* Validate API IOPS normal and maximum read/write values.
Ensures that normal read/write cannot be greater than Maximum
read/write. Additionally, it was added a global settings
'iops.maximum.rate.length'.
'iops.maximum.rate.length' sets the maximum IOPS read/write length
(seconds) accepted; thus, preventing irrealistic values for a disk
offering (e.g. hours or days of burst IOPS). The default value is 0
(zero) and allows any IOPS maximum rate length. Example:
iops.maximum.rate.length = 3600 sets the maximum IOPS length
accepted for a disk offering as 3600 seconds (60 minutes).
* Fix log String.format message from %s to %d
* Add bytes rate validation
* Refactoring to cover Read/Write Bytes and IOPS length validation
* Fix "copy-paste" issue with bytes write rate max length
Change Response view to Full for Admin user
Co-authored-by: Pearl Dsilva <pearl.dsilva@shapeblue.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Remove constraint for NFS storage
* Add new property on agent.properties
* Add free disk space on the host prior template download
* Add unit tests for the free space check
* Fix free space check - retrieve avaiable size in bytes
* Update default location for direct download
* Improve the method to retrieve hosts to retry on depending on the destination pool type and scope
* Verify location for temporary download exists before checking free space
* In progress - refactor and extension
* Refactor and fix
* Last fixes and marvin tests
* Remove unused test file
* Improve logging
* Change default path for direct download
* Fix upload certificate
* Fix ISO failure after retry
* Fix metalink filename mismatch error
* Fix iso direct download
* Fix for direct download ISOs on local storage and shared mount point
* Last fix iso
* Fix VM migration with ISO
* Refactor volume migration to remove secondary storage intermediate
* Fix simulator issue
As previously described by PR #3929:
If vm has attached ISO, the migration fails with error message "org.libvirt.LibvirtException: Cannot access storage file /mnt/b33e5a1d-e4ea-3465-b6ac-c98dc8ff8af0/207-2-cc5fd717-2d57-3bb3-bcf6-2c930268db6c.iso"
* Userdata to display static NAT as public ip instead of VR ip
If static nat is enabled on VM then metadata service should return
the static nat instead of gateway IP.
If static not is not enabled then it should return the gateway IP
as the public IP
Test results:
Step to reproduce:
1. Create a vm
2. Ssh to vm.
3. Run the below command inside the vm
wget http://<VR public ip>/latest/meta-data/public-ipv4
Note down the output of the above command
4. Now acquire a new public and enable static NAT on that IP to this vm
5. Now run the same command mentioned above in the VM
This should display the static NAT ip instead of VR public IP
Output:
Before enabling static nat
wget http://10.10.10.40/latest/meta-data/public-ipv4
$ cat public-ipv4
10.10.10.29
After enabling static nat
wget http://10.10.10.40/latest/meta-data/public-ipv4
$ cat public-ipv4
10.11.10.30
* server: apply vm user data when release a public ip
Co-authored-by: Wei Zhou <ustcweizhou@gmail.com>
in 4.13, list sshkeypairs with keyword will ignore the search by name if name is specifed
Fixes an issue in #3098
for example,
(local) > list sshkeypairs name=wei keyword=wei filter=name
{
"count": 3,
"sshkeypair": [
{
"name": "wei3"
},
{
"name": "wei2"
},
{
"name": "wei"
}
]
}
with this patch ,it gives correct result.
(local) > list sshkeypairs name=wei keyword=wei filter=name
{
"count": 1,
"sshkeypair": [
{
"name": "wei"
}
]
}
The previous setup of many hours would not work, due to some internal dnsmasq issues - lease was set correclty, but dnsmasq was setting the dhcp-renew-time (and rebind time) to less than 2 years from the date the lease was issued.
Using "infinite" as the value (instead of the number) works as expected - and (atm) the renew date is set to year 2088, etc.
Co-authored-by: dahn <daan.hoogland@gmail.com>
When both routers of VPC is in MASTER state
then multiple alerts are sent equally to the number of tiers in the VPC.
If the VPC has 3 tiers then 6 alerts will be sent. This is not good
if VPC has more than 10 networks in it.
Instead of checking the router status for all the tiers in the VPC,
just check the status of the router for one tier in a VPC so that
multiple duplicate alerts can be avoided
Currently, the cloudstack sends VM password only to the first
router in the network even if its the backup and return the result.
In some cases the first router will be back up and the second will be master.
Since password server is not running in backup, when the user resets the password,
it is sent to the first router which can be backup.
In that case, the new password is not stored in the password server and users cant log in with a new password.
This change ensures that we send the password to both the routers instead
of the first router so that a new password is stored in the master router.
Bitworks LLC
pavanaravapalli
Nicolas Vazquez
Gabriel Beims Bräscher
Paul Angus
Pearl Dsilva
dahn
Radu Todirica
Wei Zhou
Khachatur Nazaretyan
Rohit Yadav
Abhishek Kumar
Andrija Panic
Spaceman1984
Wei Zhou
Rakesh