As rolling restart does not deallocate an IP before configuring it on a new VR, the code must allow it to be reused on a non-redundant VPCs gateway nic.
In crease ping counts to reduce intermittent failures in smoketests.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This ensure that fewer mount points are made on hosts for either
primary storagepools or secondary storagepools.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Using Source NAT option on Private Gateway does not work
This fixes#2680
## Description
<!--- Describe your changes in detail -->
When you use the Source NAT feature of Private Gateways on a VPC. This should Source NAT all traffic from CloudStack VMs going towards IPs reachable through Private Gateways.
This change in this PR, stops adding the Source CIDR to SNAT rules. This should be discussed/reviewed, but i can see no reason why the Source CIDR is needed. There can only be one SNAT IP per interface, except for Static (one-to-one) NATs, which still work with this change in place. The outbound interface is what matters in the rule.
<!-- For new features, provide link to FS, dev ML discussion etc. -->
<!-- In case of bug fix, the expected and actual behaviours, steps to reproduce. -->
##### SUMMARY
<!-- Explain the problem/feature briefly -->
There is a bug in the Private Gateway functionality, when Source NAT is enabled for the Private Gateway. When the SNAT is added to iptables, it has the source CIDR of the private gateway subnet. Since no VMs live in that private gateway subnet, the SNAT doesn’t work.
##### STEPS TO REPRODUCE
<!--
For bugs, show exactly how to reproduce the problem, using a minimal test-case. Use Screenshots if accurate.
For new features, show how the feature would be used.
-->
<!-- Paste example playbooks or commands between quotes below -->
Below is an example:
- VMs have IP addresses in the 10.0.0.0/24 subnet.
- The Private Gateway address is 10.101.141.2/30
In the outputs below, the SOURCE field for the new SNAT (eth3) only matches if the source is 10.101.141.0/30. Since the VM has an IP address in 10.0.0.0/24, the VMs don’t get SNAT’d as they should when talking across the private gateway. The SOURCE should be set to ANYWHERE.
##### BEFORE ADDING PRIVATE GATEWAY
~~~
Chain POSTROUTING (policy ACCEPT 1 packets, 52 bytes)
pkts bytes target prot opt in out source destination
2 736 SNAT all -- any eth2 10.0.0.0/24 anywhere to:10.0.0.1
16 1039 SNAT all -- any eth1 anywhere anywhere to:46.99.52.18
~~~
<!-- You can also paste gist.github.com links for larger files -->
##### EXPECTED RESULTS
<!-- What did you expect to happen when running the steps above? -->
~~~
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 SNAT all -- any eth3 anywhere anywhere to:10.101.141.2
2 736 SNAT all -- any eth2 anywhere anywhere to:10.0.0.1
23 1515 SNAT all -- any eth1 anywhere anywhere to:46.99.52.18
~~~
##### ACTUAL RESULTS
<!-- What actually happened? -->
<!-- Paste verbatim command output between quotes below -->
~~~
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 SNAT all -- any eth3 10.101.141.0/30 anywhere to:10.101.141.2
2 736 SNAT all -- any eth2 10.0.0.0/24 anywhere to:10.0.0.1
23 1515 SNAT all -- any eth1 anywhere anywhere to:46.99.52.18
~~~
## Types of changes
<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply: -->
- [ ] Breaking change (fix or feature that would cause existing functionality to change)
- [ ] New feature (non-breaking change which adds functionality)
- [X] Bug fix (non-breaking change which fixes an issue)
- [ ] Enhancement (improves an existing feature and functionality)
- [ ] Cleanup (Code refactoring and cleanup, that may add test cases)
## GitHub Issue/PRs
<!-- If this PR is to fix an issue or another PR on GH, uncomment the section and provide the id of issue/PR -->
<!-- When "Fixes: #<id>" is specified, the issue/PR will automatically be closed when this PR gets merged -->
<!-- For addressing multiple issues/PRs, use multiple "Fixes: #<id>" -->
Fixes: #2680
## Screenshots (if appropriate):
## How Has This Been Tested?
<!-- Please describe in detail how you tested your changes. -->
<!-- Include details of your testing environment, and the tests you ran to -->
<!-- see how your change affects other areas of the code, etc. -->
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
<!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
- [x] I have read the [CONTRIBUTING](https://github.com/apache/cloudstack/blob/master/CONTRIBUTING.md) document.
- [x] My code follows the code style of this project.
- [ ] My change requires a change to the documentation.
- [ ] I have updated the documentation accordingly.
Testing
- [ ] I have added tests to cover my changes.
- [ ] All relevant new and existing integration tests have passed.
- [ ] A full integration testsuite with all test that can run on my environment has passed.
* packaging: use libuuid x86_64 package for cloudstack-common
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 64 bit links is packaged
* post scan filter to exclude libuuid.so.1
* Revert "packaging: use libuuid x86_64 package for cloudstack-common"
This reverts commit b3fb8957fe.
* post scan filter to exclude libuuid.so.1 (centos63)
* revert removal of 32 bit support for vhd-util libs
* 4.11:
comment on unencryption
ui: fix create VPC dialog box failure when zone is SG enabled (#2704)
CLOUDSTACK-10381: Fix password reset / reset ssh key with ConfigDrive
isisnot=
extra message
debug message
imports
update without decrypt doesn't work
set unsensitive attributes as not 'Secure'
remove old config artifacts from update path
Not possible to deploy an Advanced zone with Security Groups, and VXLAN isolation method on KVM. Exception: "Unable to convert network offering with specified id to network profile" is logged.
In some environments running the keystore cert renewal (as root user)
over an already connected agent connection may cause exception
such as: `sudo: sorry, you must have a tty to run sudo`. Since, all
agents - KVM, CPVM and SSVM run as root user, we don't need to run
the renewal scripts with sudo.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Now the KVM agent checks whether a storage pool is mounted or not mounted before calling storagePoolCreateXML().
Signed-off-by: Kai Takahashi <k-takahashi@creationline.com>
Changes in PR #2508 have caused network restart to fail in a Nuage setup,
as the new VR takes the same IP as the old one, and the old VR is still running.
Nuage doesn't support multiple VM's having the same IP.
We delay provisioning the interfaces in VSD until the old VR interface is released.
* Create unit test cases for 'ConfigDriveBuilder' class
* add method 'getProgramToGenerateIso' as suggested by rohit and Daan
* fix encoding for base64 to StandardCharsets.US_ASCII
* fix MockServerTest.testIsMockServerCanUpgradeConnectionToSsl()
This is another method that is causing Jenkins to fail for almost a month
Wido den Hollander
dahn
Daan Hoogland
Rohit Yadav
Nicolas Vazquez
Rohit Yadav
Slair1
Mike Tutkowski
Paul Angus
Daan Hoogland
Mike Tutkowski
Frank Maximus
David Passante
cl-k-takahashi
Frank Maximus
Rafael Weingärtner
瓜@アイソマ:ゆるゆりはいいぞ