The 'force' option provided with the stopVirtualMachine API command is
often assumed to be a hard shutdown sent to the hypervisor, when in fact
it is for CloudStacks' internal use. CloudStack should be able to send
the 'hard' power-off request to the hosts.
When forced parameter on the stopVM API is true, power off (hard shutdown)
a VM. This uses initial changes from #1635 to pass the forced parameter
to hypervisor plugin via the StopCommand, and fixes force stop (poweroff)
handling for KVM, VMware and XenServer.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
given is running out of capacity. If host id is specified the deployment should happen
on the given host and it should fail if the host is out of capacity. We are retrying
deployment on the entire zone without the given host id if we fail once. The retry,
which will retry on other hosts, should only be attempted if host id isn't given.
Also, introduces global setting
allow.deploy.vm.if.deploy.on.given.host.fails with which old behaviour
can be restored
A root volume can be replaced by a different root volume without the VM it belongs to being expunged.
From dev@:
For example: Let’s say we have a system VM running on NFS primary storage. We then put this primary storage into maintenance mode, which creates the system VM (with the same name) on a different primary storage (we do not create a new row in the cloud.vm_instance table for this VM). While this VM works, the original root disk of the system VM remains on the original primary storage and is not destroyed by the code in StorageManagerImpl.cleanupStorage(boolean) in 4.10 because 4.10 (as shown above) only asks for non-root volumes to consider for deletion. In the 4.9 version of the code, the original root disk is cleaned up in StorageManagerImpl.cleanupStorage(boolean). The problem with 4.10 relying on a root disk always being deleted when the VM it belongs to is deleted is that in a situation like this that the system VM doesn’t get deleted at this point – it gets a new root disk that’s hosted by a different primary storage (so now it’s original root disk is stranded).
1. Removed XenServerGuestOsMemoryMap from CitrixHelper.java
This java file was holding a static in memory map named XenServerGuestOsMemoryMap. This was the source for xenserver dynamic memory values(max and min). These values were moved to guest_os_details table.
2. DAO layer was modified to access these values.
3. VirtualMachineTo object was modified to populate the dynamic memory values.
4. addGuestOs and UpdateGuestOS api has been modified to update memory values.
removed code which nullifies vm_instance_id
Also modified QueryManagerImpl to ignore volume which does not have uuid. This is to avoid duplicate volume listing.
This fixes the agreed upon url on download.cloudstack.org in various
sql files and misc scripts.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[4.10-blocker] Fix error in restart network in 4.10.0.0 RCThe PR fixes the error in restart network:
2017-04-04 10:27:39,217 DEBUG [c.c.n.r.NetworkHelperImpl] (API-Job-Executor-2:ctx-08904854 job-29417 ctx-3405d3f2) (logid:19bbd6e6) Router requires upgrade. Unable to send command to router:9784, router template version : Cloudstack Release 4.10.0 Wed Feb 15 05:42:18 UTC 2017, minimal required version : 4.10.0.0
It works after changing minreq.sysvmtemplate.version from 4.10.0.0 to 4.10.0
* pr/2025:
Fix error in restart network in 4.10.0.0 RC
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9783: Improve metrics view performanceThis improves the metrics view feature by improving the rendering performance
of metrics view tables, by re-implementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance that re-implement the frontend logic at backend:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Pinging for review - @abhinandanprateek @DaanHoogland @borisstoyanov @karuturi @rashmidixit
Marvin test results:
=== TestName: test_list_clusters_metrics | Status : SUCCESS ===
=== TestName: test_list_hosts_metrics | Status : SUCCESS ===
=== TestName: test_list_infrastructure_metrics | Status : SUCCESS ===
=== TestName: test_list_pstorage_metrics | Status : SUCCESS ===
=== TestName: test_list_vms_metrics | Status : SUCCESS ===
=== TestName: test_list_volumes_metrics | Status : SUCCESS ===
=== TestName: test_list_zones_metrics | Status : SUCCESS ===
* pr/1944:
CLOUDSTACK-9783: Improve metrics view performance
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Fix for test_snapshots.py using nfs2 instead of nfs templateFix for marvin test failure introduced in #1847
Cc: @borisstoyanov @rhtyd @karuturi
* pr/1961:
Fix for test failure
Fix for test_snapshots.py using nfs2 instead of nfs template
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
There are some VM deployment failures happening when multiple VMs are deployed at a time, failures mainly due to NetworkModel code that iterates over all the vlans in the pod. This causes each deployVM thread to hold the global lock on Network longer and cause delays. This delay in turn causes more threads to choose same host and fail since capacity is not available on that host.
Following are some changes required to be done to reduce delays during VM deployments which in turn causes some vm deployment failures when multiple VMs are launched at a time.
In Planner, remove the clusters that do not contain a host with matching service offering tag. This will save some iterations over clusters that dont have matching tagged host
In NetworkModel, do not query the vlans for the pod within the loop. Also optimized the logic to query the ip/ipv6
In DeploymentPlanningManagerImpl, do not process the affinity group if the plan has hostId provided.
* 4.9:
moved logrotate from cron.daily to cron.hourly for vpcrouter in cloud-early-config
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
[4.9] CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agentThe router.aggregation.command.each.timeout in global configuration is only applied on new created KVM host.
For existing KVM host, changing the value will not be effective.
We need to propagate the configuration to existing host when cloudstack-agent is connected.
* pr/1856:
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
In case of vmware host failure, all the VMs including stopped VMs migrate
to the new host. For the Stopped Vms powerhost gets updated. This was
triggering HandlePowerStateReport which finally calls updatePowerState
updating update_time for the VM. This cause the capacity being reserved
for stopped VMs.
CLOUDSTACK 9601: Upgrade: change logic for update path for filesFor going from version A to version D, it uses to run the SQL files in
that order: A -> B -> C -> D -> A-cleanup -> B-cleanup -> C-cleanup ->
D-cleanup. If you had upgraded each version separatively you would have
run A -> A-cleanup -> B -> B-cleanup -> C -> C-cleanup -> D ->
D-cleanup.
This change the logic to follow the same path if you are jumping over
versions.
Signed-off-by: Marc-Aurle Brothier <m@brothier.org>
* pr/1768:
Upgrade: change logic for update path for files
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This improves the metrics view feature by improving the rendering performance
of metrics view tables, by reimplementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9660: NPE while destroying volumes during 1000 VMs deploy and destroy tests
NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle
only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
* pr/1825:
CLOUDSTACK-9660: NPE while destroying volumes during 1000 VMs deploy and destroy tests NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
ipv6: Set IPv6 CIDR and Gateway in 'nic' profileWithout this information a NPE might be triggered when starting a VR, SSVM or CP
as this information is read from the 'nics' table and causes a NPE.
During deployment we should set the IPv6 Gateway and CIDR for the NIC object so that
it is persisted to the database.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* pr/1927:
ipv6: Set IPv6 CIDR and Gateway in 'nic' profile
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
For going from version A to version D, it uses to run the SQL files in
that order: A -> B -> C -> D -> A-cleanup -> B-cleanup -> C-cleanup ->
D-cleanup. If you had upgraded each version separatively you would have
run A -> A-cleanup -> B -> B-cleanup -> C -> C-cleanup -> D ->
D-cleanup.
This change the logic to follow the same path if you are jumping over
versions.
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
CLOUDSTACK-9766 : Executing deleteSnapshot api with already deleted sIf we try to delete the snapshot which is already deleted, then no proper error appears in the log and it just try to delete the snapshot which is already deleted.
Steps to reproduce :
-------
1-create a snapshot
2-delete the snapshot
3-try to delete snapshot which is deleted in step 2
Expected Result
-------------
Result should show proper error message. Request for deleting already deleted snapshot should not be placed.
* pr/1924:
CLOUDSTACK-9766 : Executing deleteSnapshot api with already deleted snapshot does not throw any exception or failure message
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9574: Redesign storage views## Part 1: Redesign storage tags
### Actual behavior
Primary storage tags are being saved as an entry on `storage_pool_details` with:
* name = TAG_NAME
* value = "true"
When a boolean property is defined in {{storage_pool_details}} and has value = "true", it is displayed as a tag.
### Goal
Redesign `Storage Tags` for Primary Storage view, to list only tags, as it is done in Host Tags (Hosts view).
## Part 2: Remove details from listImageStores API call response and UI
### Description
In Secondary Storage view we propose removing `Details` field, as `Setting` tab list details for a given image store. We also remove details from response on `listImageStores` API method
* pr/1747:
CLOUDSTACK-9574: Redesign storage tags and remove details from listImageStores response and UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This closes#1644
* 4.9:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage.
This is the same as PR #1644 applied to 4.9, as per @jburwell
* pr/1697:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9738: [Vmware] Optimize vm expunge process for instances with vm snapshots## Description
It was noticed that expunging instances with many vm snapshots took a look of time, as hypervisor received as many tasks as vm snapshots instance had, apart from the delete vm task. We propose a way to optimize this process for instances with vm snapshots by sending only one delete task to hypervisor, which will delete vm and its snapshots
## Use cases
1. deleteVMsnapohsot-> no changes to current behavior
2. destroyVM with expunge=false -> no actions to VMsnaphsot is performed at the moment. When VM cleanup thread is executed it will perform the same sequence as (3). If instance is recovered before expunged by the cleanup thread it will remain intact with VMSnapshot chain present
3. destroyVM with expunge=true:
* Vmsnaphsot is marked with removed timestamp and state = Expunging in DB
* VM is deleted in HW
* pr/1905:
CLOUDSTACK-9738: [Vmware] Optimize vm expunge process for instances with vm snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Without this information a NPE might be triggered when starting a VR, SSVM or CP
as this information is read from the 'nics' table and causes a NPE.
During deployment we should set the IPv6 Gateway and CIDR for the NIC object so that
it is persisted to the database.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
[4.10] CLOUDSTACK-8746: VM Snapshotting implementation for KVM
* pr/977:
Fixes for testing VM Snapshots on KVM. Related to PR 977
CLOUDSTACK-8746: vm snapshot implementation for KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9619: Updates for SAN-assisted snapshotsThis PR is to address a few issues in #1600 (which was recently merged to master for 4.10).
In StorageSystemDataMotionStrategy.performCopyOfVdi we call getSnapshotDetails. In one such scenario, the source snapshot in question is coming from secondary storage (when we are creating a new volume on managed storage from a snapshot of ours thats on secondary storage).
This usually worked in the regression tests due to a bit of "luck": We retrieve the ID of the snapshot (which is on secondary storage) and then try to pull out its StorageVO object (which is for primary storage). If you happen to have a primary storage that matches the ID (which is the ID of a secondary storage), then getSnapshotDetails populates its Map<String, String> with inapplicable data (that is later ignored) and you dont easily see a problem. However, if you dont have a primary storage that matches that ID (which I didnt today because I had removed that primary storage), then a NullPointerException is thrown.
I have fixed that issue by skipping getSnapshotDetails if the source is coming from secondary storage.
While fixing that, I noticed a couple more problems:
1) We can invoke grantAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
2) We can invoke revokeAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
I have corrected those issues, as well.
I then came across one more problem:
When using a SAN snapshot and copying it to secondary storage or creating a new managed-storage volume from a snapshot of ours on secondary storage, we attach to the SR in the XenServer code, but detach from it in the StorageSystemDataMotionStrategy code (by sending a message to the XenServer code to perform an SR detach). Since we know to detach from the SR after the copy is done, we should detach from the SR in the XenServer code (without that code having to be explicitly called from outside of the XenServer logic).
I went ahead and changed that, as well.
JIRA Ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-9619
* pr/1749:
CLOUDSTACK-9619: Updates for SAN-assisted snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
- Switches Travis to use jdk1.8
- Changes java-version to 1.8
- Change jdk/maven version to 1.8
- Switch to F5/java8 compatible library release
- Switch packaging to use jdk 1.8, and jre 1.8 in init/systemd scripts
- Switch systemvm to openjdk-8-jre
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9456: Migrate master to Spring 4.xThis changes makes CloudStack use spring 4:
```
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK7
- Bump servet dependency version
- Migrates various xmls to use version independent schema uris
```
Outstanding issue:
- Testing of various non-standard plugins such as network and storage plugins etc.
Since, this is a big change pinging for review -- @jburwell @karuturi @wido @murali-reddy @abhinandanprateek @DaanHoogland @GaborApatiNagy @JayapalUradi @kishankavala @K0zka @nvazquez @rafaelweingartner @pyr and others
@blueorangutan package
* pr/1638:
CLOUDSTACK-9456: Update Spring version in maven poms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9597: Should not fetch resource count for removed entityFetch the number of resourceCount by domain and account excluding the removed ones.
Signed-off-by: Marc-Aurle Brothier <m@brothier.org>
* pr/1764:
CLOUDSTACK-9597: Should not fetch resource count for removed entity
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Rvr Network with cleanup which is updated from the isolated network is failed.
Corrected the column name string issue.
This closes#1781
(cherry picked from commit 0f742e1723)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9683: system.vm.default.hypervisor will pin the hypervisor for VR too with this fix
* pr/1839:
CLOUDSTACK-9683: system.vm.default.hypervisor will pin the hypervisor for VR too with this fix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
store ref table so builtin template is never downloaded completely
In handleSysTemplateDownload method creating template only if there exists no entry
handleTemplateSync will take care of other scenario
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8908 After copying the template charging for that template is getting stoppedThis is happening as the zone id is not part of the query. Zone id is added to the query and unit tests are also added
* pr/896:
CLOUDSTACK-8908 After copying the template charging for that template is stopped
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle
only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
CLOUDSTACK-9627 Fix template sync for region store.When using a region store like Swift or S3 as secondary storage,
the `zoneId` can be null. This causes an exception when we try
to convert it to a `long`. This fix guards against that.
Before this fix, if you restart the management server, all the templates
would change to "NOT READY" because the code which syncs the NFS cache
and the object store crashes due to the above mentioned issue.
This PR fixes that.
* pr/1772:
CLOUDSTACK-9627:Fix template sync for region store
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Upgrades Maven dependency version to v1.55
- Fixes bountycastle usages and issues
- Adds timeout to jetty/annotation scanning
- Fixes servlet issue, uses servlet 3.1.0
- Downgrade javassist used by reflections to fix annotation process errors
- Make console-proxy-rdp bc dependency same as rest of the codebase
- Picks up PR #1510 by Daan
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Introduced a global configuration flag 'cluster.threshold.enabled'. By default the flag is true.
If the value is false, then a VM can be started in a cluster even if the cluster thresholds are
crossed. However, for a new VM deployment the cluster threshold will always be honoured.
CLOUDSTACK-9538: FIX failure in Deleting Snapshot From Primary Storage RBD Storage if vm has been removed
* pr/1710:
CLOUDSTACK-9538: FIX failure in Deleting Snapshot From Primary Storage RBD Storage if vm has been removed
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP pluginSupport for underlay features (Source & Static NAT to underlay) with Nuage VSP SDN Plugin including Marvin test coverage for corresponding Source & Static NAT features on master. Moreover, our Marvin tests are written in such a way that they can validate our supported feature set with both Nuage VSP SDN platform's overlay and underlay infra.
PR contents:
1) Support for Source NAT to underlay feature on master with Nuage VSP SDN Plugin.
2) Support for Static NAT to underlay feature on master with Nuage VSP SDN Plugin.
3) Marvin test coverage for Source & Static NAT to underlay on master with Nuage VSP SDN Plugin.
4) Enhancements on our exiting Marvin test code (nuagevsp plugins directory).
5) PEP8 & PyFlakes compliance with our Marvin test code.
* pr/1580:
CLOUDSTACK-9402 : Support for underlay features (Source & Static NAT to underlay) in Nuage VSP plugin
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9402 : Marvin tests for Source NAT and Static NAT features verification with NuageVsp (both overlay and underlay infra).
Co-Authored-By: Prashanth Manthena <prashanth.manthena@nuagenetworks.net>, Frank Maximus <frank.maximus@nuagenetworks.net>
CLOUDSTACK-9561 After domain/account deletion, snapshot taken by the
domain/account remains undeleted
While deleting the UserAccount Cleanup for the removed VMs/volumes are not
happening. For the removed VMs, snapshots doesn't get cleaned. Only for running
VMs(volumes in ready state) the cleanup happens.
When the VM is desroyed, the volume is marked as destroyed and later storage
garbage collector perform the cleanup. But if we try delete domain/account
before storage garbage collector runs, then it fails.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR adds an ability to Pass a new parameter, locationType,
to the “createSnapshot” API command. Depending on the locationType,
we decide where the snapshot should go in case of managed storage.
There are two possible values for the locationType param
1) `Standard`: The standard operation for managed storage is to
keep the snapshot on the device. For non-managed storage, this will
be to upload it to secondary storage. This option will be the
default.
2) `Archive`: Applicable only to managed storage. This will
keep the snapshot on the secondary storage. For non-managed
storage, this will result in an error.
The reason for implementing this feature is to avoid a single
point of failure for primary storage. Right now in case of managed
storage, if the primary storage goes down, there is no easy way
to recover data as all snapshots are also stored on the primary.
This features allows us to mitigate that risk.
KVM hosts on shared storage failure was accepted by mgmt server with the
host state as Up, even though there was no primary/shared storage available on
it. This patch offers a quick fix by throwing an exception in the storage monitor
which connects storage pool on host. The failure is trapped by agent manager
that disconnects the agent without any investigation.
Based on Lab tests, KVM agent may take upto 2 minutes to attempt NFS mount when
the storage is inaccessible (firewalled, or shutdown) before returning back with
an error. It is safe to assume that this won't add pressure on mgmt server due to
several reconnection attempts, and KVM agent would retry reconnection every 2
minutes.
For such KVM hosts, where failure happens due to storage issues; they will be
briefly put in Alert state but will be mostly be in Connecting state during which
the KVM host attempts to mount/reconfigure NFS storage pool.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
Conflicts:
engine/schema/src/com/cloud/upgrade/DatabaseUpgradeChecker.java
engine/schema/test/com/cloud/upgrade/DatabaseUpgradeCheckerTest.java
tools/marvin/setup.py
This fixes class names to make things consistent as per the 4.9 PR on master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Renames schema-490to491*.sql to schema490to4910*.sql
* Renames the Upgrade490to491 class to Upgrade490to4910
* Removes the unused s_logger contant from Upgrade490to4910
* Updates the version in tools/marvin/setup to 4.9.1.0-SNAPSHOT
Updating pom.xml version numbers for release 4.8.2.0-SNAPSHOTOften, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: John Burwell <meaux@cockamamy.net>
/cc @rhtyd @karuturi
* pr/1654:
Adds support for four position versions and optional db upgrades
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In the 4.1.0-4.2.0 db upgrade path, it creates new tables to store secondary
(nfs) storage in image_store table and volumes in volume_store_ref table. In
the upgrade path, it first tries to migrate NFS storage pool where it excludes
storage pools which have been removed, but it migrates all the volumes without
checking if their storage pools have been removed. This causes fk constraint
failure as the volume/row being inserted refers to a storage pool which does
not exist in the image_store table.
The fix migrates all the nfs storage pools to image_store including removed
storage pools and in doing so migrates with the 'removed' field. This fixes
db upgrade for old pre-4.0 and 4.0/4.1 CloudStack clouds.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
[4.9/LTS] Add upgrade path from 4.9.0 to 4.9.1, change version to 4.9.1.0-SNAPSHOTThis adds db upgrade path from 4.9.0 to 4.9.1 and fixes a typo in default user role description (CLOUDSTACK-9449)
/cc @karuturi @jburwell -- this will cause issues when fwd-merged to master, I can do the fwd-merging if you would like to avoid fixing the conflicts yourself
@blueorangutan package
* pr/1646:
Updating pom.xml version numbers for release 4.9.1.0-SNAPSHOT
cloudstack: upgrade path from 4.9.0 to 4.9.1
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Adds db upgrade path from 4.9.0 to 4.9.1
- CLOUDSTACK-9449: Fix typo in default user role description
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Adds role_id column to cloud_usage.account, fixes UsageDaoImpl to insert
Accounts with role_id from account table.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9238: Fix URL length to 2048 for all url fields in VOI will update the PR to add max field length in the API commands too
* pr/1567:
API: update url field max length
not needed on host table
Fix URL length to 2048 for all url fields in VO
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Dynamically load drivers before creating our DB connectionsSolution to the mailing thread titled "MySQL : No suitable driver found for jdbc:mysql".
It doesn't harm that we explicitely load the MySQL driver, and for those which would use a commons-dbcp version < 1.4 this would fix it as well. Since JDBC 4.0, the JDBC driver can auto-register itself, but for some weird cases (like ours), it's not working. Therefore we need to explicitly load the JDBC driver.
* pr/1553:
Dynamic loading of DB driver + support for other DB providers
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Remodeling of Nuage VSP Plugin + CLOUDSTACK-9294Hi all,
We've remodeled the Nuage VSP plugin to use the same model as VMWare is using (non-OSS). Before, we had a runtime dependency to the Nuage Client, this has been changed to a compile-time dependency instead because of multiple reasons (build management, readability, maintainability, ...)
We've adapted the code so it now uses model objects defined in the Nuage client instead of passing a list of parameters to the Nuage client. This is a lot more readable, and a lot more maintainable.
I've had a chat with @DaanHoogland about this approach, and he told me that ACS is trying to move away from the whole non-OSS approach. We're looking into the Juniper approach, we would set up a custom maven repository which would host the required dependencies for the Nuage VSP plugin.
Any remarks or suggestions are always welcome :)
* pr/1494:
Nuage VSP : Extending Marvin test coverage
Nuage VSP : Fix for NPE while cleaning up account when there are still resources belonging to that account
CLOUDSTACK-9294 : Make sure to remove VR from VSD when removing the VPC
CLOUDSTACK-9242 : Remodel Nuage VSP plugin
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices existexternal network device usage monitor thread that runs every 5mins by default (based on global config external.network.stats.interval) and runs coalesce query to acquire a lock. When there are no external devices exist, there is no need to run usage collection.
Added test case to verify that usage collection task is not run when there are no External LB or External FW
* pr/846:
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices exist
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6928: fix issue disk I/O throttling not appliedDisk IO throttling (for KVM) is not applied in the merge of 4.2.
Tests passed:
(1) start vm
(2) attach volume
(3) start vm with volume
(4) migrate vm (with volume)
* pr/1410:
CLOUDSTACK-6928: fix issue disk I/O throttling not applied
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9348: NioConnection improvementsReopened PR with squashed changes for a re-review and testing after https://github.com/apache/cloudstack/pull/1493 and sub-sequent PRs got reverted
* pr/1549:
CLOUDSTACK-9348: NioConnection improvements
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignoredDisable and Remove Host operation disables the primary storage capacity.
Steps to replicate:
Base Condition: There exists a host and storage pool with same id
Steps:
1. Find a host and storage pool having same id
2. Disable the host
3. CPU(1) and MEMORY(0) capacity in op_host_capacity for above host is disabled
4. STORAGE(3) capacity in op_host_capacity for storage pool with id same as above host is also disabled
RCA:
'host_id' column in 'op_host_capacity' table used for storing both storage pool id (for STORAGE capacity) and host id (MEMORY and CPU). While disabling a HOST we also disable the capacity associated with host.
Ideally while disabling capacity we should only disable MEMORY and CPU capacity, but we are not doing so.
Code Path:
ResourceManagerImpl.doDeleteHost() -> ResourceManagerImpl.resourceStateTransitTo() -> CapacityDaoImpl.updateCapacityState(null, null, null, host.getId(), capacityState.toString())
updateCapacityState is updating disabling all entries which matches the host_id. This will also disable a entry having storage pool id same as that of host id.
Changes:
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Test Result:
```
Before Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
9 rows in set (0.00 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Disabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
After Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.01 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.00 sec)
Sudhansus-MAC:cloudstack sudhansu$ nosetests-2.7 --with-marvin --marvin-config=setup/dev/advanced.cfg test/integration/component/maint/test_capacity_host_delete.py
==== Marvin Init Started ====
=== Marvin Parse Config Successful ===
=== Marvin Setting TestData Successful===
==== Log Folder Path: /tmp//MarvinLogs//Apr_22_2016_22_42_27_X4VBWD. All logs will be available here ====
=== Marvin Init Logging Successful===
==== Marvin Init Successful ====
===final results are now copied to: /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB===
Sudhansus-MAC:cloudstack sudhansu$ cat /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB/results.txt
test_01_op_host_capacity_disable_host (integration.component.maint.test_capacity_host_delete.TestHosts) ... === TestName: test_01_op_host_capacity_disable_host | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 0.168s
OK
```
* pr/1516:
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
dynamic-roles: packaging improvementsOn some MySQL server envs, this may cause a SQL statement error, though
I was unable to reproduce it. Since it's not needed, an order by 'sort_order'
is enough, we can safely remove it.
/cc @swill @anshulgangwar @DaanHoogland and others
* pr/1551:
migrate-dynamicroles: use mysql.connector due to #1054
packaging: don't bundle systemvm.zip in rpms
packaging: backup commands.properties as it does not exist in new rpms
dynamic-roles: remove unnecessary order by ID
Signed-off-by: Will Stevens <williamstevens@gmail.com>
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Added conditions to ensure the capacity_type is added only when capacity_type length is greater than 0.
Added checks in marvin test to ensure the capacity exists for a host before disabling it.
Added checks to avoid index out of range exception
- Unit test to demonstrate denial of service attack
The NioConnection uses blocking handlers for various events such as connect,
accept, read, write. In case a client connects NioServer (used by
agent mgr to service agents on port 8250) but fails to participate in SSL
handshake or just sits idle, this would block the main IO/selector loop in
NioConnection. Such a client could be either malicious or aggresive.
This unit test demonstrates such a malicious client that can perform a
denial-of-service attack on NioServer that blocks it to serve any other client.
- Use non-blocking SSL handshake
- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling ssl handshakes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.7:
Fix Sync of template.properties in Swift
Configure rVPC for router.redundant.vrrp.interval advert_int setting
Have rVPCs use the router.redundant.vrrp.interval setting
Resolve conflict as forceencap is already in master
Split the cidr lists so we won't hit the iptables-resture limits
Check the existence of 'forceencap' parameter before use
Do not load previous firewall rules as we replace everyhing anyway
Wait for dnsmasq to finish restart
Remove duplicate spaces, and thus duplicate rules.
Restore iptables at once using iptables-restore instead of calling iptables numerous times
Add iptables copnversion script.
On some MySQL server envs, this may cause a SQL statement error, though
I was unable to reproduce it. Since it's not needed, an order by 'sort_order'
is enough, we can safely remove it.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This reverts commit 7ce0e10fbc, reversing
changes made to 29ba71f2db.
This was reverted because it seemed to be related to an issue
when doing a DeployDC, causing an `addHost` error.
CLOUDSTACK-9265 cleanup around httpclient versionssome cleanup done
- replaced HttpStatus from org.apache.commons.httpclient with that from org.apache.http
- removed unthrown HttpException
- left auto reformat in place
* pr/1385:
CLOUDSTACK-9265 cleanup around httpclient versions
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
This PR addresses the following JIRA ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-8813
The problem is that there needs to be notifications sent when a host is added to, about to be removed from, and removed from a cluster.
Such notifications can be used for many purposes. For example, it can allow storage plug-ins to update ACLs on their storage systems. Also, it can allow us to clean up IQNs from ESXi hosts that are no longer needed.
* pr/816:
CLOUDSTACK-8813: Notify listeners when a host has been added to a cluster, is about to be removed from a cluster, or has been removed from a cluster
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Support access to a host’s out-of-band management interface (e.g. IPMI, iLO,
DRAC, etc.) to manage host power operations (on/off etc.) and querying current
power state in CloudStack.
Given the wide range of out-of-band management interfaces such as iLO and iDRA,
the service implementation allows for development of separate drivers as plugins.
This feature comes with a ipmitool based driver that uses the
ipmitool (http://linux.die.net/man/1/ipmitool) to communicate with any
out-of-band management interface that support IPMI 2.0.
This feature allows following common use-cases:
- Restarting stalled/failed hosts
- Powering off under-utilised hosts
- Powering on hosts for provisioning or to increase capacity
- Allowing system administrators to see the current power state of the host
For testing this feature `ipmisim` can be used:
https://pypi.python.org/pypi/ipmisim
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Out-of-band+Management+for+CloudStack
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows root administrators to define new roles and associate API
permissions to them.
A limited form of role-based access control for the CloudStack management server
API is provided through a properties file, commands.properties, embedded in the
WAR distribution. Therefore, customizing API permissions requires unpacking the
distribution and modifying this file consistently on all servers. The old system
also does not permit the specification of additional roles.
FS:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Dynamic+Role+Based+API+Access+Checker+for+CloudStack
DB-Backed Dynamic Role Based API Access Checker for CloudStack brings following
changes, features and use-cases:
- Moves the API access definitions from commands.properties to the mgmt server DB
- Allows defining custom roles (such as a read-only ROOT admin) beyond the
current set of four (4) roles
- All roles will resolve to one of the four known roles types (Admin, Resource
Admin, Domain Admin and User) which maintains this association by requiring
all new defined roles to specify a role type.
- Allows changes to roles and API permissions per role at runtime including additions or
removal of roles and/or modifications of permissions, without the need
of restarting management server(s)
Upgrade/installation notes:
- The feature will be enabled by default for new installations, existing
deployments will continue to use the older static role based api access checker
with an option to enable this feature
- During fresh installation or upgrade, the upgrade paths will add four default
roles based on the four default role types
- For ease of migration, at the time of upgrade commands.properties will be used
to add existing set of permissions to the default roles. cloud.account
will have a new role_id column which will be populated based on default roles
as well
Dynamic-roles migration tool: scripts/util/migrate-dynamicroles.py
- Allows admins to migrate to the dynamic role based checker at a future date
- Performs a harder one-way migrate and update
- Migrates rules from existing commands.properties file into db and deprecates it
- Enables an internal hidden switch to enable dynamic role based checker feature
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8901: PrepareTemplate job thread hard-coded to max 8 threads The thread pool was hardcoded to use 8 threads,
com.cloud.template.TemplateManagerImpl.configure(String, Map<String, Object>):
_preloadExecutor = Executors.newFixedThreadPool(8, new NamedThreadFactory("Template-Preloader"));
Added the change to pick threadpool size from configuration.
* pr/880:
CLOUDSTACK-8901: PrepareTemplate job thread hard-coded to max 8 threads
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CID-1338387: Deletion of method endPointSelector.selectHypervisorHostFollowing the discussions and analysis presented on PR #1056 create by @DaanHoogland
This PR is intended to push those changes that were discussed there regarding the of endPointSelector.selectHypervisorHost method.
* pr/1124:
Deletion of method endPointSelector.selectHypervisorHost
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9348: Use non-blocking SSL handshake in NioConnection/Link- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling connect/accept events
Changes are covered the NioTest so I did not write a new test, advise how we can improve this. Further, I tried to invest time on writing a benchmark test to reproduce a degraded server but could not write it deterministic-ally (sometimes fails/passes but not always). Review, CI testing and feedback requested /cc @swill @jburwell @DaanHoogland @wido @remibergsma @rafaelweingartner @GabrielBrascher
* pr/1493:
CLOUDSTACK-9348: Use non-blocking SSL handshake
CLOUDSTACK-9348: Unit test to demonstrate denial of service attack
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8302: Removing snapshots on RBDSnapshot removing implemented if primary datastore is RBD
https://issues.apache.org/jira/browse/CLOUDSTACK-8302
* pr/1230:
CLOUDSTACK-8302 - Cleanup snapshot on KVM with RBD Snapshot removing implemented on RBD. 1. On management side: when created new shanpshot we checking if our primary storage is RBD, then do not remove record from cloud.snapshot_store_ref with link to Ceph image via 'install_path' field. 2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'. 3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
Signed-off-by: Will Stevens <williamstevens@gmail.com>
- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling ssl handshakes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM idWhen calling listServiceOfferings with VM id as parameter. It is returning incompatible tagged offerings. It should only list all compatible tagged offerings. Compatible means the new service offering should contain all the tags of the existing service offering(Existing offering SUBSET of new offering). If that is the case It should list in the result and can be upgraded to that offering.
* pr/1321:
CLOUDSTACK-8847: ListServiceOfferings is returning incompatible tagged offerings when called with VM id
Signed-off-by: Will Stevens <williamstevens@gmail.com>
engine/schema: fix upgrade path to work with MySQL 5.7Found this issue when using MySQL 5.7 with Ubuntu 16.04. The upgrade path fix removes an invalid `IGNORE` param that is deprecated now, in the upgrade path we run the alter statement to add an index only if it does not exist so we're good.
For MySQL 5.7, we'll also need to update the docs at some point to include `server-id` along with other parameters. Some of the SQL statements used throughout engine/schema don't adhere to SQL 99 standard which is enforced by default in MySQL 5.7, therefore the following sql-mode (for backward compatibility with mysql 5.6 modes) will be necessary for anyone willing to use MySQL 5.7 (until we fix codebase wide raw and generated sql statements to be SQL99 compliant):
sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION,ERROR_FOR_DIVISION_BY_ZERO,NO_ZERO_DATE,NO_ZERO_IN_DATE,NO_ENGINE_SUBSTITUTION"
server-id = 1
innodb_rollback_on_timeout=1
innodb_lock_wait_timeout=600
max_connections=350
log-bin=mysql-bin
binlog-format = 'ROW'
/cc @swill @jburwell @agneya2001 @wido @DaanHoogland and others
* pr/1517:
engine/schema: fix upgrade path to work with MySQL 5.7
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Snapshot removing implemented on RBD.
1. On management side: when created new shanpshot we checking if our primary storage is RBD,
then do not remove record from cloud.snapshot_store_ref with link to Ceph
image via 'install_path' field.
2. On management side: when removing snapshot, also send command to agent 'DeleteCommand'.
3. On agent side: method implemented 'public Answer deleteSnapshot(final DeleteCommand cmd)'
Found this issue when using MySQL 5.7 with Ubuntu 16.04 with following settings:
sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION,ERROR_FOR_DIVISION_BY_ZERO,NO_ZERO_DATE,NO_ZERO_IN_DATE,NO_ENGINE_SUBSTITUTION"
server-id = 1
innodb_rollback_on_timeout=1
innodb_lock_wait_timeout=600
max_connections=350
log-bin=mysql-bin
binlog-format = 'ROW'
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Updated most dependencies to latest minor releases, EXCEPT:
- Gson 2.x
- Major spring framework version
- Servlet version
- Embedded jetty version
- Mockito version (beta)
- Mysql lib minor version upgrade (breaks mysql-ha plugin)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag
RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
* pr/1200:
CLOUDSTACK-9130: Make RebootCommand similar to start/stop/migrate agent commands w.r.t. "execute in sequence" flag RebootCommand now behaves in the same way as start/stop/migrate agent commands w.r.t. to sequential/parallel execution.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9196: Fixing null pointer exception when vm meta data is synced on upgraded setuphttps://issues.apache.org/jira/browse/CLOUDSTACK-9196
NullPointerException can occur if XenServer reports non-existing VM in cloud DB.
* pr/1274:
CLOUDSTACK-9196: Fixing null pointer exception when vm meta data is synced on upgraded setup.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removed unused variables from "NetworkStateListener" classWe removed the following variables from "com.cloud.network.NetworkStateListener"
. UsageEventDao _usageEventDao
. NetworkDao _networkDao
We changed the EventBus s_eventBus variable to private, the constructor not to use those variables and applied this change in classes com.cloud.network.IpAddressManagerImpl and org.apache.cloudstack.engine.orchestration.NetworkOrchestrator
* pr/1261:
Removed unused variables from class NetworkStateListener
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fixed return type Void to void in DataMotionStrategy.The main changes are:
- Changing methods Void to void.
- Removal of the method Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback<CopyCommandResult> callback) that was
never used.
We noticed that methods form that class are using the return type Void
with capital V. This way that method has to return a null value at the
end.
Removed trim lines from XenServerStorageMotionStrategy.
The trim lines were removed from XenServerStorageMotionStrategy.
* pr/969:
Changed return of methods from DataMotionStrategy, Void to void
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9185: [VMware DRS] VM sync failed with exception due to out-of-band changesSummary: The target "ClusteredVirtualMachineManagerImpl.HandlePowerStateReport" invoked during the VM power state sync is not found as HandlePowerStateReport was not implemented in ClusteredVirtualMachineManagerImpl and was private in VirtualMachineManagerImpl, which was resulting in InvocationTargetException. Changed HandlePowerStateReport() in VirtualMachineManagerImpl to protected.
* pr/1256:
CLOUDSTACK-9185: [VMware DRS] VM sync failed with exception due to out-of-band changes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8860: improve error messages in VM deployment code path.improved the error messages in vm deployment code path. added some more data to the error messages and also fixed some errors using internal ids to use uuids.
* pr/864:
CLOUDSTACK-8860: improve error messages in VM deployment code path.
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9154 - Sets the pub interface down when all guest nets are gone
CLOUDSTACK-9187 - Makes code ready for more something like ethXXXX, if we ever get that far
CLOUDSTACK-9188 - Reads network GC interval and wait from configDao
CLOUDSTACK-9187 - Fixes interface allocation to VRRP instances
CLOUDSTACK-9187 - Adds test to cover multiple nics and nic removal
CLOUDSTACK-9154 - Adds test to cover nics state after GC
CLOUDSTACK-9154 - Returns the guest iterface that is marked as added
Conflicts:
engine/orchestration/src/org/apache/cloudstack/engine/orchestration/NetworkOrchestrator.java
[4.7] Critical VPCVR issues fixed: CLOUDSTACK-9154; CLOUDSTACK-9187; and CLOUDSTACK-9188This PR applies the same fixes as in the PR #1259, but against branch 4.7.
Please refer to PR #1259 for the tests results and all the comments already made there.
Issues fixed are:
* CLOUDSTACK-9154: rVPC doesn't recover from cleaning up of network garbage collector
* CLOUDSTACK-9187: rVPC routers in Master/Master due to concurrency problem when writing the keepalivd.conf
* CLOUDSTACK-9188: NetworkGarbageCollector is not using gc.interval and gc.wait from settings
Those changes have been covered by 2 new tests added to ```smoke/test_vpc_redundant.py```:
* test_04_rvpc_network_garbage_collector_nics
* test_05_rvpc_multi_tiers
The test ```test_04_rvpc_network_garbage_collector_nics``` depends on the global settings for the network.gc.interval and gc.wait. If one wants the test to run quicker, please change the settings (default is 600 seconds for each) and restart the Management Server before running the tests. I would suggest to set it to 60 seconds.
In addition, the NetworkGarbageCollector was redefining the settings above mentioned and not reading their values through ConfigDao. Due to that, the settings were not being applied properly and the test was waiting to long to check the VPC routers.
* pr/1277:
CLOUDSTACK-9154 - Sets the pub interface down when all guest nets are gone
CLOUDSTACK-9187 - Makes code ready for more something like ethXXXX, if we ever get that far
CLOUDSTACK-9188 - Reads network GC interval and wait from configDao
CLOUDSTACK-9187 - Fixes interface allocation to VRRP instances
CLOUDSTACK-9187 - Adds test to cover multiple nics and nic removal
CLOUDSTACK-9154 - Adds test to cover nics state after GC
CLOUDSTACK-9154 - Returns the guest iterface that is marked as added
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Implement CheckHealthCommand for NSX controllers
Fix log message that refers to agent, not host
Prevent NullPointerException when host does not belong to a pod
Add Health Check Command to NSX pluginThe NSX plugin does not support the HeathCheckCommand. Instead it fakes a PingCommand as a call tot he control cluster status API.
However, we have seen in production that the management server will sometimes find the NSX controller to be behind on ping and that will trigger a HealthCheckCommand which will return with an unsupported command answer.
Once this happens the controller is put into Alert state and will not recover until the management sever is restarted.
In addition, during the investigation, there will be a null pointer exception due tot he fact that the NSX controllers do not live in a pod.
This PR tries to address those two issues.
* pr/1293:
Implement CheckHealthCommand for NSX controllers
Fix log message that refers to agent, not host
Prevent NullPointerException when host does not belong to a pod
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
Fix unable to setup more than one Site2Site VPN Connection
FIX S2S VPN rVPC: Check only redundant routers in state MASTER
PEP8 of integration/smoke/test_vpc_vpn
Add S2S VPN test for Redundant VPC
Make integration/smoke/test_vpc_vpn Hypervisor independant
FIX VPN: non-working ipsec commands
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
CLOUDSTACK-9186: Root admin cannot see VPC created by Domain admin user
CLOUDSTACK-9192: UpdateVpnCustomerGateway is failing
CLOUDSTACK-6485 prevent ip asignment of private gw iface
CLOUDSTACK-9204 Do not error when staticroute is already gone
make both check lines consistent
CLOUDSTACK-9181 Prevent syntax error in checkrouter.sh
CLOUDSTACK-9202 Bump ssh timeout
[4.7] ADD Force UDP encapsulation option to Site2Site VPNThis PR adds the option to enable forced UDP encapsulation of ESP packets during a setup of a site2site vpn. This options enforces the 'forceencaps' option in the openswan ipsec config:
https://wiki.strongswan.org/projects/strongswan/wiki/ConnSection
* pr/1317:
[UI] MADNESS
[DB] Add force_encap field to s2s_customer_gateway table
[ROUTER] Add forceencaps field to python router ipsec config method
[TEST] unittest needs rework
[MARVIN] Add forceencap field to VpnCustomerGateway class in marvin base
[CORE] Add Force UDP Encapsulation option to Site2Site VPN
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.7:
CLOUDSTACK-9220 Sort list of domains on Domain tab in UI
Admin cannot see VMs on port forwarding page
Fix mariadb related listCapacity bug (CLOUDSTACK-8966)
CLOUDSTACK-9213 - Split the ACL rules using comma instead of dash.
CLOUDSTACK-9213 - Formatting the code
Summary: The target "ClusteredVirtualMachineManagerImpl.HandlePowerStateReport" invoked during the VM power state sync is not found as HandlePowerStateReport was not implemented in ClusteredVirtualMachineManagerImpl and was private in VirtualMachineManagerImpl, which was resulting in InvocationTargetException. Changed HandlePowerStateReport() in VirtualMachineManagerImpl to protected.
CLOUDSTACK-9134: set device_id as the first device_id not in use instead of nic count
when we restart vpc tiers, the old nics will be removed, and create a new nic.
however, the device_id was set to the nic count, which may be already used.
this commit get the first device_id not in use as the device_id of new nic.
This issue also happen when we add multiple networks to a vm and remove them.
* pr/1209:
CLOUDSTACK-9134: set device_id as the first device_id not in use instead of nic count
Signed-off-by: Daan Hoogland <daan@onecht.net>
when we restart vpc tiers, the old nics will be removed, and create a new nic.
however, the device_id was set to the nic count, which may be already used.
this commit get the first device_id not in use as the device_id of new nic.
This issue also happen when we add multiple networks to a vm and remove them.
Quota service while allowing for scalability will make sure that the cloud is
not exploited by attacks, careless use and program errors. To address this
problem, we propose to employ a quota-enforcement service that allows resource
usage within certain bounds as defined by policies and available quotas for
various entities. Quota service extends the functionality of usage server to
provide a measurement for the resources used by the accounts and domains using a
common unit referred to as cloud currency in this document. It can be configured
to ensure that your usage won’t exceed the budget allocated to accounts/domain
in cloud currency. It will let user know how much of the cloud resources he is
using. It will help the cloud admins, if they want, to ensure that a user does
not go beyond his allocated quota. Per usage cycle if a account is found to be
exceeding its quota then it is locked. Locking an account means that it will not
be able to initiat e a new resource allocation request, whether it is more
storage or an additional ip. Needless to say quota service as well as any action
on the account is configurable.
Changes from Github code review:
- Added marvin test for quota plugin API
- removed unused commented code
- debug messages in debug enabled check
- checks for nulls, fixed access to member variables and feature
- changes based on PR comments
- unit tests for UsageTypes
- unit tests for all Cmd classes
- unit tests for all service and manager impls
- try-catch-finally or try-with-resource in dao impls for failsafe db switching
- remove dead code
- add missing quota calculation case (regression fixed)
- replace tabs with spaces in pom.xmls
- quota: though default value for quota_calculated is 0, the usage server
makes it null while entering usage entries. Flipping the condition so
as to acocunt for that.
- quotatypes: fix NPE in quota type
- quota framework test fixes
- made statement period configurable
- changed default email templates to reflect the fact that exhausted quota may not result in a locked account
- added quotaUpdateCmd that refreshes quota balances and sends alerts and statements
- report quotaSummary command returns quota balance, quota usage and state for all account
- made UI framework changes to allow for text area input in edit views
- process usage entries that have greater than 0 usage
- orocess quota entries only if tariff is non zero
- if there are credit entries but no balance entry create a dummy balance entry
- remove any credit entries that are before the last balance entry
when displaying balance statement
- on a rerun the last balance is now getting added
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Quota+Service+-+FS
PR: https://github.com/apache/cloudstack/pull/768
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9105: Logging enhancement: Handle/reference to track API calls end to end in the MS logs
Added logid to logging framework, now all API call logs can be tracked with this id end to end
* pr/1167:
CLOUDSTACK-9105: Logging enhancement: Handle/reference to track API calls end to end in the MS logs Added logid to logging framework, now all API call logs can be tracked with this id end to end
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9047 rename enumsmake enums adhere to best practice naming conventions
* pr/1049:
CLOUDSTACK-9046 rename enums to adhere to naming conventions
CLOUDSTACK-9046 renamed enums in kvm plugin
CLOUDSTACK-9047 use 'State's only with context there are more types called 'State' (or to be called so but now 'state') So remove imports and prepend their enclosing class/context to them.
Signed-off-by: Daan Hoogland <daan@onecht.net>
CLOUDSTACK-9107: Description of global config agent.load.threshold and the actual behavior are not in sync
Made configuration parameter description and behavior in sync.
* pr/1172:
CLOUDSTACK-9107: Description of global config agent.load.threshold and the actual behavior are not in sync Made configuration parameter description and behavior in sync.
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9075 - Uses the same vlan since it should have been already released
CLOUDSTACK-9075 - Adds VPC static routes test
CLOUDSTACK-9075 - Covers Private GW ACL with Redundant VPCs
CLOUDSTACK-9075 - Add method to get list of Physical Networks per zone
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
CLOUDSTACK-6276 Fixing affinity groups for projectsWith some contributions from @resmo and @ustcweizhou.
This closes https://github.com/apache/cloudstack/pull/508
To test manually (need at least 2 hosts):
Create a project
Create an affinity group in that project
Deploy a vm with that affinity group
Deploy a second vm with that affinity group
They should be on different hosts
Ran old and new tests for affinity groups on the simulator
Test create affinity group as admin in project ... === TestName: test_01_admin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as domain admin for projects ... === TestName: test_02_doadmin_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group as user for projects ... === TestName: test_03_user_create_aff_grp_for_project | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) for projects ... === TestName: test_4_user_create_aff_grp_existing_name_for_project | Status : SUCCESS ===
ok
#Delete Affinity Group by id. ... === TestName: test_01_delete_aff_grp_by_id | Status : SUCCESS ===
ok
#Delete Affinity Group by id should fail for user not in project ... === TestName: test_02_delete_aff_grp_by_id_another_user | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_01_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups with more vms than hosts. ... === TestName: test_02_deploy_vm_anti_affinity_group_fail_on_not_enough_hosts | Status : SUCCESS ===
ok
List affinity group for a vm for projects ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm for projects ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id for projects ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name for projects ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id for projects ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name for projects ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group for projects ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 16 tests in 581.706s
OK
Deploy vm as Admin in Affinity Group belonging to regular user (should fail) ... === TestName: test_01_deploy_vm_another_user | Status : SUCCESS ===
ok
Create Affinity Group as admin for regular user ... === TestName: test_02_create_aff_grp_user | Status : SUCCESS ===
ok
List Affinity Groups as admin for all the users ... === TestName: test_03_list_aff_grp_all_users | Status : SUCCESS ===
ok
List Affinity Groups belonging to admin user ... === TestName: test_04_list_all_admin_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing account id and domain id ... === TestName: test_05_list_all_users_aff_grp | Status : SUCCESS ===
ok
List Affinity Groups belonging to regular user passing group id ... === TestName: test_06_list_all_users_aff_grp_by_id | Status : SUCCESS ===
ok
Delete Affinity Group belonging to regular user ... === TestName: test_07_delete_aff_grp_of_other_user | Status : SUCCESS ===
ok
Test create affinity group as admin ... === TestName: test_01_admin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as domain admin ... === TestName: test_02_doadmin_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group as user ... === TestName: test_03_user_create_aff_grp | Status : SUCCESS ===
ok
Test create affinity group that exists (same name) ... === TestName: test_04_user_create_aff_grp_existing_name | Status : SUCCESS ===
ok
Test create affinity group with existing name but within different account ... === TestName: test_05_create_aff_grp_same_name_diff_acc | Status : SUCCESS ===
ok
Test create affinity group of non-existing type ... === TestName: test_06_create_aff_grp_nonexisting_type | Status : SUCCESS ===
ok
Delete Affinity Group by name ... === TestName: test_01_delete_aff_grp_by_name | Status : SUCCESS ===
ok
Delete Affinity Group as admin for an account ... === TestName: test_02_delete_aff_grp_for_acc | Status : SUCCESS ===
ok
Delete Affinity Group which has vms in it ... === TestName: test_03_delete_aff_grp_with_vms | Status : SUCCESS ===
ok
Delete Affinity Group with id which does not belong to this user ... === TestName: test_05_delete_aff_grp_id | Status : SUCCESS ===
ok
Delete Affinity Group by name which does not belong to this user ... === TestName: test_06_delete_aff_grp_name | Status : SUCCESS ===
ok
Delete Affinity Group by id. ... === TestName: test_08_delete_aff_grp_by_id | Status : SUCCESS ===
ok
Root admin should be able to delete affinity group of other users ... === TestName: test_09_delete_aff_grp_root_admin | Status : SUCCESS ===
ok
Deploy VM without affinity group ... === TestName: test_01_deploy_vm_without_aff_grp | Status : SUCCESS ===
ok
Deploy VM by aff grp name ... === TestName: test_02_deploy_vm_by_aff_grp_name | Status : SUCCESS ===
ok
Deploy VM by aff grp id ... === TestName: test_03_deploy_vm_by_aff_grp_id | Status : SUCCESS ===
ok
test DeployVM in anti-affinity groups ... === TestName: test_04_deploy_vm_anti_affinity_group | Status : SUCCESS ===
ok
Deploy vms by affinity group id ... === TestName: test_05_deploy_vm_by_id | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by name ... === TestName: test_06_deploy_vm_aff_grp_of_other_user_by_name | Status : SUCCESS ===
ok
Deploy vm in affinity group of another user by id ... === TestName: test_07_deploy_vm_aff_grp_of_other_user_by_id | Status : SUCCESS ===
ok
Deploy vm in multiple affinity groups ... === TestName: test_08_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy multiple vms in multiple affinity groups ... === TestName: test_09_deploy_vm_multiple_aff_grps | Status : SUCCESS ===
ok
Deploy VM by aff grp name and id ... === TestName: test_10_deploy_vm_by_aff_grp_name_and_id | Status : SUCCESS ===
ok
List affinity group for a vm ... === TestName: test_01_list_aff_grps_for_vm | Status : SUCCESS ===
ok
List multiple affinity groups associated with a vm ... === TestName: test_02_list_multiple_aff_grps_for_vm | Status : SUCCESS ===
ok
List affinity groups by id ... === TestName: test_03_list_aff_grps_by_id | Status : SUCCESS ===
ok
List Affinity Groups by name ... === TestName: test_04_list_aff_grps_by_name | Status : SUCCESS ===
ok
List Affinity Groups by non-existing id ... === TestName: test_05_list_aff_grps_by_non_existing_id | Status : SUCCESS ===
ok
List Affinity Groups by non-existing name ... === TestName: test_06_list_aff_grps_by_non_existing_name | Status : SUCCESS ===
ok
List affinity group should list all for a vms associated with that group ... === TestName: test_07_list_all_vms_in_aff_grp | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupids ... === TestName: test_01_update_aff_grp_by_ids | Status : SUCCESS ===
ok
Update the list of affinityGroups by using affinity groupnames ... === TestName: test_02_update_aff_grp_by_names | Status : SUCCESS ===
ok
Update the list of affinityGroups for vm which is not associated ... === TestName: test_03_update_aff_grp_for_vm_with_no_aff_grp | Status : SUCCESS ===
ok
Update the list of Affinity Groups to empty list ... SKIP: Skip - Failing - work in progress
Update the list of Affinity Groups on running vm ... === TestName: test_05_update_aff_grp_on_running_vm | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 42 tests in 976.432s
OK (SKIP=1)
* pr/1134:
CLOUDSTACK-6276 Removing unused parameter in integration test for projects
CLOUDSTACK-6276 Removing unused parameter in integration test
CLOUDSTACK-6276 Fixing affinity groups for projects
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9022: move storage.cleanup related global configurations to StorageManager
CLOUDSTACK-9022: keep Destroyed volumes for sometime
Conflicts:
server/src/com/cloud/storage/StorageManagerImpl.java
Removed unused code from the EngineHostDao Implementation After analysing the code within the EngineHostDaoImpl class, we noticed that methods:
countBy;
findByGuid;
findAndUpdateDirectAgentToLoad;
findAndUpdateApplianceToLoad;
markHostsAsDisconnected;
listAllUpAndEnabledNonHAHosts;
findLostHosts;
getRunningHostCounts;
getNextSequence;
countRoutingHostsByDataCenter;
updateResourceState;
findByTypeNameAndZoneId;
findHypervisorHostInCluster;
lockOneRandomRow;
And variables:
status_logger;
state_logger;
Have no usage. Thus, in order to clean up the code, we decided to remove them from EngineHostDaoImpl and its interface (EngineHostDao).
All of EngineHostDaoImpl's attributes were set to private, given that they are not accessed by any other class.
* pr/942:
Removed unused code from the EngineHostDao Implementation.
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9020: UI enhancements from metrics view
CLOUDSTACK-9064: The users should be able to create multiple Guest Shared Networks in same Vlan ID, same Physical Network and same network, just with a different IP ranges.
CLOUDSTACK-9078: Gave scripts executable permissions.
CLOUDSTACK-9076: Changed ownership of directory /var/lib/cloudstack to cloud.
Cannot list vlanipranges by keyword
[4.7] CLOUDSTACK-8958: add dedicated ips to domain (account for now)For now, we dedicate ip pool to account, however, other accounts in the same domain cannot fetch the ip from this ip pool.
By dedicating ip pool to domain, accounts in the domain can fetch the public ip from same ip pool.
* pr/1007:
CLOUDSTACK-8958: throw an exception if project account cannot be found
CLOUDSTACK-8958: add dedicated ips to domain (account for now)
Signed-off-by: Remi Bergsma <github@remi.nl>
The main changes are:
• Changing methods “Void” to “void”.
• Removal of the method “Void copyAsync(DataObject srcData, DataObject
destData, AsyncCompletionCallback callback)” that was never used. We
noticed that methods form that class are using the return type Void with
capital V. This way that method has to return a null value at the end.
CLOUDSTACK-9062: Improve S3 implementation.The S3 implementation is far from finished, this commit focuses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimizations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
Please review thoroughly, both code inspection and (automated) integration tests. Currently no integration tests are available specifically for S3. Therefore the implementation is needed to be tested manually, for now...
What I tested:
- Greenfield install -> will download latest systemvm template automatically to S3.
- Upload a template/iso
- Download a template/iso
- Restart of management server -> list available templates -> doesn't download them again if available.
* pr/1083:
CLOUDSTACK-9062: Improve S3 implementation.
Signed-off-by: Remi Bergsma <github@remi.nl>
* 4.6:
CLOUDSTACK-9053 security upgrade as per COLLECTIONS-580
CLOUDSTACK-9055: fix NPE in updating Redundant State of VPC networks
CLOUDSTACK-9057 remove old system vm upgrade code
The S3 implementation is far from finished, this commit focusses on the bases.
- Upgrade AWS SDK to latest version.
- Rewrite S3 Template downloader.
- Rewrite S3Utils utility class.
- Improve addImageStoreS3 API command.
- Split various classes for convenience.
- Various minor improvements and code optimalisations.
A side effect of the new AWS SDK is that it, by default, uses the V4 signature. Therefore I added an option to specify the Signer, so it stays compatible with previous versions.
* 4.6:
more poms didn't get updated with script
implemented upgrade path from 4.6.0 to 4.6.1
checkstyle pom didn't get updated with script
debian: add 4.6.1-snapshot to changelog
Updating pom.xml version numbers for release 4.6.1-SNAPSHOT
Updating pom.xml version numbers for release 4.6.0
CLOUDSTACk-9002: VM deployment is successful even when dhcp entry command fails - Fixed
Reason: The return value of the call to accept() function in the applyRules() function of BasicNetworkTopology.java was not checked for success or failure. As a result even if it fails, exception was not thrown and VM deployment went ahead without any errors.
Fix: Added the necessary checks.
* pr/995:
CLOUDSTACk-9002: VM deployment is successful even when dhcp entry command fails - Fixed
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8825, CLOUDSTACK-8824 : Fixed issues if vm.allocation.algorithm is set to firstfitleastconsumedFixed following issues if vm.allocation.algorithm is set to firstfitleastconsumed
1. VM deployment failure if thre is only ZWPS in setup
2. VM migration is impossible from UI
To test
1. Create setup with ZWPS only
2. set vm.allocation.algorithm to firstfitleastconsumed in global settings
3. deploy virtual machine
observation: vm deployment will fail
After this fix it will pass
second scenario
1. Create Cloudstack Setup with two hosts (As it needs setup for migration)
2. Try migrating VM from UI
Observation: There will be error response in logs with nothing available in UI
After fix it will pass
Regarding BVT I am not sure whether there exists tests for firstfitleastconsumed vm allocation algorithm.
* pr/787:
CLOUDSTACK-8825, CLOUDSTACK-8824 : Fixed following issues if vm.allocation.algorithm is set to firstfitleastconsumed 1. VM deployment failure if thre is only ZWPS in setup 2. VM migration is impossible from UI
Signed-off-by: Remi Bergsma <github@remi.nl>
FIX: Ovm3 physical network traffic labels to work.The labeling was broken. Only labels assigned at zone creation
were used, changing labels was not working. Tested with changing
a label and checking it, labels at zone creation still works.
As a bonus fixed the consistency of KVM in Dutch compared to other
traffic labels in Dutch and copied in the OVM3 translated label
in other languages based on the other tarffic labels in those languages.
* pr/964:
FIX: Ovm3 physical network traffic labels to work.
Signed-off-by: Remi Bergsma <github@remi.nl>
CLOUDSTACK-8964: Can't create volume from snapshot of a removed volumeThis issue happens on KVM as well.
This is because the volume info is missing in the CopyCommand once the volume has been removed.
When the KVM agent tries to process the command, it will throws a NPE.
* pr/976:
CLOUDSTACK-8964: Can't create volume from snapshot of a removed volume
Signed-off-by: Remi Bergsma <github@remi.nl>
This issue happens on KVM as well.
This is because the volume info is missing in the CopyCommand once the volume has been removed.
When the KVM agent tries to process the command, it will throws a NPE.
The labeling was broken. Only labels assigned at zone creation
were used, changing labels was not working. Tested with changing
a label and checking it.
As a bonus fixed the consistency of KVM in Dutch compared to other
traffic labels in dutch and copied in the OVM3 translated label
in other languages.
There 2 things which has been changed.
* We look on power_state_update_time instead of update_time. Didn't make sense to me at all to look at update_time.
* Due DB update optimisation, powerState will only be updated if < MAX_CONSECUTIVE_SAME_STATE_UPDATE_COUNT. That is why we can not rely on these information unless we make sure these are up to date.
[4.6][BLOCKER]CLOUDSTACK-8763: Resolved POD/ZONE deletion failure.Instead of having both checkIfPodIsDeletable() and checkIfZoneIsDeletable have there own SQL query, I've refactored them so they use DAO SQL Queries.
This resolves the SQL Exception thrown by both classes.
Test to confirm working order:
- deploy ACS
- Add zones / pods. -> Try to delete without resources. -> Direct success.
- Add resources to zones / pods. -> Try to delete with resources in the pod / zone. -> Correct exception thrown. (Error message is why it cannot remove the zone / pod. IE: There is still a hosts or vm or .... )
* pr/845:
Added unit tests for checkIfPodIsDeletable() and checkIfZoneIsDeletable().
Updated Dao classes with correct field names.
Refactored checkIfZoneIsDeletable().
Added findByDc(long dcId) to VolumeDao and VolumeDaoImpl.
Added countIPs(long dcId, boolean onlyCountAllocated) to IPAddressDao and IPAddressDaoImpl.
Added countIPs(long dcId, boolean onlyCountAllocated) to DataCenterIpAddressDao and DataCenterIpAddressDaoImpl.
Refactored checkIfPodIsDeletable().
Added findByPodId(Long podId) to HostDao and HostDaoImpl.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
CLOUDSTACK-8851 Redundant VR getting started in the same cluster or hwe are not populating the deployment destination of the previous rvr in the avoid set of the rvr that is being created. This was resulting in both the rvrs getting deployed to same host sometimes even when it
could have gone to a different one.
Now we are updating the avoids set of the deployment plan to fix this issue.
* pr/839:
CLOUDSTACK-8851 Redundant VR getting started in the same cluster or host even when there are suitable hosts available
Signed-off-by: Remi Bergsma <github@remi.nl>
Cloudstack 8816 entityuuid missing in some of the eventsIn some of the events generated, entity uuid was missing making it difficult to find the entity. Fixed the same.
Tested it on rabbitmq instance.
There are the events before after the fix:
Before
--------------------------------------------------------------------------------
routing_key: management-server.ActionEvent.ACCOUNT-DELETE.Account.*
exchange: cloudstack-events
message_count: 2
payload:
{"eventDateTime":"2015-09-04 17:59:24 +0530","status":"Scheduled","description":"deleting User test4 (id: 28) and accountId \u003d 28","event":"ACCOUNT.DELETE","Account":"c09e2e81-8edc-4c27-b072-25005b522b63","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 304
payload_encoding: string
redelivered: False
--------------------------------------------------------------------------------
routing_key: management-server.AsyncJobEvent.complete.Account.*
exchange: cloudstack-events
message_count: 0
payload: {"cmdInfo":"{\"id\":\"9dd3abc2-3f8b-4852-aa60-a74b234acb13\",\"response\":\"json\",\"sessionkey\":\"5ig1ItP2_5v-mgY4cVJbJN5hw_w\",\"ctxDetails\":\"
{\\\"interface com.cloud.user.Account\\\":\\\"9dd3abc2-3f8b-4852-aa60-a74b234acb13\\\"}
\",\"cmdEventType\":\"ACCOUNT.DELETE\",\"expires\":\"2015-09-07T11:11:56+0000\",\"ctxUserId\":\"2\",\"signatureversion\":\"3\",\"httpmethod\":\"GET\",\"uuid\":\"9dd3abc2-3f8b-4852-aa60-a74b234acb13\",\"ctxAccountId\":\"2\",\"ctxStartEventId\":\"447\"}","instanceType":"Account","jobId":"5004989d-0cde-4922-8afa-66bf38b75ea7","status":"SUCCEEDED","processStatus":"0","commandEventType":"ACCOUNT.DELETE","resultCode":"0","command":"org.apache.cloudstack.api.command.admin.account.DeleteAccountCmd","jobResult":"org.apache.cloudstack.api.response.SuccessResponse/null/
{\"success\":true}
","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 914
payload_encoding: string
redelivered: False
--------------------------------------------------------------------------------
After
--------------------------------------------------------------------------------
routing_key: management-server.ActionEvent.ACCOUNT-DELETE.Account.e5e2db91-414d-484c-99d5-c4e265c14ad8
exchange: cloudstack-events
message_count: 13
payload: {"eventDateTime":"2015-09-07 17:32:26 +0530","status":"Completed","description":"Successfully completed deleting account. Account Id: 45","event":"ACCOUNT.DELETE","entityuuid":"e5e2db91-414d-484c-99d5-c4e265c14ad8","entity":"com.cloud.user.Account","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 344
payload_encoding: string
redelivered: True
--------------------------------------------------------------------------------
routing_key: management-server.AsyncJobEvent.complete.Account.e5e2db91-414d-484c-99d5-c4e265c14ad8
exchange: cloudstack-events
message_count: 12
payload: {"cmdInfo":"{\"id\":\"e5e2db91-414d-484c-99d5-c4e265c14ad8\",\"response\":\"json\",\"sessionkey\":\"8AJVbn8HIpg5LZ_VaVfSPs_QN2k\",\"ctxDetails\":\"{\\\"interface com.cloud.user.Account\\\":\\\"e5e2db91-414d-484c-99d5-c4e265c14ad8\\\"}\",\"cmdEventType\":\"ACCOUNT.DELETE\",\"expires\":\"2015-09-07T12:17:42+0000\",\"ctxUserId\":\"2\",\"signatureversion\":\"3\",\"httpmethod\":\"GET\",\"uuid\":\"e5e2db91-414d-484c-99d5-c4e265c14ad8\",\"ctxAccountId\":\"2\",\"ctxStartEventId\":\"465\"}","instanceType":"Account","instanceUuid":"e5e2db91-414d-484c-99d5-c4e265c14ad8","jobId":"0bb08486-6d9f-4e9f-bfef-b7463c42e71b","status":"SUCCEEDED","processStatus":"0","commandEventType":"ACCOUNT.DELETE","resultCode":"0","command":"org.apache.cloudstack.api.command.admin.account.DeleteAccountCmd","jobResult":"org.apache.cloudstack.api.response.SuccessResponse/null/{\"success\":true}","account":"bd73dc2e-35c0-11e5-b094-d4ae52cb9af0","user":"bd7ea748-35c0-11e5-b094-d4ae52cb9af0"}
payload_bytes: 968
payload_encoding: string
redelivered: True
--------------------------------------------------------------------------------
* pr/782:
CLOUDSTACK-8816 Systemvm reboot event doesnt have uuids. Fixed the same
CLOUDSTACK-8816: Project UUID is not showing for some of operations in RabbitMQ.
CLOUDSTACK-8816: entity uuid missing in create network event
CLOUDSTACK-8816: instance uuid is missing in events for delete account
CLOUDSTACK-8816 Fixed entityUuid missing in some cases is events
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
CLOUDSTACK-8822 - Replacing Runnable by CallableThat's the first part of the refactor, which will touch the ManagedContextRunnable and all its subclasses. However, in order to reduce impact, the first part comprises the Agent and Nio related classes (NioConnection, NioServer and NioClient).
* All the sub-classes were also updated according to the changes in the super-classes
* Improved exception handling
* There were also code formatting changes
Changes were structural and the NioTest covered them without need to modify the unit test.
This PR is quite extensive. Please, wait for the Test Report in order to proceed with further review.
ping @remibergsma @miguelaferreira @bhaisaab @karuturi @wido @DaanHoogland @borisroman @K0zka
Cheers,
Wilder
* pr/805:
CLOUDSTACK-8822 - Replacing Runnable by Callable in the Taks and NioConnection classes
Signed-off-by: wilderrodrigues <wrodrigues@schubergphilis.com>
Guys, can you review it? things need to be discussed:
(1) this supports KVM/QCOW2 only. Anyone want to implement for other Hypervisor/format ?
(2) The original data volume (on primary storage) will be removed.
(3) The script uses the default timeout in libvirtComputingResource. Do we need to add one in global configuration (like copy.volume.wait or backup.snapshot.wait, create.volume.from.snapshot.wait)
(4) In scripts/storage/qcow2/managesnapshot.sh, I use "qemu-img convert -f qcow2 -O qcow2" to copy the snapshot from secondary to primary (hence there is no base image file), instead of "cp -f", this is because convert is faster than cp in my testing.
* pr/732:
CLOUDSTACK-5863: revert volume snapshot for KVM/QCOW2
Signed-off-by: Wei Zhou <w.zhou@tech.leaseweb.com>
This reverts commit cd7218e241, reversing
changes made to f5a7395cc2.
Reason for Revert:
noredist build failed with the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.2:compile (default-compile) on project cloud-plugin-hypervisor-vmware: Compilation failure
[ERROR] /home/jenkins/acs/workspace/build-master-noredist/plugins/hypervisors/vmware/src/com/cloud/hypervisor/guru/VMwareGuru.java:[484,12] error: non-static variable logger cannot be referenced from a static context
[ERROR] -> [Help 1]
even the normal build is broken as reported by @koushik-das on dev list
http://markmail.org/message/nngimssuzkj5gpbz
CLOUDSTACK-8773 : NPE in CheckRouterTask, when a DomainRouter happens to be expunged at the same time
* pr/745:
CLOUDSTACK-8773 : NPE in CheckRouterTask, when a DomainRouter happens to be expunged at the same time
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
CLOUDSTACK-8754: VM migration triggered by dynamic scaling is failingThis is caused by serialization failure for VmWorkMigrateForScale object. Replaced DeployDestination member present in VmWorkMigrateForScale with serializable types.
Haven't added any unit test as couldn't find a clean way to do it. Simply adding a test to do (de)serialization won't help catch any new member addition to the type which breaks serializability.
* pr/725:
CLOUDSTACK-8754: VM migration triggered by dynamic scaling is failing This is caused by serialization failure for VmWorkMigrateForScale object. Replaced DeployDestination member present in VmWorkMigrateForScale with serializable types.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This patch makes it possible to expose VM UUID to subsystems, this can be
useful for implementing VM Snapshots for KVM in future.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fix for the NicVO.java regression.Renamed set*() methods to correct naming.
* pr/726:
Fix for the NicVO.java regression.
Signed-off-by: Remi Bergsma <github@remi.nl>
This is caused by serialization failure for VmWorkMigrateForScale object. Replaced DeployDestination member
present in VmWorkMigrateForScale with serializable types.
This reverts commit 180afe52e5.
This broke the build on master:
master build broken with the below error http://jenkins.buildacloud.org/job/build-master-slowbuild/2101/consoleText
```
[INFO] -------------------------------------------------------------
[ERROR] COMPILATION ERROR :
[INFO] -------------------------------------------------------------
[ERROR] /home/jenkins/acs/workspace/build-master-slowbuild/plugins/hypervisors/xenserver/test/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixRequestWrapperTest.java:[1581,51] error: constructor CreateVMSnapshotCommand in class CreateVMSnapshotCommand cannot be applied to given types;
[ERROR] required: String,String,VMSnapshotTO,List<VolumeObjectTO>,String
found: String,VMSnapshotTO,List<VolumeObjectTO>,String
reason: actual and formal argument lists differ in length
/home/jenkins/acs/workspace/build-master-slowbuild/plugins/hypervisors/xenserver/test/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixRequestWrapperTest.java:[1623,53] error: no suitable constructor found for RevertToVMSnapshotCommand(String,VMSnapshotTO,List<VolumeObjectTO>,String)
[INFO] 2 errors
[INFO] -------------------------------------------------------------
```
This was PR #717 towards 4.5
This patch makes it possible to expose VM UUID to subsystems, this can be
useful for implementing VM Snapshots for KVM in future.
This was PR #717 towards 4.5
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 0062ff2672)
Signed-off-by: Remi Bergsma <github@remi.nl>
Changed methodnames according to Nic.java refactor.
Fixed NicVO.java due to regression from Nic.java refactor.
Fixed VmWareGuru.java after Nic.java refactor.
See issue CLOUDSTACK-8736 for ongoing effort to clean up network code.
Cloudstack 8656: do away with more silently ignoring exceptions.a lot of messages added.
some restructuring for test exception assertions and try-with-resource blocks
* pr/654: (29 commits)
CLOUDSTACK-8656: more logging instead of sysout
CLOUDSTACK-8656: use catch block for validation
CLOUDSTACK-8656: class in json specified not found
CLOUDSTACK-8656: removed unused classes
CLOUDSTACK-8656: restructure of tests
CLOUDSTACK-8656: reorganise sychronized block
CLOUDSTACK-8656: restructure tests to ensure exception throwing
CLOUDSTACK-8656: validate the throwing of ServerApiException
CLOUDSTACK-8656: logging ignored exceptions
CLOUDSTACK-8656: try-w-r removes need for empty catch block
CLOUDSTACK-8656: try-w-r instead of clunckey close-except
CLOUDSTACK-8656: deal with empty SQLException catch block by try-w-r
CLOUDSTACK-8656: unnecessary close construct removed
CLOUDSTACK-8656: message about timed buffer logging
CLOUDSTACK-8656: message about invalid number from store
CLOUDSTACK-8656: move cli test tool to separate file
CLOUDSTACK-8656: exception is the rule for some tests
CLOUDSTACK-8656: network related exception logging
CLOUDSTACK-8656: reporting ignored exceptions in server
CLOUDSTACK-8656: log in case we are on a platform not supporting UTF8
...
Signed-off-by: Remi Bergsma <github@remi.nl>
* pr/547:
CLOUDSTACK-8601. VMFS storage added as local storage can be re-added as shared storage. Fail addition of a VMFS shared storage pool in case it has already been added as local storage in CS.
Signed-off-by: Mike Tutkowski <mike.tutkowski@solidfire.com>
* pr/649:
CLOUDSTACK-8656: checkstyle no longer used import removed
CLOUDSTACK-8656: messages on SQL exception in DbUtils!
CLOUDSTACK-8656: replace empty catch block on close by try-with-resource
CLOUDSTACK-8656: 30x legacy upgrade code exception messages
CLOUDSTACK-8656: removed redundant implements
CLOUDSTACK-8656: silent close failure of clustering socket log as info
CLOUDSTACK-8656: try with resource te eliminate empty catch clauses
CLOUDSTACK-8656: log messages on exception in legacy sql upgrade code
CLOUDSTACK-8656: removed unused input stream there was code to close a stream that was never created
CLOUDSTACK-8656: info on error closing peering channels
CLOUDSTACK-8656: messages on errors closing streams for local templates
CLOUDSTACK-8656: handle template properties loading
Signed-off-by: Daan Hoogland <daan@onecht.net>
* pr/603:
coverity: try-with-resource and restructure in upgrade datacenter
extra try-w-r
coverity issues in old upgrade code
Signed-off-by: Daan Hoogland <daan@onecht.net>
* pr/604:
coverity 1116563: resource count leak for accounts
coverity 1116562: resource count resource leak
coverity 1116612: update network cidrs firewall rules and acls
coverity 1116610: upgrade cluster overprovisioning details
coverity 1212194: reuse of prepared statements in try-block and of course have them autoclosed
coverity 1225199: vmware dc upgrade
coverity 1288575: replace all close with try-with-resource not strictly necessary in all but one case. done consequently.
Signed-off-by: Daan Hoogland <daan@onecht.net>
Instead of putting the host to Alert state immediately, the investigators should be allowed to run for some time based on alert.wait global config.
At the end of this interval if the host state still cannot be determined then put the host in Alert. Also updated some of the log messages.
This closes#621
As part of volume sync, that runs during of SSVM start-up, the volume_store_ref entry was getting deleted. Volume GC relies on this entry to move volume to destroyed state.
Since the entry was getting deleted, GC thread never moved the volume from UploadError/UploadAbandoned to Destroyed. Fix is to not remove the volume_store_ref entry as part
of volume sync and let GC thread handle the clean up.
This closes#611
If SSVM cannot be started then the existing entry is removed and a new SSVM gets created. Made similar changes for CPVM as well.
Also cleaned up some log messages in SSVM and CPVM manager code.
VM sync. generates a lot of queries on vm_instance table with 'instance_name' as filter. Since the field is not
indexed, these kind of queries will impact DB performance. Added an index for instance_name field.
This closes#553
* Move config options to SAML plugin
This moves all configuration options from Config.java to SAML auth manager. This
allows us to use the config framework.
* Make SAML2UserAuthenticator validate SAML token in httprequest
* Make logout API use ConfigKeys defined in saml auth manager
* Before doing SAML auth, cleanup local states and cookies
* Fix configurations in 4.5.1 to 4.5.2 upgrade path
* Fail if idp has no sso URL defined
* Add a default set of SAML SP cert for testing purposes
Now to enable and use saml, one needs to do a deploydb-saml after doing a deploydb
* UI remembers login selections, IDP server
- CLOUDSTACK-8458:
* On UI show dropdown list of discovered IdPs
* Support SAML Federation, where there may be more than one IdP
- New datastructure to hold metadata of SP or IdP
- Recursive processing of IdP metadata
- Fix login/logout APIs to get new interface and metadata data structure
- Add org/contact information to metadata
- Add new API: listIdps that returns list of all discovered IdPs
- Refactor and cleanup code and tests
- CLOUDSTACK-8459:
* Add HTTP-POST binding to SP metadata
* Authn requests must use either HTTP POST/Artifact binding
- CLOUDSTACK-8461:
* Use unspecified x509 cert as a fallback encryption/signing key
In case a IDP's metadata does not clearly say if their certificates need to be
used as signing or encryption and we don't find that, fallback to use the
unspecified key itself.
- CLOUDSTACK-8462:
* SAML Auth plugin should not do authorization
This removes logic to create user if they don't exist. This strictly now
assumes that users have been already created/imported/authorized by admins.
As per SAML v2.0 spec section 4.1.2, the SP provider should create authn requests using
either HTTP POST or HTTP Artifact binding to transfer the message through a
user agent (browser in our case). The use of HTTP Redirect was one of the reasons
why this plugin failed to work for some IdP servers that enforce this.
* Add new User Source
By reusing the source field, we can find if a user has been SAML enabled or not.
The limitation is that, once say a user is imported by LDAP and then SAML
enabled - they won't be able to use LDAP for authentication
* UI should allow users to pass in domain they want to log into, though it is
optional and needed only when a user has accounts across domains with same
username and authorized IDP server
* SAML users need to be authorized before they can authenticate
- New column entity to track saml entity id for a user
- Reusing source column to check if user is saml enabled or not
- Add new source types, saml2 and saml2disabled
- New table saml_token to solve the issue of multiple users across domains and
to enforce security by tracking authn token and checking the samlresponse for
the tokens
- Implement API: authorizeSamlSso to enable/disable saml authentication for a
user
- Stubs to implement saml token flushing/expiry
- CLOUDSTACK-8463:
* Use username attribute specified in global setting
Use username attribute defined by admin from a global setting
In case of encrypted assertion/attributes:
- Decrypt them
- Check signature if provided to check authenticity of message using IdP's
public key and SP's private key
- Loop through attributes to find the username
- CLOUDSTACK-8538:
* Add new global config for SAML request sig algorithm
- CLOUDSTACK-8539:
* Add metadata refresh timer task and token expiring
- Fix domain path and save it to saml_tokens
- Expire hour old saml tokens
- Refresh metadata based on timer task
- Fix unit tests
This closes#489
(cherry picked from commit 20ce346f3a)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
client/WEB-INF/classes/resources/messages_hu.properties
plugins/hypervisors/xenserver/src/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixCheckHealthCommandWrapper.java
plugins/user-authenticators/saml2/src/org/apache/cloudstack/api/command/SAML2LoginAPIAuthenticatorCmd.java
ui/scripts/ui-custom/login.js
- New implementation uses nanoseconds. Due to that, the places where the Profiler is used as a Monitor and/or
a stopwatch will suffer with the difference in the return
- Also added a getDuration(), which returns the time in nanoseconds in case someone wants to use it instead
- Added an extra test to check if the getDuration() works fine with nanoseconds
- Fixed the test that checks the time in milliseconds: I added an error margin to cover the test better
Signed-off-by: Daan Hoogland <daan@onecht.net>
The volume is already deleted (may be by the cleanup thread) and hence
the NPE. Added a not null check for the volumevo and returning false
from the state transition
This closes#321
/+= may break on some environments, url safe encoded passwords will have -_,
characters which are more acceptable
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 19cc5eb9e6)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
... of new volumes. Following changes are implemented 1. Disable or enable a pool with the
updateStoragePool api. A new 'enabled' parameter added for the same. 2. When a
pool is disabled the state of the pool is updated to 'Disabled' in the db. On
enabling it is updated back to 'Up'. Alert is raised when a pool is disabled or
enabled. 3. Updated other storage providers to also honour the disabled state.
4. A disabled pool is skipped by allocators for provisioing of new volumes. 5.
Since the allocators skip a disabled pool for provisioning of volumes, the
volumes are also not listed as a destination for volume migration.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Disabling+Storage+Pool+for+Provisioning
This closes#257
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Removes awsapi db properties usage across codebase
- Removes references from spring xmls, test cases and TransactionLegacy
- Adds sql command to drop database cloudbridge in schema-451to460-cleanup.sql
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMs in transition states - Starting, Stopping, Migrating - are also taken into account for enforcing "max. guest limit"
(cherry picked from commit 3100fc1554)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
During cold volume migration we are duplicating volume entry in volumes table.
When migration is complete, we update the uuid of new entry and expunge the older entry.
This results in removal of resource tags on volume as its resource id still pointing to older volume.
As part of fix while updating uuid for volume, we are updating resource_id for tags also.
This closes#194
Correctly update the status of an uploaded volume upon failure to attach it to a VM.
(cherry picked from commit 10a106f5d8)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
During ping task, while scanning and updating status of all VMs on the host that are stuck in a transitional state
and are missing from the power report, do so only for VMs that are not removed.
(cherry picked from commit de7173a0ed)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
During ping task, while scanning and updating status of all VMs on the host that are stuck in a transitional state
and are missing from the power report, do so only for VMs that are not removed.
inconsistent state (NotUploaded or UploadInProgress) and doesn't transition to any terminal
state (Uploaded, Uploaded). As a result these volumes/templates cannot be removed. Fix is to handle such
volume/template entries correctly.
Set destination volume path as NULL while duplicating volume during migration.
If migration fails, destination volume will be marked as removed. And if migration succeeds, volume path will be rightly updated.
(cherry picked from commit d30d5644bb)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
1. provide compatibility with the Big Cloud Fabric (BCF) controller
L2 Connectivity Service in both VPC and non-VPC modes
2. virtual network terminology updates: VNS --> BCF_SEGMENT
3. uses HTTPS with trust-always certificate handling
4. topology sync support with BCF controller
5. support multiple (two) BCF controllers with HA
6. support VM migration
7. support Firewall, Static NAT, and Source NAT with NAT enabled option
8. add VifDriver for Indigo Virtual Switch (IVS)
This closes#151
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- With the changes added by the rVPC work, the bump priority became deprecated.
This commit includes a refactor to get it removed from the following resources:
* Java classes
* domain_router table - removing the is_priority_bumpup column
* Fixing unit tests
All changes were tested with:
XenServer 6.2 running under our VMWare zone
CloudStack Management Server running on MacBook Pro
MySql running on MackBook Pro
Storage Type: Local
The copy command reply can have null size returned, so check and set values
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 53ca0b1861)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fixing assign IPv4 on GuestNetworkGuru.java
Fixing getRouters() on VpcVirtualRouterElement.java
Fixing Fixing paths on keepalived.conf.templ
Refactor on the other files
* removed the "is redundant" flag form the addVpcRouterToGuestNetwork() method
* removed the "is redundant" flag from the removeVpcRouterFromGuestNetwork() method
* changed the path of the master.py file in the keepalived.conf.temp file
* the call to routerDao.addRouterToGuestNetwork() in the VpcRouterDeploymentDefinition is not needed. That step will be performed once a VM is created
- In addition, when restarting a VPC the routers will have the guest net configured, if any exists.
* Pushing the POM.xml as well, to use the old Jetty for now. Could not fix the logging problem. Will replace the POM with master version after VPC is done.
Added a source column to the user table.
Source now has only two values UNKNOWN,LDAP with UNKNOWN being the
default and is an enum is com.cloud.User.
When the source is UNKNOWN, the old method of authenticating against all
the available authenticators is used. If a source is available, only
that particular authenticator will be used.
added overloaded methods in AccountService to createUserAccount and
createUser with source specified.
(cherry picked from commit 5da733072e)
Added a source column to the user table.
Source now has only two values UNKNOWN,LDAP with UNKNOWN being the
default and is an enum is com.cloud.User.
When the source is UNKNOWN, the old method of authenticating against all
the available authenticators is used. If a source is available, only
that particular authenticator will be used.
added overloaded methods in AccountService to createUserAccount and
createUser with source specified.
Set destination volume path as NULL while duplicating volume during migration.
If migration fails, destination volume will be marked as removed. And if migration succeeds, volume path will be rightly updated.
This is a plugin that puts in ovm3 support ranging from 3.3.1 to 3.3.2. Basic
functionality is in here, advanced networking etc..
Snapshots only work when a VM is stopped now due to the semantics of OVM's raw
image implementation (so snapshots should work on a storage level underneath the
hypervisor shrug)
This closes#113
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
check and update only when required
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit b879916f5c)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- insecure authenticators excluded in configuration
- snapshot response should have zone
- remove vmsnapshots when removing accounts
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Design Document:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Allow+VM+listing+by+User+ID
- Adds column to VMInstance DAO
- Adds column in vm_instance table
- Adds column in the UserVMJoinVO
- Adds default admin user which has UID = 2
- Adds migration path that sets user_id to first user of the accountId that
owns the vm in vm_instance table
- Add arg on list VMs API to query by userId, add support in query layer
- Refactor VMInstanceVO and child classes to accept userId
- Add code to let service layer pass userId if loggedIn user belongs to same
account as the owner executing an API call or use first user from owner account
- In case of CPVM and SSVM use system user ID
- Fix unit tests and spring injections
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fixed on 4.4 and master but not on 4.5, cherry-picked on 4.5 using commit
fbafc957dc
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
engine/orchestration/src/com/cloud/agent/manager/DirectAgentAttache.java
Update volume chain_info to NULL during cold migration.
Otherwise during VM start, CCP will configure and try to power-on the VM with wrong disk information.
(cherry picked from commit 7b32b8a268)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
pool, the source and destination pools cannot be local and cluster/zone and vice versa.
Cloudstack detects it and throws a exception. However, the end user only sees an
unexpected exception and not the reason for failure. Fixed it by making sure the
reason for the failure is correctly captured and shown to the end user.
(cherry picked from commit cffae8eef0)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
server/src/com/cloud/storage/VolumeApiServiceImpl.java
During VM creation, if vm.instancename.flag is set to true and hypervisor type is VMware, check if VM with the same hostname already exists in the zone.
(cherry picked from commit 5f9e4fddf3)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When migration fails instead of returning NULL, throw the exception.
(cherry picked from commit a5a65c7b55)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If VM has been cold migrated across different VMware DCs, then unregister the VM from source host.
(cherry picked from commit 15b348632d)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Before registering a VM check if a different CS VM with same name exists in vCenter.
(cherry picked from commit 33179cce56)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Fixed the following:
- Destroying volume in 'UploadAbandoned' state resulted in NPE
- Existing upload volume functionality interfered with this, added proper checks to prevent that
Call removeRawUsageRecords with interval (> 0) and it will clean up cloud_usage
table by removing records older than interval no. of days from today (current date)
and in case it runs when the job exec time is near, it will fail alerting
user to try again after a 15 min window.
There is an issue with async job scheduler, if this API were async it tries
to search and remove job from cloud_usage.async_job table and fails which is
why this API is sync and extends BaseCmd.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Separate global config to enable/disable Storage Migration during normal deployment
Introduced a configuration parameter named enable.storage.migration
(cherry picked from commit c55bc0b2d1)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
While taking a snapshot of a volume, CS chooses the endpoint to perform backup snapshot operation by selecting any host that has the storage containing the volume mounted on it.
Instead, if the volume is attached to a VM, the endpoint chosen by CS should be the host that contains the VM.
(cherry picked from commit a75a431373)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
When we download volume then we create entry in volume_store_ref table.
We mark the volume entry to ready state once download_url gets generated.
When we migrate that volume, then again one more entry is created with same volume id.
Its state is marked as allocated. Later we try to list only one dataobject in datastore
for state transition during volume migration. If the listed volume's state is allocated
then migration passes otherwise it fails.
Below fix will remove the randomness and give priority to volume entry which is made for
migration (download_url/extracturl will be null in case of migration). Giving priority to
download volume case is not needed as there will be only one entry in that case so no randomness.
Update volume chain_info to NULL during cold migration.
Otherwise during VM start, CCP will configure and try to power-on the VM with wrong disk information.
During VM creation, if vm.instancename.flag is set to true and hypervisor type is VMware, check if VM with the same hostname already exists in the zone.
While taking a snapshot of a volume, CS chooses the endpoint to perform backup snapshot operation by selecting any host that has the storage containing the volume mounted on it.
Instead, if the volume is attached to a VM, the endpoint chosen by CS should be the host that contains the VM.
During vmsync if StopCommand (issued as part of PowerOff/PowerMissing report) fails to stop VM (since VM is running on HV),
don't transition VM state to "Stopped" in CS db. Also added a check to throw ConcurrentOperationException if vm state is not
"Running" after start operation.
During vmsync if StopCommand (issued as part of PowerOff/PowerMissing report) fails to stop VM (since VM is running on HV),
don't transition VM state to "Stopped" in CS db. Also added a check to throw ConcurrentOperationException if vm state is not
"Running" after start operation.
on calling GetUploadParamsForVolume, persisting the metadata to db
validating the account limits and incrementing the appropriate limits
encoded the metadata on management server using preshared key
Changes:
- This is a race condition between the deleteDomain thread and AccountChecker thread. DeleteDomain thread marks the domain as inactive and proceeds for cleanup, AccountChecker thread that runs at the same time cleans up any domains marked as inactive.
- When the DeleteDomain thread finds that domain is already removed, it need not error out since the domain deletion has already happened
Changes:
- When there is HA we try to redeploy the affected vm using regular planners and if that fails we retry using the special planner for HA (which skips checking disable threshold)
Now because of job framework the InsufficientCapacittyException gets masked and the special planners are not called. Job framework needs to be fixed to rethrow the correct exception.
- Also the VM Work Job framework is not setting the DeploymentPlanner to the VmWorkJob. So the HA Planner being passed by HAMgr was not getting used.
- Now the job framework sets the planner passed in by any caller of the VM Start operation, to the job
Changes:
- When there is HA we try to redeploy the affected vm using regular planners and if that fails we retry using the special planner for HA (which skips checking disable threshold)
Now because of job framework the InsufficientCapacittyException gets masked and the special planners are not called. Job framework needs to be fixed to rethrow the correct exception.
- Also the VM Work Job framework is not setting the DeploymentPlanner to the VmWorkJob. So the HA Planner being passed by HAMgr was not getting used.
- Now the job framework sets the planner passed in by any caller of the VM Start operation, to the job
Changes:
- This is a race condition between the deleteDomain thread and AccountChecker thread. DeleteDomain thread marks the domain as inactive and proceeds for cleanup, AccountChecker thread that runs at the same time cleans up any domains marked as inactive.
- When the DeleteDomain thread finds that domain is already removed, it need not error out since the domain deletion has already happened
Upgrade fails if value is set using plain text encoding, the value needs to
be encrypted (if a key was provided during db was setup).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 6321a29e43)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Upgrade fails if value is set using plain text encoding, the value needs to
be encrypted (if a key was provided during db was setup).
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On default iptables rules are updated to add ACCEPT egress traffic.
If the network egress default policy is false, CS remove ACCEPT and adds the DROP rule which
is egress default rule when there are no other egress rules.
If the CS network egress default policy is true, CS won't configure any default rule for egress because
router already came up to accept egress traffic. If there are already egress rules for network then the
egress rules get applied on VR.
For isolated network with out firewall service, VR default allows egress traffic (guestnetwork --> public network)
On default iptables rules are updated to add ACCEPT egress traffic.
If the network egress default policy is false, CS remove ACCEPT and adds the DROP rule which
is egress default rule when there are no other egress rules.
If the CS network egress default policy is true, CS won't configure any default rule for egress because
router already came up to accept egress traffic. If there are already egress rules for network then the
egress rules get applied on VR.
For isolated network with out firewall service, VR default allows egress traffic (guestnetwork --> public network)
Changes;
- Upgrades maven-war plugin to 4.5 (faster war packaging)
- Upgrade spring framework to latest minor release
- Upgrade ehcache, jasypt, httpclient, httpcore and other core dependencies
- Upgrade to latest ipv6 library, fix unit test NetUtilsTest
- httpcore and httpclient are sharing same version variable
- commons-httpclient is different that httpclient, the fix gives it a separate var
- Apidocs failed to generate and get stuck with new reflections version, for now
we will continue using 0.9.8
Newer dependencies can be listed using:
mvn versions:display-dependency-updates -Dnoredist -Dsimulator -P developer,systemvm
Testing;
- Tested using Maven 3.2.1
- Local noredist build with unit tests succeeds
- CloudStack mgmt server started, basic business layer tests work
- Observed 10-15% build time improvement using new maven-war plugin
Branch: bugfix/4.5-8011 (commits are squashed in favour of a linear history)
Pull request:
https://github.com/apache/cloudstack/pull/50
This closes#50
TravisCI build summary:
https://travis-ci.org/shapeblue/cloudstack/builds/42902172
- Build passes with unit tests
- Apidocs generates successfully
- Most integration tests pass, some fail due to timeout errors, second re-run
passes some of them
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit fac7bfc5d5)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
pom.xml
Changes;
- Upgrades maven-war plugin to 4.5 (faster war packaging)
- Upgrade spring framework to latest minor release
- Upgrade ehcache, jasypt, httpclient, httpcore and other core dependencies
- Upgrade to latest ipv6 library, fix unit test NetUtilsTest
- httpcore and httpclient are sharing same version variable
- commons-httpclient is different that httpclient, the fix gives it a separate var
- Apidocs failed to generate and get stuck with new reflections version, for now
we will continue using 0.9.8
Newer dependencies can be listed using:
mvn versions:display-dependency-updates -Dnoredist -Dsimulator -P developer,systemvm
Testing;
- Tested using Maven 3.2.1
- Local noredist build with unit tests succeeds
- CloudStack mgmt server started, basic business layer tests work
- Observed 10-15% build time improvement using new maven-war plugin
Branch: bugfix/4.5-8011 (commits are squashed in favour of a linear history)
Pull request:
https://github.com/apache/cloudstack/pull/50
This closes#50
TravisCI build summary:
https://travis-ci.org/shapeblue/cloudstack/builds/42902172
- Build passes with unit tests
- Apidocs generates successfully
- Most integration tests pass, some fail due to timeout errors, second re-run
passes some of them
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
remove 441to450 ddl
(cherry picked from commit 5578616143)
(cherry picked from commit f18d6238b0)
Conflicts:
engine/schema/src/com/cloud/upgrade/DatabaseUpgradeChecker.java
schema: Add upgrade paths from 4.3.2 to 4.4.0
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
(cherry picked from commit 73c62837b5)
Conflicts:
engine/schema/src/com/cloud/upgrade/DatabaseUpgradeChecker.java
engine/schema/src/com/cloud/upgrade/dao/Upgrade441to450.java
setup/db/db/schema-441to450.sql
merged new work from schema-441to450.sql into schema-442to450.sql
root cause:
when vmsync reports system VM is down, CCP doesn't release the VM resource before starting it.
fix:
make sure cleanup is called for a VM when it is reported as Stopped
root cause:
when vmsync reports system VM is down, CCP doesn't release the VM resource before starting it.
fix:
make sure cleanup is called for a VM when it is reported as Stopped
pool, the source and destination pools cannot be local and cluster/zone and vice versa.
Cloudstack detects it and throws a exception. However, the end user only sees an
unexpected exception and not the reason for failure. Fixed it by making sure the
reason for the failure is correctly captured and shown to the end user.
Revert "CLOUDSTACK-7073: Added domainId field to the user table in order to restrict duplicated users creation on the db level"
This reverts commit 5a96d8ef5c.
Conflicts:
setup/db/db/schema-440to450.sql
Revert "CLOUDSTACK-7073: Added domainId field to the user table in order to restrict duplicated users creation on the db level"
This reverts commit 5a96d8ef5c.
Conflicts:
setup/db/db/schema-440to450.sql
Rajani Karuturi
Nitesh Sarda
Pavan Kumar Aravapalli
Rohit Yadav
Bharat Kumar
Anshul Gangwar
Jayapal
subhash_y
Nitin Kumar Maharana
Mike Tutkowski
Rajani Karuturi
Sudhansu
Likitha Shetty
Daan Hoogland
Sudhansu
Daan Hoogland
Kishan Kavala
Wei Zhou
nvazquez
Anshul Gangwar
Harikrishna Patnala
Priyank Parihar
SudharmaJain
nvazquez
Sudharma Jain
Marc-Aurèle Brothier
Nathan Johnson
Wido den Hollander
Koushik Das
Jayapalu
Abhinandan Prateek
Patrick Dube
Frank Maximus
rashmidixit
Syed
Nick Livens
subhash yedugundla
Eric Waegeman
Nemo
John Burwell
Abhinandan Prateek
Will Stevens
Aaron Hurt
Dmytro Shevchenko
weingartner
Remi Bergsma
Nitin Kumar Maharana
Michael Andersen
Anton Opgenoort
Miguel Ferreira
Wilder Rodrigues
pedro-martins
Suresh Kumar Anaparti
cirstofolini
Boris Schrijver
Rajani Karuturi
Kshitij Kansal
Funs Kessen
Rene Moser
Sanjay Tripathi
radu-stefanache
Daan Hoogland
Hiroki Ohashi
Rafael da Fonseca
Rajani Karuturi
Milamber
Devdeep Singh
Santhosh Edukulla
MS
KC Wang
Daan Hoogland
Antonio Fornie
Nitin Mehta
Funs
Hugo Trippaers
Damodar
Harikrishna Patnala
Saksham Srivastava
Min Chen
Prachi Damle
Loic Lambiel
Laszlo Hornyak
Anthony Xu
Edison Su
