed buffer logging
CLOUDSTACK-8656: message about invalid number from store
CLOUDSTACK-8656: move cli test tool to separate file
CLOUDSTACK-8656: exception is the rule for some tests
CLOUDSTACK-8656: network related exception logging
CLOUDSTACK-8656: reporting ignored exceptions in server
CLOUDSTACK-8656: log in case we are on a platform not supporting UTF8
...
Signed-off-by: Remi Bergsma <github@remi.nl>
Before this commit the call to `getResizeScriptType` would throw
an exception (earlier versions returned `null`, which was fine) -
this caused the RBD case to fail. By changing the default to
notify only we fix the case for any non-CLVM and non-QCOW cases.
This is RBD for now, but this should extend to new storage
types suppored by Libvirt natively in future.
When dumping XML use appropriate flags:
1, VIR_DOMAIN_XML_SECURE (dump security sensitive information too)
8, VIR_DOMAIN_XML_MIGRATABLE (dump XML suitable for migration)
Source:
https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainXMLFlags
This fixes CVE 2015-3252: VNC password lost during VM migration across KVM
hosts. The issue is also seen when a VM is rebooted.
(cherry picked from commit cb2aca7516)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* pr/547:
CLOUDSTACK-8601. VMFS storage added as local storage can be re-added as shared storage. Fail addition of a VMFS shared storage pool in case it has already been added as local storage in CS.
Signed-off-by: Mike Tutkowski <mike.tutkowski@solidfire.com>
On NFS we write a heartbeat, but without those we can not safely
fence off a host.
If we fence without knowing about a heartbeat we can cause a split-brain situation.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
- Make sure the new password replaces the old one in the queue
- Updated the patch files for XenServer
- Updated the script path on LibvirtComputing class
- Adding update_host_passwd to VRScripts
- Add implementation to CitrixUpdateHostPasswordCommandWrapper
- Improve testUpdateHostPasswordCommand() unit test on CitrixRequestWrapperTest
- Adding update_host_passwd.sh script
- Adding the host IP address as an instance variable on UpdateHostPasswordCommand
- Improving the Unit Test (LibvirtComputingResourceTest) to get it covering the new code
- Make sure doUpdateHostPassword() doesn't get called if flag is set to false
- Do not update XenServer hosts if the cluster ID is not informed
This closes#559
- Adding more unit tests as suggested by Daan and Rajani.
- Mocking SshHelper and the Script classes, used by Citrix and Libvirt resources respectively.
- Changed location of the update_host_passwd script
- Updated the patch files for XenServer
- Updated the script path on LibvirtComputing class
- Removed the hostIP from the LibvirtUpdateHostPasswordCommandWrapper execute() method
- Adding update_host_passwd to VRScripts
- Add accessor method to host password on CitrixResourceBase
- Add implementation to CitrixUpdateHostPasswordCommandWrapper
- Improve testUpdateHostPasswordCommand() unit test on CitrixRequestWrapperTest
- Add line to patch files on xenserver directory
Concerning the LibVirt change:
- I forgot to assing the return of the getDefaultHypervisorScriptsDir() method to the hypervisorScriptsDir variable
- Modifying the LibvirtUpdateHostPasswordCommandWrapper in order to execute the script on the host
- Adding the script path to LibvirtComputingResource
- Adding the host IP address as an instance variable on UpdateHostPasswordCommand
- Improving the Unit Test (LibvirtComputingResourceTest) to get it covering the new code
- Make sure the doUpdateHostPassword() method returns the result from the answer, not always true
- Added the LibvirtUpdateHostPasswordCommandWrapper class, which will handle the changes in the KVM agent
That's will be further implemented in the future. The command will avoid the agent to complain about Unsupported command
- Added a test to make sure the current implementation of the comment works
- If changes in the future, it will also require changes. In that way, we make sure nobody will break it
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#527
CLOUDSTACK-3317 - DVS does not support management\storage network
Added support for Management and Storage Network traffic over VMware DVS in CloudStack deployments. Also added support for storage VLAN over dvPortGroup.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
CLOUDSTACK-3317 - DVS does not support management\storage network
Use non-zero dvport count while updating dvportgroups of system traffic.
Updated configuration compare logic to avoid update dvportgroup operation unless required.
This would help improve speed in vm/network deployment as the update calls would reduce. Also improved logging.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Adding unit tests in class HypervisorHostHelperTest
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Added license header to new file being added to repo/branch.
Signed-off-by: Sateesh Chodapuneedi <sateesh@apache.org>
Assertion is not used in runtime, correct way is throw and handle exception without killing app
Signed-off-by: Daan Hoogland <daan.hoogland@gmail.com>
This closes#362
VmwareResource.java:315, MS_SHOULD_BE_FINAL, Priority: High
com.cloud.hypervisor.vmware.resource.VmwareResource.s_serviceContext isn't final but should be
VmwareResource.java:331, MS_SHOULD_BE_FINAL, Priority: High
com.cloud.hypervisor.vmware.resource.VmwareResource.s_powerStatesTable isn't final but should be
Signed-off-by: Daan Hoogland <daan.hoogland@gmail.com>
This closes#363
KVM hosts which are actuall up, but if their agents are shutdown should be put
in disconnected state. This would avoid getting the VMs HA'd and other commands
such as deploying a VM will exclude that host and save us from errors.
The improvement is that, we first try to contact the KVM host itself. If it fails
we assume that it's disconnected, and then ask its KVM neighbours if they can
check its status. If all of the KVM neighbours tell us that it's Down and we're
unable to reach the KVM host, then the host is possibly down. In case any of the
KVM neighbours tell us that it's Up but we're unable to reach the KVM host then
we can be sure that the agent is offline but the host is running.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#340
When executing the tests in an environment where Libvirt is also installed, it
caused errors.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#342
Maven was bulding the project and executing the tests just fine because it uses "-sourcepath". However,
with IDEs and javac it would fail.
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
This closes#317
Pull average Cpu util report between polling intervals instead of since boot
instead of using values since uptime
(cherry picked from commit 04176eaf17)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/LibvirtComputingResource.java
This closes#297
Passing the file argument to the xml break for EL 7.1, the fix removes
the argument as just passing rombar='off' with its file arg to be empty string.
This closes#290
(cherry picked from commit aafa0c80b3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
EL7 has a different output to 'free', use /proc/meminfo instead of a tool to be
more consistent across distros
(cherry picked from commit 212a05a345)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/LibvirtComputingResource.java
Removing real IPs from the tests because they cause a long running time for LibvirtComputingResourceTest
- In a local machine it takes 1.977s, but in a KVM test environment it's taking 257.879 sec
Fixing typo on LibvirtRequestWrapper
- Replace linbvirtCommands by libvirtCommands on LibvirtRequestWrapper
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This closes#255
- The test was okay, but when running in an environment where a /root/.ssh/id_rsa existed, it would return true then fail
- We now mock the calls to methods that return the key paths, instead of relying in the static variables
- Adding LibvirtNetworkElementCommandWrapper and LibvirtStorageSubSystemCommandWrapper
- 2 unit tests added
- KVM hypervisor plugin with 22.2% coverage
I also refactored the StorageSubSystemCommand interface into an abstract class
- Remove the pseudo-multiple-inheritance implementation
- The StorageSubSystemCommand was an interface, not related to the Command class
and its implementation were extending the Command class anyway. The whole structure is better now.
- Addin LibvirtPvlanSetupCommandWrapper
- 6 unit tests added
- KVM hypervisor plugin with 21% coverage
From the 6 tests added, 2 were extra tests to increase the coverage of the LibvirtStopCommandWrapper
- Increased from 35% to 78.7%
- Adding LibvirtCopyVolumeCommandWrapper
Refactoring the LibvirtUtilitiesHelper
- Changing method name
Did not add any test to this commit due to the refactor mentioned abot.
Will proceed and add the tests
i# Please enter the commit message for your changes. Lines starting
- Gave it a better, more suggestive, name since I now added other methods to the class.
- It makes easier to mock objects and get a better coverage of the classes
- Adding LibvirtBackupSnapshotCommandWrapper, LibvirtCreatePrivateTemplateFromVolumeCommandWrapper and LibvirtManageSnapshotCommandWrapper
- 3 unit tests added
- KVM hypervisor plugin with 18.3% coverage
Less tests added to those classes because the code is quite complex and way too long.
The tests added are just covering the new flow, to make sure it works fine. I will come back to those classes later.
- Adding LibvirtOvsDestroyBridgeCommandWrapper, LibvirtOvsSetupBridgeCommandWrapper
- 4 unit tests added
- KVM hypervisor plugin with 13.9% coverage
More tests added to cover LibvirtPrepareForMigrationCommandWrapper
- Coverage of this wrapper broght from 37% to 90.6%
- 4 new tests added
- Adding LibvirtCheckConsoleProxyLoadCommandWrapper, LibvirtConsoleProxyLoadCommandWrapper, LibvirtWatchConsoleProxyLoadCommandWrapperand CitrixConsoleProxyLoadCommandWrapper
- 2 unit tests added
- KVM hypervisor plugin with 12% coverage
Refactored the CommandWrapper interface in order to remove the esecuteProxyLoadScan, which is now
implemented bu subclasses.
- Adding LibvirtGetHosStatsCommandWrapper
- 1 unit test added
- KVM hypervisor with 10.5% coverage
Tests are a bit limited on this one becuause of the current implementation. Would clean it up later in a separate branch
- Adding LibvirtGetVmStatsCommandWrapper
- 3 unit tests
Refactored the LibvirtConnectiobn by surrounding it with an wrapper.
- Make it easier to cover the static/native calls
- Added better coverage to StopCommand tests
- Adding LibvirtStopCommandWrapper
- LibvirtRequestWrapper
- 1 unit tests
Refactored the RequestWrapper to make it better.
- Changes also applied to the CitrixRequestWrapper
Linux kernel supports vmxnet3, allowing it in KVM plugin would allow us to
run ESX hosts on KVM hosts using CloudStack with vmxnet3 nic which can be
passed as VM's nicAdapter detail
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit e02d787f30)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This improvements checks for "guest.cpu.features" property which is a space
separated list of cpu features that is specific for a host. When added, it
will add <feature policy='require' name='{{feature-you-listed}}'/> in the
<cpu> section of the generated vm spec xml.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit ea7fd37783)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The only artifact resolved from libvirt.org was org.libvirt:libvirt:0.5.1
this artifact is now available from maven's default central repository
This closes#180
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
As suggested by Wido on the dev ML changing the repo to eu.ceph.com to avoid
build failures. Will revert if ceph.com is up again.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit c9fd57fff3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CentOS 7 does not ship with ifconfig anymore. We should use ip commands instead.
This also works on older versions, like CentOS 6 and Ubuntu 12.x/14.x, that we
support.
This closes#165
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- use sticky chmod 1777 on the mountpoint
- remove dead code
(cherry picked from commit eea716b791)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
1. provide compatibility with the Big Cloud Fabric (BCF) controller
L2 Connectivity Service in both VPC and non-VPC modes
2. virtual network terminology updates: VNS --> BCF_SEGMENT
3. uses HTTPS with trust-always certificate handling
4. topology sync support with BCF controller
5. support multiple (two) BCF controllers with HA
6. support VM migration
7. support Firewall, Static NAT, and Source NAT with NAT enabled option
8. add VifDriver for Indigo Virtual Switch (IVS)
This closes#151
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- With the changes added by the rVPC work, the bump priority became deprecated.
This commit includes a refactor to get it removed from the following resources:
* Java classes
* domain_router table - removing the is_priority_bumpup column
* Fixing unit tests
All changes were tested with:
XenServer 6.2 running under our VMWare zone
CloudStack Management Server running on MacBook Pro
MySql running on MackBook Pro
Storage Type: Local
Started the refactor of the XenServer56Resource class
- Unit test added
Changing the CitrixRequestWrapper in order to cope with multiple resources classes and commands
Still have to remove few methods form CitrixResourceBase
- Unit tests added
In the executeRequest I needed to keep the following:
// We need this one because the StorageSubSystemCommand is from another hierarchy.
if (cmd instanceof StorageSubSystemCommand) {
return storageHandler.handleStorageCommands((StorageSubSystemCommand) cmd);
}
- Added basic tests
- Changed the way RebootCommand gets called from RebootRouterCommand
- Made a couple of methods public in the CitrixResourceBase and its subclasses
Sonarcube is great, but has no context and can be wrong, in this
case File.separator is nice if you're running platform independent,
the agent on OVM3 is however NOT platform independent and will break
if we feed it windows separators.
The copy command reply can have null size returned, so check and set values
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 53ca0b1861)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fix: RTNETLINK errors
- Management Server health check trying to create already existing interface
- Changes on update_config.py, cs_guestnetwork.py, merger.py
Fix: replace RRouTER_LOG in the CsRedundant.py per log file location
Fix: Guest Net address association during Router restart
- Changes on NicProfileHelper, NicProfileHelperImpl
Fix: aggregationExecution() method on VirtualNetworkApplianceManagerImpl
- Do not send an AggregationControlCommand to a non-configured router
Some classes have been formatted.
Added a source column to the user table.
Source now has only two values UNKNOWN,LDAP with UNKNOWN being the
default and is an enum is com.cloud.User.
When the source is UNKNOWN, the old method of authenticating against all
the available authenticators is used. If a source is available, only
that particular authenticator will be used.
added overloaded methods in AccountService to createUserAccount and
createUser with source specified.
(cherry picked from commit 5da733072e)
MigrateVMWithVolumes-
1. If ESXi host version is below 5.1, ensure destination datastore(s) is mounted on the source host, then migrate the storage and then finally migrate the VM.
If destination storage(s) is not mounted on the source host,
- In case of NFS storage mount the storage(s).
- In case of VMFS storage fail the request for migration.
2. If EXi host version is 5.1 or above, simultaneously migrate the VM and its storage to the destination host and storage(s) respectively for both NFS and VMFS storage.
This is a plugin that puts in ovm3 support ranging from 3.3.1 to 3.3.2. Basic
functionality is in here, advanced networking etc..
Snapshots only work when a VM is stopped now due to the semantics of OVM's raw
image implementation (so snapshots should work on a storage level underneath the
hypervisor shrug)
This closes#113
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When there is large size VR configuration (aggregate commands) copying data to VR using vmops plugin was failed
because of the ARG_MAX size limitation. The configuration data size is around 300KB.
Updated this to create file in host by scp with file contents. This will create file in host.
Then copy the file from the host to VR using hte vmops createFileInDomr method.
In host file get created in /tmp/ with name VR-<UUID>.cfg, once it copied to VR this file will be removed.
Refactored to use the XPatch expressions to check the generated domain xml rathern than string comparison.
Signed-off-by: Laszlo Hornyak <laszlo.hornyak@gmail.com>
Rohit Yadav
Nicolas Vazquez
Rohit Yadav
Simon Weller
Abhishek
sureshanaparti
Slair1
lzh3636
Mike Tutkowski
Wido den Hollander
Kris Sterckx
Khosrow Moossavi
Dingane Hlaluku
Paul Angus
Paul Angus
Daan Hoogland
dahn
David Passante
cl-k-takahashi
瓜@アイソマ:ゆるゆりはいいぞ
Mike Tutkowski
Nathan Johnson
Kui LIU
Rafael Weingärtner
brett
lzh3636
Raf Smeets
mrunalinikankariya
Frank Maximus
Khosrow Moossavi
Marc-Aurèle Brothier
Abhinandan Prateek
koushik-das
jayakarteek
Remi Bergsma
Sigert Goeminne
pedro-martins
Rohit Yadav
Bitworks Software, Ltd
SudharmaJain
vedulasantosh
subhash yedugundla
Gabriel Beims Bräscher
Boris Stoyanov
sureshanaparti
Sateesh Chodapuneedi
subhash yedugundla
Rajani Karuturi
Rene Moser
Anshul Gangwar
nvazquez
Wei Zhou
Nitin Kumar Maharana
Rajani Karuturi
Rajani Karuturi
Bharat Kumar
Jayapal
rashmidixit
Sudhansu
Mowgli
Nathan Johnson
Anshul And Priyank
Kishan Kavala
Anshul Gangwar
Syed
Murali Reddy
Abhinandan Prateek
Suresh Kumar Anaparti
Koushik Das
John Burwell
Nemo
Rafael Weingärtner
Will Stevens
Aaron Hurt
Aaron Hurt
Sverrir A. Berg
Maneesha.P
NuxRo
Dmytro Shevchenko
Daan Hoogland
gabrascher
Nitin Kumar Maharana
cirstofolini
Boris Schrijver
SudharmaJain
Nick Livens
Josh Harshman
Sateesh Chodapuneedi
Devdeep Singh
Wilder Rodrigues
Funs Kessen
David Mabry
Satoru Nakaya
Vincent Bernat
Kevin McCormick
Rajani Karuturi
Likitha Shetty
Miguel Ferreira
Aaron Brady
Funs
Wido den Hollander
Jayapal
Rafael da Fonseca
Sanjay Tripathi
Laszlo Hornyak
Daan Hoogland
KC Wang
afornie
Hugo Trippaers
punith-cloudbyte
Marcus Sorensen
