Though VMware does not support security groups, but in a basic zone with VMware and no isolation VMs should be able to deploy.
Root cause:
In case of VMware and basic zone control nic is set to 0.0.0.0 assuming control network will be shared with guest network.
But to have access to VMware instances management/private needs to be assigned to it.
Solution:
Assing a private ip even in case of basic zone VMware.
The listZonesMetrics does not return same keys are listZones as the
default response view is restricted. This fixes that by ensuring that
for root admin full response view is used.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Validate API IOPS normal and maximum read/write values.
Ensures that normal read/write cannot be greater than Maximum
read/write. Additionally, it was added a global settings
'iops.maximum.rate.length'.
'iops.maximum.rate.length' sets the maximum IOPS read/write length
(seconds) accepted; thus, preventing irrealistic values for a disk
offering (e.g. hours or days of burst IOPS). The default value is 0
(zero) and allows any IOPS maximum rate length. Example:
iops.maximum.rate.length = 3600 sets the maximum IOPS length
accepted for a disk offering as 3600 seconds (60 minutes).
* Fix log String.format message from %s to %d
* Add bytes rate validation
* Refactoring to cover Read/Write Bytes and IOPS length validation
* Fix "copy-paste" issue with bytes write rate max length
Change Response view to Full for Admin user
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Remove constraint for NFS storage
* Add new property on agent.properties
* Add free disk space on the host prior template download
* Add unit tests for the free space check
* Fix free space check - retrieve avaiable size in bytes
* Update default location for direct download
* Improve the method to retrieve hosts to retry on depending on the destination pool type and scope
* Verify location for temporary download exists before checking free space
* In progress - refactor and extension
* Refactor and fix
* Last fixes and marvin tests
* Remove unused test file
* Improve logging
* Change default path for direct download
* Fix upload certificate
* Fix ISO failure after retry
* Fix metalink filename mismatch error
* Fix iso direct download
* Fix for direct download ISOs on local storage and shared mount point
* Last fix iso
* Fix VM migration with ISO
* Refactor volume migration to remove secondary storage intermediate
* Fix simulator issue
As previously described by PR #3929:
If vm has attached ISO, the migration fails with error message "org.libvirt.LibvirtException: Cannot access storage file /mnt/b33e5a1d-e4ea-3465-b6ac-c98dc8ff8af0/207-2-cc5fd717-2d57-3bb3-bcf6-2c930268db6c.iso"
* Userdata to display static NAT as public ip instead of VR ip
If static nat is enabled on VM then metadata service should return
the static nat instead of gateway IP.
If static not is not enabled then it should return the gateway IP
as the public IP
Test results:
Step to reproduce:
1. Create a vm
2. Ssh to vm.
3. Run the below command inside the vm
wget http://<VR public ip>/latest/meta-data/public-ipv4
Note down the output of the above command
4. Now acquire a new public and enable static NAT on that IP to this vm
5. Now run the same command mentioned above in the VM
This should display the static NAT ip instead of VR public IP
Output:
Before enabling static nat
wget http://10.10.10.40/latest/meta-data/public-ipv4
$ cat public-ipv4
10.10.10.29
After enabling static nat
wget http://10.10.10.40/latest/meta-data/public-ipv4
$ cat public-ipv4
10.11.10.30
* server: apply vm user data when release a public ip
Co-authored-by: Wei Zhou <ustcweizhou@gmail.com>
Nicolas Vazquez
Andrija Panic
Rohit Yadav
Wei Zhou
Spaceman1984
Daan Hoogland
Daan Hoogland
harikrishna-patnala
pavanaravapalli
Arthur Halet
Bitworks LLC
Gabriel Beims Bräscher
Paul Angus
Pearl Dsilva
Radu Todirica
Khachatur Nazaretyan
Abhishek Kumar